summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2022-02-23net/mlx5: cmdif, cmd_check refactoringSaeed Mahameed
Do not mangle the command outbox in the internal low level cmd_exec and cmd_invoke functions. Instead return a proper unique error code and move the driver error checking to be at a higher level in mlx5_cmd_exec(). Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23net/mlx5: Add ability to insert to specific flow groupMark Bloch
If the flow table isn't an autogroup the upper driver has to create the flow groups explicitly. This information can't later be used when creating rules to insert into a specific flow group. Allow such use case. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23mlx5: remove unused static inlinesJakub Kicinski
mlx5 has some unused static inline helpers in include/ while at it also clean static inlines in the driver itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-23Merge tag 'drm-intel-gt-next-2022-02-17' of ↵Rodrigo Vivi
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next UAPI Changes: - Weak parallel submission support for execlists Minimal implementation of the parallel submission support for execlists backend that was previously only implemented for GuC. Support one sibling non-virtual engine. Core Changes: - Two backmerges of drm/drm-next for header file renames/changes and i915_regs reorganization Driver Changes: - Add new DG2 subplatform: DG2-G12 (Matt R) - Add new DG2 workarounds (Matt R, Ram, Bruce) - Handle pre-programmed WOPCM registers for DG2+ (Daniele) - Update guc shim control programming on XeHP SDV+ (Daniele) - Add RPL-S C0/D0 stepping information (Anusha) - Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas) - Fix KMD and GuC race on accessing PMU busyness (Umesh) - Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh) - Report error on invalid reset notification from GuC (John) - Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston) - Fixes to parallel submission implementation (Matt B.) - Improve GuC loading status check/error reports (John) - Tweak TTM LRU priority hint selection (Matt A.) - Align the plane_vma to min_page_size of stolen mem (Ram) - Introduce vma resources and implement async unbinding (Thomas) - Use struct vma_resource instead of struct vma_snapshot (Thomas) - Return some TTM accel move errors instead of trying memcpy move (Thomas) - Fix a race between vma / object destruction and unbinding (Thomas) - Remove short-term pins from execbuf (Maarten) - Update to GuC version 69.0.3 (John, Michal Wa.) - Improvements to GT reset paths in GuC backend (Matt B.) - Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko) - Use trylock instead of blocking lock when freeing GEM objects (Maarten) - Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.) - Fixes to object unmapping and purging (Matt A) - Check for wedged device in GuC backend (John) - Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten) - Allow dead vm to unbind vma's without lock (Maarten) - s/engine->i915/i915/ for DG2 engine workarounds (Matt R) - Use to_gt() helper for GGTT accesses (Michal Wi.) - Selftest improvements (Matt B., Thomas, Ram) - Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip rerere cache update")]
2022-02-23Merge tag 'slab-for-5.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - Build fix (workaround) for clang. - Fix a /proc/kcore based slabinfo script broken by struct slab changes in 5.17-rc1. * tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: tools/cgroup/slabinfo: update to work with struct slab slab: remove __alloc_size attribute from __kmalloc_track_caller
2022-02-23powercap/dtpm: Destroy hierarchy functionDaniel Lezcano
The hierarchy creation function exits but without a destroy hierarchy function. Due to that, the modules creating the hierarchy can not be unloaded properly because they don't have an exit callback. Provide the dtpm_destroy_hierarchy() function to remove the previously created hierarchy. The function relies on all the release mechanisms implemented by the underlying powercap framework. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220130210210.549877-4-daniel.lezcano@linaro.org
2022-02-23kernfs: move struct kernfs_root out of the public view.Greg Kroah-Hartman
There is no need to have struct kernfs_root be part of kernfs.h for the whole kernel to see and poke around it. Move it internal to kernfs code and provide a helper function, kernfs_root_to_node(), to handle the one field that kernfs users were directly accessing from the structure. Cc: Imran Khan <imran.f.khan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220222070713.3517679-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23nvme-tcp: send H2CData PDUs based on MAXH2CDATAVarun Prakash
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-23Merge tag 'irq-api-2022-02-21' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into i2c/for-mergewindow Provide a tag for maintainers to pull the generic_handle_irq_safe() API.
2022-02-23net: bridge: Add support for bridge port in locked modeHans Schultz
In a 802.1X scenario, clients connected to a bridge port shall not be allowed to have traffic forwarded until fully authenticated. A static fdb entry of the clients MAC address for the bridge port unlocks the client and allows bidirectional communication. This scenario is facilitated with setting the bridge port in locked mode, which is also supported by various switchcore chipsets. Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23drop_monitor: remove quadratic behaviorEric Dumazet
drop_monitor is using an unique list on which all netdevices in the host have an element, regardless of their netns. This scales poorly, not only at device unregister time (what I caught during my netns dismantle stress tests), but also at packet processing time whenever trace_napi_poll_hit() is called. If the intent was to avoid adding one pointer in 'struct net_device' then surely we prefer O(1) behavior. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-23sched/headers: Make the <linux/sched/deadline.h> header build standaloneIngo Molnar
This header depends on various scheduler definitions. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-23sched/headers: Add initial new headers as identity mappingsIngo Molnar
This allows code sharing between fast-headers tree and the vanilla scheduler tree. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-23sched/headers: Fix header to build standalone: <linux/sched_clock.h>Ingo Molnar
Uses various kernel types that don't build standalone. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22net: preserve skb_end_offset() in skb_unclone_keeptruesize()Eric Dumazet
syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c4777efa751d ("net: add and use skb_unclone_keeptruesize() helper") Fixes: 097b9146c0e2 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-22net: add skb_set_end_offset() helperEric Dumazet
We have multiple places where this helper is convenient, and plan using it in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-22scsi: block: Remove REQ_OP_WRITE_SAME supportChristoph Hellwig
No more users of REQ_OP_WRITE_SAME or drivers implementing it are left, so remove the infrastructure. [mkp: fold in and tweak sysfs reporting fix] Link: https://lore.kernel.org/r/20220209082828.2629273-8-hch@lst.de Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: dm: Remove WRITE_SAME supportChristoph Hellwig
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start deleting it. Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22kasan: split kasan_*enabled() functions into a separate headerPeter Collingbourne
In an upcoming commit we are going to need to call kasan_hw_tags_enabled() from arch/arm64/include/asm/mte.h. This would create a circular dependency between headers if KASAN_GENERIC or KASAN_SW_TAGS is enabled: linux/kasan.h -> linux/pgtable.h -> asm/pgtable.h -> asm/mte.h -> linux/kasan.h. Break the cycle by introducing a new header linux/kasan-enabled.h with the kasan_*enabled() functions that can be included from asm/mte.h. Link: https://linux-review.googlesource.com/id/I5b0d96c6ed0026fc790899e14d42b2fac6ab568e Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20220219012945.894950-1-pcc@google.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22fork: Move task stack accounting to do_exit()Sebastian Andrzej Siewior
There is no need to perform the stack accounting of the outgoing task in its final schedule() invocation which happens with preemption disabled. The task is leaving, the resources will be freed and the accounting can happen in do_exit() before the actual schedule invocation which frees the stack memory. Move the accounting of the stack memory from release_task_stack() to exit_task_stack_account() which then can be invoked from do_exit(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-7-bigeasy@linutronix.de
2022-02-22vfio/pci: Stub vfio_pci_vga_rw when !CONFIG_VFIO_PCI_VGAAlex Williamson
Resolve build errors reported against UML build for undefined ioport_map() and ioport_unmap() functions. Without this config option a device cannot have vfio_pci_core_device.has_vga set, so the existing function would always return -EINVAL anyway. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20220123125737.2658758-1-geert@linux-m68k.org Link: https://lore.kernel.org/r/164306582968.3758255.15192949639574660648.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-02-22linkage: remove SYM_FUNC_{START,END}_ALIAS()Mark Rutland
Now that all aliases are defined using SYM_FUNC_ALIAS(), remove the old SYM_FUNC_{START,END}_ALIAS() macros. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-5-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()Mark Rutland
Currently aliasing an asm function requires adding START and END annotations for each name, as per Documentation/asm-annotations.rst: SYM_FUNC_START_ALIAS(__memset) SYM_FUNC_START(memset) ... asm insns ... SYM_FUNC_END(memset) SYM_FUNC_END_ALIAS(__memset) This is more painful than necessary to maintain, especially where a function has many aliases, some of which we may wish to define conditionally. For example, arm64's memcpy/memmove implementation (which uses some arch-specific SYM_*() helpers) has: SYM_FUNC_START_ALIAS(__memmove) SYM_FUNC_START_ALIAS_WEAK_PI(memmove) SYM_FUNC_START_ALIAS(__memcpy) SYM_FUNC_START_WEAK_PI(memcpy) ... asm insns ... SYM_FUNC_END_PI(memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_END_ALIAS(__memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_END_ALIAS_PI(memmove) EXPORT_SYMBOL(memmove) SYM_FUNC_END_ALIAS(__memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_START(name) It would be much nicer if we could define the aliases *after* the standard function definition. This would avoid the need to specify each symbol name twice, and would make it easier to spot the canonical function definition. This patch adds new macros to allow us to do so, which allows the above example to be rewritten more succinctly as: SYM_FUNC_START(__pi_memcpy) ... asm insns ... SYM_FUNC_END(__pi_memcpy) SYM_FUNC_ALIAS(__memcpy, __pi_memcpy) EXPORT_SYMBOL(__memcpy) SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy) EXPORT_SYMBOL(memcpy) SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy) SYM_FUNC_ALIAS(__memmove, __pi_memmove) EXPORT_SYMBOL(__memmove) SYM_FUNC_ALIAS_WEAK(memmove, __memmove) EXPORT_SYMBOL(memmove) The reduction in duplication will also make it possible to replace some uses of WEAK with more accurate Kconfig guards, e.g. #ifndef CONFIG_KASAN SYM_FUNC_ALIAS(memmove, __memmove) EXPORT_SYMBOL(memmove) #endif ... which should make it easier to ensure that symbols are neither used nor overidden unexpectedly. The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are marked as deprecated, and will be removed once existing users are moved over to the new scheme. The tools/perf/ copy of linkage.h is updated to match. A subsequent patch will depend upon this when updating the x86 asm annotations. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-22dm: cleanup double word in commentTom Rix
Remove the second 'a'. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-21dm: add dm_submit_bio_remap interfaceMike Snitzer
Where possible, switch from early bio-based IO accounting (at the time DM clones each incoming bio) to late IO accounting just before each remapped bio is issued to underlying device via submit_bio_noacct(). Allows more precise bio-based IO accounting for DM targets that use their own workqueues to perform additional processing of each bio in conjunction with their DM_MAPIO_SUBMITTED return from their map function. When a target is updated to use dm_submit_bio_remap() they must also set ti->accounts_remapped_io to true. Use xchg() in start_io_acct(), as suggested by Mikulas, to ensure each IO is only started once. The xchg race only happens if __send_duplicate_bios() sends multiple bios -- that case is reflected via tio->is_duplicate_bio. Given the niche nature of this race, it is best to avoid any xchg performance penalty for normal IO. For IO that was never submitted with dm_bio_submit_remap(), but the target completes the clone with bio_endio, accounting is started then ended and pending_io counter decremented. Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-21random: clear fast pool, crng, and batches in cpuhp bring upJason A. Donenfeld
For the irq randomness fast pool, rather than having to use expensive atomics, which were visibly the most expensive thing in the entire irq handler, simply take care of the extreme edge case of resetting count to zero in the cpuhp online handler, just after workqueues have been reenabled. This simplifies the code a bit and lets us use vanilla variables rather than atomics, and performance should be improved. As well, very early on when the CPU comes up, while interrupts are still disabled, we clear out the per-cpu crng and its batches, so that it always starts with fresh randomness. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21random: pull add_hwgenerator_randomness() declaration into random.hJason A. Donenfeld
add_hwgenerator_randomness() is a function implemented and documented inside of random.c. It is the way that hardware RNGs push data into it. Therefore, it should be declared in random.h. Otherwise sparse complains with: random.c:1137:6: warning: symbol 'add_hwgenerator_randomness' was not declared. Should it be static? The alternative would be to include hw_random.h into random.c, but that wouldn't really be good for anything except slowing down compile time. Cc: Matt Mackall <mpm@selenic.com> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21random: remove useless header commentJason A. Donenfeld
This really adds nothing at all useful. Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21random: make more consistent use of integer typesJason A. Donenfeld
We've been using a flurry of int, unsigned int, size_t, and ssize_t. Let's unify all of this into size_t where it makes sense, as it does in most places, and leave ssize_t for return values with possible errors. In addition, keeping with the convention of other functions in this file, functions that are dealing with raw bytes now take void * consistently instead of a mix of that and u8 *, because much of the time we're actually passing some other structure that is then interpreted as bytes by the function. We also take the opportunity to fix the outdated and incorrect comment in get_random_bytes_arch(). Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-21nvmem: core: Remove unused devm_nvmem_unregister()Andy Shevchenko
There are no users and seems no will come of the devm_nvmem_unregister(). Remove the function and remove the unused devm_nvmem_match() along with it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220220151527.17216-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios propertyChristophe Kerello
Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21Merge tag 'v5.17-rc5' into sched/core, to resolve conflictsIngo Molnar
New conflicts in sched/core due to the following upstream fixes: 44585f7bc0cb ("psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n") a06247c6804f ("psi: Fix uaf issue when psi trigger is destroyed while being polled") Conflicts: include/linux/psi_types.h kernel/sched/psi.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-02-21firmware: arm_scmi: Add support for clock_enable_latencyCristian Marussi
An SCMI platform can optionally advertise an enable latency typically associated with a specific clock resource: add support for parsing such optional message field and export such information in the usual publicly accessible clock descriptor. Link: https://lore.kernel.org/r/20220217131234.50328-8-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Add atomic support to clock protocolCristian Marussi
Introduce new _atomic variant for SCMI clock protocol operations related to enable disable operations: when an atomic operation is required the xfer poll_completion flag is set for that transaction. Link: https://lore.kernel.org/r/20220217131234.50328-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Support optional system wide atomic-threshold-usCristian Marussi
An SCMI agent can be configured system-wide with a well-defined atomic threshold: only SCMI synchronous command whose latency has been advertised by the SCMI platform to be lower or equal to this configured threshold will be considered for atomic operations, when requested and if supported by the underlying transport at all. Link: https://lore.kernel.org/r/20220217131234.50328-6-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21slab: remove __alloc_size attribute from __kmalloc_track_callerGreg Kroah-Hartman
Commit c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") added __alloc_size attributes to a bunch of kmalloc function prototypes. Unfortunately the change to __kmalloc_track_caller seems to cause clang to generate broken code and the first time this is called when booting, the box will crash. While the compiler problems are being reworked and attempted to be solved [1], let's just drop the attribute to solve the issue now. Once it is resolved it can be added back. [1] https://github.com/ClangBuiltLinux/linux/issues/1599 Fixes: c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") Cc: stable <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Nathan Chancellor <nathan@kernel.org> Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Cc: llvm@lists.linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20220218131358.3032912-1-gregkh@linuxfoundation.org
2022-02-21genirq: Provide generic_handle_irq_safe()Sebastian Andrzej Siewior
Provide generic_handle_irq_safe() which can used from any context. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220211181500.1856198-2-bigeasy@linutronix.de
2022-02-21x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation ↵Josh Poimboeuf
reporting With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable to Spectre v2 BHB-based attacks. When both are enabled, print a warning message and report it in the 'spectre_v2' sysfs vulnerabilities file. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2022-02-20Merge tag 'sched_urgent_for_v5.17_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Fix task exposure order when forking tasks" * tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix yet more sched_fork() races
2022-02-20net: tcp: use tcp_drop_reason() for tcp_data_queue_ofo()Menglong Dong
Replace tcp_drop() used in tcp_data_queue_ofo with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_OFOMERGE Reviewed-by: Mengen Sun <mengensun@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20net: tcp: use tcp_drop_reason() for tcp_data_queue()Menglong Dong
Replace tcp_drop() used in tcp_data_queue() with tcp_drop_reason(). Following drop reasons are introduced: SKB_DROP_REASON_TCP_ZEROWINDOW SKB_DROP_REASON_TCP_OLD_DATA SKB_DROP_REASON_TCP_OVERWINDOW SKB_DROP_REASON_TCP_OLD_DATA is used for the case that end_seq of skb less than the left edges of receive window. (Maybe there is a better name?) Reviewed-by: Mengen Sun <mengensun@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20net: tcp: use tcp_drop_reason() for tcp_rcv_established()Menglong Dong
Replace tcp_drop() used in tcp_rcv_established() with tcp_drop_reason(). Following drop reasons are added: SKB_DROP_REASON_TCP_FLAGS Reviewed-by: Mengen Sun <mengensun@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20net: tcp: add skb drop reasons to tcp_add_backlog()Menglong Dong
Pass the address of drop_reason to tcp_add_backlog() to store the reasons for skb drops when fails. Following drop reasons are introduced: SKB_DROP_REASON_SOCKET_BACKLOG Reviewed-by: Mengen Sun <mengensun@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20net: tcp: add skb drop reasons to tcp_v{4,6}_inbound_md5_hash()Menglong Dong
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this function fails. Therefore, the drop reason can be passed to kfree_skb_reason() when the skb needs to be freed. Following drop reasons are added: SKB_DROP_REASON_TCP_MD5NOTFOUND SKB_DROP_REASON_TCP_MD5UNEXPECTED SKB_DROP_REASON_TCP_MD5FAILURE SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5* Reviewed-by: Mengen Sun <mengensun@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19iosys-map: Add a few more helpersLucas De Marchi
First the simplest ones: - iosys_map_memset(): when abstracting system and I/O memory, just like the memcpy() use case, memset() also has dedicated functions to be called for using IO memory. - iosys_map_memcpy_from(): we may need to copy data from I/O memory, not only to. In certain situations it's useful to be able to read or write to an offset that is calculated by having the memory layout given by a struct declaration. Usually we are going to read/write a u8, u16, u32 or u64. As a pre-requisite for the implementation, add iosys_map_memcpy_from() to be the equivalent of iosys_map_memcpy_to(), but in the other direction. Then add 2 pairs of macros: - iosys_map_rd() / iosys_map_wr() - iosys_map_rd_field() / iosys_map_wr_field() The first pair takes the C-type and offset to read/write. The second pair uses a struct describing the layout of the mapping in order to calculate the offset and size being read/written. We could use readb, readw, readl, readq and the write* counterparts, however due to alignment issues this may not work on all architectures. If alignment needs to be checked to call the right function, it's not possible to decide at compile-time which function to call: so just leave the decision to the memcpy function that will do exactly that. Finally, in order to use the above macros with a map derived from another, add another initializer: IOSYS_MAP_INIT_OFFSET(). v2: - Rework IOSYS_MAP_INIT_OFFSET() so it doesn't rely on aliasing rules within the union - Add offset to both iosys_map_rd_field() and iosys_map_wr_field() to allow the struct itself to be at an offset from the mapping - Add documentation to iosys_map_rd_field() with example and expected memory layout v3: - Drop kernel.h include as it's not needed anymore Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-3-lucas.demarchi@intel.com
2022-02-19iosys-map: Add offset to iosys_map_memcpy_to()Lucas De Marchi
In certain situations it's useful to be able to write to an offset of the mapping. Add a dst_offset to iosys_map_memcpy_to(). Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-2-lucas.demarchi@intel.com
2022-02-20ata: add/use ata_taskfile::{error|status} fieldsSergey Shtylyov
Add the explicit error and status register fields to 'struct ata_taskfile' using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and update the libata taskfile code accordingly. There should be no object code changes resulting from that... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-02-19net: phylink: remove phylink_config's pcs_pollRussell King (Oracle)
phylink_config's pcs_poll is no longer used, let's get rid of it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19sched/preempt: Add PREEMPT_DYNAMIC using static keysMark Rutland
Where an architecture selects HAVE_STATIC_CALL but not HAVE_STATIC_CALL_INLINE, each static call has an out-of-line trampoline which will either branch to a callee or return to the caller. On such architectures, a number of constraints can conspire to make those trampolines more complicated and potentially less useful than we'd like. For example: * Hardware and software control flow integrity schemes can require the addition of "landing pad" instructions (e.g. `BTI` for arm64), which will also be present at the "real" callee. * Limited branch ranges can require that trampolines generate or load an address into a register and perform an indirect branch (or at least have a slow path that does so). This loses some of the benefits of having a direct branch. * Interaction with SW CFI schemes can be complicated and fragile, e.g. requiring that we can recognise idiomatic codegen and remove indirections understand, at least until clang proves more helpful mechanisms for dealing with this. For PREEMPT_DYNAMIC, we don't need the full power of static calls, as we really only need to enable/disable specific preemption functions. We can achieve the same effect without a number of the pain points above by using static keys to fold early returns into the preemption functions themselves rather than in an out-of-line trampoline, effectively inlining the trampoline into the start of the function. For arm64, this results in good code generation. For example, the dynamic_cond_resched() wrapper looks as follows when enabled. When disabled, the first `B` is replaced with a `NOP`, resulting in an early return. | <dynamic_cond_resched>: | bti c | b <dynamic_cond_resched+0x10> // or `nop` | mov w0, #0x0 | ret | mrs x0, sp_el0 | ldr x0, [x0, #8] | cbnz x0, <dynamic_cond_resched+0x8> | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret ... compared to the regular form of the function: | <__cond_resched>: | bti c | mrs x0, sp_el0 | ldr x1, [x0, #8] | cbz x1, <__cond_resched+0x18> | mov w0, #0x0 | ret | paciasp | stp x29, x30, [sp, #-16]! | mov x29, sp | bl <preempt_schedule_common> | mov w0, #0x1 | ldp x29, x30, [sp], #16 | autiasp | ret Any architecture which implements static keys should be able to use this to implement PREEMPT_DYNAMIC with similar cost to non-inlined static calls. Since this is likely to have greater overhead than (inlined) static calls, PREEMPT_DYNAMIC is only defaulted to enabled when HAVE_PREEMPT_DYNAMIC_CALL is selected. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220214165216.2231574-6-mark.rutland@arm.com
2022-02-19sched/preempt: Simplify irqentry_exit_cond_resched() callersMark Rutland
Currently callers of irqentry_exit_cond_resched() need to be aware of whether the function should be indirected via a static call, leading to ugly ifdeffery in callers. Save them the hassle with a static inline wrapper that does the right thing. The raw_irqentry_exit_cond_resched() will also be useful in subsequent patches which will add conditional wrappers for preemption functions. Note: in arch/x86/entry/common.c, xen_pv_evtchn_do_upcall() always calls irqentry_exit_cond_resched() directly, even when PREEMPT_DYNAMIC is in use. I believe this is a latent bug (which this patch corrects), but I'm not entirely certain this wasn't deliberate. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220214165216.2231574-4-mark.rutland@arm.com
generated by cgit (git 2.34.1) at 2025-09-13 06:17:33 +0000