| Age | Commit message (Collapse) | Author |
|---|
|
And use meaningfull names for the constants.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-10-amir73il@gmail.com>
|
|
Move the s_fsnotify_connectors counter into the per-sb fsnotify state.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-9-amir73il@gmail.com>
|
|
Define a container struct fsnotify_sb_info to hold per-sb state,
including the reference to sb marks connector.
Allocate the fsnotify_sb_info state before attaching connector to any
object on the sb and free it only when killing sb.
This state is going to be used for storing per priority watched objects
counters.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-8-amir73il@gmail.com>
|
|
We would like to count watched objects by priority group, so we will need
to update the watched object counter after adding/removing marks.
Create a helper fsnotify_update_sb_watchers() and call it after
attaching/detaching a mark, instead of fsnotify_{get,put}_sb_watchers()
only after attaching/detaching a connector.
Soon, we will use this helper to count watched objects by the highest
watching priority group.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-7-amir73il@gmail.com>
|
|
Instead of passing fsnotify_connp_t, pass the pointer to the marked
object.
Store the object pointer in the connector and move the definition of
fsnotify_connp_t to internal fsnotify subsystem API, so it is no longer
used by fsnotify backends.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-6-amir73il@gmail.com>
|
|
In preparation to passing an object pointer to fsnotify_find_mark(), add
a wrapper fsnotify_find_inode_mark() and use it where possible.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-4-amir73il@gmail.com>
|
|
Instead of counting the number of connectors in an sb, we would like
to count the number of watched objects per priority group.
As a start, create an accessor fsnotify_sb_watched_objects() to
s_fsnotify_connectors and rename the fsnotify_{get,put}_sb_connectors()
helpers to fsnotify_{get,put}_sb_watchers() to better describes the
counter.
Increment the counter at the end of fsnotify_attach_connector_to_object()
if connector was attached instead of decrementing it on race to connect.
This is fine, because fsnotify_delete_sb() cannot be running in parallel
to fsnotify_attach_connector_to_object() which requires a reference to
a filesystem object.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-2-amir73il@gmail.com>
|
|
Add functionality to set and/or clear different attributes of the
machine as a confidential computing platform. Add the first one too:
whether the machine is running as a host for SEV-SNP guests.
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-5-bp@alien8.de
|
|
commit 772dd0342727 ("mm: enumerate all gfp flags") define gfp flags
with the help of BIT, while gfp_types.h doesn't include header file for
the definition. This through an error on building memblock tests.
Let's include linux/bits.h to fix it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Suren Baghdasaryan <surenb@google.com>
CC: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/r/20240402132701.29744-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Page events are not issued by device on the function if
page_request_disable is set, so no need to create pages EQ.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace matching on TCP and UDP protocols with new l4_type field which
is parsed by steering for ttc_table. It is enabled by the
outer_l4_type or inner_l4_type bits in nic_rx or port_sel flow table
capabilities and used only if pcc_ifa2 bit in HCA capabilities is set.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240402133043.56322-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the kernel, the preferred types are uX.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240402133043.56322-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The first "new features" pull request for v6.10 with changes both in
stack and in drivers. The big thing in this pull request is that
wireless subsystem is now almost free of sparse warnings. There's only
one warning left in ath11k which was introduced in v6.9-rc1 and will
be fixed via the wireless tree.
Realtek drivers continue to improve, now we have support for RTL8922AE
and RTL8723CS devices. ath11k also has long waited support for P2P.
This time we have a small conflict in iwlwifi, Stephen has an example
merge resolution which should help with fixing the conflict:
https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/
Major changes:
rtw89
* RTL8922AE Wi-Fi 7 PCI device support
rtw88
* RTL8723CS SDIO device support
iwlwifi
* don't support puncturing in 5 GHz
* support monitor mode on passive channels
* BZ-W device support
* P2P with HE/EHT support
ath11k
* P2P support for QCA6390, WCN6855 and QCA2066
* tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits)
wifi: mt76: mt7915: workaround dubious x | !y warning
wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings
wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings
wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask
net: rfkill: gpio: Convert to platform remove callback returning void
wifi: mac80211: use kvcalloc() for codel vars
wifi: iwlwifi: reconfigure TLC during HW restart
wifi: iwlwifi: mvm: don't change BA sessions during restart
wifi: iwlwifi: mvm: select STA mask only for active links
wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly
wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9
wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces
wifi: iwlwifi: mvm: Remove outdated comment
wifi: iwlwifi: add support for BZ_W
wifi: iwlwifi: Print a specific device name.
wifi: iwlwifi: remove wrong CRF_IDs
wifi: iwlwifi: remove devices that never came out
wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator
wifi: iwlwifi: mvm: fix active link counting during recovery
wifi: iwlwifi: mvm: assign link STA ID lookups during restart
...
====================
Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch implements only basic support.
It covers PHY used in multiple IC:
PHY: 88E3082, 88E3083
Switch: 88E6096, 88E6097
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240402201123.2961909-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kstack_offset variable was really only ever using the low bits for
kernel stack offset entropy. Add a ror32() to increase bit diffusion.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Link: https://lore.kernel.org/r/20240309202445.work.165-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches factors out some repeated code to clean up
firmware control read/write functions, and removes some redundant
control notification code.
base-commit: f193957b0fbbba397c8bddedf158b3bf7e4850fc
|
|
Add a new BPF instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF JITs.
We use a special BPF_MOV | BPF_ALU64 | BPF_X form with insn->off field
set to BPF_ADDR_PERCPU = -1. I used negative offset value to distinguish
them from positive ones used by user-exposed instructions.
Such instruction performs a resolution of a per-CPU offset stored in
a register to a valid kernel address which can be dereferenced. It is
useful in any use case where absolute address of a per-CPU data has to
be resolved (e.g., in inlining bpf_map_lookup_elem()).
BPF disassembler is also taught to recognize them to support dumping
final BPF assembly code (non-JIT'ed version).
Add arch-specific way for BPF JITs to mark support for this instructions.
This patch also adds support for these instructions in x86-64 BPF JIT.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240402021307.1012571-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is a common pattern for functions to take and release the DSP
pwr_lock over the cs_dsp calls to read and write firmware controls.
Add wrapper functions to do this sequence so that the calling code can
be simplified to a single function call..
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240325113127.112783-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Checkpatch warns that else is generally not necessary after a return
condition which exists in the if part of this function.
Hence, just to abide by what checkpatch recommends, follow it's
guidelines.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The device_wakeup_disable() call only returns an error if no dev exists,
but there's not much a user can do at that point.
Rather, make this function return void.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the pool alloc and free helper functions from the OP-TEE driver to
the TEE subsystem, since these could be reused in other TEE drivers.
This patch is not supposed to change behavior, it's only reorganizing
the code.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
No more users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For short netdev holds within a function there are still a lot of
users of dev_put() rather than netdev_put(). Add DEFINE_FREE() to
allow making those safer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new guard/scoped_gard can be useful for the RTNL as well,
so add a guard definition for it. It gets used like
{
guard(rtnl)();
// RTNL held until end of block
}
or
scoped_guard(rtnl) {
// RTNL held in this block
}
as with any other guard/scoped_guard.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 25559c22cef8 ("tee: add kernel internal client interface"),
it has been a common include/linux/tee_drv.h header file which is shared
to hold TEE subsystem internal bits along with the APIs exposed to the
TEE client drivers. However, this practice is prone to TEE subsystem
internal APIs abuse and especially so with the new TEE implementation
drivers being added to reuse existing functionality.
In order to address this split TEE subsystem internal bits as a separate
header file: include/linux/tee_core.h which should be the one used by
TEE implementation drivers. With that include/linux/tee_drv.h lists only
APIs exposed by TEE subsystem to the TEE client drivers.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Since we have pool->p.napi (Jakub) and pool->cpuid (Lorenzo) to check
whether it's safe to use direct recycling, we can use both globally for
each page instead of relying solely on @allow_direct argument.
Let's assume that @allow_direct means "I'm sure it's local, don't waste
time rechecking this" and when it's false, try the mentioned params to
still recycle the page directly. If neither is true, we'll lose some
CPU cycles, but then it surely won't be hotpath. On the other hand,
paths where it's possible to use direct cache, but not possible to
safely set @allow_direct, will benefit from this move.
The whole propagation of @napi_safe through a dozen of skb freeing
functions can now go away, which saves us some stack space.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240329165507.3240110-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change "a" to "an" according to the usual rules, fix an "if" that
was mistyped as "in", improve grammar in "considerable slow" ->
"considerably slower".
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240329-misc-rhashtable-v1-1-5862383ff798@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just rely on the xarray for any kind of bgid. This simplifies things, and
it really doesn't bring us much, if anything.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for capture events. Captured counter value for each channel
can be retrieved through CCRx register.
STM32 timers can have up to 4 capture channels (on input channel 1 to
channel 4), hence need to check the number of channels before reading
the capture data.
The capture configuration is hard-coded to capture signals on both edges
(non-inverted). Interrupts are used to report events independently for
each channel.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-11-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Now that there are two users for the "frequency" extension, introduce a
new COUNTER_COMP_FREQUENCY() macro.
This extension is intended to be a read-only signal attribute.
Suggested-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240306153631.4051115-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Remove the @priv: line to prevent the kernel-doc warning:
include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f2ee4759fb70 ("counter: remove old and now unused registration API")
Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
This patch improves the run-time calculation for program stats by
capturing the duration as soon as possible after the program returns.
Previously, the duration included u64_stats_t operations. While the
instrumentation overhead is part of the total time spent when stats are
enabled, distinguishing between the program's native execution time and
the time spent due to instrumentation is crucial for accurate
performance analysis.
By making this change, the patch facilitates more precise optimization
of BPF programs, enabling users to understand their performance in
environments without stats enabled.
I used a virtualized environment to measure the run-time over one minute
for a basic raw_tracepoint/sys_enter program, which just increments a
local counter. Although the virtualization introduced some performance
degradation that could affect the results, I observed approximately a
16% decrease in average run-time reported by stats with this change
(310 -> 260 nsec).
Signed-off-by: Jose Fernandez <josef@netflix.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402034010.25060-1-josef@netflix.com
|
|
Modules registering driver with sdio_register_driver() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Since many drivers forget to set the .owner, this effectively will fix
them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010,
libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano,
wilc1000, wl1251 and more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Backmerging to get v6.9-rc2 changes into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are things in linux/genetlink.h which are only used
under net/netlink/. Move them to a new local header.
A new header with just 2 externs isn't great, but alternative
would be to include af_netlink.h in genetlink.c which feels
even worse.
Link: https://lore.kernel.org/r/20240329175710.291749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the driver with a new interface to be used for VF live migration.
This allows to create and destroy a qat_mig_dev object that contains
a set of methods to allow to save and restore the state of QAT VF.
This interface will be used by the qat-vfio-pci module.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a simple combination of bio_list_merge + bio_list_init
similar to list_splice_init. While it only saves a single
line in a callers, it makes the move all bios from one list to
another and reinitialize the original pattern a lot more obvious
in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
suspend/hibernation
Currently, ath11k fails to resume from system suspend/hibernation on some
the x86 host machines with below error message:
```
ath11k_pci 0000:06:00.0: timeout while waiting for restart complete
```
This happens because, ath11k powers down the MHI stack during suspend and
that leads to destruction of the struct device associated with the MHI
channels. And during resume, ath11k calls calling mhi_sync_power_up() to
power up the MHI subsystem and that eventually calls the driver framework's
device_add() API from mhi_create_devices(). But the PM framework blocks the
struct device creation during device_add() and this leads to probe deferral
as below:
```
mhi mhi0_IPCR: Driver qcom_mhi_qrtr force probe deferral
```
The reason for deferring device creation during resume is explained in
dpm_prepare():
/*
* It is unsafe if probing of devices will happen during suspend or
* hibernation and system behavior will be unpredictable in this
* case. So, let's prohibit device's probing here and defer their
* probes instead. The normal behavior will be restored in
* dpm_complete().
*/
Due to the device probe deferral, qcom_mhi_qrtr_probe() API is not getting
called during resume and thus MHI channels are not prepared. So this blocks
the QMI messages from being transferred between ath11k and firmware,
resulting in a firmware initialization failure.
After consulting with Rafael, it was decided to not destroy the struct
device for the MHI channels during system suspend/hibernation because the
device is bound to appear again during resume.
So to achieve this, a new API called mhi_power_down_keep_dev() is
introduced for MHI controllers to keep the struct device when required.
This API is similar to the existing mhi_power_down() API, except that it
keeps the struct device associated with MHI channels instead of destroying
them.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240305021320.3367-2-quic_bqiang@quicinc.com
[mani: reworded the commit message and subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update health reading to match.
As health is not checked for changes as part of the update loop, remove
the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update cycle count reading to match.
As cycle count is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update energy reading to match.
As energy is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update charge reading to match.
As charge state is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update time reading to match.
As time is not checked for changes as part of the update loop, remove
the read of the this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update temperature reading to match.
As temp is not checked for changes as part of the update loop, remove
the read of the temperature from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Commit 14d898f3c1b3 ("dev: Move received_rps counter next
to RPS members in softnet data") was unfortunate:
received_rps is dirtied by a cpu and never read by other
cpus in fast path.
Its presence in the hot RPS cache line (shared by many cpus)
is hurting RPS/RFS performance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
input_queue_tail_incr_save() is incrementing the sd queue_tail
and save it in the flow last_qtail.
Two issues here :
- no lock protects the write on last_qtail, we should use appropriate
annotations.
- We can perform this write after releasing the per-cpu backlog lock,
to decrease this lock hold duration (move away the cache line miss)
Also move input_queue_head_incr() and rps helpers to include/net/rps.h,
while adding rps_ prefix to better reflect their role.
v2: Fixed a build issue (Jakub and kernel build bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If under extreme cpu backlog pressure enqueue_to_backlog() has
to drop a packet, it could do this without dirtying a cache line
and potentially slowing down the target cpu.
Move sd->dropped into a separate cache line, and make it atomic.
In non pressure mode, this field is not touched, no need to consume
valuable space in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move dev_xmit_recursion() and friends to net/core/dev.h
They are only used from net/core/dev.c and net/core/filter.c.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
