| Age | Commit message (Collapse) | Author |
|---|
|
Pass the extact struct from a tc qdisc add to the block bind function and,
in turn, to the setup_tc ndo of binding device via the tc_block_offload
struct. Pass this back to any block callback registrations to allow
netlink logging of fails in the bind process.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Manage pending per-NAPI GRO packets via list_head.
Return an SKB pointer from the GRO receive handlers. When GRO receive
handlers return non-NULL, it means that this SKB needs to be completed
at this time and removed from the NAPI queue.
Several operations are greatly simplified by this transformation,
especially timing out the oldest SKB in the list when gro_count
exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue
in reverse order.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kristian Evensen says:
In a project I am involved in, we are running ipsec (Strongswan) on
different mt7621-based routers. Each router is configured as an
initiator and has around ~30 tunnels to different responders (running
on misc. devices). Before the flow cache was removed (kernel 4.9), we
got a combined throughput of around 70Mbit/s for all tunnels on one
router. However, we recently switched to kernel 4.14 (4.14.48), and
the total throughput is somewhere around 57Mbit/s (best-case). I.e., a
drop of around 20%. Reverting the flow cache removal restores, as
expected, performance levels to that of kernel 4.9.
When pcpu xdst exists, it has to be validated first before it can be
used.
A negative hit thus increases cost vs. no-cache.
As number of tunnels increases, hit rate decreases so this pcpu caching
isn't a viable strategy.
Furthermore, the xdst cache also needs to run with BH off, so when
removing this the bh disable/enable pairs can be removed too.
Kristian tested a 4.14.y backport of this change and reported
increased performance:
In our tests, the throughput reduction has been reduced from around -20%
to -5%. We also see that the overall throughput is independent of the
number of tunnels, while before the throughput was reduced as the number
of tunnels increased.
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds support for virtual xfrm interfaces.
Packets that are routed through such an interface
are guaranteed to be IPsec transformed or dropped.
It is a generic virtual interface that ensures IPsec
transformation, no need to know what happens behind
the interface. This means that we can tunnel IPv4 and
IPv6 through the same interface and support all xfrm
modes (tunnel, transport and beet) on it.
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
This patch adds the xfrm interface id as a lookup key
for xfrm states and policies. With this we can assign
states and policies to virtual xfrm interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
Add a new flowi_xfrm structure with informations needed to do
a xfrm lookup. At the moment it keeps the informations about
the new xfrm interface id needed to lookup xfrm interfaces
that are introduced with a followup patch. We need this new
lookup key as other possible keys, like the ifindex is
already part of the xfrm selector and used as a key to
enforce the output device after the transformation in the
policy/state lookup.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.
The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.
An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.
Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
|
|
struct net are effectively allocated from order-1 pages on x86,
with one object per slab, meaning that the 13 low order bits
of their addresses are zero.
Once shifted by L1_CACHE_SHIFT, this leaves 7 zero-bits,
meaning that net_hash_mix() does not help spreading
objects on various hash tables.
For example, TCP listen table has 32 buckets, meaning that
all netns use the same bucket for port 80 or port 443.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit makes BBR use only the MSS (without any headers) to
calculate pacing rates when internal TCP-layer pacing is used.
This is necessary to achieve the correct pacing behavior in this case,
since tcp_internal_pacing() uses only the payload length to calculate
pacing delays.
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to the use of rhashtables in net namespaces,
rhashtable.h is included in lots of the kernel,
so a small changes can required a large recompilation.
This makes development painful.
This patch splits out rhashtable-types.h which just includes
the major type declarations, and does not include (non-trivial)
inline code. rhashtable.h is no longer included by anything
in the include/ directory.
Common include files only include rhashtable-types.h so a large
recompilation is only triggered when that changes.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported use after free that is caused by fib6_info being
freed without a proper RCU grace period.
CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
__read_once_size include/linux/compiler.h:188 [inline]
find_rr_leaf net/ipv6/route.c:705 [inline]
rt6_select net/ipv6/route.c:761 [inline]
fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823
ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856
ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082
fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122
ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110
ip6_route_output include/net/ip6_route.h:82 [inline]
icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline]
icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535
icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244
dst_link_failure include/net/dst.h:427 [inline]
ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695
neigh_invalidate+0x246/0x550 net/core/neighbour.c:892
neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978
call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
expire_timers kernel/time/timer.c:1363 [inline]
__run_timers+0x79e/0xc50 kernel/time/timer.c:1666
run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
__do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
invoke_softirq kernel/softirq.c:364 [inline]
irq_exit+0x1d1/0x200 kernel/softirq.c:404
exiting_irq arch/x86/include/asm/apic.h:527 [inline]
smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
</IRQ>
RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482
Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48
RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0
RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000
R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0
R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00
strlen include/linux/string.h:267 [inline]
getname_kernel+0x24/0x370 fs/namei.c:218
open_exec+0x17/0x70 fs/exec.c:882
load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780
search_binary_handler+0x17d/0x570 fs/exec.c:1653
exec_binprm fs/exec.c:1695 [inline]
__do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819
do_execveat_common fs/exec.c:1866 [inline]
do_execve fs/exec.c:1883 [inline]
__do_sys_execve fs/exec.c:1964 [inline]
__se_sys_execve fs/exec.c:1959 [inline]
__x64_sys_execve+0x8f/0xc0 fs/exec.c:1959
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f1576a46207
Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02
RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207
RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670
RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10
R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005
Allocated by task 12188:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
kmalloc include/linux/slab.h:513 [inline]
kzalloc include/linux/slab.h:706 [inline]
fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152
ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013
ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154
ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660
inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
sock_ioctl+0x30d/0x680 net/socket.c:1097
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
__do_sys_ioctl fs/ioctl.c:708 [inline]
__se_sys_ioctl fs/ioctl.c:706 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1402:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xd9/0x260 mm/slab.c:3813
fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207
fib6_info_release include/net/ip6_fib.h:286 [inline]
__ip6_del_rt_siblings net/ipv6/route.c:3235 [inline]
ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316
ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663
inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
sock_ioctl+0x30d/0x680 net/socket.c:1097
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
__do_sys_ioctl fs/ioctl.c:708 [inline]
__se_sys_ioctl fs/ioctl.c:706 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8801b5df2580
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 8 bytes inside of
256-byte region [ffff8801b5df2580, ffff8801b5df2680)
The buggy address belongs to the page:
page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0
raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
Fixes: a64efe142f5e ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove comparison of audit_enabled to magic numbers outside of audit.
Related: https://github.com/linux-audit/audit-kernel/issues/86
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add support for HE in mac80211 conforming with P802.11ax_D1.4.
Johannes: Fix another bug with the buf_size comparison in agg-rx.c.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It is a waste of memory to use a full "struct netns_sysctl_ipv6"
while only one pointer is really used, considering netns_sysctl_ipv6
keeps growing.
Also, since "struct netns_frags" has cache line alignment,
it is better to move the frags_hdr pointer outside, otherwise
we spend a full cache line for this pointer.
This saves 192 bytes of memory per netns.
Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add radiotap structures for HE.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
|
|
Add support for the HE in cfg80211 and also add userspace API to
nl80211 to send rate information out, conforming with P802.11ax_D2.0.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
|
|
Now sctp GSO uses skb_gro_receive() to append the data into head
skb frag_list. However it actually only needs very few code from
skb_gro_receive(). Besides, NAPI_GRO_CB has to be set while most
of its members are not needed here.
This patch is to add sctp_packet_gso_append() to build GSO frames
instead of skb_gro_receive(), and it would avoid many unnecessary
checks and make the code clearer.
Note that sctp will use page frags instead of frag_list to build
GSO frames in another patch. But it may take time, as sctp's GSO
frames may have different size. skb_segment() can only split it
into the frags with the same size, which would break the border
of sctp chunks.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we use check_hlist() for garbage colleciton. However, we
use the ‘zone’ from the counted entry to query the existence of
existing entries in the hlist. This could be wrong when they are in
different zones, and this patch fixes this issue.
Fixes: e59ea3df3fc2 ("netfilter: xt_connlimit: honor conntrack zone if available")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
While hacking on kTLS, I ran into the following panic from an
unprivileged netserver / netperf TCP session:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 800000037f378067 P4D 800000037f378067 PUD 3c0e61067 PMD 0
Oops: 0010 [#1] SMP KASAN PTI
CPU: 1 PID: 2289 Comm: netserver Not tainted 4.17.0+ #139
Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
RIP: 0010: (null)
Code: Bad RIP value.
RSP: 0018:ffff88036abcf740 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88036f5f6800 RCX: 1ffff1006debed26
RDX: ffff88036abcf920 RSI: ffff8803cb1a4f00 RDI: ffff8803c258c280
RBP: ffff8803c258c280 R08: ffff8803c258c280 R09: ffffed006f559d48
R10: ffff88037aacea43 R11: ffffed006f559d49 R12: ffff8803c258c280
R13: ffff8803cb1a4f20 R14: 00000000000000db R15: ffffffffc168a350
FS: 00007f7e631f4700(0000) GS:ffff8803d1c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000003ccf64005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? tls_sw_poll+0xa4/0x160 [tls]
? sock_poll+0x20a/0x680
? do_select+0x77b/0x11a0
? poll_schedule_timeout.constprop.12+0x130/0x130
? pick_link+0xb00/0xb00
? read_word_at_a_time+0x13/0x20
? vfs_poll+0x270/0x270
? deref_stack_reg+0xad/0xe0
? __read_once_size_nocheck.constprop.6+0x10/0x10
[...]
Debugging further, it turns out that calling into ctx->sk_poll() is
invalid since sk_poll itself is NULL which was saved from the original
TCP socket in order for tls_sw_poll() to invoke it.
Looks like the recent conversion from poll to poll_mask callback started
in 152524231023 ("net: add support for ->poll_mask in proto_ops") missed
to eventually convert kTLS, too: TCP's ->poll was converted over to the
->poll_mask in commit 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask")
and therefore kTLS wrongly saved the ->poll old one which is now NULL.
Convert kTLS over to use ->poll_mask instead. Also instead of POLLIN |
POLLRDNORM use the proper EPOLLIN | EPOLLRDNORM bits as the case in
tcp_poll_mask() as well that is mangled here.
Fixes: 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Watson <davejwatson@fb.com>
Tested-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Reject non-null terminated helper names from xt_CT, from Gao Feng.
2) Fix KASAN splat due to out-of-bound access from commit phase, from
Alexey Kodanev.
3) Missing conntrack hook registration on IPVS FTP helper, from Julian
Anastasov.
4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo.
5) Fix inverted check on packet xmit to non-local addresses, also from
Julian.
6) Fix ebtables alignment compat problems, from Alin Nastac.
7) Hook mask checks are not correct in xt_set, from Serhey Popovych.
8) Fix timeout listing of element in ipsets, from Jozsef.
9) Cap maximum timeout value in ipset, also from Jozsef.
10) Don't allow family option for hash:mac sets, from Florent Fourcot.
11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this
Florian.
12) Another bug reported by KASAN in the rbtree set backend, from
Taehee Yoo.
13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT.
From Gao Feng.
14) Missing initialization of match/target in ebtables, from Florian
Westphal.
15) Remove useless nft_dup.h file in include path, from C. Labbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()")
the sk_rmem_alloc field does not measure exactly anymore the
receive queue length, because we batch the rmem release. The issue
is really apparent only after commit 0d4a6608f68c ("udp: do rmem bulk
free even if the rx sk queue is empty"): the user space can easily
check for an empty socket with not-0 queue length reported by the 'ss'
tool or the procfs interface.
We need to use a custom UDP helper to report the correct queue length,
taking into account the forward allocation deficit.
Reported-by: trevor.francis@46labs.com
Fixes: 6b229cf77d68 ("UDP: add batching to udp_rmem_release()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
include/net/netfilter/nft_dup.h was introduced in d877f07112f1 ("netfilter: nf_tables: add nft_dup expression")
but was never user since this date.
Furthermore, the only struct in this file is unused elsewhere.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Another reasonable chunk of audit changes for v4.18, thirteen patches
in total.
The thirteen patches can mostly be broken down into one of four
categories: general bug fixes, accessor functions for audit state
stored in the task_struct, negative filter matches on executable
names, and extending the (relatively) new seccomp logging knobs to the
audit subsystem.
The main driver for the accessor functions from Richard are the
changes we're working on to associate audit events with containers,
but I think they have some standalone value too so I figured it would
be good to get them in now.
The seccomp/audit patches from Tyler apply the seccomp logging
improvements from a few releases ago to audit's seccomp logging;
starting with this patchset the changes in
/proc/sys/kernel/seccomp/actions_logged should apply to both the
standard kernel logging and audit.
As usual, everything passes the audit-testsuite and it happens to
merge cleanly with your tree"
[ Heh, except it had trivial merge conflicts with the SELinux tree that
also came in from Paul - Linus ]
* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Fix wrong task in comparison of session ID
audit: use existing session info function
audit: normalize loginuid read access
audit: use new audit_context access funciton for seccomp_actions_logged
audit: use inline function to set audit context
audit: use inline function to get audit context
audit: convert sessionid unset to a macro
seccomp: Don't special case audited processes when logging
seccomp: Audit attempts to modify the actions_logged sysctl
seccomp: Configurable separator for the actions_logged string
seccomp: Separate read and write code for actions_logged sysctl
audit: allow not equal op for audit by executable
audit: add syscall information to FEATURE_CHANGE records
|
|
strp_unpause queues strp_work in order to parse any messages that
arrived while the strparser was paused. However, the process invoking
strp_unpause could eagerly parse a buffered message itself if it held
the sock lock.
__strp_unpause is an alternative to strp_pause that avoids the scheduling
overhead that results when a receiving thread unpauses the strparser
and waits for the next message to be delivered by the workqueue thread.
This patch more than doubled the IOPS achieved in a benchmark of NBD
traffic encrypted using ktls.
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-06-05
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a new BPF hook for sendmsg similar to existing hooks for bind and
connect: "This allows to override source IP (including the case when it's
set via cmsg(3)) and destination IP:port for unconnected UDP (slow path).
TCP and connected UDP (fast path) are not affected. This makes UDP support
complete, that is, connected UDP is handled by connect hooks, unconnected
by sendmsg ones.", from Andrey.
2) Rework of the AF_XDP API to allow extending it in future for type writer
model if necessary. In this mode a memory window is passed to hardware
and multiple frames might be filled into that window instead of just one
that is the case in the current fixed frame-size model. With the new
changes made this can be supported without having to add a new descriptor
format. Also, core bits for the zero-copy support for AF_XDP have been
merged as agreed upon, where i40e bits will be routed via Jeff later on.
Various improvements to documentation and sample programs included as
well, all from Björn and Magnus.
3) Given BPF's flexibility, a new program type has been added to implement
infrared decoders. Quote: "The kernel IR decoders support the most
widely used IR protocols, but there are many protocols which are not
supported. [...] There is a 'long tail' of unsupported IR protocols,
for which lircd is need to decode the IR. IR encoding is done in such
a way that some simple circuit can decode it; therefore, BPF is ideal.
[...] user-space can define a decoder in BPF, attach it to the rc
device through the lirc chardev.", from Sean.
4) Several improvements and fixes to BPF core, among others, dumping map
and prog IDs into fdinfo which is a straight forward way to correlate
BPF objects used by applications, removing an indirect call and therefore
retpoline in all map lookup/update/delete calls by invoking the callback
directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper
for tc BPF programs to have an efficient way of looking up cgroup v2 id
for policy or other use cases. Fixes to make sure we zero tunnel/xfrm
state that hasn't been filled, to allow context access wrt pt_regs in
32 bit archs for tracing, and last but not least various test cases
for fixes that landed in bpf earlier, from Daniel.
5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with
a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect
call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper.
6) Add a new bpf_get_current_cgroup_id() helper that can be used in
tracing to retrieve the cgroup id from the current process in order
to allow for e.g. aggregation of container-level events, from Yonghong.
7) Two follow-up fixes for BTF to reject invalid input values and
related to that also two test cases for BPF kselftests, from Martin.
8) Various API improvements to the bpf_fib_lookup() helper, that is,
dropping MPLS bits which are not fully hashed out yet, rejecting
invalid helper flags, returning error for unsupported address
families as well as renaming flowlabel to flowinfo, from David.
9) Various fixes and improvements to sockmap BPF kselftests in particular
in proper error detection and data verification, from Prashant.
10) Two arm32 BPF JIT improvements. One is to fix imm range check with
regards to whether immediate fits into 24 bits, and a naming cleanup
to get functions related to rsh handling consistent to those handling
lsh, from Wang.
11) Two compile warning fixes in BPF, one for BTF and a false positive
to silent gcc in stack_map_get_build_id_offset(), from Arnd.
12) Add missing seg6.h header into tools include infrastructure in order
to fix compilation of BPF kselftests, from Mathieu.
13) Several formatting cleanups in the BPF UAPI helper description that
also fix an error during rst2man compilation, from Quentin.
14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is
not built into the kernel, from Yue.
15) Remove a useless double assignment in dev_map_enqueue(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extack argument to reload, port_split and port_unsplit operations.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tested: 'git grep tw_timeout' comes up empty and it builds :-)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we add the functionality required to support zero-copy Tx, and
also exposes various zero-copy related functions for the netdevs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Extend the xsk_rcv to support the new MEM_TYPE_ZERO_COPY memory, and
wireup ndo_bpf call in bind.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Here, a new type of allocator support is added to the XDP return
API. A zero-copy allocated xdp_buff cannot be converted to an
xdp_frame. Instead is the buff has to be copied. This is not supported
at all in this commit.
Also, an opaque "handle" is added to xdp_buff. This can be used as a
context for the zero-copy allocator implementation.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The xdp_umem_page holds the address for a page. Trade memory for
faster lookup. Later, we'll add DMA address here as well.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Moved struct xdp_umem to xdp_sock.h, in order to prepare for zero-copy
support.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio updates from Al Viro:
"Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.
The only thing I'm holding back for a day or so is Adam's aio ioprio -
his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
but let it sit in -next for decency sake..."
* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
aio: sanitize the limit checking in io_submit(2)
aio: fold do_io_submit() into callers
aio: shift copyin of iocb into io_submit_one()
aio_read_events_ring(): make a bit more readable
aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
aio: take list removal to (some) callers of aio_complete()
aio: add missing break for the IOCB_CMD_FDSYNC case
random: convert to ->poll_mask
timerfd: convert to ->poll_mask
eventfd: switch to ->poll_mask
pipe: convert to ->poll_mask
crypto: af_alg: convert to ->poll_mask
net/rxrpc: convert to ->poll_mask
net/iucv: convert to ->poll_mask
net/phonet: convert to ->poll_mask
net/nfc: convert to ->poll_mask
net/caif: convert to ->poll_mask
net/bluetooth: convert to ->poll_mask
net/sctp: convert to ->poll_mask
net/tipc: convert to ->poll_mask
...
|
|
Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also inconsistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 87ae68c8b4944d142447b88875c9c412c714434f.
Applied the wrong version of this fix, correct version
coming up.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the code paths calculating flow hash for IPv6 use flowlabel member
of struct flowi6 which, despite its name, encodes both flow label and
traffic class. If traffic class changes within a TCP connection (as e.g.
ssh does), ECMP route can switch between path. It's also incosistent with
other code paths where ip6_flowlabel() (returning only flow label) is used
to feed the key.
Use only flow label everywhere, including one place where hash key is set
using ip6_flowinfo().
Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
"Christoph's proc_create_... cleanups series"
* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
xfs, proc: hide unused xfs procfs helpers
isdn/gigaset: add back gigaset_procinfo assignment
proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
tty: replace ->proc_fops with ->proc_show
ide: replace ->proc_fops with ->proc_show
ide: remove ide_driver_proc_write
isdn: replace ->proc_fops with ->proc_show
atm: switch to proc_create_seq_private
atm: simplify procfs code
bluetooth: switch to proc_create_seq_data
netfilter/x_tables: switch to proc_create_seq_private
netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
neigh: switch to proc_create_seq_data
hostap: switch to proc_create_{seq,single}_data
bonding: switch to proc_create_seq_data
rtc/proc: switch to proc_create_single_data
drbd: switch to proc_create_single
resource: switch to proc_create_seq_data
staging/rtl8192u: simplify procfs code
jfs: simplify procfs code
...
|
|
Removing XDP_XMIT_FLAGS_NONE as all driver now implement
a flush operation in their ndo_xdp_xmit call. The compiler
will catch if any users of XDP_XMIT_FLAGS_NONE remains.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch only change the API and reject any use of flags. This is an
intermediate step that allows us to implement the flush flag operation
later, for each individual driver in a separate patch.
The plan is to implement flush operation via XDP_XMIT_FLUSH flag
and then remove XDP_XMIT_FLAGS_NONE when done.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If there is a significant amount of chains list search is too slow, so
add an rhlist table for this.
This speeds up ruleset loading: for every new rule we have to check if
the name already exists in current generation.
We need to be able to cope with duplicate chain names in case a transaction
drops the nfnl mutex (for request_module) and the abort of this old
transaction is still pending.
The list is kept -- we need a way to iterate chains even if hash resize is
in progress without missing an entry.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Before this patch, cloned expressions are released via ->destroy. This
is a problem for the new connlimit expression since the ->destroy path
drop a reference on the conntrack modules and it unregisters hooks. The
new ->destroy_clone provides context that this expression is being
released from the packet path, so it is mirroring ->clone(), where
neither module reference is dropped nor hooks need to be unregistered -
because this done from the control plane path from the ->init() path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use garbage collector to schedule removal of elements based of feedback
from expression that this element comes with. Therefore, the garbage
collector is not guided by timeout expirations in this new mode.
The new connlimit expression sets on the NFT_EXPR_GC flag to enable this
behaviour, the dynset expression needs to explicitly enable the garbage
collector via set->ops->gc_init call.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_set_elem_destroy() can be called from call_rcu context. Annotate
netns and table in set object so we can populate the context object.
Moreover, pass context object to nf_tables_set_elem_destroy() from the
commit phase, since it is already available from there.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch provides an interface to maintain the list of connections and
the lookup function to obtain the number of connections in the list.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The new connlimit object needs this to properly deal with conntrack
dependencies.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The extracted functions will likely be usefull to implement tproxy
support in nf_tables.
Extrancted functions:
- nf_tproxy_sk_is_transparent
- nf_tproxy_laddr4
- nf_tproxy_handle_time_wait4
- nf_tproxy_get_sock_v4
- nf_tproxy_laddr6
- nf_tproxy_handle_time_wait6
- nf_tproxy_get_sock_v6
(nf_)tproxy_handle_time_wait6 also needed some refactor as its current
implementation was xtables-specific.
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is a function in include/net/netfilter/nf_socket.h to decide if a
socket has IP(V6)_TRANSPARENT socket option set or not. However this
does the same as inet_sk_transparent() in include/net/tcp.h
include/net/tcp.h:1733
/* This helper checks if socket has IP_TRANSPARENT set */
static inline bool inet_sk_transparent(const struct sock *sk)
{
switch (sk->sk_state) {
case TCP_TIME_WAIT:
return inet_twsk(sk)->tw_transparent;
case TCP_NEW_SYN_RECV:
return inet_rsk(inet_reqsk(sk))->no_srccheck;
}
return inet_sk(sk)->transparent;
}
tproxy_sk_is_transparent has also been refactored to use this function
instead of reimplementing it.
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree, the most relevant things in this batch are:
1) Compile masquerade infrastructure into NAT module, from Florian Westphal.
Same thing with the redirection support.
2) Abort transaction if early initialization of the commit phase fails.
Also from Florian.
3) Get rid of synchronize_rcu() by using rule array in nf_tables, from
Florian.
4) Abort nf_tables batch if fatal signal is pending, from Florian.
5) Use .call_rcu nfnetlink from nf_tables to make dumps fully lockless.
From Florian Westphal.
6) Support to match transparent sockets from nf_tables, from Máté Eckl.
7) Audit support for nf_tables, from Phil Sutter.
8) Validate chain dependencies from commit phase, fall back to fine grain
validation only in case of errors.
9) Attach dst to skbuff from netfilter flowtable packet path, from
Jason A. Donenfeld.
10) Use artificial maximum attribute cap to remove VLA from nfnetlink.
Patch from Kees Cook.
11) Add extension to allow to forward packets through neighbour layer.
12) Add IPv6 conntrack helper support to IPVS, from Julian Anastasov.
13) Add IPv6 FTP conntrack support to IPVS, from Julian Anastasov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip_vs_ftp requires conntrack modules for mangling
of FTP command responses in passive mode.
Make sure the conntrack hooks are registered when
real servers use NAT method in FTP virtual service.
The hooks will be registered while the service is
present.
Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
