summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2016-03-02nohz: Use enum code for tick stop failure tracing messageFrederic Weisbecker
It makes nohz tracing more lightweight, standard and easier to parse. Examples: user_loop-2904 [007] d..1 517.701126: tick_stop: success=1 dependency=NONE user_loop-2904 [007] dn.1 518.021181: tick_stop: success=0 dependency=SCHED posix_timers-6142 [007] d..1 1739.027400: tick_stop: success=0 dependency=POSIX_TIMER user_loop-5463 [007] dN.1 1185.931939: tick_stop: success=0 dependency=PERF_EVENTS Suggested-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2016-03-02nohz: New tick dependency maskFrederic Weisbecker
The tick dependency is evaluated on every IRQ and context switch. This consists is a batch of checks which determine whether it is safe to stop the tick or not. These checks are often split in many details: posix cpu timers, scheduler, sched clock, perf events.... each of which are made of smaller details: posix cpu timer involves checking process wide timers then thread wide timers. Perf involves checking freq events then more per cpu details. Checking these informations asynchronously every time we update the full dynticks state bring avoidable overhead and a messy layout. Let's introduce instead tick dependency masks: one for system wide dependency (unstable sched clock, freq based perf events), one for CPU wide dependency (sched, throttling perf events), and task/signal level dependencies (posix cpu timers). The subsystems are responsible for setting and clearing their dependency through a set of APIs that will take care of concurrent dependency mask modifications and kick targets to restart the relevant CPU tick whenever needed. This new dependency engine stays beside the old one until all subsystems having a tick dependency are converted to it. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2016-03-02virtio: Add improved queue allocation APIAndy Lutomirski
This leaves vring_new_virtqueue alone for compatbility, but it adds two new improved APIs: vring_create_virtqueue: Creates a virtqueue backed by automatically allocated coherent memory. (Some day it this could be extended to support non-coherent memory, too, if there ends up being a platform on which it's worthwhile.) __vring_new_virtqueue: Creates a virtqueue with a manually-specified layout. This should allow mic_virtio to work much more cleanly. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-02dma: Provide simple noop dma opsChristian Borntraeger
We are going to require dma_ops for several common drivers, even for systems that do have an identity mapping. Lets provide some minimal no-op dma_ops that can be used for that purpose. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-02regulator: helper: Add helper to configure active-discharge using regmapLaxman Dewangan
Add helper function to set the state of active-discharge of regulator using regmap. The HW regulator driver can directly use this by providing the necessary information in the regulator descriptor. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02regulator: core: Add support for active-discharge configurationLaxman Dewangan
Add support to enable/disable active discharge of regulator via machine constraints. This configuration is done when setting machine constraint during regulator register and if regulator driver implemented the callback ops. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-01Drivers: hv: util: Pass the channel information during the init callK. Y. Srinivasan
Pass the channel information to the util drivers that need to defer reading the channel while they are processing a request. This would address the following issue reported by Vitaly: Commit 3cace4a61610 ("Drivers: hv: utils: run polling callback always in interrupt context") removed direct *_transaction.state = HVUTIL_READY assignments from *_handle_handshake() functions introducing the following race: if a userspace daemon connects before we get first non-negotiation request from the server hv_poll_channel() won't set transaction state to HVUTIL_READY as (!channel) condition will fail, we set it to non-NULL on the first real request from the server. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01misc: at24: replace memory_accessor with nvmem_device_readAndrew Lunn
Now that the AT24 uses the NVMEM framework, replace the memory_accessor in the setup() callback with nvmem API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01eeprom: at25: Remove in kernel API for accessing the EEPROMAndrew Lunn
The setup() callback is not used by any in kernel code. Remove it. Any new code which requires access to the eeprom can use the NVMEM API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01nvmem: Add backwards compatibility support for older EEPROM drivers.Andrew Lunn
Older drivers made an 'eeprom' file available in the /sys device directory. Have the NVMEM core provide this to retain backwards compatibility. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01nvmem: Add flag to export NVMEM to root onlyAndrew Lunn
Legacy AT24, AT25 EEPROMs are exported in sys so that only root can read the contents. The EEPROMs may contain sensitive information. Add a flag so the provide can indicate that NVMEM should also restrict access to root only. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01Merge tag 'extcon-next-for-4.6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing Chanwoo writes: Update extcon for 4.6 Detailed description for patchset: 1. Add new EXTCON_CHG_USB_SDP type - SDP (Standard Downstream Port) USB Charging Port means the charging connector.a 2. Add the VBUS detection by using GPIO on extcon-palmas - Beaglex15 board uses the extcon-palmas driver But, beaglex15 board need the GPIO support for VBUS detection. 3. Fix the minor issue of extcon drivers
2016-03-01Merge 4.5-rc6 into char-misc-nextGreg Kroah-Hartman
We want the fixes in here, and others are sending us pull requests based on this kernel tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01Merge tag 'iio-for-4.6c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, features and cleanups for the 4.6 cycle. Good to see several new contributors in this set - and more generally a number of new 'faces' over this whole cycle. Staging movements * hmc5843 - out of staging. * periodic RTC trigger - driver dropped. This is an ancient driver (brings back some memories ;) that was always somewhat of a bodge. Originally there was a driver that never went into mainline that supported large numbers of periodict timers on the PXA270 via this route. Discussions to have a generic periodic timer subsystem never went anywhere. At the time RTC periodic interrupts were real - now they are emulated using high resolution timers so with the HRT driver this has become pointless. New device support * mpu6050 driver - Add support for the mpu6500. * TI tpl0102 potentiometer - new driver. * Vybrid SoC DAC - new driver. The ADC on this SoC has been supported for a while, this adds a separate driver for the DAC. New Features * hmc5844 - Attributes to configure the bias current (typically part of a self test) This could be done before via a somewhat obscure custom interface. This at least makes it easy to tell what is going on. - Document all custom attributes. * mpu6050 - Add support for calibration offset control and readback. * ms5611 - power regulator support. This is always one that gets added the first time someone has a board that needs it. Here it was needed, hence it was added. Cleanups / minor fixes * tree wide - clean up all the myriad different return values in response to a failure of i2c_check_functionality. After discussions everyone seemed happy wiht -EOPNOTSUPP which seems to describe the situation well. I encouraged a tree wide cleanup to set a good example in future for this. * core - Typos in the iio_event_spec documentation in iio.h * afe4403 - select REGMAP_SPI to avoid dependency issues - mark suspend/resume as __maybe_unused to avoid warnings * afe4404 - mark suspend/resume as __maybe_unused to avoid warnings * atlas-ph-sensor - switch the regmap cache type from linear to rbtree to gain reading of registers on initial startup. It's not immediately obvious, but regmap flat is meant for high performances cases so doesn't read these registers. - use regmap_bulk_read in one case where it was using i2c_smbus_read_i2c_block_data directly (unlike everything else that was through regmap). * ina2xx - stype cleanups (lots of them!) * isl29018 - Get the struct device back from regmap rather than storing another copy of it in the private data. This cleanup makes sense in a number of other drivers so patches may well follow. * mpu6050 - style cleanups (lots of them!) - improved return value handling - use usleep_range to avoid the usual issues with very short msleeps. - add some missing documentation. * ms5611 - use the probed device name for the device rather than the driver name. - select IIO_BUFFER to avoid dependency issues * palmas - drop IRQF_EARLY_RESUME as no longer needed after genirq changes.
2016-03-01Merge 4.5-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01Merge 4.5-rc6 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull d_inode/d_flags race fix from Al Viro. I love this fix. Not only does it fix the race in the dentry type handling, it entirely gets rid of the nasty and subtle memory ordering rules for d_type and d_inode, and replaces them with the basic dentry locking rules (sequence numbers under RCU, d_lock elsewhere). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use ->d_seq to get coherency between ->d_inode and ->d_flags
2016-03-01qed: Semantic refactoring of interrupt codeYuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net: remove skb_sender_cpu_clear()WANG Cong
After commit 52bd2d62ce67 ("net: better skb->sender_cpu and skb->napi_id cohabitation") skb_sender_cpu_clear() becomes empty and can be removed. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net/mlx5: Fix global UAR mappingMoshe Lazer
Avoid double mapping of io mapped memory, Device page may be mapped to non-cached(NC) or to write-combining(WC). The code before this fix tries to map it both to WC and NC contrary to what stated in Intel's software developer manual. Here we remove the global WC mapping of all UARS "dev->priv.bf_mapping", since UAR mapping should be decided per UAR (e.g we want different mappings for EQs, CQs vs QPs). Caller will now have to choose whether to map via write-combining API or not. mlx5e SQs will choose write-combining in order to perform BlueFlame writes. Fixes: 88a85f99e51f ('TX latency optimization to save DMA reads') Signed-off-by: Moshe Lazer <moshel@mellanox.com> Reviewed-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01net/mlx5: Make command timeout way shorterOr Gerlitz
The command timeout is terribly long, whole two hours. Make it 60s so if things do go wrong, the user gets feedback in relatively short time, so they can take corrective actions and/or investigate using tools and such. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01mlx4: Implement devlink interfaceJiri Pirko
Implement newly introduced devlink interface. Add devlink port instances for every port and set the port types accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v2->v3: -add dev param to devlink_register (api change) Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server send CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. This new API also aims each completion at a function that is specific to the WR's opcode. Thus the ctxt->wr_op field and the switch in process_context is replaced by a set of methods that handle each completion type. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. The server's rdma_stat_sq_poll and rdma_stat_sq_prod metrics are no longer updated. As a clean up, the cq_event_handler, the dto_tasklet, and all associated locking is removed, as they are no longer referenced or used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server receive CQsChuck Lever
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. svcrdma receive completions no longer use the dto_tasklet. Each polled Receive WC is now handled individually in soft IRQ context. The server transport's rdma_stat_rq_poll and rdma_stat_rq_prod metrics are no longer updated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Use correct XID in error repliesChuck Lever
When constructing an error reply, svc_rdma_xdr_encode_error() needs to view the client's request message so it can get the failing request's XID. svc_rdma_xdr_decode_req() is supposed to return a pointer to the client's request header. But if it fails to decode the client's message (and thus an error reply is needed) it does not return the pointer. The server then sends a bogus XID in the error reply. Instead, unconditionally generate the pointer to the client's header in svc_rdma_recvfrom(), and pass that pointer to both functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Make RDMA_ERROR messages workChuck Lever
Fix several issues with svc_rdma_send_error(): - Post a receive buffer to replace the one that was consumed by the incoming request - Posting a send should use DMA_TO_DEVICE, not DMA_FROM_DEVICE - No need to put_page _and_ free pages in svc_rdma_put_context - Make sure the sge is set up completely in case the error path goes through svc_rdma_unmap_dma() - Replace the use of ENOSYS, which has a reserved meaning Related fixes in svc_rdma_recvfrom(): - Don't leak the ctxt associated with the incoming request - Don't close the connection after sending an error reply - Let svc_rdma_send_error() figure out the right header error code As a last clean up, move svc_rdma_send_error() to svc_rdma_sendto.c with other similar functions. There is some common logic in these functions that could someday be combined to reduce code duplication. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01rpcrdma: Add RPCRDMA_HDRLEN_ERRChuck Lever
Error headers are shorter than either RDMA_MSG or RDMA_NOMSG. Since HDRLEN_MIN is already used in several other places that would be annoying to change, add RPCRDMA_HDRLEN_ERR for the one or two spots where the shorter length is needed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: svc_rdma_post_recv() should close connection on errorChuck Lever
Clean up: Most svc_rdma_post_recv() call sites close the transport connection when a receive cannot be posted. Wrap that in a common helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com> Tested-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01nfsd: Lower NFSv4.1 callback message size limitChuck Lever
The maximum size of a backchannel message on RPC-over-RDMA depends on the connection's inline threshold. Today that threshold is typically 1024 bytes, making the maximum message size 996 bytes. The Linux server's CREATE_SESSION operation checks that the size of callback Calls can be as large as 1044 bytes, to accommodate RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the true message size maximum of 996 bytes. But the server's backchannel currently does not support RPCSEC_GSS. The actual maximum size it needs is much smaller. It is safe to reduce the limit to enable NFSv4.1 on RDMA backchannel operation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01svcrdma: Do not send Write chunk XDR pad with inline contentChuck Lever
The NFS server's XDR encoders adds an XDR pad for content in the xdr_buf page list at the beginning of the xdr_buf's tail buffer. On RDMA transports, Write chunks are sent separately and without an XDR pad. If a Write chunk is being sent, strip off the pad in the tail buffer so that inline content following the Write chunk remains XDR-aligned when it is sent to the client. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=294 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01netdev: introduce ndo_set_rx_headroomPaolo Abeni
This method allows the controlling device (i.e. the bridge) to specify additional headroom to be allocated for skb head on frame reception. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01rcu: Make CPU_DYING_IDLE an explicit callThomas Gleixner
Make the RCU CPU_DYING_IDLE callback an explicit function call, so it gets invoked at the proper place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.870167933@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Make wait for dead cpu completion basedThomas Gleixner
Kill the busy spinning on the control side and just wait for the hotplugged cpu to tell that it reached the dead state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.776157858@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Let upcoming cpu bring itself fully upThomas Gleixner
Let the upcoming cpu kick the hotplug thread and let itself complete the bringup. That way the controll side can just wait for the completion or later when we made the hotplug machinery async not care at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.697655464@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01arch/hotplug: Call into idle with a proper stateThomas Gleixner
Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Move online calls to hotplugged cpuThomas Gleixner
Let the hotplugged cpu invoke the setup/teardown callbacks (CPU_ONLINE/CPU_DOWN_PREPARE) itself. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.536364371@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Unpark smpboot threads from the state machineThomas Gleixner
Handle the smpboot threads in the state machine. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.295777684@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Move scheduler cpu_online notifier to hotplug coreThomas Gleixner
Move the scheduler cpu online notifier part to the hotplug core. This is anyway the highest priority callback and we need that functionality right now for the next changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.200791046@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Implement setup/removal interfaceThomas Gleixner
Implement function which allow to setup/remove hotplug state callbacks. The default behaviour for setup is to call the startup function for this state for (or on) all cpus which have a hotplug state >= the installed state. The default behaviour for removal is to call the teardown function for this state for (or on) all cpus which have a hotplug state >= the installed state. This includes rollback to the previous state in case of failure. A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug callback pair. This is for drivers which have no dependencies to avoid that we need to allocate CPUHP states for each of them For both setup and remove helper functions are provided, which prevent the core to issue the callbacks. This simplifies the conversion of existing hotplug notifiers. [ Dynamic registering implemented by Sebastian Siewior ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.103464877@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Convert the hotplugged cpu work to a state machineThomas Gleixner
Move the functions which need to run on the hotplugged processor into a state machine array and let the code iterate through these functions. In a later state, this will grow synchronization points between the control processor and the hotplugged processor, so we can move the various architecture implementations of the synchronizations to the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182340.770651526@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Convert to a state machine for the control processorThomas Gleixner
Move the split out steps into a callback array and let the cpu_up/down code iterate through the array functions. For now most of the callbacks are asymmetric to resemble the current hotplug maze. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182340.671816690@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01cpu/hotplug: Restructure FROZEN state handlingThomas Gleixner
There are only a few callbacks which really care about FROZEN vs. !FROZEN. No need to have extra states for this. Publish the frozen state in an extra variable which is updated under the hotplug lock and let the users interested deal with it w/o imposing that extra state checks on everyone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182340.334912357@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01IB/mlx5: Add memory windows allocation supportMatan Barak
This patch adds user-space support for memory windows allocation and deallocation. It also exposes the supported types via query_device_caps verb. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Tested-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01net/mlx5: Refactor mlx5_core_mr to mkeyMatan Barak
Mlx5's mkey mechanism is also used for memory windows. The current code base uses MR (memory region) naming, which is inaccurate. Changing MR to mkey in order to represent its different usages more accurately. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01IB/mlx5: Add support for setting source QP numberHaggai Eran
In order to create multiple GSI QPs, we need to set the source QP number to one on all these QPs. Add the necessary definitions and infrastructure to do that. Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01IB/mlx5: Define interface bits for IPoIB offloadsErez Shitrit
The HW can supply several offloads for UD QP, added offloads for checksumming for both TX and RX and LSO for TX. Two new bits were added in order to expose and enable these offloads: 1. HCA capability bit: declares the support for IPoIB basic offloads. 2. QPC bit which will be used in the QP creation flow, which set these abilities in the QP. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01IB/mlx5: Modify MAD reading counters method to use counter registersMeny Yossefi
Modify mlx5_ib_process_mad to use PPCNT and query_vport commands instead of MAD_IFC, as MAD_IFC is deprecated on new firmware versions (and doesn't support RoCE anyway). Traffic counters exist in both 32-bit and 64-bit forms. Declaring support of extended coutners results in traffic counters to be read in their 64-bit form only via the query_vport command. Error counters exist only in 32-bit form and read via PPCNT command. This commit also adds counters support in RoCE. Signed-off-by: Meny Yossefi <menyy@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01net/mlx5_core: Add helper function to read IB error countersMeny Yossefi
Added helper function to read IB standard error counters via the PPCNT register. The PPCNT register read command provides the 32-bit error counters of both IB/RoCE link layer and transport layer. Signed-off-by: Meny Yossefi <menyy@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01net/mlx5_core: Add helper function to read virtual port countersMeny Yossefi
Added helper function to read 64bit virtual port Infiniband traffic counters. Signed-off-by: Meny Yossefi <menyy@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 14:19:23 +0000