| Age | Commit message (Collapse) | Author |
|---|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test wmfw file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
current->state = TASK_INTERRUPTIBLE();
schedule();
deactivate_task()
dl_stop_server();
pick_next_task()
pick_next_task_fair()
sched_balance_newidle()
rq_unlock(this_rq)
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lkml.kernel.org/r/20241213032244.877029-1-vineeth@bitbyteword.org
|
|
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE)
is repeated across dozens of drivers and really wants a shorthand.
Add a macro which will count args and handle all possible number
from 2 to 5. Semantics:
skb_frag_dma_map(dev, frag) ->
__skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset) ->
__skb_frag_dma_map(dev, frag, offset, skb_frag_size(frag) - offset,
DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset, size) ->
__skb_frag_dma_map(dev, frag, offset, size, DMA_TO_DEVICE)
skb_frag_dma_map(dev, frag, offset, size, dir) ->
__skb_frag_dma_map(dev, frag, offset, size, dir)
No object code size changes for the existing callers. Users passing
less arguments also won't have bigger size comparing to the full
equivalent call.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-11-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.
Current release - fix to a fix:
- rtnetlink: fix error code in rtnl_newlink()
- tipc: fix NULL deref in cleanup_bearer()
Current release - regressions:
- ip: fix warning about invalid return from in ip_route_input_rcu()
Current release - new code bugs:
- udp: fix L4 hash after reconnect
- eth: lan969x: fix cyclic dependency between modules
- eth: bnxt_en: fix potential crash when dumping FW log coredump
Previous releases - regressions:
- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume
- splice: do not checksum AF_UNIX sockets
- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop
- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips
Previous releases - always broken:
- Bluetooth: improve setsockopt() handling of malformed user input
- eth: ocelot: fix PTP timestamping in presence of packet loss
- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"
* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...
|
|
header
Add definitions for contents of the OMNIA_CMD_LED_MODE and
OMNIA_CMD_LED_STATE commands to the global turris-omnia-mcu-interface.h
header.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-4-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move the command execution functions from the turris-omnia-mcu platform
driver private header to the global turris-omnia-mcu-interface.h header,
so that they can be used by the LED driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20241111100355.6978-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Make bio_iov_bvec_set() accept a pointer to const iov_iter, which means
that we can drop the undesirable casting to struct iov_iter pointer in
blk_rq_map_user_bvec().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241202115727.2320401-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
Both bonding and team driver have logic to derive the base feature
flags before iterating over their slave devices to refine the set
via netdev_increment_features().
Add a small helper netdev_base_features() so this can be reused
instead of having it open-coded multiple times.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is new API which caters to the following requirements:
- Pack or unpack a large number of fields to/from a buffer with a small
code footprint. The current alternative is to open-code a large number
of calls to pack() and unpack(), or to use packing() to reduce that
number to half. But packing() is not const-correct.
- Use unpacked numbers stored in variables smaller than u64. This
reduces the rodata footprint of the stored field arrays.
- Perform error checking at compile time, rather than runtime, and return
void from the API functions. Because the C preprocessor can't generate
variable length code (loops), this is a bit tricky to do with macros.
To handle this, implement macros which sanity check the packed field
definitions based on their size. Finally, a single macro with a chain of
__builtin_choose_expr() is used to select the appropriate macros. We
enforce the use of ascending or descending order to avoid O(N^2) scaling
when checking for overlap. Note that the macros are written with care to
ensure that the compilers can correctly evaluate the resulting code at
compile time. In particular, care was taken with avoiding too many nested
statement expressions. Nested statement expressions trip up some
compilers, especially when passing down variables created in previous
statement expressions.
There are two key design choices intended to keep the overall macro code
size small. First, the definition of each CHECK_PACKED_FIELDS_N macro is
implemented recursively, by calling the N-1 macro. This avoids needing
the code to repeat multiple times.
Second, the CHECK_PACKED_FIELD macro enforces that the fields in the
array are sorted in order. This allows checking for overlap only with
neighboring fields, rather than the general overlap case where each field
would need to be checked against other fields.
The overlap checks use the first two fields to determine the order of the
remaining fields, thus allowing either ascending or descending order.
This enables drivers the flexibility to keep the fields ordered in which
ever order most naturally fits their hardware design and its associated
documentation.
The CHECK_PACKED_FIELDS macro is directly called from within pack_fields
and unpack_fields, ensuring that all drivers using the API receive the
benefits of the compile-time checks. Users do not need to directly call
any of the macros directly.
The CHECK_PACKED_FIELDS and its helper macros CHECK_PACKED_FIELDS_(0..50)
are generated using a simple C program in scripts/gen_packed_field_checks.c
This program can be compiled on demand and executed to generate the
macro code in include/linux/packing.h. This will aid in the event that a
driver needs more than 50 fields. The generator can be updated with a new
size, and used to update the packing.h header file. In practice, the ice
driver will need to support 27 fields, and the sja1105 driver will need
to support 0 fields. This on-demand generation avoids the need to modify
Kbuild. We do not anticipate the maximum number of fields to grow very
often.
- Reduced rodata footprint for the storage of the packed field arrays.
To that end, we have struct packed_field_u8 and packed_field_u16, which
define the fields with the associated type. More can be added as
needed (unlikely for now). On these types, the same generic pack_fields()
and unpack_fields() API can be used, thanks to the new C11 _Generic()
selection feature, which can call pack_fields_u8() or pack_fields_16(),
depending on the type of the "fields" array - a simplistic form of
polymorphism. It is evaluated at compile time which function will actually
be called.
Over time, packing() is expected to be completely replaced either with
pack() or with pack_fields().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-3-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consolidate the machine_kexec_mask_interrupts implementation into a common
function located in a new file: kernel/irq/kexec.c. This removes duplicate
implementations from architecture-specific files in arch/arm, arch/arm64,
arch/powerpc, and arch/riscv, reducing code duplication and improving
maintainability.
The new implementation retains architecture-specific behavior for
CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented
for ARM64. When enabled (currently for ARM64), it clears the active state
of interrupts forwarded to virtual machines (VMs) before handling other
interrupt masking operations.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com
|
|
Commit 2a010c412853 ("fs: don't block i_writecount during exec") removed
the legacy behavior of getting ETXTBSY on attempt to open and executable
file for write while it is being executed.
This commit was reverted because an application that depends on this
legacy behavior was broken by the change.
We need to allow HSM writing into executable files while executed to
fill their content on-the-fly.
To that end, disable the ETXTBSY legacy behavior for files that are
watched by pre-content events.
This change is not expected to cause regressions with existing systems
which do not have any pre-content event listeners.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241128142532.465176-1-amir73il@gmail.com
|
|
FS_PRE_ACCESS will be generated on page fault depending on the faulting
method. This pre-content event is meant to be used by hierarchical storage
managers that want to fill in the file content on first read access.
Export a simple helper that file systems that have their own ->fault()
will use, and have a more complicated helper to be do fancy things in
filemap_fault.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/aa56c50ce81b1fd18d7f5d71dd2dfced5eba9687.1731684329.git.josef@toxicpanda.com
|
|
Mark the list of registers passed into regmap_multi_reg_read() as a
pointer to const. This allows the caller to define the register list
as const data.
This requires making the same change to _regmap_bulk_read(), which is
called by regmap_multi_reg_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241211133558.884669-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During concurrent append writes to XFS filesystem, zero padding data
may appear in the file after power failure. This happens due to imprecise
disk size updates when handling write completion.
Consider this scenario with concurrent append writes same file:
Thread 1: Thread 2:
------------ -----------
write [A, A+B]
update inode size to A+B
submit I/O [A, A+BS]
write [A+B, A+B+C]
update inode size to A+B+C
<I/O completes, updates disk size to min(A+B+C, A+BS)>
<power failure>
After reboot:
1) with A+B+C < A+BS, the file has zero padding in range [A+B, A+B+C]
|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|
^ ^ ^
A A+B A+B+C
(EOF)
2) with A+B+C > A+BS, the file has zero padding in range [A+B, A+BS]
|< Block Size (BS) >|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|00000000000000000000000000000000|
^ ^ ^ ^
A A+B A+BS A+B+C
(EOF)
D = Valid Data
0 = Zero Padding
The issue stems from disk size being set to min(io_offset + io_size,
inode->i_size) at I/O completion. Since io_offset+io_size is block
size granularity, it may exceed the actual valid file data size. In
the case of concurrent append writes, inode->i_size may be larger
than the actual range of valid file data written to disk, leading to
inaccurate disk size updates.
This patch modifies the meaning of io_size to represent the size of
valid data within EOF in an ioend. If the ioend spans beyond i_size,
io_size will be trimmed to provide the file with more accurate size
information. This is particularly useful for on-disk size updates
at completion time.
After this change, ioends that span i_size will not grow or merge with
other ioends in concurrent scenarios. However, these cases that need
growth/merging rarely occur and it seems no noticeable performance impact.
Although rounding up io_size could enable ioend growth/merging in these
scenarios, we decided to keep the code simple after discussion [1].
Another benefit is that it makes the xfs_ioend_is_append() check more
accurate, which can reduce unnecessary end bio callbacks of xfs_end_bio()
in certain scenarios, such as repeated writes at the file tail without
extending the file size.
Link [1]: https://patchwork.kernel.org/project/xfs/patch/20241113091907.56937-1-leo.lilong@huawei.com
Fixes: ae259a9c8593 ("fs: introduce iomap infrastructure") # goes further back than this
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://lore.kernel.org/r/20241209114241.3725722-3-leo.lilong@huawei.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I chose to remove this field in a separate patch to ease
potential bisection, in case one ndo_fdb_dump() is still
using the old way (cb->args[2] instead of ctx->fdb_idx)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is the last netdev iterator still using net->dev_index_head[].
Convert to modern for_each_netdev_dump() for better scalability,
and use common patterns in our stack.
Following patch in this series removes the pad field
in struct ndo_fdb_dump_context.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtnl_fdb_dump() and various ndo_fdb_dump() helpers share
a hidden layout of cb->ctx.
Before switching rtnl_fdb_dump() to for_each_netdev_dump()
in the following patch, make this more explicit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241209100747.2269613-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
|
|
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation.
Reported-by: Nick Zavaritsky <mejedi@gmail.com>
Closes: https://lore.kernel.org/bpf/0498CA22-5779-4767-9C0C-A9515CEA711F@gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When two profile handlers don't agree on the current profile it's ambiguous
what to show to the legacy sysfs interface.
Add a "custom" profile string that userspace will be able to use the legacy
sysfs interface to distinguish this situation..
Additionally drivers can choose to use this to indicate that a user has
modified driver settings in a way that the platform profile advertised by
a driver is not accurate.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-17-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When registering a platform profile handler create a class device
that will allow changing a single platform profile handler.
The class and sysfs group are no longer needed when the platform profile
core is a module and unloaded, so remove them at that time as well.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-11-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The profile handler will be used to notify the appropriate class
devices.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
platform_profile_remove()
To allow registering and unregistering multiple platform handlers calls
to platform_profile_remove() will need to know which handler is to be
removed. Add an argument for this.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-5-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to let platform profile handlers manage platform profile
for their driver the core code will need a pointer to the device.
Add this to the structure and use it in the trivial driver cases.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-4-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In order to prepare for allowing multiple handlers, introduce
a name field that can be used to distinguish between different
handlers.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-2-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This isn't used outside this file. Hide the array in the C file.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241204194806.2665589-1-swboyd@chromium.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone reclaim processing of the dm-zoned device mapper uses
blkdev_issue_zeroout() to align the write pointer of a zone being used
for reclaiming another zone, to write the valid data blocks from the
zone being reclaimed at the same position relative to the zone start in
the reclaim target zone.
The first call to blkdev_issue_zeroout() will try to use hardware
offload using a REQ_OP_WRITE_ZEROES operation if the device reports a
non-zero max_write_zeroes_sectors queue limit. If this operation fails
because of the lack of hardware support, blkdev_issue_zeroout() falls
back to using a regular write operation with the zero-page as buffer.
Currently, such REQ_OP_WRITE_ZEROES failure is automatically handled by
the block layer zone write plugging code which will execute a report
zones operation to ensure that the write pointer of the target zone of
the failed operation has not changed and to "rewind" the zone write
pointer offset of the target zone as it was advanced when the write zero
operation was submitted. So the REQ_OP_WRITE_ZEROES failure does not
cause any issue and blkdev_issue_zeroout() works as expected.
However, since the automatic recovery of zone write pointers by the zone
write plugging code can potentially cause deadlocks with queue freeze
operations, a different recovery must be implemented in preparation for
the removal of zone write plugging report zones based recovery.
Do this by introducing the new function blk_zone_issue_zeroout(). This
function first calls blkdev_issue_zeroout() with the flag
BLKDEV_ZERO_NOFALLBACK to intercept failures on the first execution
which attempt to use the device hardware offload with the
REQ_OP_WRITE_ZEROES operation. If this attempt fails, a report zone
operation is issued to restore the zone write pointer offset of the
target zone to the correct position and blkdev_issue_zeroout() is called
again without the BLKDEV_ZERO_NOFALLBACK flag. The report zones
operation performing this recovery is implemented using the helper
function disk_zone_sync_wp_offset() which calls the gendisk report_zones
file operation with the callback disk_report_zones_cb(). This callback
updates the target write pointer offset of the target zone using the new
function disk_zone_wplug_sync_wp_offset().
dmz_reclaim_align_wp() is modified to change its call to
blkdev_issue_zeroout() to a call to blk_zone_issue_zeroout() without any
other change needed as the two functions are functionnally equivalent.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241209122357.47838-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The rseq uapi requires cooperation between users of the rseq fields
to ensure that all libraries and applications using rseq within a
process do not interfere with each other.
This is especially important for fields which are meant to be read-only
from user-space, as documented in uapi/linux/rseq.h:
- cpu_id_start,
- cpu_id,
- node_id,
- mm_cid.
Storing to those fields from a user-space library prevents any sharing
of the rseq ABI with other libraries and applications, as other users
are not aware that the content of those fields has been altered by a
third-party library.
This is unfortunately the current behavior of tcmalloc: it purposefully
overlaps part of a cached value with the cpu_id_start upper bits to get
notified about preemption, because the kernel clears those upper bits
before returning to user-space. This behavior does not conform to the
rseq uapi header ABI.
This prevents tcmalloc from using rseq when rseq is registered by the
GNU C library 2.35+. It requires tcmalloc users to disable glibc rseq
registration with a glibc tunable, which is a sad state of affairs.
Considering that tcmalloc and the GNU C library are the two first
upstream projects using rseq, and that they are already incompatible due
to use of this hack, adding kernel-level validation of all read-only
fields content is necessary to ensure future users of rseq abide by the
rseq ABI requirements.
Validate that user-space does not corrupt the read-only fields and
conform to the rseq uapi header ABI when the kernel is built with
CONFIG_DEBUG_RSEQ=y. This is done by storing a copy of the read-only
fields in the task_struct, and validating the prior values present in
user-space before updating them. If the values do not match, print
a warning on the console (printk_ratelimited()).
This is a first step to identify misuses of the rseq ABI by printing
a warning on the console. After a giving some time to userspace to
correct its use of rseq, the plan is to eventually terminate offending
processes with SIGSEGV.
This change is expected to produce warnings for the upstream tcmalloc
implementation, but tcmalloc developers mentioned they were open to
adapt their implementation to kernel-level change.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/google/tcmalloc/issues/144
|
|
Commit 422f2d418186 ("arm64: dts: qcom: Drop undocumented domain
"idle-state-name"") brought to light the common misbelief that
idle-state-names also applies to e.g. PSCI power domain idle states.
Make that a reality, mimicking the property name used by cpuidle
states.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Message-ID: <20241130-topic-idle_state_name-v1-2-d0ff67b0c8e9@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With FAN_DENY response, user trying to perform the filesystem operation
gets an error with errno set to EPERM.
It is useful for hierarchical storage management (HSM) service to be able
to deny access for reasons more diverse than EPERM, for example EAGAIN,
if HSM could retry the operation later.
Allow fanotify groups with priority FAN_CLASSS_PRE_CONTENT to responsd
to permission events with the response value FAN_DENY_ERRNO(errno),
instead of FAN_DENY to return a custom error.
Limit custom error values to errors expected on read(2)/write(2) and
open(2) of regular files. This list could be extended in the future.
Userspace can test for legitimate values of FAN_DENY_ERRNO(errno) by
writing a response to an fanotify group fd with a value of FAN_NOFD in
the fd field of the response.
The change in fanotify_response is backward compatible, because errno is
written in the high 8 bits of the 32bit response field and old kernels
reject respose value with high bits set.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/1e5fb6af84b69ca96b5c849fa5f10bdf4d1dc414.1731684329.git.josef@toxicpanda.com
|
|
Similar to FAN_ACCESS_PERM permission event, but it is only allowed with
class FAN_CLASS_PRE_CONTENT and only allowed on regular files and dirs.
Unlike FAN_ACCESS_PERM, it is safe to write to the file being accessed
in the context of the event handler.
This pre-content event is meant to be used by hierarchical storage
managers that want to fill the content of files on first read access.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b80986f8d5b860acea2c9a73c0acd93587be5fe4.1731684329.git.josef@toxicpanda.com
|
|
Generate FS_PRE_ACCESS event before truncate, without sb_writers held.
Move the security hooks also before sb_start_write() to conform with
other security hooks (e.g. in write, fallocate).
The event will have a range info of the page surrounding the new size
to provide an opportunity to fill the conetnt at the end of file before
truncating to non-page aligned size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/23af8201db6ac2efdea94f09ab067d81ba5de7a7.1731684329.git.josef@toxicpanda.com
|
|
We would like to add file range information to pre-content events.
Pass a struct file_range with offset and length to event handler
along with pre-content permission event.
The offset and length are aligned to page size, but we may need to
align them to minimum folio size for filesystems with large block size.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/88eddee301231d814aede27fb4d5b41ae37c9702.1731684329.git.josef@toxicpanda.com
|
|
The new FS_PRE_ACCESS permission event is similar to FS_ACCESS_PERM,
but it meant for a different use case of filling file content before
access to a file range, so it has slightly different semantics.
Generate FS_PRE_ACCESS/FS_ACCESS_PERM as two seperate events, so content
scanners could inspect the content filled by pre-content event handler.
Unlike FS_ACCESS_PERM, FS_PRE_ACCESS is also called before a file is
modified by syscalls as write() and fallocate().
FS_ACCESS_PERM is reported also on blockdev and pipes, but the new
pre-content events are only reported for regular files and dirs.
The pre-content events are meant to be used by hierarchical storage
managers that want to fill the content of files on first access.
There are some specific requirements from filesystems that could
be used with pre-content events, so add a flag for fs to opt-in
for pre-content events explicitly before they can be used.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/b934c5e3af205abc4e0e4709f6486815937ddfdf.1731684329.git.josef@toxicpanda.com
|
|
Avoid reusing it, because we would like to reserve it for future
FAN_PATH_MODIFY pre-content event.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/632d9f80428e2e7a6b6a8ccc2925d87c92bbb518.1731684329.git.josef@toxicpanda.com
|
|
So far, we set FMODE_NONOTIFY_ flags at open time if we know that there
are no permission event watchers at all on the filesystem, but lack of
FMODE_NONOTIFY_ flags does not mean that the file is actually watched.
For pre-content events, it is possible to optimize things so that we
don't bother trying to send pre-content events if file was not watched
(through sb, mnt, parent or inode itself) on open. Set FMODE_NONOTIFY_
flags according to that.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/2ddcc9f8d1fde48d085318a6b5a889289d8871d8.1731684329.git.josef@toxicpanda.com
|
|
Legacy inotify/fanotify listeners can add watches for events on inode,
parent or mount and expect to get events (e.g. FS_MODIFY) on files that
were already open at the time of setting up the watches.
fanotify permission events are typically used by Anti-malware sofware,
that is watching the entire mount and it is not common to have more that
one Anti-malware engine installed on a system.
To reduce the overhead of the fsnotify_file_perm() hooks on every file
access, relax the semantics of the legacy FAN_ACCESS_PERM event to generate
events only if there were *any* permission event listeners on the
filesystem at the time that the file was opened.
The new semantic is implemented by extending the FMODE_NONOTIFY bit into
two FMODE_NONOTIFY_* bits, that are used to store a mode for which of the
events types to report.
This is going to apply to the new fanotify pre-content events in order
to reduce the cost of the new pre-content event vfs hooks.
[Thanks to Bert Karwatzki <spasswolf@web.de> for reporting a bug in this
code with CONFIG_FANOTIFY_ACCESS_PERMISSIONS disabled]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wj8L=mtcRTi=NECHMGfZQgXOp_uix1YVh04fEmrKaMnXA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/5ea5f8e283d1edb55aa79c35187bfe344056af14.1731684329.git.josef@toxicpanda.com
|
|
Using the pattern 'scmi-protocol-0x<PROTO_ID>-<VEND_ID>' as MODULE_ALIAS
allows the SCMI core to autoload this protocol, if built as a module, when
its protocol operations are requested by an SCMI driver.
Cc: Peng Fan <peng.fan@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241209164957.1801886-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The R1B response type with ignoring CRC is used in the mmc_cqe_recovery(),
introduce the MMC_RSP_R1B_NO_CRC response type to simplify the code.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Message-ID: <20241126125041.16071-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
