| Age | Commit message (Collapse) | Author |
|---|
|
Provide a flag whereby a filesystem may request that cifs_perform_write()
perform write-through caching. This involves putting pages directly into
writeback rather than dirty and attaching them to a write operation as we
go.
Further, the writes being made are limited to the byte range being written
rather than whole folios being written. This can be used by cifs, for
example, to deal with strict byte-range locking.
This can't be used with content encryption as that may require expansion of
the write RPC beyond the write being made.
This doesn't affect writes via mmap - those are written back in the normal
way; similarly failed writethrough writes are marked dirty and left to
writeback to retry. Another option would be to simply invalidate them, but
the contents can be simultaneously accessed by read() and through mmap.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a launder_folio implementation for netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide an implementation of writepages for network filesystems to delegate
to.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Make netfslib pass the maximum length to the ->prepare_write() op to tell
the cache how much it can expand the length of a write to. This allows a
write to the server at the end of a file to be limited to a few bytes
whilst writing an entire block to the cache (something required by direct
I/O).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a top-level-ish function that can be pointed to directly by
->read_iter file op.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide an entry point to delegate a filesystem's ->page_mkwrite() to.
This checks for conflicting writes, then attached any netfs-specific group
marking (e.g. ceph snap) to the page to be considered dirty.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Institute a netfs write helper, netfs_file_write_iter(), to be pointed at
by the network filesystem ->write_iter() call. Make it handled buffered
writes by calling the previously defined netfs_perform_write() to copy the
source data into the pagecache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Implement support for unbuffered writes and direct I/O writes. If the
write is misaligned with respect to the fscrypt block size, then RMW cycles
are performed if necessary. DIO writes are a special case of unbuffered
writes with extra restriction imposed, such as block size alignment
requirements.
Also provide a field that can tell the code to add some extra space onto
the bounce buffer for use by the filesystem in the case of a
content-encrypted file.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Implement support for unbuffered and DIO reads in the netfs library,
utilising the existing read helper code to do block splitting and
individual queuing. The code also handles extraction of the destination
buffer from the supplied iterator, allowing async unbuffered reads to take
place.
The read will be split up according to the rsize setting and, if supplied,
the ->clamp_length() method. Note that the next subrequest will be issued
as soon as issue_op returns, without waiting for previous ones to finish.
The network filesystem needs to pause or handle queuing them if it doesn't
want to fire them all at the server simultaneously.
Once all the subrequests have finished, the state will be assessed and the
amount of data to be indicated as having being obtained will be
determined. As the subrequests may finish in any order, if an intermediate
subrequest is short, any further subrequests may be copied into the buffer
and then abandoned.
In the future, this will also take care of doing an unbuffered read from
encrypted content, with the decryption being done by the library.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a netfs write helper, netfs_perform_write() to buffer data to be
written in the pagecache and mark the modified folios dirty.
It will perform "streaming writes" for folios that aren't currently
resident, if possible, storing data in partially modified folios that are
marked dirty, but not uptodate. It will also tag pages as belonging to
fs-specific write groups if so directed by the filesystem.
This is derived from generic_perform_write(), but doesn't use
->write_begin() and ->write_end(), having that logic rolled in instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Dispatch one or more write reqeusts to process a writeback slice, where a
slice is tailored more to logical block divisions within the file (such as
crypto blocks, an object layout or cache granules) than the protocol RPC
maximum capacity.
The dispatch doesn't happen until throttling allows, at which point the
entire writeback slice is processed and queued. A slice may be written to
multiple destinations (one or more servers and the local cache) and the
writes to each destination might be split up along different lines.
The writeback slice holds the required folios pinned. An iov_iter is
provided in netfs_write_request that describes the buffer to be used. This
may be part of the pagecache, may have auxiliary padding pages attached or
may be a bounce buffer resulting from crypto or compression. Consequently,
the filesystem must not twiddle the folio markings directly.
The following API is available to the filesystem:
(1) The ->create_write_requests() method is called to ask the filesystem
to create the requests it needs. This is passed the writeback slice
to be processed.
(2) The filesystem should then call netfs_create_write_request() to create
the requests it needs.
(3) Once a request is initialised, netfs_queue_write_request() can be
called to dispatch it asynchronously, if not completed immediately.
(4) netfs_write_request_completed() should be called to note the
completion of a request.
(5) netfs_get_write_request() and netfs_put_write_request() are provided
to refcount a request. These take constants from the netfs_wreq_trace
enum for logging into ftrace.
(6) The ->free_write_request is method is called to ask the filesystem to
clean up a request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Prepare to use folio->private to hold information write grouping and
streaming write. These are implemented in the same commit as they both
make use of folio->private and will be both checked at the same time in
several places.
"Write grouping" involves ordering the writeback of groups of writes, such
as is needed for ceph snaps. A group is represented by a
filesystem-supplied object which must contain a netfs_group struct. This
contains just a refcount and a pointer to a destructor.
"Streaming write" is the storage of data in folios that are marked dirty,
but not uptodate, to avoid unnecessary reads of data. This is represented
by a netfs_folio struct. This contains the offset and length of the
modified region plus the otherwise displaced write grouping pointer.
The way folio->private is multiplexed is:
(1) If private is NULL then neither is in operation on a dirty folio.
(2) If private is set, with bit 0 clear, then this points to a group.
(3) If private is set, with bit 0 set, then this points to a netfs_folio
struct (with bit 0 AND'ed out).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a hook for netfslib's write helpers to call to tell the network
filesystem that it should update its i_size.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Modify the netfs_io_request struct to act as a point around which writes
can be coordinated. It represents and pins a range of pages that need
writing and a list of regions of dirty data in that range of pages.
If RMW is required, the original data can be downloaded into the bounce
buffer, decrypted if necessary, the modifications made, then the modified
data can be reencrypted/recompressed and sent back to the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Limit a subrequest to a maximum size and/or a maximum number of contiguous
physical regions. This permits, for instance, an subreq's iterator to be
limited to the number of DMA'able segments that a large RDMA request can
handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a function to work out how much of an ITER_BVEC or ITER_XARRAY iterator
we can use in a pagecount-limited and size-limited span. This will be
used, for example, to limit the number of segments in a subrequest to the
maximum number of elements that an RDMA transfer can handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide tools to create a buffer in an xarray, with a function to add new
folios with a mark. This will be used to create bounce buffer and can be
used more easily to create a list of folios the span of which would require
more than a page's worth of bio_vec structs.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a bvec array pointer and an iterator to netfs_io_request for either
holding a copy of a DIO iterator or a list of all the bits of buffer
pointed to by a DIO iterator.
There are two problems: Firstly, if an iovec-class iov_iter is passed to
->read_iter() or ->write_iter(), this cannot be passed directly to
kernel_sendmsg() or kernel_recvmsg() as that may cause locking recursion if
a fault is generated, so we need to keep track of the pages involved
separately.
Secondly, if the I/O is asynchronous, we must copy the iov_iter describing
the buffer before returning to the caller as it may be immediately
deallocated.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Give BLK_DEF_MAX_SECTORS a _CAP postfix and document what it is used for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We really only need types.h, list.h is big.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.
This helps us kill the dependency on preempt.h in sched.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Linux 6.7-rc7
|
|
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Remove the unused 'node' member. It got replaced by device_driver chaining
more than 20 years ago in commit 4b4a837f2b57 ("PCI: start to use common
fields of struct device_driver more...") of the history.git tree.
Link: https://lore.kernel.org/r/20231220133505.8798-1-minipli@grsecurity.net
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
The System EID (SEID) is an internal EID that is used by the SMCv2
software stack that has a predefined and constant value representing
the s390 physical machine that the OS is executing on. So it should
be managed by SMC stack instead of ISM driver and be consistent for
all ISMv2 device (including virtual ISM devices) on s390 architecture.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
submit_bio_noacct allows completely invalid operations, or operations
that are not supported in the bio path. Extent the existing switch
statement to rejcect all invalid types.
Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the
middle of the zone management operations and the switch statement can
follow the numerical order of the operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the @of_xlate: lines to prevent the kernel-doc warning:
include/linux/iio/iio.h:534: warning: Excess struct member 'of_xlate' description in 'iio_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/r/20231223050556.13948-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add three iov_iter structs:
(1) Add an iov_iter (->iter) to the I/O request to describe the
unencrypted-side buffer.
(2) Add an iov_iter (->io_iter) to the I/O request to describe the
encrypted-side I/O buffer. This may be a different size to the buffer
in (1).
(3) Add an iov_iter (->io_iter) to the I/O subrequest to describe the part
of the I/O buffer for that subrequest.
This will allow future patches to point to a bounce buffer instead for
purposes of handling oversize writes, decryption (where we want to save the
encrypted data to the cache) and decompression.
These iov_iters persist for the lifetime of the (sub)request, and so can be
accessed multiple times without worrying about them being deallocated upon
return to the caller.
The network filesystem must appropriately advance the iterator before
terminating the request.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Borrow NFS's direct-vs-buffered I/O locking into netfslib. Similar code is
also used in ceph.
Modify it to have the correct checker annotations for i_rwsem lock
acquisition/release and to return -ERESTARTSYS if waits are interrupted.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide default invalidate_folio and release_folio calls. These will need
to interact with invalidation correctly at some point. They will be needed
if netfslib is to make use of folio->private for its own purposes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a ->free_subrequest() op so that the netfs can clean up data attached
to a subrequest.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Allow the network filesystem to specify extra space to be allocated on the
end of the io (sub)request. This allows cifs, for example, to use this
space rather than allocating its own cifs_readdata struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add a procfile, /proc/fs/netfs/requests, to list in-progress netfslib I/O
requests.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.
Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.
Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Rename /proc/fs/fscache to "netfs" and make a symlink from fscache to that.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
|
|
Remove ->begin_cache_operation() in favour of just calling fscache directly.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
With UTIL_EST_FASTUP now being permanent, we can take advantage of the
fact that the ewma jumps directly to a higher utilization at dequeue to
simplify util_est and remove the enqueued field.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20231201161652.1241695-3-vincent.guittot@linaro.org
|
|
Use the new capacity_ref_freq() method to set the ratio that is used by AMU for
computing the arch_scale_freq_capacity().
This helps to keep everything aligned using the same reference for
computing CPUs capacity.
The default value of the ratio (stored in per_cpu(arch_max_freq_scale))
ensures that arch_scale_freq_capacity() returns max capacity until it is
set to its correct value with the cpu capacity and capacity_ref_freq().
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231211104855.558096-8-vincent.guittot@linaro.org
|
|
The last item of a performance domain is not always the performance point
that has been used to compute CPU's capacity. This can lead to different
target frequency compared with other part of the system like schedutil and
would result in wrong energy estimation.
A new arch_scale_freq_ref() is available to return a fixed and coherent
frequency reference that can be used when computing the CPU's frequency
for an level of utilization. Use this function to get this reference
frequency.
Energy model is never used without defining arch_scale_freq_ref() but
can be compiled. Define a default arch_scale_freq_ref() returning 0
in such case.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-5-vincent.guittot@linaro.org
|
|
cpuinfo.max_freq can change at runtime because of boost as an example. This
implies that the value could be different from the frequency that has been
used to compute the capacity of a CPU.
The new arch_scale_freq_ref() returns a fixed and coherent frequency
that can be used to compute the capacity for a given frequency.
[ Also fix a arch_set_freq_scale() newline style wart in <linux/cpufreq.h>. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20231211104855.558096-3-vincent.guittot@linaro.org
|
|
Create a new method to get a unique and fixed max frequency. Currently
cpuinfo.max_freq or the highest (or last) state of performance domain are
used as the max frequency when computing the frequency for a level of
utilization, but:
- cpuinfo_max_freq can change at runtime. boost is one example of
such change.
- cpuinfo.max_freq and last item of the PD can be different leading to
different results between cpufreq and energy model.
We need to save the reference frequency that has been used when computing
the CPUs capacity and use this fixed and coherent value to convert between
frequency and CPU's capacity.
In fact, we already save the frequency that has been used when computing
the capacity of each CPU. We extend the precision to save kHz instead of
MHz currently and we modify the type to be aligned with other variables
used when converting frequency to capacity and the other way.
[ mingo: Minor edits. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-2-vincent.guittot@linaro.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Assert that the file object is allocated in a backing_file container
so that file_user_path() could be used to display the user path and
not the backing file's path in /proc/<pid>/maps.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
There is not much in those helpers, but it makes sense to have them
logically next to the backing_file_{read,write}_iter() helpers as they
may grow more common logic in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Overlayfs submits files io to backing files on other filesystems.
Factor out some common helpers to perform io to backing files, into
fs/backing-file.c.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpeguhmZbjP3JLqtUy0AdWaHOkAPWeP827BBWwRFEAUgnUcQ@mail.gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
