| Age | Commit message (Collapse) | Author |
|---|
|
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs into for-6.15/io_uring-epoll-wait
Merge epoll changes from the VFS tree, which the io_uring changes depend
on.
* 'vfs-6.15.eventpoll' of https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
|
|
* for-6.15/io_uring-rx-zc: (77 commits)
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
net: page_pool: add a mp hook to unregister_netdevice*
net: page_pool: add callback for mp info printing
netdev: add io_uring memory provider info
...
|
|
* for-6.15/io_uring: (30 commits)
io_uring: use lockless_cq flag in io_req_complete_post()
io_uring: pass struct io_tw_state by value
io_uring: introduce type alias for io_tw_state
io_uring/rsrc: avoid NULL check in io_put_rsrc_node()
io_uring: pass ctx instead of req to io_init_req_drain()
io_uring: use IO_REQ_LINK_FLAGS more
io_uring/net: improve recv bundles
io_uring/waitid: use generic io_cancel_remove() helper
io_uring/futex: use generic io_cancel_remove() helper
io_uring/cancel: add generic cancel helper
io_uring/waitid: convert to io_cancel_remove_all()
io_uring/futex: convert to io_cancel_remove_all()
io_uring/cancel: add generic remove_all helper
io_uring/kbuf: uninline __io_put_kbufs
io_uring/kbuf: introduce io_kbuf_drop_legacy()
io_uring/kbuf: open code __io_put_kbuf()
io_uring/kbuf: remove legacy kbuf caching
io_uring/kbuf: simplify __io_put_kbuf
io_uring/kbuf: move locking into io_kbuf_drop()
io_uring/kbuf: remove legacy kbuf kmem cache
...
|
|
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The following functions have been in the mei code for
a long time but have never been used.
mei_txe_setup_satt2() was added in 2014 by
commit 32e2b59fca2c ("mei: txe: add hw-txe.c")
mei_me_cl_rm_by_uuid_id() was added in 2015 by
commit 79563db9ddd3 ("mei: add reference counting for me clients")
mei_cldev_uuid() was added in 2015 by
commit baeacd037697 ("mei: bus: export uuid and protocol version to mei_cl
bus drivers")
mei_cldev_recv_nonblock() was added in 2016 by
commit 076802d00615 ("mei: bus: enable non-blocking RX")
it is the only user of mei_cldev_recv_nonblock_vtag().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250130012654.255119-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Interrupt controller drivers which enable CONFIG_GENERIC_PENDING_IRQ
require to know whether an interrupt can be moved in process context or not
to decide whether they need to invoke the work around for non-atomic MSI
updates or not.
This information can be retrieved via irq_can_move_pcntxt(). That helper
requires access to the top-most interrupt domain data, but the driver which
requires this is usually further down in the hierarchy.
Introduce irq_can_move_in_process_context() which retrieves that
information from the top-most interrupt domain data.
[ tglx: Massaged change log ]
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-6-apatel@ventanamicro.com
|
|
CONFIG_GENERIC_PENDING_IRQ requires an architecture specific implementation
of irq_force_complete_move() for CPU hotplug. At the moment, only x86
implements this unconditionally, but for RISC-V irq_force_complete_move()
is only needed when the RISC-V IMSIC driver is in use and not needed
otherwise.
To allow runtime configuration of this mechanism, introduce a common
irq_force_complete_move() implementation in the interrupt core code, which
only invokes the completion function, when a interrupt chip in the
hierarchy implements it.
Switch X86 over to the new mechanism. No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-5-apatel@ventanamicro.com
|
|
msi_lib_init_dev_msi_info() sets the default irq_eoi()/irq_ack() callbacks
unconditionally. This is correct for all existing users, but prevents the
IMSIC driver to be moved to the MSI library implementation.
Introduce chip_flags in struct msi_parent_ops, which instruct the library
to selectively set the callbacks depending on the flags, and update all
current users to set them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-3-apatel@ventanamicro.com
|
|
Remove return since both device_remove_group() and device_remove_groups()
are void functions.
Fixes: e323b2dddc1c ("driver core: add device_{add|remove}_group() helpers")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250208-fix_device_remove_group-v1-1-8a5b0ac0ce5c@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove return since both class_remove_file() and class_remove_file_ns()
are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250208-cls_rmv_return-v1-1-091b37945aac@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After the previous commit is finally safe to revert commit dbae2b062824
("net: skb: introduce and use a single page frag cache"): do it here.
The intended goal of such change was to counter a performance regression
introduced by commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to recent updates
in the affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b062824 ("net: skb: introduce and use a single page frag cache")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Basic helper that copies ready events to the specified userspace
address. The event checking is quick and racy, it's up to the caller
to ensure it retries appropriately in case 0 events are copied.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250219172552.1565603-4-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/
Cc: kuniyu@amazon.com
Cc: ushankar@purestorage.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->plat->fix_mac_speed() is called from stmmac_mac_link_up(), which
is passed the speed as an "int". However, fix_mac_speed() implicitly
casts this to an unsigned int. Some platform glue code print this value
using %u, others with %d. Some implicitly cast it back to an int, and
others to u32.
Good practice is to use one type and only one type to represent a value
being passed around a driver.
Switch all of these over to consistently use "int" when dealing with a
speed passed from stmmac_mac_link_up(), even though the speed will
always be positive.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/E1tkKmN-004ObM-Ge@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to `access_process_vm()` but specific to strings. Also chunks
reads by page and utilizes `strscpy()` for handling null termination.
The primary motivation for this change is to copy strings from
a non-current task/process in BPF. There is already a helper
`bpf_copy_from_user_task()`, which uses `access_process_vm()` but one to
handle strings would be very helpful.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20250213152125.1837400-1-linux@jordanrome.com
|
|
Report VOLTAGE_MAX_DESIGN for the bq27x00 and bq27x10 fuel gauges. Per the
datasheet, this value is stored in the Charge Termination Voltage Settings
(QV0 and QV1) of the Pack Configuration register.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207211521.103357-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
A recent discussion has revealed that using DPM_FLAG_SMART_SUSPEND
unconditionally is generally problematic because it may lead to
situations in which the device's runtime PM information is internally
inconsistent or does not reflect its real state [1].
For this reason, change the handling of DPM_FLAG_SMART_SUSPEND so that
it is only taken into account if it is consistently set by the drivers
of all devices having any PM callbacks throughout dependency graphs in
accordance with the following rules:
- The "smart suspend" feature is only enabled for devices whose drivers
ask for it (that is, set DPM_FLAG_SMART_SUSPEND) and for devices
without PM callbacks unless they have never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for the device's parent unless the parent does not take
children into account or it has never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for one of the device's suppliers taking runtime PM into
account unless that supplier has never had runtime PM enabled.
Namely, introduce a new device PM flag called smart_suspend that is only
set if the above conditions are met and update all DPM_FLAG_SMART_SUSPEND
users to check power.smart_suspend instead of directly checking the
latter.
At the same time, drop the power.set_active flage introduced recently
in commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status
of parents and children") because it is now sufficient to check
power.smart_suspend along with the dev_pm_skip_resume() return value
to decide whether or not pm_runtime_set_active() needs to be called
for the device.
Link: https://lore.kernel.org/linux-pm/CAPDyKFroyU3YDSfw_Y6k3giVfajg3NQGwNWeteJWqpW29BojhQ@mail.gmail.com/ [1]
Fixes: 7585946243d6 ("PM: sleep: core: Restrict power.set_active propagation")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Link: https://patch.msgid.link/1914558.tdWV9SEqCh@rjwysocki.net
|
|
Compute env->peak_states as a maximum value of sum of
env->explored_states and env->free_list size.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When fixes from patches 1 and 3 are applied, Patrick Somaru reported
an increase in memory consumption for sched_ext iterator-based
programs hitting 1M instructions limit. For example, 2Gb VMs ran out
of memory while verifying a program. Similar behaviour could be
reproduced on current bpf-next master.
Here is an example of such program:
/* verification completes if given 16G or RAM,
* final env->free_list size is 369,960 entries.
*/
SEC("raw_tp")
__flag(BPF_F_TEST_STATE_FREQ)
__success
int free_list_bomb(const void *ctx)
{
volatile char buf[48] = {};
unsigned i, j;
j = 0;
bpf_for(i, 0, 10) {
/* this forks verifier state:
* - verification of current path continues and
* creates a checkpoint after 'if';
* - verification of forked path hits the
* checkpoint and marks it as loop_entry.
*/
if (bpf_get_prandom_u32())
asm volatile ("");
/* this marks 'j' as precise, thus any checkpoint
* created on current iteration would not be matched
* on the next iteration.
*/
buf[j++] = 42;
j %= ARRAY_SIZE(buf);
}
asm volatile (""::"r"(buf));
return 0;
}
Memory consumption increased due to more states being marked as loop
entries and eventually added to env->free_list.
This commit introduces logic to free states from env->free_list during
verification. A state in env->free_list can be freed if:
- it has no child states;
- it is not used as a loop_entry.
This commit:
- updates bpf_verifier_state->used_as_loop_entry to be a counter
that tracks how many states use this one as a loop entry;
- adds a function maybe_free_verifier_state(), which:
- frees a state if its ->branches and ->used_as_loop_entry counters
are both zero;
- if the state is freed, state->loop_entry->used_as_loop_entry is
decremented, and an attempt is made to free state->loop_entry.
In the example above, this approach reduces the maximum number of
states in the free list from 369,960 to 16,223.
However, this approach has its limitations. If the buf size in the
example above is modified to 64, state caching overflows: the state
for j=0 is evicted from the cache before it can be used to stop
traversal. As a result, states in the free list accumulate because
their branch counters do not reach zero.
The effect of this patch on the selftests looks as follows:
File Program Max free list (A) Max free list (B) Max free list (DIFF)
-------------------------------- ------------------------------------ ----------------- ----------------- --------------------
arena_list.bpf.o arena_list_add 17 3 -14 (-82.35%)
bpf_iter_task_stack.bpf.o dump_task_stack 39 9 -30 (-76.92%)
iters.bpf.o checkpoint_states_deletion 265 89 -176 (-66.42%)
iters.bpf.o clean_live_states 19 0 -19 (-100.00%)
profiler2.bpf.o tracepoint__syscalls__sys_enter_kill 102 1 -101 (-99.02%)
profiler3.bpf.o tracepoint__syscalls__sys_enter_kill 144 0 -144 (-100.00%)
pyperf600_iter.bpf.o on_event 15 0 -15 (-100.00%)
pyperf600_nounroll.bpf.o on_event 1170 1158 -12 (-1.03%)
setget_sockopt.bpf.o skops_sockopt 18 0 -18 (-100.00%)
strobemeta_nounroll1.bpf.o on_event 147 83 -64 (-43.54%)
strobemeta_nounroll2.bpf.o on_event 312 209 -103 (-33.01%)
strobemeta_subprogs.bpf.o on_event 124 86 -38 (-30.65%)
test_cls_redirect_subprogs.bpf.o cls_redirect 15 0 -15 (-100.00%)
timer.bpf.o test1 30 15 -15 (-50.00%)
Measured using "do-not-submit" patches from here:
https://github.com/eddyz87/bpf/tree/get-loop-entry-hungup
Reported-by: Patrick Somaru <patsomaru@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The next patch in the set needs the ability to remove individual
states from env->free_list while only holding a pointer to the state.
Which requires env->free_list to be a doubly linked list.
This patch converts env->free_list and struct bpf_verifier_state_list
to use struct list_head for this purpose. The change to
env->explored_states is collateral.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
genphy_c45_eee_is_active
After the last user has gone, we can remove the local advertisement
parameter from genphy_c45_eee_is_active.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/bd121330-9e28-4bc8-8422-794bd54d561f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a mode is to be disabled, remove it from advertising_eee.
Disabling EEE modes shall be done before calling phy_start(),
warn if that's not the case.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/92164896-38ff-4474-b98b-e83fc05b9509@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation of a follow-up patch, move phy_is_started() to before
phy_disable_eee_mode().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/04d1e7a5-f4c0-42ab-8fa4-88ad26b74813@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new helper function called pm_runtime_blocked()
for checking the power.last_status value indicating whether or not
enabling runtime PM for the given device has been blocked (which
happens in the "prepare" phase of system-wide suspend if runtime
PM is disabled for the given device at that point).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/4632087.LvFx2qVVIh@rjwysocki.net
|
|
If device_prepare() runs on a device that has never had runtime
PM enabled so far, it may reasonably assume that runtime PM will
not be enabled for that device during the system suspend-resume
cycle currently in progress, but this has never been guaranteed.
To verify this assumption, make device_prepare() arrange for
triggering a device warning accompanied by a call trace dump if
runtime PM is enabled for such a device after it has returned.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6131109.lOV4Wx5bFT@rjwysocki.net
|
|
There are only two callers of __pm_runtime_disable(), one of which is
device_suspend_late() and the other is pm_runtime_disable() that has
its own kerneldoc comment and there are no plans to add any more of
them. Since they use different values of the __pm_runtime_disable()
second parameter, the actual code behavior is different in each case,
but it is all documented in the __pm_runtime_disable() kerneldoc comment
which is not particularly straightforward.
For this reason, move the information from the __pm_runtime_disable()
kerneldoc comment to the pm_runtime_disable() one and into a separate
comment in device_suspend_late() and remove the __pm_runtime_disable()
kerneldoc comment altogether.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12617588.O9o76ZdvQC@rjwysocki.net
|
|
Drivers usually call this method on error/exit paths and do not check
for it's return value, which is always 0 anyway, so make it void.
This is safe to do as currently all drivers use
devm_platform_profile_register().
While at it, improve the style and make the function safer by checking
for IS_ERR_OR_NULL before dereferencing the device pointer.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250212190308.21209-1-kuurtb@gmail.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly large collection of fixes, spread over various drivers.
Almost all are small and device-specific fixes and quirks in ASoC SOF
Intel and AMD, Renesas, Cirrus, HD-audio, in addition to a small fix
for MIDI 2.0"
* tag 'sound-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
ALSA: seq: Drop UMP events when no UMP-conversion is set
ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED
ALSA: hda/cirrus: Reduce codec resume time
ALSA: hda/cirrus: Correct the full scale volume set logic
virtio_snd.h: clarify that `controls` depends on VIRTIO_SND_F_CTLS
ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()
ALSA: hda/tas2781: Fix index issue in tas2781 hda SPI driver
ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device
ALSA: hda/realtek: Fixup ALC225 depop procedure
ALSA: hda/tas2781: Update tas2781 hda SPI driver
ASoC: cs35l41: Fix acpi_device_hid() not found
ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler
ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
ASoC: SOF: amd: Drop unused includes from Vangogh driver
ASoC: SOF: amd: Add post_fw_run_delay ACP quirk
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13
ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support
ALSA: Switch to use hrtimer_setup()
ALSA: hda: hda-intel: add Panther Lake-H support
ASoC: SOF: Intel: pci-ptl: Add support for PTL-H
...
|
|
Client drivers might want a copy of the crashlog to stash into a
devcoredump blob. Since device memory management can be very variable,
the actual devcoredump implementation is left to client drivers. Pass
the raw crashlog buffer to the client callback so it can use it if
desired.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250202-rtkit-crashdump-v1-1-9d38615b4e12@asahilina.net
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
The function has to track number of iterations to prevent an infinite
loop. for_each_cpu_wrap() macro takes care of it, which simplifies user
code.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The iterators are trivial extensions of for_each_cpu_wrap(). They
are used in the following patches of the series to replace
cpumask_next_wrap().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The bitmap_scatter() mistakenly refers to itself for detailed explanation
about the relationships of two. Instead of simply fixing this, align text
in both making a cross-reference.
Fixes: de5f84338970 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Reorganized the enum used to define the fields of the contrller
configuration (CC) register in include/linux/nvme.h to:
1) Group together all the values defined for each field.
2) Add the missing field masks definitions.
3) Add comments to describe the enum and each field.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.
Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Hardware timestamping is only used on tegra186 platforms but we include
the code and export the symbols everywhere. Shrink the binary a bit by
compiling the relevant functions conditionally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We have several conditional includes depending on !CONFIG_GPIOLIB. This
is supposed to reduce compilation time with CONFIG_GPIOLIB=y but in
practice there's no difference on modern machines. It makes adding new
stubs that depend on more than just GPIOLIB harder so move them all to
the top, unduplicate them and replace asm/ with preferred linux/
alternatives.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Move the following sysctl tables into arch/x86/kernel/setup.c:
panic_on_{unrecoverable_nmi,io_nmi}
bootloader_{type,version}
io_delay_type
unknown_nmi_panic
acpi_realmode_flags
Variables moved from include/linux/ to arch/x86/include/asm/ because there
is no longer need for them outside arch/x86/kernel:
acpi_realmode_flags
panic_on_{unrecoverable_nmi,io_nmi}
Include <asm/nmi.h> in arch/s86/kernel/setup.h in order to bring in
panic_on_{io_nmi,unrecovered_nmi}.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-8-cd3698ab8d29@kernel.org
|
|
Pick up upstream x86 fixes before applying new patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Most of this patch is generated by Coccinelle. Except for the TX thrtimer
in bcm_tx_setup() because this timer is not used and the callback function
is never set. For this particular case, set the callback to
hrtimer_dummy_timeout()
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/a3a6be42c818722ad41758457408a32163bfd9a0.1738746872.git.namcao@linutronix.de
|
|
x86-64 was the last user.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-13-brgerst@gmail.com
|
|
When a process reduces its number of threads or clears bits in its CPU
affinity mask, the mm_cid allocation should eventually converge towards
smaller values.
However, the change introduced by:
commit 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency
IDs for intermittent workloads")
adds a per-mm/CPU recent_cid which is never unset unless a thread
migrates.
This is a tradeoff between:
A) Preserving cache locality after a transition from many threads to few
threads, or after reducing the hamming weight of the allowed CPU mask.
B) Making the mm_cid upper bounds wrt nr threads and allowed CPU mask
easy to document and understand.
C) Allowing applications to eventually react to mm_cid compaction after
reduction of the nr threads or allowed CPU mask, making the tracking
of mm_cid compaction easier by shrinking it back towards 0 or not.
D) Making sure applications that periodically reduce and then increase
again the nr threads or allowed CPU mask still benefit from good
cache locality with mm_cid.
Introduce the following changes:
* After shrinking the number of threads or reducing the number of
allowed CPUs, reduce the value of max_nr_cid so expansion of CID
allocation will preserve cache locality if the number of threads or
allowed CPUs increase again.
* Only re-use a recent_cid if it is within the max_nr_cid upper bound,
else find the first available CID.
Fixes: 7e019dcc470f ("sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lkml.kernel.org/r/20250210153253.460471-2-gmonaco@redhat.com
|
|
Allows struct_ops programs to acqurie referenced kptrs from arguments
by directly reading the argument.
The verifier will acquire a reference for struct_ops a argument tagged
with "__ref" in the stub function in the beginning of the main program.
The user will be able to access the referenced kptr directly by reading
the context as long as it has not been released by the program.
This new mechanism to acquire referenced kptr (compared to the existing
"kfunc with KF_ACQUIRE") is introduced for ergonomic and semantic reasons.
In the first use case, Qdisc_ops, an skb is passed to .enqueue in the
first argument. This mechanism provides a natural way for users to get a
referenced kptr in the .enqueue struct_ops programs and makes sure that a
qdisc will always enqueue or drop the skb.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, ctx_arg_info is read-only in the view of the verifier since
it is shared among programs of the same attach type. Make each program
have their own copy of ctx_arg_info so that we can use it to store
program specific information.
In the next patch where we support acquiring a referenced kptr through a
struct_ops argument tagged with "__ref", ctx_arg_info->ref_obj_id will
be used to store the unique reference object id of the argument. This
avoids creating a requirement in the verifier that "__ref" tagged
arguments must be the first set of references acquired [0].
[0] https://lore.kernel.org/bpf/20241220195619.2022866-2-amery.hung@gmail.com/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice, iavf: Add support for Rx timestamping
Mateusz Polchlopek says:
Initially, during VF creation it registers the PTP clock in
the system and negotiates with PF it's capabilities. In the
meantime the PF enables the Flexible Descriptor for VF.
Only this type of descriptor allows to receive Rx timestamps.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Enable timestamping should be done using userspace tools, e.g.
hwstamp_ctl -i $VF -r 14
In order to report the timestamps to userspace, the VF extends
timestamp to 40b.
To support this feature the flexible descriptors and PTP part
in iavf driver have been introduced.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for Rx timestamps to hotpath
iavf: handle set and get timestamps ops
iavf: Implement checking DD desc field
iavf: refactor iavf_clean_rx_irq to support legacy and flex descriptors
iavf: define Rx descriptors as qwords
libeth: move idpf_rx_csum_decoded and idpf_rx_extracted
iavf: periodically cache PHC time
iavf: add support for indirect access to PHC time
iavf: add initial framework for registering PTP clock
iavf: negotiate PTP capabilities
iavf: add support for negotiating flexible RXDID format
virtchnl: add enumeration for the rxdid format
ice: support Rx timestamp on flex descriptor
virtchnl: add support for enabling PTP on iAVF
====================
Link: https://patch.msgid.link/20250214192739.1175740-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper which returns the tx amplitude gain defined in device tree.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-2-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"It was reported that the acct(2) system call can be used to trigger a
NULL deref in cases where it is set to write to a file that triggers
an internal lookup.
This can e.g., happen when pointing acct(2) to /sys/power/resume. At
the point the where the write to this file happens the calling task
has already exited and called exit_fs() but an internal lookup might
be triggered through lookup_bdev(). This may trigger a NULL-deref when
accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
Also block access to kernel internal filesystems as well as procfs and
sysfs in the first place.
Various fixes for netfslib:
- Fix a number of read-retry hangs, including:
- Incorrect getting/putting of references on subreqs as we retry
them
- Failure to track whether a last old subrequest in a retried set
is superfluous
- Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue)
- Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code
- Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all"
* tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
acct: block access to kernel internal filesystems
acct: perform last write from workqueue
|
|
Allow arch_freq_get_on_cpu to return an error for cases when retrieving
current CPU frequency is not possible, whether that being due to lack of
required arch support or due to other circumstances when the current
frequency cannot be determined at given point of time.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250131162439.3843071-2-beata.michalska@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Framework notifications are doorbells that are rung by the partition
managers to signal common events to an endpoint. These doorbells cannot
be rung by an endpoint directly. A partition manager can signal a
Framework notification in response to an FF-A ABI invocation by an
endpoint.
Two additional notify_ops interface is being added for any FF-A device/
driver to register and unregister for such a framework notifications.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-16-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
