| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Not much going on in the core for SPI this time but a reasonable
amount of change in the drivers:
- Removal of dmal_request_slave_channel() from Peter Ujfalusi.
- More conversions of drivers to GPIO descriptors from Linus Walleij.
- A big rework of the sh-msiof driver from Geert Uytterhoeven moving
it over to the generic native chipselect support.
- DMA support for the uniphier driver from Kunihiko Hayashi.
- New driver support for HiSilcon v3xx SPI NOR controllers from John
Garry"
* tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
dt-binding: spi: add NPCM PSPI reset binding
spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
spi: npcm-pspi: modify reset support
spi: npcm-pspi: improve spi transfer performance
spi: spi-ti-qspi: fix warning
spi: npcm-pspi: fix 16 bit send and receive support
spi: pxa2xx: Add support for Intel Comet Lake PCH-V
spi: fsl: simplify error path in of_fsl_spi_probe()
spi: fsl-lpspi: fix only one cs-gpio working
spi: spi-ti-qspi: optimize byte-transfers
spi: spi-ti-qspi: support large flash devices
spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data
MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
spi: Add HiSilicon v3xx SPI NOR flash controller driver
dt-bindings: spi_atmel: add microchip,sam9x60-spi
spi: bcm2835: Raise maximum number of slaves to 4
spi: sh-msiof: Do not redefine STR while compile testing
spi: rspi: Add support for GPIO chip selects
spi: rspi: Add support for multiple native chip selects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is quite a busy release for a subsystem that's usually very
quiet, though still a small set of updates in the grand scheme of
things:
- A fix for writes to non-incrementing registers.
- An iopoll() style helper for use with atomic safe regmaps, making
it easier to transition from raw memory mapped I/O.
- Some constification"
* tag 'regmap-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix writes to non incrementing registers
regmap: add iopoll-like atomic polling macro
regmap-i2c: constify regmap_bus structures
|
|
Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the
correct set of memslots is used when handling x86 page faults in SMM.
Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper, is_transparent_hugepage(), to explicitly check whether a
compound page is a THP and use it when populating KVM's secondary MMU.
The explicit check fixes a bug where a remapped compound page, e.g. for
an XDP Rx socket, is mapped into a KVM guest and is mistaken for a THP,
which results in KVM incorrectly creating a huge page in its secondary
MMU.
Fixes: 936a5fe6e6148 ("thp: kvm mmu transparent hugepage support")
Reported-by: syzbot+c9d1fb51ac9d0d10c39d@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After commit 61bd0f66ff92 ("KVM: PPC: Book3S HV: Fix guest time accounting
with VIRT_CPU_ACCOUNTING_GEN"), no one use this function anymore, So better
to remove it.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For ring-based dirty log tracking, it will be more efficient to account
writes during schedule-out or schedule-in to the currently running VCPU.
We would like to do it even if the write doesn't use the current VCPU's
address space, as is the case for cached writes (see commit 4e335d9e7ddb,
"Revert "KVM: Support vCPU-based gfn->hva cache"", 2017-05-02).
Therefore, add a mechanism to track the currently-loaded kvm_vcpu struct.
There is already something similar in KVM/ARM; one important difference
is that kvm_arch_vcpu_{load,put} have two callers in virt/kvm/kvm_main.c:
we have to update both the architecture-independent vcpu_{load,put} and
the preempt notifiers.
Another change made in the process is to allow using kvm_get_running_vcpu()
in preemptible code. This is allowed because preempt notifiers ensure
that the value does not change even after the VCPU thread is migrated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_read_guest_atomic() because it's not used anywhere.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static
now that they are referenced only in kvm_main.c.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Enable thermal policy for ASUS TUF FX705DY/FX505DY
- Support left round button on ASUS N56VB
- Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
- Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
driver
- Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers
- Touchscreen support for the PiPO W11 tablet
* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
platform/x86: intel_scu_ipc: Drop unused macros
platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
platform/x86: intel_scu_ipc: Sleeping is fine when polling
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
platform/x86: intel_scu_ipc: Remove Lincroft support
platform/x86: intel_scu_ipc: Add constants for register offsets
platform/x86: intel_scu_ipc: Fix interrupt support
platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
...
|
|
Pull MMC updates from Ulf Hansson:
"There are no updates for the MEMSTICK subsystem this time. But note
that I am also carrying a patch from the pinctrl tree, which has been
shared through an immutable branch.
Summary:
MMC core:
- Convert to reasonable timeouts for all CMD6 commands (updates for
BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
- Respect f_max clock rate at card initialization
- Add gpiod_toggle_active_low() API
- Consolidate slot-gpio code by using gpiod_toggle_active_low()
MMC host:
- Add pinctrl_select_default_state() API
- Consolidate pintctrl code by using pinctrl_select_default_state()
- mmci: Support any block sizes for SDIO for some variants
- mmci: Enable reset control for stm32_sdmmc
- mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
- renesas_sdhi: Add support for the r8a77961 variant
- renesas_sdhi: A few minor improvements
- rockchip-dw-mshc: Add support for the rk3308 variant
- sdhci: Enable support for external DMA controllers
- sdhci: Fixup error path when sending CMD12
- sdhci-brcmstb: Add support for 7216b0 variant
- sdhci-brcmstb: Add support for command queuing (CQHCI)
- sdhci-brcmstb: Add support for eMMC HS400ES mode
- sdhci-msm: Add support for the sc7180 variant
- sdhci-msm: Add support for command queuing (CQHCI)
- sdhci-of-at91: Add support for the SAM9x60 variant
- sdhci-of-at91: Improve support for tunings
- sdhci-of-esdhc: A few fixups for some clock related issues
- sdhci-omap: Add support for the am335x and the am437x variants
- sdhci-omap: Improve support for erase operations
- sdhci-omap: Add support for external DMA"
* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
mmc: sdhci-cadence: remove unneeded 'inline' marker
dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
mmc: sdhci-msm: Add CQHCI support for sdhci-msm
mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
mmc: sdhci-of-esdhc: fix transfer mode register reading
mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
mmc: sdhci-brcmstb: Add shutdown callback
mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
mmc: core: limit probe clock frequency to configured f_max
mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
mmc: sdhci: fix an issue of mixing different types
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Misc fixes to the MCE code all over the place, by Jan H. Schönherr.
- Initial support for AMD F19h and other cleanups to amd64_edac, by
Yazen Ghannam.
- Other small cleanups.
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Make fam_ops static global
EDAC/amd64: Drop some family checks for newer systems
EDAC/amd64: Add family ops for Family 19h Models 00h-0Fh
x86/amd_nb: Add Family 19h PCI IDs
EDAC/mce_amd: Always load on SMCA systems
x86/MCE/AMD, EDAC/mce_amd: Add new Load Store unit McaType
x86/mce: Fix use of uninitialized MCE message string
x86/mce: Fix mce=nobootlog
x86/mce: Take action on UCNA/Deferred errors again
x86/mce: Remove mce_inject_log() in favor of mce_log()
x86/mce: Pass MCE message to mce_panic() on failed kernel recovery
x86/mce/therm_throt: Mark throttle_active_work() as __maybe_unused
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"core:
- Add support for enable attributes to hwmon core
- Add intrusion templates
pmbus:
- Support for Infineon Multi-phase xdpe122 family controllers
- Support for Intel IMVP9 and AMD 6.25mV modes
- Support for vid mode detection per page bases
- Detect if chip is write protected
- Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
TPS53688
- Various improvements to ibm-cffps driver
k10temp:
- Support for additional temperature sensors as well as voltage and
current telemetry for Zen CPUs
w83627ehf:
- Remove support for NCT6775, NCT6776 (they have their own driver)
New drivers:
- ADM1177
- MAX31730
- Driver for disk and solid state drives with temperature sensors
Other:
- pwm-fan: stop fan on shutdown"
* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
hwmon: (k10temp) Display up to eight sets of CCD temperatures
hwmon: (k10temp) Add debugfs support
hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
hwmon: (k10temp) Report temperatures per CPU die
hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
hwmon: (k10temp) Use bitops
hwmon: (pwm-fan) stop fan on shutdown
MAINTAINERS: add entry for ADM1177 driver
dt-binding: hwmon: Add documentation for ADM1177
hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
docs: hwmon: Include 'xdpe12284.rst' into docs
hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
hwmon: (pmbus/tps53679) Extend device list supported by driver
hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
hwmon: (pmbus/core) Add support for vid mode detection per page bases
hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
hwmon: Driver for disk and solid state drives with temperature sensors
hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
...
|
|
Raw NAND
* Macronix: Use match_string() helper
* Atmel: switch to using devm_fwnode_gpiod_get()
* Denali: rework the SKIP_BYTES feature and add reset controlling
* Brcmnand: set appropriate DMA mask
* Various cleanup.
Onenand drivers
* Rename Samsung and Omap2 drivers to avoid possible build warnings
* Enable compile testing
* Various build issues
* Kconfig cleanup
SPI-NAND
* Support for Toshiba TC58CVG2S0HRAIJ
|
|
Instead of using the copy-from operation, switch copy_file_range to the
new copy-from2 operation, which allows to send the truncate_seq and
truncate_size parameters.
If an OSD does not support the copy-from2 operation it will return
-EOPNOTSUPP. In that case, the kernel client will stop trying to do
remote object copies for this fs client and will always use the generic
VFS copy_file_range.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.
Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.
Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In case the max_mds > 1 in MDS cluster and there is no any standby
MDS and all the max_mds MDSs are in up:active state, if one of the
up:active MDSs is dead, the m->m_num_laggy in kclient will be 1.
Then the mount will fail without considering other healthy MDSs.
There manybe some MDSs still "in" the cluster but not in up:active
state, we will ignore them. Only when all the up:active MDSs in
the cluster are laggy will treat the cluster as not be available.
In case decreasing the max_mds, the cluster will not stop the extra
up:active MDSs immediately and there will be a latency. During it
the up:active MDS number will be larger than the max_mds, so later
the m_info memories will 100% be reallocated.
Here will pick out the up:active MDSs as the m_num_mds and allocate
the needed memories once.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add to debug dump more information on the platform it was collected
from (pci func, path id).
Provide human readable reg fifo erros.
Removed static debug arrays from HSI Functions, and move them to
the hwfn.
Some structures were slightly changed (removing reserved chip id
for example) which lead to many long initializations being modified
with one parameter less during initialization. This leads to
some long diffs that don't really change anything.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Part of the FW drop includes new debug capabilities implemented in the
qed_debug file. This patch dumps additional information during ethtool -d
for better debugging. The data dumped is the ilt (internal logical table)
and information gathered by the management firmware incase there was a
crash and driver was not able to extract the information (mdump).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch contains several HSI changes. The changes are part of
features like RDMA VF and OVS, the patch also contains a fix to
how the init code determines if the dmae is ready to be used.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Remove struct iscsi_slow_path_hdr and field fw_cid from several structs
- Remove struct iscsi_spe_func_dstry
- Remove fields pbe_page_size_log and pbl_page_size_log from struct
iscsi_conn_offload_param
Signed-off-by: Manish Rangankar <manish.rangankar@marvell.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@marvell.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of BTB blocks was modified to be different between the two chip
flavors supported (BB/K2) as a result, this lead to a re-write of selecting
the default hsi value based on the chip.
This patch creates a lookup table for hsi values per chip rather than
ask again and again for every value.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LL2 queues were a limited resource due to FW constraints.
This FW introduced a new resource which is a context based ll2 queue
(memory on host). The additional ll2 queues are required for RDMA SRIOV.
The code refers to the previous ll2 queues as ram-based or legacy, and the
new queues as ctx-based.
This change decreased the "legacy" ram-based queues therefore the first ll2
queue used for iWARP was converted to the ctx-based ll2 queue.
This feature also exposed a bug in the DIRECT_REG_WR64 macro implementation
which didn't have an effect in other use cases.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IRO stands for internal RAM offsets. Updating the FW binary produces
different iro offsets. This file contains the different values,
and a new representation of the values.
Update the FW version
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-01-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 20 non-merge commits during the last 5 day(s) which contain
a total of 24 files changed, 433 insertions(+), 104 deletions(-).
The main changes are:
1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa.
2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko.
3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer.
4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend.
5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi.
6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin.
7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov.
8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover.
9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* pm-devfreq: (24 commits)
PM / devfreq: Add debugfs support with devfreq_summary file
PM / devfreq: exynos: Rename Exynos to lowercase
PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event
PM / devfreq: exynos-bus: Disable devfreq-event device when fails
PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails
PM / devfreq: imx8m-ddrc: Remove unused defines
PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers
PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource
PM / devfreq: rk3399_dmc: Add missing of_node_put()
PM / devfreq: rockchip-dfi: Add missing of_node_put()
PM / devfreq: Fix multiple kernel-doc warnings
PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()
PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()
PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)
PM / devfreq: Move statistics to separate struct devfreq_stats
PM / devfreq: Add clearing transitions stats
PM / devfreq: Change time stats to 64-bit
PM / devfreq: Add new name attribute for sysfs
...
|
|
* pm-cpufreq:
cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
cpufreq: s3c: fix unbalances of cpufreq policy refcount
cpufreq: imx-cpufreq-dt: Add i.MX8MP support
cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
cpufreq: tegra186: convert to devm_platform_ioremap_resource
cpufreq: kirkwood: convert to devm_platform_ioremap_resource
cpufreq: CPPC: put ACPI table after using it
cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched
* pm-sleep:
PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
PM: hibernate: Add more logging on hibernation failure
PM: hibernate: improve arithmetic division in preallocate_highmem_fraction()
PM: wakeup: Show statistics for deleted wakeup sources again
PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()
|
|
* pm-cpuidle: (27 commits)
intel_idle: Clean up irtl_2_usec()
intel_idle: Move 3 functions closer to their callers
intel_idle: Annotate initialization code and data structures
intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
intel_idle: Rearrange intel_idle_cpuidle_driver_init()
intel_idle: Clean up NULL pointer check in intel_idle_init()
intel_idle: Fold intel_idle_probe() into intel_idle_init()
intel_idle: Eliminate __setup_broadcast_timer()
cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
cpuidle: sysfs: fix warnings when compiling with W=1
cpuidle: coupled: fix warnings when compiling with W=1
Documentation: admin-guide: PM: Add intel_idle document
cpuidle: arm: Enable compile testing for some of drivers
cpuidle: Drop unused cpuidle_driver_ref/unref() functions
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
...
|
|
All usage of this function was removed three years ago, and the
function was marked as deprecated:
a52ad514fdf3 ("net: deprecate eth_change_mtu, remove usage")
So I think we can remove it now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce dev_net variants of netdev notifier register/unregister functions
and allow per-net notifier to follow the netdevice into the namespace it is
moved to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the core functions to chain/unchain
GSO skbs at the frag_list pointer. This also adds
a new GSO type SKB_GSO_FRAGLIST and a is_flist
flag to napi_gro_cb which indicates that this
flow will be GROed by fraglist chaining.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous patch added the NETIF_F_GRO_FRAGLIST feature.
This is a software feature that should default to off.
Current software features default to on, so add a new
feature set that defaults to off.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds new Fraglist GRO/GSO feature flags. They will be used
to configure fraglist GRO/GSO what will be implemented with some
followup paches.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the process of modifying a cpufreq policy, the cpufreq core makes
a copy of it including all of the internals which is stored on the
CPU stack. Because struct cpufreq_policy is relatively large, this
may cause the size of the stack frame to exceed the 2 KB limit and
so the GCC complains when -Wframe-larger-than= is used.
In fact, it is not necessary to copy the entire policy structure
in order to modify it, however.
First, because cpufreq_set_policy() obtains the min and max policy
limits from frequency QoS now, it is not necessary to pass the limits
to it from the callers. The only things that need to be passed to it
from there are the new governor pointer or (if there is a built-in
governor in the driver) the "policy" value representing the governor
choice. They both can be passed as individual arguments, though, so
make cpufreq_set_policy() take them this way and rework its callers
accordingly. This avoids making copies of cpufreq policies in the
callers of cpufreq_set_policy().
Second, cpufreq_set_policy() still needs to pass the new policy
data to the ->verify() callback of the cpufreq driver whose task
is to sanitize the min and max policy limits. It still does not
need to make a full copy of struct cpufreq_policy for this purpose,
but it needs to pass a few items from it to the driver in case they
are needed (different drivers have different needs in that respect
and all of them have to be covered). For this reason, introduce
struct cpufreq_policy_data to hold copies of the members of
struct cpufreq_policy used by the existing ->verify() driver
callbacks and pass a pointer to a temporary structure of that
type to ->verify() (instead of passing a pointer to full struct
cpufreq_policy to it).
While at it, notice that intel_pstate and longrun don't really need
to verify the "policy" value in struct cpufreq_policy, so drop those
check from them to avoid copying "policy" into struct
cpufreq_policy_data (which allows it to be slightly smaller).
Also while at it fix up white space in a couple of places and make
cpufreq_set_policy() static (as it can be so).
Fixes: 3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS")
Link: https://lore.kernel.org/linux-pm/CAMuHMdX6-jb1W8uC2_237m8ctCpsnGp=JCxqt8pCWVqNXHmkVg@mail.gmail.com
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
As we introduced the idle injection cooling device called
cpuidle_cooling, let's be consistent and rename the cpu_cooling to
cpufreq_cooling as this one mitigates with OPPs changes.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
|
|
The cpu idle cooling device offers a new method to cool down a CPU by
injecting idle cycles at runtime.
It has some similarities with the intel power clamp driver but it is
actually designed to be more generic and relying on the idle injection
powercap framework.
The idle injection duration is fixed while the running duration is
variable. That allows to have control on the device reactivity for the
user experience.
An idle state powering down the CPU or the cluster will allow to drop
the static leakage, thus restoring the heat capacity of the SoC. It
can be set with a trip point between the hot and the critical points,
giving the opportunity to prevent a hard reset of the system when the
cpufreq cooling fails to cool down the CPU.
With more sophisticated boards having a per core sensor, the idle
cooling device allows to cool down a single core without throttling
the compute capacity of several cpus belonging to the same clock line,
so it could be used in collaboration with the cpufreq cooling device.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
|
|
The next changes will add a new way to cool down a CPU by injecting
idle cycles. With the current configuration, a CPU cooling device is
the cpufreq cooling device. As we want to add a new CPU cooling
device, let's convert the CPU cooling to a choice giving a list of CPU
cooling devices. At this point, there is obviously only one CPU
cooling device.
There is no functional changes.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20191204153930.9128-1-daniel.lezcano@linaro.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
Here are the USB-serial updates for 5.6-rc1, including:
- a missing ir-usb endpoint sanity check
- fixes for two long-standing regressions in ir-usb
- opticon chars_in_buffer support
Included are also various clean ups.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
USB: serial: ir-usb: simplify endpoint check
USB: serial: ir-usb: make set_termios synchronous
USB: serial: ir-usb: fix IrLAP framing
USB: serial: ir-usb: fix link-speed handling
USB: serial: ir-usb: add missing endpoint sanity check
USB: serial: garmin_gps: Use flexible-array member
USB: serial: opticon: stop all I/O on close()
USB: serial: opticon: add chars_in_buffer() implementation
|
|
The new bitmap function bitmap_cut() copies bits from source to
destination by removing the region specified by parameters first
and cut, and remapping the bits above the cut region by right
shifting them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add util_pre_suspend() and util_pre_resume() for some hv_utils devices
(e.g. kvp/vss/fcopy), because they need special handling before
util_suspend() calls vmbus_close().
For kvp, all the possible pending work items should be cancelled.
For vss and fcopy, some extra clean-up needs to be done, i.e. fake a
THAW message for hv_vss_daemon and fake a CANCEL_FCOPY message for
hv_fcopy_daemon, otherwise when the VM resums back, the daemons
can end up in an inconsistent state (i.e. the file systems are
frozen but will never be thawed; the file transmitted via fcopy
may not be complete). Note: there is an extra patch for the daemons:
"Tools: hv: Reopen the devices if read() or write() returns errors",
because the hv_utils driver can not guarantee the whole transaction
finishes completely once util_suspend() starts to run (at this time,
all the userspace processes are frozen).
util_probe() disables channel->callback_event to avoid the race with
the channel callback.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull block fix from Jens Axboe:
"Unfortunately this weekend we had a few last minute reports, one was
for block.
The partition disable for zoned devices was overly restrictive, it can
work (and be supported) just fine for host-aware variants.
Here's a fix ensuring that's the case so we don't break existing users
of that"
* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
block: allow partitions on host aware zone devices
|
|
Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks. In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices. Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.
Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.
Fixes: 5eac3eb30c9a ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using IPv6 flow-label to swiftly route around avoid congested or
disconnected network path can greatly improve TCP reliability.
This patch adds SNMP counters and a OPT_STATS counter to track both
host-level and connection-level statistics. Network administrators
can use these counters to evaluate the impact of this new ability better.
Export count for rehash attempts to
1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts),
and TcpDuplicateDataRehash (rehash due to receiving duplicate
packets)
2) Timestamping API SOF_TIMESTAMPING_OPT_STATS.
Signed-off-by: Abdul Kabbani <akabbani@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the following sparse errors by annotating the
sighand_struct with __rcu
kernel/fork.c:1511:9: error: incompatible types in comparison expression
kernel/exit.c:100:19: error: incompatible types in comparison expression
kernel/signal.c:1370:27: error: incompatible types in comparison expression
This fix introduces the following sparse error in signal.c due to
checking the sighand pointer without rcu primitives:
kernel/signal.c:1386:21: error: incompatible types in comparison expression
This new sparse error is also fixed in this patch.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20200124045908.26389-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Off by one in mt76 airtime calculation, from Dan Carpenter.
2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca
Coelho.
3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu
Wang.
4) More checks to make sure we only send TSO packets to lan78xx chips
that they can actually handle. From James Hughes.
5) Fix ip_tunnel namespace move, from William Dauchy.
6) Fix unintended packet reordering due to cooperation between
listification done by GRO and non-GRO paths. From Maxim
Mikityanskiy.
7) Add Jakub Kicincki formally as networking co-maintainer.
8) Info leak in airo ioctls, from Michael Ellerman.
9) IFLA_MTU attribute needs validation during rtnl_create_link(), from
Eric Dumazet.
10) Use after free during reload in mlxsw, from Ido Schimmel.
11) Dangling pointers are possible in tp->highest_sack, fix from Eric
Dumazet.
12) Missing *pos++ in various networking seq_next handlers, from Vasily
Averin.
13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael
Ellerman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits)
firestream: fix memory leaks
net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM
net: bcmgenet: Use netif_tx_napi_add() for TX NAPI
tipc: change maintainer email address
net: stmmac: platform: fix probe for ACPI devices
net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path
net/mlx5e: kTLS, Remove redundant posts in TX resync flow
net/mlx5e: kTLS, Fix corner-case checks in TX resync flow
net/mlx5e: Clear VF config when switching modes
net/mlx5: DR, use non preemptible call to get the current cpu number
net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep
net/mlx5: DR, Enable counter on non-fwd-dest objects
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix lowest FDB pool size
net: Fix skb->csum update in inet_proto_csum_replace16().
netfilter: nf_tables: autoload modules from the abort path
netfilter: nf_tables: add __nft_chain_type_get()
netfilter: nf_tables_offload: fix check the chain offload flag
netfilter: conntrack: sctp: use distinct states for new SCTP connections
ipv6_route_seq_next should increase position index
...
|
