| Age | Commit message (Collapse) | Author |
|---|
|
Expose struct amd_cpudata to AMD P-State unit test module.
This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull MMC updates from Ulf Hansson:
- dt-bindings: Increase maximum supported frequency to 384MHz
- dw_mmc-rockchip: Add support for the rk3128 variant
- meson-gx: Add support for SDIO interrupts
- mtk-sd: Add support for MT6795 Helio X10 variant
- sdhci: Improve the code by centralizing the CMD/DATA reset handling
- sdhci-msm:
- Add support for the sdm670 variant
- Add support for the sm6115 variant
- sdhci-omap: Make Vignesh replace Kishon as the maintainer
- sdhci-pci-o2micro: Disable fragile support for DDR50 in favor of
SDR50
- sdhci-sprd: Fix clock divider limitation
* tag 'mmc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (31 commits)
mmc: sdhci: Centralize CMD and DATA reset handling
mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS
mmc: sdhci: Remove misleading comment about resets
mmc: sdhci: Separate out sdhci_reset_for_all()
MAINTAINERS: Add Vignesh as maintainer of TI SDHCI OMAP DRIVER
mmc: sdhci-msm: add compatible string check for sdm670
dt-bindings: mmc: sdhci-msm: add sdm670 compatible
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
mmc: rtsx_usb_sdmmc: Remove the unneeded result variable
mmc: sdhci-of-aspeed: Add dependency on ARCH_ASPEED
mmc: mtk-sd: Add support for MT6795 Helio X10
mmc: mtk-sd: Reorder of_device_id and platform data by name
mmc: sdhci-sprd: Fix the limitation of div
dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property
dt-bindings: mmc: rockchip: add rockchip,rk3128-dw-mshc
dt-bindings: mmc: renesas,sdhi: Add iommus property
mmc: sdhci_am654: Remove the unneeded result variable
mmc: meson-gx: add SDIO interrupt support
mmc: meson-gx: adjust and re-use constant IRQ_EN_MASK
mmc: jz4740_mmc: Fix error check for dma_map_sg
...
|
|
- Add hanlding of all Bluetooth HID++ devices and fixes in hid++
(Bastien Nocera)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"With the exception of some refactoring to fix long standing issues
where we weren't handling cache syncs properly for messages which had
PIO and DMA transfers going to the same page correctly there has been
no work on the core this time around, and it's also been quite a quiet
release for the drivers too:
- Fix cache syncs for cases where we have DMA and PIO transfers in
the same message going to the same page
- Update the fsl_spi driver to use transfer_one() rather than a
custom transfer function
- Support for configuring transfer speeds with the AMD SPI controller
- Support for a second chip select and 64K erase on Intel SPI
- Support for Microchip coreQSPI, Nuvoton NPCM845, NXP i.MX93, and
Rockchip RK3128 and RK3588"
* tag 'spi-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (73 commits)
spi: Ensure that sg_table won't be used after being freed
spi: spi-gxp: Use devm_platform_ioremap_resource()
spi: s3c64xx: Fix large transfers with DMA
spi: Split transfers larger than max size
spi: Fix cache corruption due to DMA/PIO overlap
spi: Save current RX and TX DMA devices
spi: mt65xx: Add dma max segment size declaration
spi: migrate mt7621 text bindings to YAML
spi: renesas,sh-msiof: Add r8a779g0 support
spi: spi-fsl-qspi: Use devm_platform_ioremap_resource_byname()
spi: spi-fsl-lpspi: Use devm_platform_get_and_ioremap_resource()
spi: spi-fsl-dspi: Use devm_platform_get_and_ioremap_resource()
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
spi: cadence-quadspi: Fix PM disable depth imbalance in cqspi_probe
spi: s3c24xx: Switch to use devm_spi_alloc_master()
spi: xilinx: Switch to use devm_spi_alloc_master()
spi: img-spfi: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
spi: aspeed: Remove redundant dev_err call
spi: spi-mpc52xx: switch to using gpiod API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The core work this time around has mostly been around the code to
manage regulator modes, simplifying the interface for configuring
modes to not take account of the voltage and as a side effect
resolving a bootstrapping issue on systems where we can't read the
voltage from the regulator.
Otherwise it's been quite a quiet release with some new drivers and a
devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load
configuration
- devm helper for a combined get and enable operation
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219"
* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
dt-bindings: gpio-regulator: add vin-supply property support
regulator: gpio: Add input_supply support in gpio_regulator_config
regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
regulator: qcom,rpmh: add pm660 and pm660l pmics
regulator: qcom-rpmh: add pm660 and pm660l pmics
regulator: of: Fix kernel-doc
regulator: of: Fix kernel-doc
regulator: Add driver for MT6332 PMIC regulators
regulator: Add bindings for MT6332 regulator
regulator: Add driver for MT6331 PMIC regulators
regulator: Add bindings for MT6331 regulator
regulator: tps65219: Fix .bypass_val_on setting
regulator: qcom_rpm: Fix circular deferral regression
regulator: core: Prevent integer underflow
regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
regulator: bd9576: switch to using devm_fwnode_gpiod_get()
regulator: bd71815: switch to using devm_fwnode_gpiod_get()
regulator: core: Fix regulator supply registration with sysfs
regulator: tps65219: change tps65219_regulator_irq_types to static
regulator: core: Don't err if allow-set-load but no allowed-modes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a busy release for regmap with one thing and other,
there's been an especially large interest in MMIO regmaps for some
reason. The bulk of the changes are cleanups but there are several
user visible changes too:
- Support for I/O ports in regmap-mmio
- Support for accelerated noinc operations in regmap-mmio
- Support for tracing the register values in bulk operations"
* tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: mmio: replace return 0 with break in switch statement
regmap: spi-avmm: Use swabXX_array() helpers
regmap: mmio: Use swabXX_array() helpers
swab: Add array operations
regmap: trace: Remove unneeded blank lines
regmap: trace: Remove explicit castings
regmap: trace: Remove useless check for NULL for bulk ops
regmap: mmio: Fix rebase error
regmap: check right noinc bounds in debug print
regmap: introduce value tracing for regmap bulk operations
regmap/hexagon: Properly fix the generic IO helpers
regmap: mmio: Support accelerared noinc operations
regmap: Support accelerated noinc operations
regmap: Make use of get_unaligned_be24(), put_unaligned_be24()
regmap: mmio: Fix MMIO accessors to avoid talking to IO port
regmap: mmio: Introduce IO accessors that can talk to IO port
regmap: mmio: Get rid of broken 64-bit IO
regmap: mmio: Remove mmio_relaxed member from context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
Removed drivers:
- Drop obsolete asus_wmi_ec_sensors driver
Cleanups, affecting various drivers:
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
Other notable cleanup and improvements:
- Support for additional USB devide ID and support for reporting of
rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next
driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device
revision
And various other minor fixes and cleanups"
* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
|
This patch supports to record detail reason of FSCORRUPTED error into
f2fs_super_block.s_errors[].
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to record stop_checkpoint error into
f2fs_super_block.s_stop_reason[].
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Update the _EXPORT_DEV_PM_OPS() internal macro. It was not used anywhere
outside pm.h and pm_runtime.h, so it is safe to update it.
Before, this macro would take a few parameters to be used as sleep and
runtime callbacks. This made it unsuitable to use with different
callbacks, for instance the "noirq" ones.
It is now semantically different: instead of creating a conditionally
exported dev_pm_ops structure, it only contains part of the definition.
This macro should however never be used directly (hence the trailing
underscore). Instead, the following four macros are provided:
- EXPORT_DEV_PM_OPS(name)
- EXPORT_GPL_DEV_PM_OPS(name)
- EXPORT_NS_DEV_PM_OPS(name, ns)
- EXPORT_NS_GPL_DEV_PM_OPS(name, ns)
For instance, it is now possible to conditionally export noirq
suspend/resume PM functions like this:
EXPORT_GPL_DEV_PM_OPS(foo_pm_ops) = {
NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
};
The existing helper macros EXPORT_*_SIMPLE_DEV_PM_OPS() and
EXPORT_*_RUNTIME_DEV_PM_OPS() have been updated to use these new macros.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Many of the mdev drivers use a simple counter for keeping track of the
available instances. Move this code to the core code and store the counter
in the mdev_parent. Implement it using correct locking, fixing mdpy.
Drivers just provide the value in the mdev_driver at registration time
and the core code takes care of maintaining it and exposing the value in
sysfs.
[hch: count instances per-parent instead of per-type, use an atomic_t
to avoid taking mdev_list_lock in the show method]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a string, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Remove the now unused types_attrs field in struct mdev_driver and the
support code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-14-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
mdev_bus_type is only used in mdev.ko now, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-8-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-7-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Include <linux/device.h> and <linux/uuid.h> so that users of this headers
don't need to do that and remove those includes that aren't needed
any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
into clk-next
- More devm helpers for fixed rate registration
- Add Spreadtrum UMS512 SoC clk support
- Various PXA168 clk driver fixes
* clk-fixed-rate:
clk: fixed-rate: add devm_clk_hw_register_fixed_rate
clk: asm9260: use parent index to link the reference clock
* clk-spreadtrum:
clk: sprd: Add clocks support for UMS512
* clk-pxa:
clk: pxa: add a check for the return value of kzalloc()
clk: mmp: pxa168: control shared SDH bits with separate clock
dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks
clk: mmp: pxa168: add clocks for SDH2 and SDH3
dt-bindings: marvell,pxa168: add clock id for SDH3
clk: mmp: pxa168: fix GPIO clock enable bits
clk: mmp: pxa168: add muxes for more peripherals
clk: mmp: pxa168: fix incorrect parent clocks
clk: mmp: pxa168: fix const-correctness
clk: mmp: pxa168: add new clocks for peripherals
dt-bindings: marvell,pxa168: add clock ids for additional dividers
clk: mmp: pxa168: fix incorrect dividers
clk: mmp: pxa168: add additional register defines
* clk-ti:
clk: davinci: cfgchip: Use dev_err_probe() helper
clk: davinci: pll: fix spelling typo in comment
MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
|
|
into clk-next
- Add resets for MediaTek MT8195 PCIe and USB
- Remove DaVinci DM644x and DM646x clk driver support
* clk-samsung:
clk: samsung: MAINTAINERS: add Krzysztof Kozlowski
clk: samsung: exynos850: Implement CMU_MFCMSCL domain
clk: samsung: exynos850: Implement CMU_IS domain
clk: samsung: exynos850: Implement CMU_AUD domain
clk: samsung: exynos850: Style fixes
clk: samsung: exynosautov9: add fsys1 clock support
clk: samsung: exynosautov9: add fsys0 clock support
clk: samsung: exynosautov9: correct register offsets of peric0/c1
clk: samsung: exynosautov9: add missing gate clks for peric0/c1
dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL
dt-bindings: clock: exynos850: Add Exynos850 CMU_IS
dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD
dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1
dt-bindings: clock: exynosautov9: add fsys1 clock definitions
dt-bindings: clock: exynosautov9: add fys0 clock definitions
clk: samsung: exynos7885: Add TREX clocks
clk: samsung: exynos7885: Implement CMU_FSYS domain
dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1
clk: samsung: exynos-clkout: Use of_device_get_match_data()
* clk-mtk: (42 commits)
clk: mediatek: add driver for MT8365 SoC
clk: mediatek: Export required common code symbols
clk: mediatek: Provide mtk_devm_alloc_clk_data
dt-bindings: clock: mediatek: add bindings for MT8365 SoC
clk: mediatek: mt8192: deduplicate parent clock lists
clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*()
clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup
clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel
clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent
clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents
clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier
clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux
clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes
clk: mediatek: mt8183: Add clk mux notifier for MFG mux
clk: mediatek: mux: add clk notifier functions
clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe
clk: mediatek: gate: Export mtk_clk_register_gates_with_dev
clk: mediatek: add VDOSYS1 clock
dt-bindings: clk: mediatek: Add MT8195 DPI clocks
...
* clk-rm:
clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x
* clk-ast:
clk: ast2600: BCLK comes from EPLL
* clk-qcom: (97 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8939: use parent_hws where possible
dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml
clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs
clk: qcom: gcc-sc8280xp: use retention for USB power domains
clk: qcom: gdsc: add missing error handling
dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos
clk: qcom: Add global clock controller driver for SM6375
dt-bindings: clock: add SM6375 QCOM global clock bindings
clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit
clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs
clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc
clk: qcom: gdsc: Fix the handling of PWRSTS_RET support
clk: qcom: Add SC8280XP GPU clock controller
dt-bindings: clock: Add Qualcomm SC8280XP GPU binding
clk: qcom: smd: Add SM6375 clocks
...
|
|
'clk-xilinx' into clk-next
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
* clk-ofnode:
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: tegra20: Fix refcount leak in tegra20_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: sprd: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: at91: dt-compat: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: st: Hold reference returned by of_get_parent()
clk: tegra: Add missing of_node_put()
clk: meson: Hold reference returned by of_get_parent()
clk: nomadik: Add missing of_node_put()
* clk-bindings:
dt-bindings: clock: drop minItems equal to maxItems
dt-bindings: clock: gpio-gate-clock: Convert to json-schema
dt-bindings: clock: Move versaclock.h to dt-bindings/clock
dt-bindings: clock: Move lochnagar.h to dt-bindings/clock
* clk-cleanup:
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: nxp: fix typo in comment
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clkdev: Simplify devm_clk_hw_register_clkdev() function
clkdev: Remove never used devm_clk_release_clkdev()
clk: Remove never used devm_of_clk_del_provider()
clk: pistachio: Fix initconst confusion
clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data
clk: do not initialize ret
clk: remove extra empty line
clk: Fix comment typo
clk: move from strlcpy with unused retval to strscpy
* clk-zynq:
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
clk: zynqmp: Check the return type zynqmp_pm_query_data
clk: zynqmp: Add a check for NULL pointer
clk: zynqmp: Replaced strncpy() with strscpy()
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
clk: zynqmp: make bestdiv unsigned
* clk-xilinx:
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: clocking-wizard: Update the compatible
clk: clocking-wizard: Fix the reconfig for 5.2
clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs
clk: clocking-wizard: Move clocking-wizard out
dt-bindings: add documentation of xilinx clocking wizard
|
|
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core fixes from Borislav Petkov:
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest
- Clean up pciserial a bit
* tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,retpoline: Be sure to emit INT3 after JMP *%\reg
x86/earlyprintk: Clean up pciserial
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the
ACPI facilities but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
* tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
EDAC/ie31200: Add Skylake-S support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control fixes for 6.1-rc1 from Daniel Lezcano:
"- Used the platform data to get the sensor id instead of parsing the
device in the driver and remove the dedicated OF function (Daniel
Lezcano)
- Fixed Kconfig dependency for the QCom tsens driver (Jonathan Cameron)
- Fixed missing const annotation for the RCar ops driver and removed a
duplicate parameter check (Lad Prabhakar)
- Fixed a NULL pointer dereference when calling set_trip_temp() (Lad
Prabhakar)
- Fixed the fourth hardware id in the QCom tsens driver (Vincent
Knecht)"
* tag 'thermal-v6.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
|
|
If CONFIG_IO_URING is not set:
include/linux/io_uring.h:65:12: error: ‘io_uring_cmd_import_fixed’ defined but not used [-Werror=unused-function]
65 | static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by adding the missing "inline" keyword.
Fixes: a9216fac3ed8819c ("io_uring: add io_uring_cmd_import_fixed")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7404b4a696f64e33e5ef3c5bd3754d4f26d13e50.1664887093.git.geert+renesas@glider.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I'm a flamin' moron; because even after Mark told me it should be '&&'
I still got it wrong in the final commit.
Fixes: f3c0eba28704 ("perf: Add a few assertions")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/YvvIWmDBWdIUCMZj@FVFF77S0Q05N
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A new driver for the FSL MU widget that provides platform MSI
- An update for the Realtek RTL irqchip to use a DT binding that
actually describes the hardware
- A handful of DT updates, as well as minor code and spelling fixes
Link: https://lore.kernel.org/r/20221002125554.3902840-1-maz@kernel.org
|
|
The function thermal_zone_of_get_sensor_id() is no longer used
anywhere, remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220818082316.2717095-2-daniel.lezcano@linaro.org
|
|
build bot reports missing 'static inline' qualifiers in the header.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20221004040327.2034878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce (devm_)hw_register_mux_parent_data_table new API. We have
basic support for clk_register_mux using parent_data but we lack any API
to provide a custom parent_map. Add these 2 new API to correctly handle
these special configuration instead of using the generic
__(devm_)clk_hw_register_mux API.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220914144743.17369-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org [1]
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
|
|
Pull fscrypt updates from Eric Biggers:
"This release contains some implementation changes, but no new
features:
- Rework the implementation of the fscrypt filesystem-level keyring
to not be as tightly coupled to the keyrings subsystem. This
resolves several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is
a prerequisite for freeing up PG_error for other uses"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: work on block_devices instead of request_queues
fscrypt: stop holding extra request_queue references
fscrypt: stop using keyrings subsystem for fscrypt_master_key
fscrypt: stop using PG_error to track error status
fscrypt: remove fscrypt_set_test_dummy_encryption()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Fix a couple races found with a new torture test
- Improve errors when api functions are used incorrectly
- Improve tracing for lock requests from user space
- Fix use after free in recently added tracing cod.
- Small internal code cleanups
* tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: fix possible use after free if tracing
fs: dlm: const void resource name parameter
fs: dlm: LSFL_CB_DELAY only for kernel lockspaces
fs: dlm: remove DLM_LSFL_FS from uapi
fs: dlm: trace user space callbacks
fs: dlm: change ls_clear_proc_locks to spinlock
fs: dlm: remove dlm_del_ast prototype
fs: dlm: handle rcom in else if branch
fs: dlm: allow lockspaces have zero lvblen
fs: dlm: fix invalid derefence of sb_lvbptr
fs: dlm: handle -EINVAL as log_error()
fs: dlm: use __func__ for function name
fs: dlm: handle -EBUSY first in unlock validation
fs: dlm: handle -EBUSY first in lock arg validation
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: fix race in lowcomms
|
|
Pull nfsd updates from Chuck Lever:
"This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue that
occurs if a small RPC Call message arrives in an oversized RPC record.
This is only possible on a framed RPC transport such as TCP.
Because NFSD shares the receive and send buffers in one set of pages,
an oversized RPC record steals pages from the send buffer that will be
used to construct the RPC Reply message. NFSD must not assume that a
full-sized buffer is always available to it; otherwise, it will walk
off the end of the send buffer while constructing its reply.
In this release, we also introduce the ability for the server to wait
a moment for clients to return delegations before it responds with
NFS4ERR_DELAY. This saves a retransmit and a network round- trip when
a delegation recall is needed. This work will be built upon in future
releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources during
low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4 COMPOUND
that NFSD can handle is increased from 16 to 50. There are NFSv4
client implementations that need more than 16 to successfully perform
a mount operation that uses a pathname with many components"
* tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (53 commits)
nfsd: extra checks when freeing delegation stateids
nfsd: make nfsd4_run_cb a bool return function
nfsd: fix comments about spinlock handling with delegations
nfsd: only fill out return pointer on success in nfsd4_lookup_stateid
NFSD: fix use-after-free on source server when doing inter-server copy
NFSD: Cap rsize_bop result based on send buffer size
NFSD: Rename the fields in copy_stateid_t
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_file_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_reply_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define client_info_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define export_features_fops and supported_enctypes_fops
nfsd: use DEFINE_PROC_SHOW_ATTRIBUTE to define nfsd_proc_ops
NFSD: Pack struct nfsd4_compoundres
NFSD: Remove unused nfsd4_compoundargs::cachetype field
NFSD: Remove "inline" directives on op_rsize_bop helpers
NFSD: Clean up nfs4svc_encode_compoundres()
SUNRPC: Fix typo in xdr_buf_subsegment's kdoc comment
NFSD: Clean up WRITE arg decoders
NFSD: Use xdr_inline_decode() to decode NFSv3 symlinks
NFSD: Refactor common code out of dirlist helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs acl updates from Christian Brauner:
"These are general fixes and preparatory changes related to the ongoing
posix acl rework. The actual rework where we build a type safe posix
acl api wasn't ready for this merge window but we're hopeful for the
next merge window.
General fixes:
- Some filesystems like 9p and cifs have to implement custom posix
acl handlers because they require access to the dentry in order to
set and get posix acls while the set and get inode operations
currently don't. But the ntfs3 filesystem has no such requirement
and thus implemented custom posix acl xattr handlers when it really
didn't have to. So this pr contains patch that just implements set
and get inode operations for ntfs3 and switches it to rely on the
generic posix acl xattr handlers. (We would've appreciated reviews
from the ntfs3 maintainers but we didn't get any. But hey, if we
really broke it we'll fix it. But fstests for ntfs3 said it's
fine.)
- The posix_acl_fix_xattr_common() helper has been adapted so it can
be used by a few more callers and avoiding open-coding the same
checks over and over.
Other than the two general fixes this series introduces a new helper
vfs_set_acl_prepare(). The reason for this helper is so that we can
mitigate one of the source that change {g,u}id values directly in the
uapi struct. With the vfs_set_acl_prepare() helper we can move the
idmapped mount fixup into the generic posix acl set handler.
The advantage of this is that it allows us to remove the
posix_acl_setxattr_idmapped_mnt() helper which so far we had to call
in vfs_setxattr() to account for idmapped mounts. While semantically
correct the problem with this approach was that we had to keep the
value parameter of the generic vfs_setxattr() call as non-const. This
is rectified in this series.
Ultimately, we will get rid of all the extreme kludges and type
unsafety once we have merged the posix api - hopefully during the next
merge window - built solely around get and set inode operations. Which
incidentally will also improve handling of posix acls in security and
especially in integrity modesl. While this will come with temporarily
having two inode operation for posix acls that is nothing compared to
the problems we have right now and so well worth it. We'll end up with
something that we can actually reason about instead of needing to
write novels to explain what's going on"
* tag 'fs.acl.rework.prep.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
xattr: always us is_posix_acl_xattr() helper
acl: fix the comments of posix_acl_xattr_set
xattr: constify value argument in vfs_setxattr()
ovl: use vfs_set_acl_prepare()
acl: move idmapping handling into posix_acl_xattr_set()
acl: add vfs_set_acl_prepare()
acl: return EOPNOTSUPP in posix_acl_fix_xattr_common()
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"Seven patches for the LSM layer and we've got a mix of trivial and
significant patches. Highlights below, starting with the smaller bits
first so they don't get lost in the discussion of the larger items:
- Remove some redundant NULL pointer checks in the common LSM audit
code.
- Ratelimit the lockdown LSM's access denial messages.
With this change there is a chance that the last visible lockdown
message on the console is outdated/old, but it does help preserve
the initial series of lockdown denials that started the denial
message flood and my gut feeling is that these might be the more
valuable messages.
- Open userfaultfds as readonly instead of read/write.
While this code obviously lives outside the LSM, it does have a
noticeable impact on the LSMs with Ondrej explaining the situation
in the commit description. It is worth noting that this patch
languished on the VFS list for over a year without any comments
(objections or otherwise) so I took the liberty of pulling it into
the LSM tree after giving fair notice. It has been in linux-next
since the end of August without any noticeable problems.
- Add a LSM hook for user namespace creation, with implementations
for both the BPF LSM and SELinux.
Even though the changes are fairly small, this is the bulk of the
diffstat as we are also including BPF LSM selftests for the new
hook.
It's also the most contentious of the changes in this pull request
with Eric Biederman NACK'ing the LSM hook multiple times during its
development and discussion upstream. While I've never taken NACK's
lightly, I'm sending these patches to you because it is my belief
that they are of good quality, satisfy a long-standing need of
users and distros, and are in keeping with the existing nature of
the LSM layer and the Linux Kernel as a whole.
The patches in implement a LSM hook for user namespace creation
that allows for a granular approach, configurable at runtime, which
enables both monitoring and control of user namespaces. The general
consensus has been that this is far preferable to the other
solutions that have been adopted downstream including outright
removal from the kernel, disabling via system wide sysctls, or
various other out-of-tree mechanisms that users have been forced to
adopt since we haven't been able to provide them an upstream
solution for their requests. Eric has been steadfast in his
objections to this LSM hook, explaining that any restrictions on
the user namespace could have significant impact on userspace.
While there is the possibility of impacting userspace, it is
important to note that this solution only impacts userspace when it
is requested based on the runtime configuration supplied by the
distro/admin/user. Frederick (the pathset author), the LSM/security
community, and myself have tried to work with Eric during
development of this patchset to find a mutually acceptable
solution, but Eric's approach and unwillingness to engage in a
meaningful way have made this impossible. I have CC'd Eric directly
on this pull request so he has a chance to provide his side of the
story; there have been no objections outside of Eric's"
* tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: ratelimit denial messages
userfaultfd: open userfaultfds with O_RDONLY
selinux: Implement userns_create hook
selftests/bpf: Add tests verifying bpf lsm userns_create hook
bpf-lsm: Make bpf_lsm_userns_create() sleepable
security, lsm: Introduce security_create_user_ns()
lsm: clean up redundant NULL pointer check
|
|
Merge in the left-over fixes before the net-next pull-request.
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear")
9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc")
https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/
kernel/bpf/helpers.c
8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF")
5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF")
8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The _SLOW designation wasn't really descriptive of anything. This is
meant to be called from process context when it's possible to sleep. So
name this more aptly _SLEEPABLE, which better fits its intended use.
Fixes: 62c07983bef9 ("once: add DO_ONCE_SLOW() for sleepable contexts")
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221003181413.1221968-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
