summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2021-12-03mtd: remove unused header file <linux/mtd/latch-addr-flash.h>Jonathan Corbet
Commit d24dbd7541ff ("mtd: maps: Get rid of the latch-addr-flash driver") removed the last user of <linux/mtd/latch-addr-flash.h> but left the header file behind. Nothing uses this file, delete it now. Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211102220203.940290-7-corbet@lwn.net
2021-12-02net/mlx5: Dynamically resize flow counters query bufferAvihai Horon
The flow counters bulk query buffer is allocated once during mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little more than 512KB of memory, which is aligned to the next power of 2, to 1MB. For SFs, this buffer is reduced and takes around 128 Bytes. The buffer size determines the maximum number of flow counters that can be queried at a time. Thus, having a bigger buffer can improve performance for users that need to query many flow counters. There are cases that don't use many flow counters and don't need a big buffer (e.g. SFs, VFs). Since this size is critical with large scale, in these cases the buffer size should be reduced. In order to reduce memory consumption while maintaining query performance, change the query buffer's allocation scheme to the following: - First allocate the buffer with small initial size. - If the number of counters surpasses the initial size, resize the buffer to the maximum size. The buffer only grows and isn't shrank, because users with many flow counters don't care about the buffer size and we don't want to add resize overhead if the current number of counters drops. This solution is preferable to the current one, which is less accurate and only addresses SFs. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALLKumar Kartikeya Dwivedi
Vinicius Costa Gomes reported [0] that build fails when CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled. This leads to btf.c not being compiled, and then no symbol being present in vmlinux for the declarations in btf.h. Since BTF is not useful without enabling BPF subsystem, disallow this combination. However, theoretically disabling both now could still fail, as the symbol for kfunc_btf_id_list variables is not available. This isn't a problem as the compiler usually optimizes the whole register/unregister call, but at lower optimization levels it can fail the build in linking stage. Fix that by adding dummy variables so that modules taking address of them still work, but the whole thing is a noop. [0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration") Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02Merge tag 'net-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
2021-12-02bpf: Pass a set of bpf_core_relo-s to prog_load command.Alexei Starovoitov
struct bpf_core_relo is generated by llvm and processed by libbpf. It's a de-facto uapi. With CO-RE in the kernel the struct bpf_core_relo becomes uapi de-jure. Add an ability to pass a set of 'struct bpf_core_relo' to prog_load command and let the kernel perform CO-RE relocations. Note the struct bpf_line_info and struct bpf_func_info have the same layout when passed from LLVM to libbpf and from libbpf to the kernel except "insn_off" fields means "byte offset" when LLVM generates it. Then libbpf converts it to "insn index" to pass to the kernel. The struct bpf_core_relo's "insn_off" field is always "byte offset". Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-6-alexei.starovoitov@gmail.com
2021-12-02bpf: Prepare relo_core.c for kernel duty.Alexei Starovoitov
Make relo_core.c to be compiled for the kernel and for user space libbpf. Note the patch is reducing BPF_CORE_SPEC_MAX_LEN from 64 to 32. This is the maximum number of nested structs and arrays. For example: struct sample { int a; struct { int b[10]; }; }; struct sample *s = ...; int *y = &s->b[5]; This field access is encoded as "0:1:0:5" and spec len is 4. The follow up patch might bump it back to 64. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-4-alexei.starovoitov@gmail.com
2021-12-02bpf: Rename btf_member accessors.Alexei Starovoitov
Rename btf_member_bit_offset() and btf_member_bitfield_size() to avoid conflicts with similarly named helpers in libbpf's btf.h. Rename the kernel helpers, since libbpf helpers are part of uapi. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201181040.23337-3-alexei.starovoitov@gmail.com
2021-12-02HID: do not inline some hid_hw_ functionsBenjamin Tissoires
We don't gain much by having them as inline, and it actually prevents us to attach a probe to those helpers. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211202095334.14399-5-benjamin.tissoires@redhat.com
2021-12-02HID: add suspend/resume helpersBenjamin Tissoires
There is a lot of duplication of code in the HID low level drivers. Better have everything in one place so we can eventually extend it in a generic way. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211202095334.14399-4-benjamin.tissoires@redhat.com
2021-12-02HID: add hid_is_usb() function to make it simpler for USB detectionGreg Kroah-Hartman
A number of HID drivers already call hid_is_using_ll_driver() but only for the detection of if this is a USB device or not. Make this more obvious by creating hid_is_usb() and calling the function that way. Also converts the existing hid_is_using_ll_driver() functions to use the new call. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Cc: stable@vger.kernel.org Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org
2021-12-02sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_fullFrederic Weisbecker
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime than the actual time. task_cputime_adjusted() snapshots utime and stime and then adjust their sum to match the scheduler maintained cputime.sum_exec_runtime. Unfortunately in nohz_full, sum_exec_runtime is only updated once per second in the worst case, causing a discrepancy against utime and stime that can be updated anytime by the reader using vtime. To fix this situation, perform an update of cputime.sum_exec_runtime when the cputime snapshot reports the task as actually running while the tick is disabled. The related overhead is then contained within the relevant situations. Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org
2021-12-02mm, slab: Remove compiler check in __kmalloc_indexNathan Chancellor
The minimum supported version of LLVM has been raised to 11.0.0, meaning this check is always true, so it can be dropped. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-12-01net: annotate data-races on txq->xmit_lock_ownerEric Dumazet
syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01kprobes: Limit max data_size of the kretprobe instancesMasami Hiramatsu
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if user sets it enough big number (e.g. (size_t)-8), the result of 'data_size + sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct kretprobe_instance) or zero. In result, the kretprobe_instance are allocated without enough memory, and kretprobe accesses outside of allocated memory. To avoid this issue, introduce a max limitation of the kretprobe::data_size. 4KB per instance should be OK. Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler") Reported-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-12-01cgroup: fix a typo in commentWei Yang
In commit 8699b7762a62 ("cgroup: s/child_subsys_mask/subtree_ss_mask/"), we rename child_subsys_mask to subtree_ss_mask. While it missed to rename this in comment. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-11-30net/mlx5: Fix access to a non-supported registerAya Levin
Validate MRTC register is supported before triggering a delayed work which accesses it. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-11-30rcu: in_irq() cleanupChangbin Du
This commit replaces the obsolete and ambiguous macro in_irq() with its shiny new in_hardirq() equivalent. Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-11-30rcu: Replace ________p1 and _________p1 with __UNIQUE_ID(rcu)Chun-Hung Tseng
This commit replaces both ________p1 and _________p1 with __UNIQUE_ID(rcu), and also adjusts the callers of the affected macros. __UNIQUE_ID(rcu) will generate unique variable names during compilation, which eliminates the need of ________p1 and _________p1 (both having 4 occurrences prior to the code change). This also avoids the variable name shadowing issue, or at least makes those wishing to cause shadowing problems work much harder to do so. The same idea is used for the min/max macros (commit 589a978 and commit e9092d0). Signed-off-by: Jim Huang <jserv@ccns.ncku.edu.tw> Signed-off-by: Chun-Hung Tseng <henrybear327@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-12-01genirq/generic_chip: Constify irq_generic_chip_opsRikard Falkeborn
The only usage of irq_generic_chip_ops is to pass its address to irq_domain_add_linear() which takes a pointer to const struct irq_domain_ops. Make it const to allow the compiler to put it in read-only memory. [ tglx: Fixed subject prefix ] Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20211130214043.1257585-1-rikard.falkeborn@gmail.com
2021-12-01entry: Snapshot thread flagsMark Rutland
Some thread flags can be set remotely, and so even when IRQs are disabled, the flags can change under our feet. Generally this is unlikely to cause a problem in practice, but it is somewhat unsound, and KCSAN will legitimately warn that there is a data race. To avoid such issues, a snapshot of the flags has to be taken prior to using them. Some places already use READ_ONCE() for that, others do not. Convert them all to the new flag accessor helpers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20211129130653.2037928-3-mark.rutland@arm.com
2021-12-01thread_info: Add helpers to snapshot thread flagsMark Rutland
In <linux/thread_info.h> there are helpers to manipulate individual thread flags, but where code wants to check several flags at once, it must open code reading current_thread_info()->flags and operating on a snapshot. As some flags can be set remotely it's necessary to use READ_ONCE() to get a consistent snapshot even when IRQs are disabled, but some code forgets to do this. Generally this is unlike to cause a problem in practice, but it is somewhat unsound, and KCSAN will legitimately warn that there is a data race. To make it easier to do the right thing, and to highlight that concurrent modification is possible, add new helpers to snapshot the flags, which should be used in preference to plain reads. Subsequent patches will move existing code to use the new helpers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marco Elver <elver@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211129130653.2037928-2-mark.rutland@arm.com
2021-11-30bpf: Add bpf_loop helperJoanne Koong
This patch adds the kernel-side and API changes for a new helper function, bpf_loop: long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags); where long (*callback_fn)(u32 index, void *ctx); bpf_loop invokes the "callback_fn" **nr_loops** times or until the callback_fn returns 1. The callback_fn can only return 0 or 1, and this is enforced by the verifier. The callback_fn index is zero-indexed. A few things to please note: ~ The "u64 flags" parameter is currently unused but is included in case a future use case for it arises. ~ In the kernel-side implementation of bpf_loop (kernel/bpf/bpf_iter.c), bpf_callback_t is used as the callback function cast. ~ A program can have nested bpf_loop calls but the program must still adhere to the verifier constraint of its stack depth (the stack depth cannot exceed MAX_BPF_STACK)) ~ Recursive callback_fns do not pass the verifier, due to the call stack for these being too deep. ~ The next patch will include the tests and benchmark Signed-off-by: Joanne Koong <joannekoong@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211130030622.4131246-2-joannekoong@fb.com
2021-11-30bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.Sebastian Andrzej Siewior
The initial implementation of migrate_disable() for mainline was a wrapper around preempt_disable(). RT kernels substituted this with a real migrate disable implementation. Later on mainline gained true migrate disable support, but neither documentation nor affected code were updated. Remove stale comments claiming that migrate_disable() is PREEMPT_RT only. Don't use __this_cpu_inc() in the !PREEMPT_RT path because preemption is not disabled and the RMW operation can be preempted. Fixes: 74d862b682f51 ("sched: Make migrate_disable/enable() independent of RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211127163200.10466-3-bigeasy@linutronix.de
2021-11-30net: stmmac: Add platform level debug register dump featureBhupesh Sharma
dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers after the 'stmmac_dvr_probe()' returns. However with commit 5ec55823438e ("net: stmmac: add clocks management for gmac driver"), we now let 'pm_runtime_put()' disable the clocks before returning from 'stmmac_dvr_probe()'. This causes a crash when 'rgmii_dump()' register dumps are enabled, as the clocks are already off. Since other dwmac drivers (possible future users as well) might require a similar register dump feature, introduce a platform level callback to allow the same. This fixes the crash noticed while enabling rgmii_dump() dumps in dwmac-qcom-ethqos driver as well. It also allows future changes to keep a invoking the register dump callback from the correct place inside 'stmmac_dvr_probe()'. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29siphash: use _unaligned version by defaultArnd Bergmann
On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS because the ordinary load/store instructions (ldr, ldrh, ldrb) can tolerate any misalignment of the memory address. However, load/store double and load/store multiple instructions (ldrd, ldm) may still only be used on memory addresses that are 32-bit aligned, and so we have to use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we may end up with a severe performance hit due to alignment traps that require fixups by the kernel. Testing shows that this currently happens with clang-13 but not gcc-11. In theory, any compiler version can produce this bug or other problems, as we are dealing with undefined behavior in C99 even on architectures that support this in hardware, see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363. Fortunately, the get_unaligned() accessors do the right thing: when building for ARMv6 or later, the compiler will emit unaligned accesses using the ordinary load/store instructions (but avoid the ones that require 32-bit alignment). When building for older ARM, those accessors will emit the appropriate sequence of ldrb/mov/orr instructions. And on architectures that can truly tolerate any kind of misalignment, the get_unaligned() accessors resolve to the leXX_to_cpup accessors that operate on aligned addresses. Since the compiler will in fact emit ldrd or ldm instructions when building this code for ARM v6 or later, the solution is to use the unaligned accessors unconditionally on architectures where this is known to be fast. The _aligned version of the hash function is however still needed to get the best performance on architectures that cannot do any unaligned access in hardware. This new version avoids the undefined behavior and should produce the fastest hash on all architectures we support. Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/ Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/ Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29block: remove the gendisk argument to blk_execute_rqChristoph Hellwig
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait given that it is unused now. Also convert the boolean at_head parameter to actually use the bool type while touching the prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove the ->rq_disk field in struct requestChristoph Hellwig
Just use the disk attached to the request_queue instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove get_io_context_activeChristoph Hellwig
Fold it into it's only caller, and remove a lof of the debug checks that are not needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211126115817.2087431-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: mark put_io_context_active staticChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211126115817.2087431-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29fork: move copy_io to block/blk-ioc.cChristoph Hellwig
Move the copying of the I/O context to the block layer as that is where we can use the proper low-level interfaces. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211126115817.2087431-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29blk-mq: Add blk_mq_complete_request_direct()Sebastian Andrzej Siewior
Add blk_mq_complete_request_direct() which completes the block request directly instead deferring it to softirq for single queue devices. This is useful for devices which complete the requests in preemptible context and raising softirq from means scheduling ksoftirqd. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211025070658.1565848-2-bigeasy@linutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29blk-crypto: remove blk_crypto_unregister()Eric Biggers
This function is trivial and is only used in one place. Having this function is misleading because it implies that blk_crypto_register() needs to be paired with blk_crypto_unregister(), which is not the case. Just set disk->queue->crypto_profile to NULL directly. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211124013733.347612-1-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: only allocate poll_stats if there's a user of themJens Axboe
This is essentially never used, yet it's about 1/3rd of the total queue size. Allocate it when needed, and don't embed it in the queue. Kill the queue flag for this while at it, since we can just check the assigned pointer now. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: cleanup the GENHD_FL_* definitionsChristoph Hellwig
Switch to an enum and tidy up the documentation. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove GENHD_FL_EXT_DEVTChristoph Hellwig
All modern drivers can support extra partitions using the extended dev_t. In fact except for the ioctl method drivers never even see partitions in normal operation. So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all block devices that do support partitions, and require those that do not support partitions to explicit disallow them using GENHD_FL_NO_PART. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove GENHD_FL_SUPPRESS_PARTITION_INFOChristoph Hellwig
This flag is not set directly anywhere and only inherited from GENHD_FL_HIDDEN. Just check for GENHD_FL_HIDDEN instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: rename GENHD_FL_NO_PART_SCAN to GENHD_FL_NO_PARTChristoph Hellwig
The GENHD_FL_NO_PART_SCAN controls more than just partitions canning, so rename it to GENHD_FL_NO_PART. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20211122130625.1136848-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove GENHD_FL_CDChristoph Hellwig
GENHD_FL_CD marks a gendisk as a vaguely CD-ROM like device. Besides being used internally inside of sunvdc.c an xen-blkfront it is used by xen-blkback as a hint to claim a device exported to a guest is a CD-ROM like device. Just check for disk->cdi instead which is the right indicator for "real" CD-ROM or DVD drivers. This will miss the paravirtualized guest drivers, but those make little sense to report anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: move GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE to disk->event_flagsChristoph Hellwig
GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE is all about the event reporting mechanism, so move it to the event_flags field. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: move GENHD_FL_NATIVE_CAPACITY to disk->stateChristoph Hellwig
The flag to indicate an unlocked native capacity is dynamic state, not a driver capability flag, so move it to disk->state. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211122130625.1136848-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove rq_flush_dcache_pagesChristoph Hellwig
This function is trivial, and flush_dcache_page is always defined, so just open code it in the 2.5 callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20211117061404.331732-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: move blk_rq_err_bytes to scsiChristoph Hellwig
blk_rq_err_bytes is only used by the scsi midlayer, so move it there. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20211117061404.331732-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macroDario Binacchi
In TI's reference manual description for the `AFE_Pen_Ctrl' bit-field of the TSC's CTRL register, there is no mention of 8-wire touchscreens. Even commit f0933a60d190 ("mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS") says that the value of this bit-field must be the same for 4-wire and 8-wire touchscreens. So let's remove the CNTRLREG_TSC_8WIRE macro to avoid misunderstandings. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211125224642.21011-5-dariobin@libero.it
2021-11-29net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO ↵Colin Foster
access Switch to a shared MDIO access implementation by way of the mdio-mscc-miim driver. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29spi: pxa2xx: Get rid of unused enable_loopback memberAndy Shevchenko
There is no user of the enable_loopback member in the struct pxa2xx_spi_chip. Remote this legacy member completely. The mentioned in the documentation the testing phase can be performed with spidev_test tool. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211123192723.44537-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29spi: pxa2xx: Get rid of unused ->cs_control()Andy Shevchenko
Since the last user of the custom ->cs_control() gone, we may get rid of this legacy API completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211123192723.44537-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-29mfd: bd70528: Drop BD70528 supportMatti Vaittinen
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/cf7dfd98b3403ad363b2b48b57bdbfd57a6416cb.1637066805.git.matti.vaittinen@fi.rohmeurope.com
2021-11-29Merge 5.16-rc3 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-28fpga: region: Use standard dev_release for class driverRuss Weight
The FPGA region class driver data structure is being treated as a managed resource instead of using the standard dev_release call-back function to release the class data structure. This change removes the managed resource code and combines the create() and register() functions into a single register() or register_full() function. The register_full() function accepts an info data structure to provide flexibility in passing optional parameters. The register() function supports the current parameter list for users that don't require the use of optional parameters. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 07:00:54 +0000