| Age | Commit message (Collapse) | Author |
|---|
|
Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX
device data structures instead of using structure defined specifically for
mlx5_ib module.
Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Silence documentation build warnings by correcting kernel-doc comment
for spi_transfer struct.
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200725050242.279548-1-colton.w.lewis@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the host command number 0x012B conflicts with other EC host
command, add one to all regulator control related host command.
Also fix a wrong alignment on struct and sync the comment with the one
in ChromeOS EC codebase.
Fixes: dff08caf35ec ("platform/chrome: cros_ec: Add command for regulator control.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200724080358.619245-1-pihsun@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Modern Intel Mobile platforms support power limit4 (PL4), which is
the SoC package level maximum power limit (in Watts). It can be used
to preemptively limits potential SoC power to prevent power spikes
from tripping the power adapter and battery over-current protection.
This patch enables this feature by exposing package level peak power
capping control to userspace via RAPL sysfs interface. With this,
application like DTPF can modify PL4 power limit, the similar way
of other package power limit (PL1).
As this feature is not tested on previous generations, here it is
enabled only for the platform that has been verified to work,
for safety concerns.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Co-developed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, acpi.info is an invalid link to access ACPI specification,
the new valid link is https://uefi.org/specifications.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This way, when the dev_pm_ops instance is not referenced anywhere, it
will simply be dropped by the compiler without a warning.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This macro is analogous to the infamous of_match_ptr(). If CONFIG_PM
is enabled, this macro will resolve to its argument, otherwise to NULL.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
we need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This reverts commit 2d38dbf89a06d0f689daec9842c5d3295c49777f as it broke
the build in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2d38dbf89a06 ("test_firmware: Test platform fw loading on non-EFI systems")
Cc: stable@vger.kernel.org
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727165539.0e8797ab@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This should resolve the merge/build issues reported when trying to
create linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including device.h is too much for the dma-dw.h platform data header.
Replace it with the headers of which dma-dw.h is direct user.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200721130844.64162-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
IP core of the DW DMA controller may be synthesized with different
max burst length of the transfers per each channel. According to Synopsis
having the fixed maximum burst transactions length may provide some
performance gain. At the same time setting up the source and destination
multi size exceeding the max burst length limitation may cause a serious
problems. In our case the DMA transaction just hangs up. In order to fix
this lets introduce the max burst length platform config of the DW DMA
controller device and don't let the DMA channels configuration code
exceed the burst length hardware limitation.
Note the maximum burst length parameter can be detected either in runtime
from the DWC parameter registers or from the dedicated DT property.
Depending on the IP core configuration the maximum value can vary from
channel to channel so by overriding the channel slave max_burst capability
we make sure a DMA consumer will get the channel-specific max burst
length.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to the DW APB DMAC data book the minimum burst transaction
length is 1 and it's true for any version of the controller since
isn't parametrised in the coreAssembler so can't be changed at the
IP-core synthesis stage. The maximum burst transaction can vary from
channel to channel and from controller to controller depending on a
IP-core parameter the system engineer activated during the IP-core
synthesis. Let's initialise both min_burst and max_burst members of the
DMA controller descriptor with extreme values so the DMA clients could
use them to properly optimize the DMA requests. The channels and
controller-specific max_burst length initialization will be introduced
by the follow-up patches.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are DMA devices (like ours version of Synopsys DW DMAC) which have
DMA capabilities non-uniformly redistributed between the device channels.
In order to provide a way of exposing the channel-specific parameters to
the DMA engine consumers, we introduce a new DMA-device callback. In case
if provided it gets called from the dma_get_slave_caps() method and is
able to override the generic DMA-device capabilities.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some devices may lack the support of the hardware accelerated SG list
entries automatic walking through and execution. In this case a burden of
the SG list traversal and DMA engine re-initialization lies on the
DMA engine driver (normally implemented by using a DMA transfer completion
IRQ to recharge the DMA device with a next SG list entry). But such
solution may not be suitable for some DMA consumers. In particular SPI
devices need both Tx and Rx DMA channels work synchronously in order
to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for
some time while the Tx DMA channel works implicitly pulling data into the
Rx FIFO, the later will be eventually overflown, which will cause the data
loss. So if SG list entries aren't automatically fetched by the DMA
engine, but are one-by-one manually selected for execution in the
ISRs/deferred work/etc., such problem will eventually happen due to the
non-deterministic latencies of the service execution.
In order to let the DMA consumer know about the DMA device capabilities
regarding the hardware accelerated SG list traversal we introduce the
max_sg_burst capability. It is supposed to be initialized by the DMA engine
driver with 0 if there is no limitation of the number of SG entries
atomically executed and with non-zero value if there is such constraints,
so the upper limit is determined by the number set to the property.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some hardware aside from default 0/1 may have greater minimum burst
transactions length constraints. Here we introduce the DMA device
and slave capability, which if required can be initialized by the DMA
engine driver with the device-specific value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As it stands if you include printk.h by itself it will fail to
compile because it requires definitions from ratelimit.h. However,
simply including ratelimit.h from printk.h does not work due to
inclusion loops involving sched.h and kernel.h.
This patch solves this by moving bits from ratelimit.h into a new
header file which can then be included by printk.h without any
worries about header loops.
The build bot then revealed some intriguing failures arising out
of this patch. On s390 there is an inclusion loop with asm/bug.h
and linux/kernel.h that triggers a compile failure, because kernel.h
will cause asm-generic/bug.h to be included before s390's own
asm/bug.h has finished processing. This has been fixed by not
including kernel.h in arch/s390/include/asm/bug.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: https://lore.kernel.org/r/20200721062248.GA18383@gondor.apana.org.au
|
|
The newly introduced IRQCHIP_PLATFORM_DRIVER_* macros expand into
module-related macros, but do so without including module.h.
Depending on the driver and/or architecture, this happens to work,
or not.
Unconditionnaly include linux/module.h to sort it out.
Fixes: f3b5e608ed6d ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Compiling an irqchip driver as a platform driver needs to bunch of
things to be done right:
- Making sure the parent domain is initialized first
- Making sure the device can't be unbound from sysfs
- Disallowing module unload if it's built as a module
- Finding the parent node
- Etc.
Instead of trying to make sure all future irqchip platform drivers get
this right, provide boilerplate macros that take care of all of this.
An example use would look something like this. Where acme_foo_init and
acme_bar_init are similar to what would be passed to IRQCHIP_DECLARE.
IRQCHIP_PLATFORM_DRIVER_BEGIN(acme_irq)
IRQCHIP_MATCH("acme,foo", acme_foo_init)
IRQCHIP_MATCH("acme,bar", acme_bar_init)
IRQCHIP_PLATFORM_DRIVER_END(acme_irq)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200718000637.3632841-2-saravanak@google.com
|
|
Drop the repeated word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200719002853.20419-1-rdunlap@infradead.org
|
|
[maz: The GICv3 spec has evolved quite a bit since the draft the Linux
driver was written against, and some register definitions are simply gone]
As per the GICv3 specification, GIC{D,R}_SEIR are not assigned and the
locations (0x0068) are actually Reserved. GICR_MOV{LPI,ALL}R are two IMP
DEF registers and might be defined by some specific micro-architecture.
As they're not used anywhere in the kernel, just drop all of them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: added context explaination]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200630134126.880-1-yuzenghui@huawei.com
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GPIO_REGMAP_ADDR_ZERO() cast to unsigned long but the actual config
parameters are unsigned int. We use unsigned int here because that is
the type which is used by the underlying regmap.
Fixes: ebe363197e52 ("gpio: add a reusable generic gpio_chip using regmap")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200725232337.27581-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Drop the doubled word "for".
Change "It it" to "If it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Refresh the branch for a dependent commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The original version of that used secure_computing() which has no
arguments. Review requested to switch to __secure_computing() which has
one. The function name was correct, but no argument added and of course
compiling without SECCOMP was deemed overrated.
Add the missing function argument.
Fixes: 6823ecabf030 ("seccomp: Provide stub for __secure_computing()")
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Now that BPF program/link management is centralized in generic net_device
code, kernel code never queries program id from drivers, so
XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary.
This patch removes all the implementations of those commands in kernel, along
the xdp_attachment_query().
This patch was compile-tested on allyesconfig.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
|
|
Add bpf_link-based API (bpf_xdp_link) to attach BPF XDP program through
BPF_LINK_CREATE command.
bpf_xdp_link is mutually exclusive with direct BPF program attachment,
previous BPF program should be detached prior to attempting to create a new
bpf_xdp_link attachment (for a given XDP mode). Once BPF link is attached, it
can't be replaced by other BPF program attachment or link attachment. It will
be detached only when the last BPF link FD is closed.
bpf_xdp_link will be auto-detached when net_device is shutdown, similarly to
how other BPF links behave (cgroup, flow_dissector). At that point bpf_link
will become defunct, but won't be destroyed until last FD is closed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-5-andriin@fb.com
|
|
Instead of delegating to drivers, maintain information about which BPF
programs are attached in which XDP modes (generic/skb, driver, or hardware)
locally in net_device. This effectively obsoletes XDP_QUERY_PROG command.
Such re-organization simplifies existing code already. But it also allows to
further add bpf_link-based XDP attachments without drivers having to know
about any of this at all, which seems like a good setup.
XDP_SETUP_PROG/XDP_SETUP_PROG_HW are just low-level commands to driver to
install/uninstall active BPF program. All the higher-level concerns about
prog/link interaction will be contained within generic driver-agnostic logic.
All the XDP_QUERY_PROG calls to driver in dev_xdp_uninstall() were removed.
It's not clear for me why dev_xdp_uninstall() were passing previous prog_flags
when resetting installed programs. That seems unnecessary, plus most drivers
don't populate prog_flags anyways. Having XDP_SETUP_PROG vs XDP_SETUP_PROG_HW
should be enough of an indicator of what is required of driver to correctly
reset active BPF program. dev_xdp_uninstall() is also generalized as an
iteration over all three supported mode.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-3-andriin@fb.com
|
|
Similarly to bpf_prog, make bpf_link and related generic API available
unconditionally to make it easier to have bpf_link support in various parts of
the kernel. Stub out init/prime/settle/cleanup and inc/put APIs.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-2-andriin@fb.com
|
|
This change comes in several parts:
One, the restriction that the CGROUP_STORAGE map can only be used
by one program is removed. This results in the removal of the field
'aux' in struct bpf_cgroup_storage_map, and removal of relevant
code associated with the field, and removal of now-noop functions
bpf_free_cgroup_storage and bpf_cgroup_storage_release.
Second, we permit a key of type u64 as the key to the map.
Providing such a key type indicates that the map should ignore
attach type when comparing map keys. However, for simplicity newly
linked storage will still have the attach type at link time in
its key struct. cgroup_storage_check_btf is adapted to accept
u64 as the type of the key.
Third, because the storages are now shared, the storages cannot
be unconditionally freed on program detach. There could be two
ways to solve this issue:
* A. Reference count the usage of the storages, and free when the
last program is detached.
* B. Free only when the storage is impossible to be referred to
again, i.e. when either the cgroup_bpf it is attached to, or
the map itself, is freed.
Option A has the side effect that, when the user detach and
reattach a program, whether the program gets a fresh storage
depends on whether there is another program attached using that
storage. This could trigger races if the user is multi-threaded,
and since nondeterminism in data races is evil, go with option B.
The both the map and the cgroup_bpf now tracks their associated
storages, and the storage unlink and free are removed from
cgroup_bpf_detach and added to cgroup_bpf_release and
cgroup_storage_map_free. The latter also new holds the cgroup_mutex
to prevent any races with the former.
Fourth, on attach, we reuse the old storage if the key already
exists in the map, via cgroup_storage_lookup. If the storage
does not exist yet, we create a new one, and publish it at the
last step in the attach process. This does not create a race
condition because for the whole attach the cgroup_mutex is held.
We keep track of an array of new storages that was allocated
and if the process fails only the new storages would get freed.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
|
|
bpf_get_[stack|stackid] on perf_events with precise_ip uses callchain
attached to perf_sample_data. If this callchain is not presented, do not
allow attaching BPF program that calls bpf_get_[stack|stackid] to this
event.
In the error case, -EPROTO is returned so that libbpf can identify this
error and print proper hint message.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723180648.1429892-3-songliubraving@fb.com
|
|
Calling get_perf_callchain() on perf_events from PEBS entries may cause
unwinder errors. To fix this issue, the callchain is fetched early. Such
perf_events are marked with __PERF_SAMPLE_CALLCHAIN_EARLY.
Similarly, calling bpf_get_[stack|stackid] on perf_events from PEBS may
also cause unwinder errors. To fix this, add separate version of these
two helpers, bpf_get_[stack|stackid]_pe. These two hepers use callchain in
bpf_perf_event_data_kern->data->callchain.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723180648.1429892-2-songliubraving@fb.com
|
|
The bpf iterator for map elements are implemented.
The bpf program will receive four parameters:
bpf_iter_meta *meta: the meta data
bpf_map *map: the bpf_map whose elements are traversed
void *key: the key of one element
void *value: the value of the same element
Here, meta and map pointers are always valid, and
key has register type PTR_TO_RDONLY_BUF_OR_NULL and
value has register type PTR_TO_RDWR_BUF_OR_NULL.
The kernel will track the access range of key and value
during verification time. Later, these values will be compared
against the values in the actual map to ensure all accesses
are within range.
A new field iter_seq_info is added to bpf_map_ops which
is used to add map type specific information, i.e., seq_ops,
init/fini seq_file func and seq_file private data size.
Subsequent patches will have actual implementation
for bpf_map_ops->iter_seq_info.
In user space, BPF_ITER_LINK_MAP_FD needs to be
specified in prog attr->link_create.flags, which indicates
that attr->link_create.target_fd is a map_fd.
The reason for such an explicit flag is for possible
future cases where one bpf iterator may allow more than
one possible customization, e.g., pid and cgroup id for
task_file.
Current kernel internal implementation only allows
the target to register at most one required bpf_iter_link_info.
To support the above case, optional bpf_iter_link_info's
are needed, the target can be extended to register such link
infos, and user provided link_info needs to match one of
target supported ones.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
|
|
Readonly and readwrite buffer register states
are introduced. Totally four states,
PTR_TO_RDONLY_BUF[_OR_NULL] and PTR_TO_RDWR_BUF[_OR_NULL]
are supported. As suggested by their respective
names, PTR_TO_RDONLY_BUF[_OR_NULL] are for
readonly buffers and PTR_TO_RDWR_BUF[_OR_NULL]
for read/write buffers.
These new register states will be used
by later bpf map element iterator.
New register states share some similarity to
PTR_TO_TP_BUFFER as it will calculate accessed buffer
size during verification time. The accessed buffer
size will be later compared to other metrics during
later attach/link_create time.
Similar to reg_state PTR_TO_BTF_ID_OR_NULL in bpf
iterator programs, PTR_TO_RDONLY_BUF_OR_NULL or
PTR_TO_RDWR_BUF_OR_NULL reg_types can be set at
prog->aux->bpf_ctx_arg_aux, and bpf verifier will
retrieve the values during btf_ctx_access().
Later bpf map element iterator implementation
will show how such information will be assigned
during target registeration time.
The verifier is also enhanced such that PTR_TO_RDONLY_BUF
can be passed to ARG_PTR_TO_MEM[_OR_NULL] helper argument, and
PTR_TO_RDWR_BUF can be passed to ARG_PTR_TO_MEM[_OR_NULL] or
ARG_PTR_TO_UNINIT_MEM.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184111.590274-1-yhs@fb.com
|
|
This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com
|
|
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.
This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
|
|
It's mostly a copy paste of commit 6086d29def80 ("bpf: Add bpf_map iterator")
that is use to implement bpf_seq_file opreations to traverse all bpf programs.
v1->v2: Tweak to use build time btf_id
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
A common pattern for using plain DEVICE_ATTR() instead of
DEVICE_ATTR_RO() and DEVICE_ATTR_RW() is for attributes that want to
limit read to only root. I.e. many users of DEVICE_ATTR() are
specifying 0400 or 0600 for permissions.
Given the expectation that CAP_SYS_ADMIN is needed to access these
sensitive attributes add an explicit helper with the _ADMIN_ identifier
for DEVICE_ATTR_ADMIN_{RO,RW}.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
DSMs are strictly an ACPI mechanism, evict the bus_dsm_mask concept from
the generic 'struct nvdimm_bus_descriptor' object.
As a side effect the test facility ->bus_nfit_cmd_force_en is no longer
necessary. The test infrastructure can communicate that information
directly in ->bus_dsm_mask.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
The ND_CMD_CALL format allows for a general passthrough of passlisted
commands targeting a given command set. However there is no validation
of the family index relative to what the bus supports.
- Update the NFIT bus implementation (the only one that supports
ND_CMD_CALL passthrough) to also passlist the valid set of command
family indices.
- Update the generic __nd_ioctl() path to validate that field on behalf
of all implementations.
Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
