| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
perf always allocates contiguous AUX pages based on aux_watermark.
However, this contiguous allocation doesn't benefit all PMUs. For
instance, ARM SPE and TRBE operate with virtual pages, and Coresight
ETR allocates a separate buffer. For these PMUs, allocating contiguous
AUX pages unnecessarily exacerbates memory fragmentation. This
fragmentation can prevent their use on long-running devices.
This patch modifies the perf driver to be memory-friendly by default,
by allocating non-contiguous AUX pages. For PMUs requiring contiguous
pages (Intel BTS and some Intel PT), the existing
PERF_PMU_CAP_AUX_NO_SG capability can be used. For PMUs that don't
require but can benefit from contiguous pages (some Intel PT), a new
capability, PERF_PMU_CAP_AUX_PREFER_LARGE, is added to maintain their
existing behavior.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250508232642.148767-1-yabinc@google.com
|
|
Improve code readability by using bdev_is_zone_aligned() and
bdev_offset_from_zone_start() where applicable. No functionality
has been changed.
This patch is a reworked version of a patch from Pankaj Raghav.
See also https://lore.kernel.org/linux-block/20220923173618.6899-11-p.raghav@samsung.com/.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Since commit 58d9a38f6fac ("PCI: Skip attaching driver in device_add()"),
PCI enumeration is split into two steps: In the first step, all devices
are published in sysfs with device_add(). In the second step, drivers are
bound to the devices with device_attach(). To delay driver binding until
the second step, a "bool match_driver" in struct pci_dev is used.
Instead of a bool, use a bit in the "unsigned long priv_flags" to shrink
struct pci_dev a little and prevent use of the bool outside the PCI core
(as has happened with commit cbbc00be2ce3 ("iommu/amd: Prevent binding
other PCI drivers to IOMMU PCI devices")).
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/d22a9e5b81d6bd8dd1837607d6156679b3b1199c.1745572340.git.lukas@wunner.de
|
|
mirred_nest_level is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move mirred_nest_level to struct netdev_xmit as u8, provide wrappers.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-11-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
system_page_pool is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a page_pool member (original system_page_pool) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update the for_each_netdev_in_bond_rcu macro to iterate through network
devices in the bond's network namespace instead of always using
init_net. This change is safe because:
1. **Bond-Slave Namespace Relationship**: A bond device and its slaves
must reside in the same network namespace. The bond device's
namespace is established at creation time and cannot change.
2. **Slave Movement Implications**: Any attempt to move a slave device
to a different namespace automatically removes it from the bond, as
per kernel networking stack rules.
This maintains the invariant that slaves must exist in the same
namespace as their bond.
This change is part of an effort to enable Link Aggregation (LAG) to
work properly inside custom network namespaces. Previously, the macro
would only find slave devices in the initial network namespace,
preventing proper bonding functionality in custom namespaces.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250513081922.525716-1-mbloch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prepare for making inode operations killable while they're waiting for
the lock.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250513150327.1373061-1-max.kellermann@ionos.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
The driver is for codec ES8389 of everest-semi.
|
|
This is a preparation for large readdir buffers in fuse.
Simply setting the fuse buffer size to the userspace buffer size should
work, the record sizes are similar (fuse's is slightly larger than libc's,
so no overflow should ever happen).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Link: https://lore.kernel.org/20250513151012.1476536-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Precision Time Management (PTM) mechanism defined in PCIe spec r6.0,
sec 6.21 allows precise coordination of timing information across multiple
components in a PCIe hierarchy with independent local time clocks.
PCI core already supports enabling PTM in the root port and endpoint
devices through PTM Extended Capability registers. But the PTM context
supported by the PTM capable components such as Root Complex (RC) and
Endpoint (EP) controllers were not exposed as of now. Part of the reason is
that the spec doesn't define how the context information is exposed to the
software and left it to the vendor implementation. So there is no
standardized way to get access to the context information and each vendor
have defined their own way.
This commit adds debugfs support to expose the PTM context to userspace
from both PCIe RC and EP controllers. Since the context information is
exposed in a vendor specific way, the debugfs interface allows the
controller drivers to implement callbacks for each attribute, to be called
by the generic PTM driver.
The Controller drivers are expected to call pcie_ptm_create_debugfs() to
create the debugfs attributes for the PTM context and call
pcie_ptm_destroy_debugfs() to destroy them. The drivers should also
populate the relevant callbacks in the 'struct pcie_ptm_ops' structure
based on the controller implementation.
Below PTM context are exposed through debugfs:
PCIe RC
=======
1. PTM Local clock
2. PTM T2 timestamp
3. PTM T3 timestamp
4. PTM Context valid
PCIe EP
=======
1. PTM Local clock
2. PTM T1 timestamp
3. PTM T4 timestamp
4. PTM Master clock
5. PTM Context update
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: fix overflow issue reported by Dan Carpenter from
https://lore.kernel.org/linux-pci/b41c1754-c6b7-4805-9f14-7c643d6c5304@suswa.mountain]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20250505-pcie-ptm-v4-1-02d26d51400b@linaro.org
|
|
When getting the directory contents, the entries are first fetched to a
kernel buffer, then they are copied to userspace with dir_emit(). This
second phase is non-blocking as long as the userspace buffer is not paged
out, making it interruptible makes zero sense.
Overload d_type as flags, since it only uses 4 bits from 32.
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/20250513112335.1473177-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
lib/crc32.c and include/linux/crc32.h got missed by the bulk SPDX
conversion because of the nonstandard explanation of the license.
However, crc32.c clearly states that it's licensed under the GNU General
Public License, Version 2. And the comment in crc32.h clearly indicates
that it's meant to have the same license as crc32.c. Therefore, apply
SPDX-License-Identifier: GPL-2.0-only to both files.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250514052409.194822-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Most tracepoints in the kernel are created with TRACE_EVENT(). The
TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in
reality, TRACE_EVENT() is just a helper macro that calls those other two
macros), will create not only a tracepoint (the function trace_<event>()
used in the kernel), it also exposes the tracepoint to user space along
with defining what fields will be saved by that tracepoint.
There are a few places that tracepoints are created in the kernel that are
not exposed to userspace via tracefs. They can only be accessed from code
within the kernel. These tracepoints are created with DEFINE_TRACE()
Most of these tracepoints end with "_tp". This is useful as when the
developer sees that, they know that the tracepoint is for in-kernel only
(meaning it can only be accessed inside the kernel, either directly by the
kernel or indirectly via modules and BPF programs) and is not exposed to
user space.
Instead of making this only a process to add "_tp", enforce it by making
the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This
requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro
to use that keeps the original name.
Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-12-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-11-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates
mmc_execute_tuning() to return 0 if that quirk is set. This fixes an
issue on certain Swissbit SD cards that do not support DDR50 tuning
where tuning requests caused I/O errors to be thrown.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On the Renesas RZ/V2H(P) family of SoCs, DMAC IPs are connected
to the Interrupt Control Unit (ICU).
For DMA transfers, a request number must be registered with the
ICU, which means that the DMAC driver has to be able to instruct
the ICU driver with the registration of such id.
Export rzv2h_icu_register_dma_req() so that the DMAC driver can
register the DMAC request number.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250423143422.3747702-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ACE3 introduced microphone privacy and along this feature it adds a new
register in vendor specific SHIM to control and status reporting.
The control of mic privacy via the SHIM register is only to enable the
interrupt generation via soundwire, but not handled by the soundwire code
as the mic privacy is not a feature of the soundwire IP.
On the other hand, printing the register value brings value for debugging,
so add a new flag to allow this conditionally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20250430074714.94000-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the SoundWire IRQ code uses the dev_num to create an IRQ
mapping for each slave. However, there is an issue there, the dev_num
is only allocated when the slave enumerates on the bus and enumeration
may happen before or after probe of the slave driver. In the case
enumeration happens after probe of the slave driver then the IRQ
mapping will use dev_num before it is set. This could cause multiple
slaves to use zero as their IRQ mapping.
It is very desirable to have the IRQ mapped before the slave probe
is called, so drivers can do resource allocation in probe as normal. To
solve these issues add an internal ID created for each slave when it is
probed and use that for mapping the IRQ.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250429101808.348462-3-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With the goal of deprecating / removing VOLUNTARY preempt, live-patch
needs to stop relying on cond_resched() to make forward progress.
Instead, rely on schedule() with TASK_FREEZABLE set. Just like
live-patching, the freezer needs to be able to stop tasks in a safe /
known state.
[bigeasy: use likely() in __klp_sched_try_switch() and update comments]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250509113659.wkP_HJ5z@linutronix.de
|
|
Introduce APIs for pausing and resuming trace source and export as GPL
symbols.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250401180708.385396-3-leo.yan@arm.com
|
|
Add support for the Exynos USB 3.2 DRD 4nm controller. It's used in
recent 4nm SoCs like Exynos2200 and Exynos2400.
This device consists of 3 underlying and independent phys: SEC link
control phy, Synopsys eUSB 2.0 and Synopsys USBDP/SS combophy. Unlike
older device designs, where the internal phy blocks were all IP of
Samsung, Synopsys phys are present. This means that the link controller
is now mapped differently to account for missing bits and registers.
The Synopsys phys also have separate register bases.
As there are non-SEC PHYs present now, it doesn't make much sense to
implement them in this driver. They are expected to be configured
by external drivers, so pass phandles to them. USBDRD3.2 link controller
set up is still required beforehand.
This commit adds the necessary changes for USB HS to work. USB SS and
DisplayPort are out of scope in this commit and will be introduced
in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250504144527.1723980-11-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current device MSI infrastructure is subtly broken, as it will issue an
.msi_prepare() callback into the MSI controller driver every time it needs
to allocate an MSI. That's pretty wrong, as the contract (or unwarranted
assumption, depending who you ask) between the MSI controller and the core
code is that .msi_prepare() is called exactly once per device.
This leads to some subtle breakage in some MSI controller drivers, as it
gives the impression that there are multiple endpoints sharing a bus
identifier (RID in PCI parlance, DID for GICv3+). It implies that whatever
allocation the ITS driver (for example) has done on behalf of these devices
cannot be undone, as there is no way to track the shared state. This is
particularly bad for wire-MSI devices, for which .msi_prepare() is called
for each input line.
To address this issue, move the call to .msi_prepare() to take place at the
point of irq domain allocation, which is the only place that makes
sense. The msi_alloc_info_t structure is made part of the
msi_domain_template, so that its life-cycle is that of the domain as well.
Finally, the msi_info::alloc_data field is made to point at this allocation
tracking structure, ensuring that it is carried around the block.
This is all pretty straightforward, except for the non-device-MSI
leftovers, which still have to call .msi_prepare() at the old spot. One
day...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-4-maz@kernel.org
|
|
While the MSI ops do have a .msi_prepare() callback that is responsible for
setting up the relevant (usually per-device) allocation, there is no
callback reversing this setup.
For this purpose, add .msi_teardown() callback.
In order to avoid breaking the ITS driver that suffers from related issues,
do not call the callback just yet.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-2-maz@kernel.org
|
|
Add support for the new V4L2_CID_FLASH_DURATION control to the LEDs
driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20250507-ov9282-flash-strobe-v4-2-72b299c1b7c9@linux.dev
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit affccb16c117 ("ata: ahci: print the lpm policy on boot") added a
lpm-pol print during boot, which shows the LPM policy used by each port.
While the LPM policy is usually determined by the Kconfig
CONFIG_SATA_MOBILE_LPM_POLICY, the Kconfig value is overridden e.g. if
firmware has marked the port as hotplug capable / external.
Commit f97106b10d9a ("ata: ahci: Add debug print for external port") did
add a debug print to show if LPM was disabled because firmware has marked
the port as external, however, because devices having broken LPM (even
though they claim to support it) is more common than one would have hoped,
print "ext" during boot if firmware has marked the port is external.
This will make it easier to debug certain LPM issues, e.g. if firmware has
enabled/marked only some of the ports as hotplug capable / external.
Before (port marked as external by firmware):
ata1: SATA max UDMA/133 abar m4096@0xfebd3000 port 0xfebd3100 irq 57 lpm-pol 0
After (port marked as external by firmware):
ata1: SATA max UDMA/133 abar m4096@0xfebd3000 port 0xfebd3100 irq 57 lpm-pol 0 ext
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Now that neither crc16_table nor crc16_byte() is used outside
lib/crc16.c, fold them into lib/crc16.c.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250513022115.39109-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Instead of hardcoding the list of kfuncs that need prog->aux passed to
them with a combination of fixup_kfunc_call adjustment + __ign suffix,
combine both in __prog suffix, which ignores the argument passed in, and
fixes it up to the prog->aux. This allows kfuncs to have the prog->aux
passed into them without having to touch the verifier.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250513142812.1021591-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The functionality of mdiobus_register_board_info() typically isn't
optional for the caller. Therefore remove the stub.
Note: Currently we have only one caller of mdiobus_register_board_info(),
in a DSA/PHYLINK context. Therefore CONFIG_MDIO_DEVICE is selected anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/410a2222-c4e8-45b0-9091-d49674caeb00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove pgd_offset_gate() completely and simply make the single caller use
pgd_offset().
It appears that the gate area resides in the kernel-mapped segment
exclusively on IA64. Therefore, removing pgd_offset_k is safe since IA64
is now obsolete.
Link: https://lkml.kernel.org/r/tencent_503130C3CD56569191396268CF4D12F09A06@qq.com
Signed-off-by: Feng Lee <379943137@qq.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: bibo mao <maobibo@loongson.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "eliminate mmap() retry merge, add .mmap_prepare hook", v2.
During the mmap() of a file-backed mapping, we invoke the underlying
driver file's mmap() callback in order to perform driver/file system
initialisation of the underlying VMA.
This has been a source of issues in the past, including a significant
security concern relating to unwinding of error state discovered by Jann
Horn, as fixed in commit 5de195060b2e ("mm: resolve faulty mmap_region()
error path behaviour") which performed the recent, significant, rework of
mmap() as a whole.
However, we have had a fly in the ointment remain - drivers have a great
deal of freedom in the .mmap() hook to manipulate VMA state (as well as
page table state).
This can be problematic, as we can no longer reason sensibly about VMA
state once the call is complete (the ability to do - anything - here does
rather interfere with that).
In addition, callers may choose to do odd or unusual things which might
interfere with subsequent steps in the mmap() process, and it may do so
and then raise an error, requiring very careful unwinding of state about
which we can make no assumptions.
Rather than providing such an open-ended interface, this series provides
an alternative, far more restrictive one - we expose a whitelist of fields
which can be adjusted by the driver, along with immutable state upon which
the driver can make such decisions:
struct vm_area_desc {
/* Immutable state. */
struct mm_struct *mm;
unsigned long start;
unsigned long end;
/* Mutable fields. Populated with initial state. */
pgoff_t pgoff;
struct file *file;
vm_flags_t vm_flags;
pgprot_t page_prot;
/* Write-only fields. */
const struct vm_operations_struct *vm_ops;
void *private_data;
};
The mmap logic then updates the state used to either merge with a VMA or
establish a new VMA based upon this logic.
This is achieved via new file hook .mmap_prepare(), which is, importantly,
invoked very early on in the mmap() process.
If an error arises, we can very simply abort the operation with very
little unwinding of state required.
The existing logic contains another, related, peccadillo - since the
.mmap() callback might do anything, it may also cause a previously
unmergeable VMA to become mergeable with adjacent VMAs.
Right now the logic will retry a merge like this only if the driver
changes VMA flags, and changes them in such a way that a merge might
succeed (that is, the flags are not 'special', that is do not contain any
of the flags specified in VM_SPECIAL).
This has also been the source of a great deal of pain - it's hard to
reason about an .mmap() callback that might do - anything - but it's also
hard to reason about setting up a VMA and writing to the maple tree, only
to do it again utilising a great deal of shared state.
Since .mmap_prepare() sets fields before the first merge is even
attempted, the use of this callback obviates the need for this retry merge
logic.
A driver may only specify .mmap_prepare() or the deprecated .mmap()
callback. In future we may add futher callbacks beyond .mmap_prepare() to
faciliate all use cass as we convert drivers.
In researching this change, I examined every .mmap() callback, and
discovered only a very few that set VMA state in such a way that a. the
VMA flags changed and b. this would be mergeable.
In the majority of cases, it turns out that drivers are mapping kernel
memory and thus ultimately set VM_PFNMAP, VM_MIXEDMAP, or other
unmergeable VM_SPECIAL flags.
Of those that remain I identified a number of cases which are only
applicable in DAX, setting the VM_HUGEPAGE flag:
* dax_mmap()
* erofs_file_mmap()
* ext4_file_mmap()
* xfs_file_mmap()
For this remerge to not occur and to impact users, each of these cases
would require a user to mmap() files using DAX, in parts, immediately
adjacent to one another.
This is a very unlikely usecase and so it does not appear to be worthwhile
to adjust this functionality accordingly.
We can, however, very quickly do so if needed by simply adding an
.mmap_prepare() callback to these as required.
There are two further non-DAX cases I idenitfied:
* orangefs_file_mmap() - Clears VM_RAND_READ if set, replacing with
VM_SEQ_READ.
* usb_stream_hwdep_mmap() - Sets VM_DONTDUMP.
Both of these cases again seem very unlikely to be mmap()'d immediately
adjacent to one another in a fashion that would result in a merge.
Finally, we are left with a viable case:
* secretmem_mmap() - Set VM_LOCKED, VM_DONTDUMP.
This is viable enough that the mm selftests trigger the logic as a matter
of course. Therefore, this series replace the .secretmem_mmap() hook with
.secret_mmap_prepare().
This patch (of 3):
Provide a means by which drivers can specify which fields of those
permitted to be changed should be altered to prior to mmap()'ing a range
(which may either result from a merge or from mapping an entirely new
VMA).
Doing so is substantially safer than the existing .mmap() calback which
provides unrestricted access to the part-constructed VMA and permits
drivers and file systems to do 'creative' things which makes it hard to
reason about the state of the VMA after the function returns.
The existing .mmap() callback's freedom has caused a great deal of issues,
especially in error handling, as unwinding the mmap() state has proven to
be non-trivial and caused significant issues in the past, for instance
those addressed in commit 5de195060b2e ("mm: resolve faulty mmap_region()
error path behaviour").
It also necessitates a second attempt at merge once the .mmap() callback
has completed, which has caused issues in the past, is awkward, adds
overhead and is difficult to reason about.
The .mmap_prepare() callback eliminates this requirement, as we can update
fields prior to even attempting the first merge. It is safer, as we
heavily restrict what can actually be modified, and being invoked very
early in the mmap() process, error handling can be performed safely with
very little unwinding of state required.
The .mmap_prepare() and deprecated .mmap() callbacks are mutually
exclusive, so we permit only one to be invoked at a time.
Update vma userland test stubs to account for changes.
Link: https://lkml.kernel.org/r/cover.1746792520.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/adb36a7c4affd7393b2fc4b54cc5cfe211e41f71.1746792520.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "suspend in progress" check in device_wakeup_enable() does not
cover hibernation, but arguably it should do that, so introduce
pm_sleep_transition_in_progress() covering transitions during both
system suspend and hibernation to use in there and use it also in
pm_debug_messages_should_print().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/7820474.EvYhyI6sBW@rjwysocki.net
[ rjw: Move the new function definition under CONFIG_PM_SLEEP ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Subsequent patches will split the single queue into separate bps and iops
queues. To prevent IO that has already passed through the bps queue at a
single tg level from being counted toward bps wait time again, we introduce
"BIO_TG_BPS_THROTTLED" flag. Since throttle and QoS operate at different
levels, we reuse the value as "BIO_QOS_THROTTLED".
We set this flag when charge bps and clear it when charge iops, as the bio
will move to the upper-level tg or be dispatched.
This patch does not involve functional changes.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Zizhi Wo <wozizhi@huaweicloud.com>
Link: https://lore.kernel.org/r/20250506020935.655574-5-wozizhi@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
for_each_node_with_cpus() calls nr_cpus_node() at every iteration, which
makes it O(N^2). Kernel tracks such nodes with N_CPU record in node_states
array. Switching to it makes for_each_node_with_cpus() O(N).
Andrea:
Now we can include also offline nodes with CPUs assigned (assuming it's
possible). If checking the online state is required, the user must use
node_online() within the loop.
CC: Andrea Righi <arighi@nvidia.com>
CC:Tejun Heo <tj@kernel.org>
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
|
|
This function isn't used anywhere. Remove it.
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250410092423.9831-1-alexs@kernel.org
|
|
close call
Adds a new function to the hid_driver struct that is called when the
userspace starts using the device, and another one that is called when
userspace stop using the device. With this a hid driver can implement
special suspend handling for devices currently not in use.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20250211133950.422232-1-wse@tuxedocomputers.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and NVMEM due for the v6.16 merge window
|
|
|
|
Add a function for updating the Energy Model for a CPU after its
capacity has changed, which subsequently will be used by the
intel_pstate driver.
An EM_PERF_DOMAIN_ARTIFICIAL check is added to em_recalc_and_update()
to prevent it from calling em_compute_costs() for an "artificial" perf
domain with a NULL cb parameter which would cause it to crash.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/3637203.iIbC2pHGDl@rjwysocki.net
|
|
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux into wip/leon-for-next
Tony Nguyen says:
====================
Prepare for Intel IPU E2000 (GEN3)
This is the first part in introducing RDMA support for idpf.
----------------------------------------------------------------
Tatyana Nikolova says:
To align with review comments, the patch series introducing RDMA
RoCEv2 support for the Intel Infrastructure Processing Unit (IPU)
E2000 line of products is going to be submitted in three parts:
1. Modify ice to use specific and common IIDC definitions and
pass a core device info to irdma.
2. Add RDMA support to idpf and modify idpf to use specific and
common IIDC definitions and pass a core device info to irdma.
3. Add RDMA RoCEv2 support for the E2000 products, referred to as
GEN3 to irdma.
This first part is a 5 patch series based on the original
"iidc/ice/irdma: Update IDC to support multiple consumers" patch
to allow for multiple CORE PCI drivers, using the auxbus.
Patches:
1) Move header file to new name for clarity and replace ice
specific DSCP define with a kernel equivalent one in irdma
2) Unify naming convention
3) Separate header file into common and driver specific info
4) Replace ice specific DSCP define with a kernel equivalent
one in ice
5) Implement core device info struct and update drivers to use it
----------------------------------------------------------------
v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com
IWL reviews:
[v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com
[v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com
[v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com
[v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com
[v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com
* 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
iidc/ice/irdma: Update IDC to support multiple consumers
ice: Replace ice specific DSCP mapping num with a kernel define
iidc/ice/irdma: Break iidc.h into two headers
iidc/ice/irdma: Rename to iidc_* convention
iidc/ice/irdma: Rename IDC header file
====================
Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add support for STM32MP25 SoC.
A new hardware configuration register (HWCFGR2) has been added, to gather
number of capture/compare channels, autonomous mode and input capture
capability. The full feature set is implemented in LPTIM1/2/3/4. LPTIM5
supports a smaller set of features. This can now be read from HWCFGR
registers.
Add new registers to the stm32-lptimer.h: CCMR1, CCR2, HWCFGR1/2 and VERR.
Update the stm32_lptimer data struct so signal the number of
capture/compare channels to the child devices.
Also Remove some unused bit masks (CMPOK_ARROK / CMPOKCF_ARROKCF).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250429125133.1574167-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Drivers need to make sure not to pass netmem dma-addrs to the
dma-mapping API in order to support netmem TX.
Add helpers and netmem_dma_*() helpers that enables special handling of
netmem dma-addrs that drivers can use.
Document in netmem.rst what drivers need to do to support netmem TX.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-7-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently net_iovs support only pp ref counts, and do not support a
page ref equivalent.
This is fine for the RX path as net_iovs are used exclusively with the
pp and only pp refcounting is needed there. The TX path however does not
use pp ref counts, thus, support for get_page/put_page equivalent is
needed for netmem.
Support get_netmem/put_netmem. Check the type of the netmem before
passing it to page or net_iov specific code to obtain a page ref
equivalent.
For dmabuf net_iovs, we obtain a ref on the underlying binding. This
ensures the entire binding doesn't disappear until all the net_iovs have
been put_netmem'ed. We do not need to track the refcount of individual
dmabuf net_iovs as we don't allocate/free them from a pool similar to
what the buddy allocator does for pages.
This code is written to be extensible by other net_iov implementers.
get_netmem/put_netmem will check the type of the netmem and route it to
the correct helper:
pages -> [get|put]_page()
dmabuf net_iovs -> net_devmem_[get|put]_net_iov()
new net_iovs -> new helpers
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
