| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a number of crashers
- Update email address for an NFSD reviewer
* tag 'nfsd-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
fs/nfsd: fix update of inode attrs in CB_GETATTR
nfsd: fix potential UAF in nfsd4_cb_getattr_release
nfsd: hold reference to delegation when updating it for cb_getattr
MAINTAINERS: Update Olga Kornievskaia's email address
nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
|
|
Commit d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
declared but never implemented these.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240810094540.2589310-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based
Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI
Accelerator devices.
https://www.xilinx.com/applications/data-center/v70.html
The QDMA subsystem is used in conjunction with the PCI Express IP block
to provide high performance data transfer between host memory and the
card's DMA subsystem.
+-------+ +-------+ +-----------+
PCIe | | | | | |
Tx/Rx | | | | AXI | |
<=======> | PCIE | <===> | QDMA | <====>| User Logic|
| | | | | |
+-------+ +-------+ +-----------+
The primary mechanism to transfer data using the QDMA is for the QDMA
engine to operate on instructions (descriptors) provided by the host
operating system. Using the descriptors, the QDMA can move data in both
the Host to Card (H2C) direction, or the Card to Host (C2H) direction.
The QDMA provides a per-queue basis option whether DMA traffic goes
to an AXI4 memory map (MM) interface or to an AXI4-Stream interface.
The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg302-qdma
Implements dmaengine APIs to support MM DMA transfers.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When this file was renamed in commit b8a6d9980f75 ("dma: ipu: rename
mach/ipu.h to include/linux/dma/ipu-dma.h"), 4 .c files have been modified
accordingly:
drivers/dma/ipu/ipu_idmac.c
drivers/dma/ipu/ipu_irq.c
--> removed in commit f1de55ff7c70 ("dmaengine: ipu: Remove the driver")
in 2023-08
drivers/media/platform/soc_camera/mx3_camera.c
--> removed in commit c93cc61475eb ("[media] staging/media: remove
deprecated mx3 driver") in 2016-06
drivers/video/mx3fb.c
--> removed in commit bfac19e239a7 ("fbdev: mx3fb: Remove the driver")
in 2023-08
Now include/linux/dma/ipu-dma.h is unused and can be removed as-well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/532e7e2816ccf226f3ab1fa76ec7873bc09299d0.1724258714.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The fallocate system call takes a mode argument, but that argument
contains a wild mix of exclusive modes and an optional flags.
Replace FALLOC_FL_SUPPORTED_MASK with FALLOC_FL_MODE_MASK, which excludes
the optional flag bit, so that we can use switch statement on the value
to easily enumerate the cases while getting the check for duplicate modes
for free.
To make this (and in the future the file system implementations) more
readable also add a symbolic name for the 0 mode used to allocate blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This adds GENMASK_U128() and __GENMASK_U128() macros using __BITS_PER_U128
and __int128 data types. These macros will be used in providing support for
generating 128 bit masks.
The macros wouldn't work in all assembler flavors for reasons described
in the comments on top of declarations. Enforce it for more by adding
!__ASSEMBLY__ guard.
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Short DIO reads, particularly in relation to cifs, are not being handled
correctly by cifs and netfslib. This can be tested by doing a DIO read of
a file where the size of read is larger than the size of the file. When it
crosses the EOF, it gets a short read and this gets retried, and in the
case of cifs, the retry read fails, with the failure being translated to
ENODATA.
Fix this by the following means:
(1) Add a flag, NETFS_SREQ_HIT_EOF, for the filesystem to set when it
detects that the read did hit the EOF.
(2) Make the netfslib read assessment stop processing subrequests when it
encounters one with that flag set.
(3) Return rreq->transferred, the accumulated contiguous amount read to
that point, to userspace for a DIO read.
(4) Make cifs set the flag and clear the error if the read RPC returned
ENODATA.
(5) Make cifs set the flag and clear the error if a short read occurred
without error and the read-to file position is now at the remote inode
size.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Selvin Xavier says:
=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============
Based on v6.11-rc5 for dependencies.
* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that we shrank struct file by 24 bytes we still have a 4 byte hole.
If we move struct file_ra_state into the union and f_iocb_flags out of
the union we close that whole and bring down struct file to 192 bytes.
Which means struct file is 3 cachelines and we managed to shrink it by
40 bytes this cycle.
I've tried to audit all codepaths that use f_ra and none of them seem to
rely on it in file->f_op->release() and never have since commit
1da177e4c3f4 ("Linux-2.6.12-rc2").
Link: https://lore.kernel.org/r/20240823-luftdicht-berappen-d69a2166a0db@brauner
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We do embedd struct fown_struct into struct file letting it take up 32
bytes in total. We could tweak struct fown_struct to be more compact but
really it shouldn't even be embedded in struct file in the first place.
Instead, actual users of struct fown_struct should allocate the struct
on demand. This frees up 24 bytes in struct file.
That will have some potentially user-visible changes for the ownership
fcntl()s. Some of them can now fail due to allocation failures.
Practically, that probably will almost never happen as the allocations
are small and they only happen once per file.
The fown_struct is used during kill_fasync() which is used by e.g.,
pipes to generate a SIGIO signal. Sending of such signals is conditional
on userspace having set an owner for the file using one of the F_OWNER
fcntl()s. Such users will be unaffected if struct fown_struct is
allocated during the fcntl() call.
There are a few subsystems that call __f_setown() expecting
file->f_owner to be allocated:
(1) tun devices
file->f_op->fasync::tun_chr_fasync()
-> __f_setown()
There are no callers of tun_chr_fasync().
(2) tty devices
file->f_op->fasync::tty_fasync()
-> __tty_fasync()
-> __f_setown()
tty_fasync() has no additional callers but __tty_fasync() has. Note
that __tty_fasync() only calls __f_setown() if the @on argument is
true. It's called from:
file->f_op->release::tty_release()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
tty_release() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of tty_release() are safe as well.
file->f_op->release::tty_open()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
__tty_hangup() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of __tty_hangup() are safe as well.
From the callchains it's obvious that (1) and (2) end up getting called
via file->f_op->fasync(). That can happen either through the F_SETFL
fcntl() with the FASYNC flag raised or via the FIOASYNC ioctl(). If
FASYNC is requested and the file isn't already FASYNC then
file->f_op->fasync() is called with @on true which ends up causing both
(1) and (2) to call __f_setown().
(1) and (2) are the only subsystems that call __f_setown() from the
file->f_op->fasync() handler. So both (1) and (2) have been updated to
allocate a struct fown_struct prior to calling fasync_helper() to
register with the fasync infrastructure. That's safe as they both call
fasync_helper() which also does allocations if @on is true.
The other interesting case are file leases:
(3) file leases
lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
Which in turn is called from:
generic_add_lease()
-> lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
So here again we can simply make generic_add_lease() allocate struct
fown_struct prior to the lease_manager_ops->lm_setup::lease_setup()
which happens under a spinlock.
With that the two remaining subsystems that call __f_setown() are:
(4) dnotify
(5) sockets
Both have their own custom ioctls to set struct fown_struct and both
have been converted to allocate a struct fown_struct on demand from
their respective ioctls.
Interactions with O_PATH are fine as well e.g., when opening a /dev/tty
as O_PATH then no file->f_op->open() happens thus no file->f_owner is
allocated. That's fine as no file operation will be set for those and
the device has never been opened. fcntl()s called on such things will
just allocate a ->f_owner on demand. Although I have zero idea why'd you
care about f_owner on an O_PATH fd.
Link: https://lore.kernel.org/r/20240813-work-f_owner-v2-1-4e9343a79f9f@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring
groups may be allocated RMID values which would overrun the
arch_mbm_{local,total} arrays.
This is due to inconsistencies in whether the SNC-adjusted num_rmid value or
the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The
num_rmid value for the L3 resource is currently:
resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache
As a simple fix, make resctrl_arch_system_num_rmid_idx() return the
SNC-adjusted, L3 num_rmid value on x86.
Fixes: e13db55b5a0d ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
|
|
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it
shares some registers and functions in those switches already
implemented in the KSZ DSA driver.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two charger current limit registers:
- Fast charge current limit (which controls current going from the
charger to the battery);
- CHGIN input current limit (which controls current going into the
charger through the cable).
Add the necessary functions to retrieve the CHGIN input limit (from CHARGER
regulator) and maximum fast charge current values, and expose them as power
supply properties.
Tested-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816-max77693-charger-extcon-v4-3-050a0a9bfea0@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
By allowing the drivers to return a "const *" they can constify their
static report arrays.
This makes it clear to driver authors that the HID core will not modify
those reports and they can be reused for multiple devices.
Furthermore security is slightly improved as those reports are protected
against accidental or malicious modifications.
[bentiss: fixup hid-cougar.c and hid-multitouch.c for latest version of
the master branch]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-6-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-5-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
fetch_item() does not modify the descriptor it operates on.
As a prerequisite for the constification of hid_driver::dev_rdesc,
mark the parameters and return value of fetch_item() as const.
Also adapt the variable types in the callers to match this
constification.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-4-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-3-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The parameter is never modified, so mark it as const.
This is a prerequisite for constification changes in the HID core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-2-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The parameter is never modified, so mark it as const.
Also inline the return statement to avoid a type mismatch error.
This is a prerequisite for constification changes in the HID core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-1-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Nicolin Chen says:
=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a device for address translation to an MSI location
(including nested cases), practically it is a universal region across all
domains allocated for the IOMMU that defines it.
Currently IOMMUFD core fetches and reserves the region during an attach to
an hwpt_paging. It works with a hwpt_paging-only case, but might not work
with a nested case where a device could directly attach to a hwpt_nested,
bypassing the hwpt_paging attachment.
Move the enforcement forward, to the hwpt_paging allocation function. Then
clean up all the SW_MSI related things in the attach/replace routine.
=========
Based on v6.11-rc5 for dependencies.
* nesting_reserved_regions: (562 commits)
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
Linux 6.11-rc5
...
|
|
RISC-V IMSIC interrupt controller provides IPI and MSI support.
Currently, DT based drivers setup the IPI feature early during boot but
defer setting up the MSI functionality. However, in ACPI systems, PCI
subsystem is probed early and assume MSI controller is already setup.
Hence, both IPI and MSI features need to be initialized early itself.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-16-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the IRQ model for RISC-V INTC so that acpi_set_irq_model can use this
for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-8-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new function for RISC-V to do architecture specific initialization
similar to acpi_arm_init(). Some of the ACPI tables are architecture
specific and there is no reason trying to find them on other
architectures. So, add acpi_riscv_init() similar to acpi_arm_init().
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-4-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Unlike OF framework, the irqchip probe using IRQCHIP_ACPI_DECLARE has no
order defined. Depending on the Makefile is not a good idea. So,
usually it is worked around by mandating only root interrupt controller
probed using IRQCHIP_ACPI_DECLARE and other interrupt controllers are
probed via cascade mechanism.
However, this is also not a clean solution because if there are multiple
root controllers (ex: RINTC in RISC-V which is per CPU) which need to be
probed first, then the cascade will happen for every root controller.
So, introduce an architecture specific weak function
arch_sort_irqchip_probe() to order the probing of the interrupt
controllers which can be implemented by different architectures as per
their interrupt controller hierarchy.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-3-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, KASAN is unable to catch use-after-free in SLAB_TYPESAFE_BY_RCU
slabs because use-after-free is allowed within the RCU grace period by
design.
Add a SLUB debugging feature which RCU-delays every individual
kmem_cache_free() before either actually freeing the object or handing it
off to KASAN, and change KASAN to poison freed objects as normal when this
option is enabled.
For now I've configured Kconfig.debug to default-enable this feature in the
KASAN GENERIC and SW_TAGS modes; I'm not enabling it by default in HW_TAGS
mode because I'm not sure if it might have unwanted performance degradation
effects there.
Note that this is mostly useful with KASAN in the quarantine-based GENERIC
mode; SLAB_TYPESAFE_BY_RCU slabs are basically always also slabs with a
->ctor, and KASAN's assign_tag() currently has to assign fixed tags for
those, reducing the effectiveness of SW_TAGS/HW_TAGS mode.
(A possible future extension of this work would be to also let SLUB call
the ->ctor() on every allocation instead of only when the slab page is
allocated; then tag-based modes would be able to assign new tags on every
reallocation.)
Tested-by: syzbot+263726e59eab6b442723@syzkaller.appspotmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz> #slab
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Currently, when KASAN is combined with init-on-free behavior, the
initialization happens before KASAN's "invalid free" checks.
More importantly, a subsequent commit will want to RCU-delay the actual
SLUB freeing of an object, and we'd like KASAN to still validate
synchronously that freeing the object is permitted. (Otherwise this
change will make the existing testcase kmem_cache_invalid_free fail.)
So add a new KASAN hook that allows KASAN to pre-validate a
kmem_cache_free() operation before SLUB actually starts modifying the
object or its metadata.
Inside KASAN, this:
- moves checks from poison_slab_object() into check_slab_allocation()
- moves kasan_arch_is_ready() up into callers of poison_slab_object()
- removes "ip" argument of poison_slab_object() and __kasan_slab_free()
(since those functions no longer do any reporting)
Acked-by: Vlastimil Babka <vbabka@suse.cz> #slub
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add a kvfree_rcu_barrier() function. It waits until all
in-flight pointers are freed over RCU machinery. It does
not wait any GP completion and it is within its right to
return immediately if there are no outstanding pointers.
This function is useful when there is a need to guarantee
that a memory is fully freed before destroying memory caches.
For example, during unloading a kernel module.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Since commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"),
this is not used anymore.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Change type of parameter @reason to enum rfkill_hard_block_reasons
for API rfkill_set_hw_state_reason() according to its comments, and
all kernel callers have invoked the API with enum type actually.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20240811-rfkill_fix-v2-1-9050760336f4@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These functions is never implemented and used.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Remove unused return value of jbd2_fc_release_bufs.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240801013815.2393869-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Use the correct struct member name in the kernel-doc notation
to prevent a kernel-doc build warning.
include/linux/jbd2.h:1303: warning: Function parameter or struct member 'j_transaction_overhead_buffers' not described in 'journal_s'
include/linux/jbd2.h:1303: warning: Excess struct member 'j_transaction_overhead' description in 'journal_s'
Fixes: e3a00a23781c ("jbd2: precompute number of transaction descriptor blocks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240710182252.4c281445@canb.auug.org.au/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240723051647.3053491-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
|
|
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247efb ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").
Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Currently, we copy the mtime and ctime to the in-core inode and then
mark the inode dirty. This is fine for certain types of filesystems, but
not all. Some require a real setattr to properly change these values
(e.g. ceph or reexported NFS).
Fix this code to call notify_change() instead, which is the proper way
to effect a setattr. There is one problem though:
In this case, the client is holding a write delegation and has sent us
attributes to update our cache. We don't want to break the delegation
for this since that would defeat the purpose. Add a new ATTR_DELEG flag
that makes notify_change bypass the try_break_deleg call.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
pstore_dump() is called when both preemption and local IRQ are disabled,
and a spinlock is obtained, which is problematic for the RT kernel because
in this configuration, spinlocks are sleep locks.
Replace the spinlock_t with raw_spinlock_t to avoid sleeping in atomic context.
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: linux-hardening@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20240819145945.61274-1-wen.yang@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Allowing iounmap() on memory that was not ioremap()'d in the first
place is obviously a bad idea. There is currently a feeble attempt to
avoid errant iounmap()s by checking to see if the address is below
"high_memory". But that's imprecise at best because there are plenty
of high addresses that are also invalid to call iounmap() on.
Thankfully, there is a more precise helper: is_ioremap_addr(). x86
just does not use it in iounmap().
Restrict iounmap() to addresses in the ioremap region, by using
is_ioremap_addr(). This aligns x86 closer to the generic iounmap()
implementation.
Additionally, add a warning in case there is an attempt to iounmap()
invalid memory. This replaces an existing silent return and will
help alert folks to any incorrect usage of iounmap().
Due to VMALLOC_START on i386 not being present in asm/pgtable.h,
include for asm/vmalloc.h had to be added to include/linux/ioremap.h.
[ dhansen: tweak subject and changelog ]
Signed-off-by: Max Ramanouski <max8rr8@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/all/20240824220111.84441-1-max8rr8%40gmail.com
|
|
Rename apptag and appmask to lbat and lbatm so that it matches the field
names used in NVMe spec.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Correct spelling in Networking headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-12-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling in if_rmnet.h
As reported by codespell.
Cc: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-6-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).
Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending a RDMA_CM_REQUEST, the NVMe RDMA Transport Specification
allows you to populate the cntlid field in the RDMA_CM_REQUEST Private
Data.
The cntlid is returned by the target on completion of the first
RDMA_CM_REQUEST command (which creates the admin queue).
The cntlid field can then be populated by the host when the I/O queues
are created (using additional RDMA_CM_REQUEST commands), such that the
target can perform extra validation for additional RDMA_CM_REQUEST
commands.
This additional error code and error message is also added, such that
nvme_rdma_cm_msg() will display the proper error message if the target
fails the RDMA_CM_REQUEST command because of this extra validation.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Reorder include files to alphabetic order to simplify maintenance, and
separate local headers and global headers with a blank line.
No functional change intended.
Link: https://patch.msgid.link/r/7524b037cc05afe19db3c18f863253e1d1554fa2.1722644866.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Modules registering drivers with usb_serial_register_drivers() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
USB serial code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ johan: amend commit summary ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The last users of 'enum mmc_blk_status' and 'struct mmc_async_req'
were removed by commit 126b62700386 ("mmc: core: Remove code no longer
needed after the switch to blk-mq") in 2017, remove these two left-over
data structures.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240823225917.2826156-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The 'mmc_context_info' structure is unused.
It has been introduced in:
- commit 2220eedfd7ae ("mmc: fix async request mechanism for sequential
read scenarios")
in 2013-02 and its usages have been removed in:
- commit 126b62700386 ("mmc: core: Remove code no longer needed after the
switch to blk-mq")
- commit 0fbfd1251830 ("mmc: block: Remove code no longer needed after
the switch to blk-mq")
in 2017-12.
Now remove this unused structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/232106a8a6a374dee25feea9b94498361568c10b.1724246389.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
