| Age | Commit message (Collapse) | Author |
|---|
|
Save a bit a space, and could help future sysctls to
use the same pattern.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skip_notify_on_dev_down ctl table expects this field
to be an int (4 bytes), not a bool (1 byte).
Because proc_dou8vec_minmax() was added in 5.13,
this patch converts skip_notify_on_dev_down to an int.
Following patch then converts the field to u8 and use proc_dou8vec_minmax().
Fixes: 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Callers of flowi4_update_output() never try to update ->flowi4_tos:
* ip_route_connect() updates ->flowi4_tos with its own current
value.
* ip_route_newports() has two users: tcp_v4_connect() and
dccp_v4_connect. Both initialise fl4 with ip_route_connect(), which
in turn sets ->flowi4_tos with RT_TOS(inet_sk(sk)->tos) and
->flowi4_scope based on SOCK_LOCALROUTE.
Then ip_route_newports() updates ->flowi4_tos with
RT_CONN_FLAGS(sk), which is the same as RT_TOS(inet_sk(sk)->tos),
unless SOCK_LOCALROUTE is set on the socket. In that case, the
lowest order bit is set to 1, to eventually inform
ip_route_output_key_hash() to restrict the scope to RT_SCOPE_LINK.
This is equivalent to properly setting ->flowi4_scope as
ip_route_connect() did.
* ip_vs_xmit.c initialises ->flowi4_tos with memset(0), then calls
flowi4_update_output() with tos=0.
* sctp_v4_get_dst() uses the same RT_CONN_FLAGS_TOS() when
initialising ->flowi4_tos and when calling flowi4_update_output().
In the end, ->flowi4_tos never changes. So let's just drop the tos
parameter. This will simplify the conversion of ->flowi4_tos from __u8
to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With this commit, all the GIDs ("0 4294967294") can be written to the
"net.ipv4.ping_group_range" sysctl.
Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in
include/linux/uidgid.h), and an attempt to register this number will cause
-EINVAL.
Prior to this commit, only up to GID 2147483647 could be covered.
Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example
value, but this example was wrong and causing -EINVAL.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the offending fixes commit I mistakenly removed the reply message of
the port new command. I was under impression it is a new port
notification, partly due to the "notify" in the name of the helper
function. Bring the code sending reply with new port message back, this
time putting it directly to devlink_nl_cmd_port_new_doit()
Fixes: c496daeb8630 ("devlink: remove duplicate port notification")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230531142025.2605001-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit, the member key is longer 4-byte aligned. On
platforms that do not support unaligned access, e.g., MIPS32R2 with
unaligned_action set to 1, this will trigger a crash when accessing
an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer.
Change the type of the key to u32 to make it aligned.
Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Qingfang DENG <qingfang.deng@siflower.com.cn>
Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/sfc/tc.c
622ab656344a ("sfc: fix error unwinds in TC offload")
b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port")
net/mptcp/protocol.c
5b825727d087 ("mptcp: add annotations around msk->subflow accesses")
e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With RX coalescing, one CQE entry can be used to indicate multiple packets
on the receive queue. This saves processing time and PCI bandwidth over
the CQ.
The MANA Ethernet driver also uses the v2 version of the protocol. It
doesn't use RX coalescing and its behavior is not changed.
Link: https://lore.kernel.org/r/1684045095-31228-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In this patch, we mainly try to handle sending a compressed ack
correctly if it's deferred.
Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(),
if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED
and then defer to the release cb phrase. Later once user releases
the sock, tcp_delack_timer_handler() should send a ack as expected,
which, however, cannot happen due to lack of ICSK_ACK_TIMER flag.
Therefore, the receiver would not sent an ack until the sender's
retransmission timeout. It definitely increases unnecessary latency.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: fuyuanli <fuyuanli@didiglobal.com>
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Offloading drivers may report some additional statistics counters, some
of them even suggested by 802.1Q, like TransmissionOverrun.
In my opinion we don't have to limit ourselves to reporting counters
only globally to the Qdisc/interface, especially if the device has more
detailed reporting (per traffic class), since the more detailed info is
valuable for debugging and can help identifying who is exceeding its
time slot.
But on the other hand, some devices may not be able to report both per
TC and global stats.
So we end up reporting both ways, and use the good old ethtool_put_stat()
strategy to determine which statistics are supported by this NIC.
Statistics which aren't set are simply not reported to netlink. For this
reason, we need something dynamic (a nlattr nest) to be reported through
TCA_STATS_APP, and not something daft like the fixed-size and
inextensible struct tc_codel_xstats. A good model for xstats which are a
nlattr nest rather than a fixed struct seems to be cake.
# Global stats
$ tc -s qdisc show dev eth0 root
# Per-tc stats
$ tc -s class show dev eth0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be
able to report statistics (which is future work), it seems that we need
to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO)
multiplexing, and pass the command as part of the common portion of the
muxed structure.
Since we already have an "enable" variable in tc_taprio_qopt_offload,
refactor all drivers to check for "cmd" instead of "enable", and reject
every other command except "replace" and "destroy" - to be future proof.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_gro_complete() function only updates the skb fields related to GRO
and it always returns zero. All the 3 drivers which are using it
do not check for the return value either.
Change it to return void instead which simplifies its callers as
error handing becomes unnecessary.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the 'FLOW_DISSECTOR_KEY_META' key with a new 'l2_miss' field and
populate it from a field with the same name in the tc skb extension.
This field is set by the bridge driver for packets that incur an FDB or
MDB miss.
The next patch will extend the flower classifier to be able to match on
layer 2 misses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_del() from devlink_ops into newly introduced devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_fn_state_get/set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_fn_migratable_get/set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_fn_roce_get/set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_fn_hw_addr_get/set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_type_set() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move port_split/unsplit() from devlink_ops into newly introduced
devlink_port_ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In devlink, some of the objects have separate ops registered alongside
with the object itself. Port however have ops in devlink_ops structure.
For drivers what register multiple kinds of ports with different ops
this is not convenient. Introduce devlink_port_ops and a set
of functions that allow drivers to pass ops pointer during
port registration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the
frequent and parallel code path of all queues. So, r/w into this
single shared variable by many threads on different CPUs creates a
lot caching and memory overhead, hence perf regression. And, it's
not accurate due to the high volume concurrent r/w.
For example, a workload is iperf with 128 threads, and with RPS
enabled. We saw perf regression of 25% with the previous patch
adding the counters. And this patch eliminates the regression.
Since the error path of mana_poll_rx_cq() already has warnings, so
keeping the counter and convert it to a per-queue variable is not
necessary. So, just remove this counter from this high frequency
code path.
Also, remove the tx_cqes counter for the same reason. We have
warnings & other counters for errors on that path, and don't need
to count every normal cqe processing.
Cc: stable@vger.kernel.org
Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.
A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.
tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.
Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.
When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]
This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().
If this counter is not zero, tcp_disconnect() returns an error.
This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.
Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make some minor spelling corrections in comments.
Found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230526-devlink-spelling-v1-1-9a3e36cdebc8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently TCP_SYNQ_INTERVAL is defined but never used.
According to "git log -S TCP_SYNQ_INTERVAL net-next/main" it seems
the last references to TCP_SYNQ_INTERVAL were removed by 2015
commit fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/raw.c
3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
c85be08fc4fa ("raw: Stop using RTO_ONLINK.")
https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/freescale/fec_main.c
9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.
This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044a8 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All commands are called holding instance lock. Remove the outdated
comment that says otherwise.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.
The MSG_DONTROUTE and SOCK_LOCALROUTE cases were already handled by
raw_sendmsg() (SOCK_LOCALROUTE was handled by the RT_CONN_FLAGS*()
macros called by get_rtconn_flags()). However, opt.is_strictroute
wasn't taken into account. Therefore, a side effect of this patch is to
now honour opt.is_strictroute, and thus align raw_sendmsg() with
ping_v4_sendmsg() and udp_sendmsg().
Since raw_sendmsg() was the only user of get_rtconn_flags(), we can now
remove this function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a new helper to figure out the correct route scope to use on TX,
depending on socket configuration, ancillary data and send flags.
Use this new helper to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag.
The objective is to eventually remove RTO_ONLINK, which will allow
converting .flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip_append_page() is no longer used with the removal of udp_sendpage(), so
remove it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fold do_tcp_sendpages() into its last remaining caller,
tcp_sendpage_locked().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_ring_[un]lock() use in_softirq() to decide which
spin lock variant to use, and when they are called in the
context with in_softirq() being false, spin_lock_bh() is
called in page_pool_ring_lock() while spin_unlock() is
called in page_pool_ring_unlock(), because spin_lock_bh()
has disabled the softirq in page_pool_ring_lock(), which
causes inconsistency for spin lock pair calling.
This patch fixes it by returning in_softirq state from
page_pool_producer_lock(), and use it to decide which
spin lock variant to use in page_pool_producer_unlock().
As pool->ring has both producer and consumer lock, so
rename it to page_pool_producer_[un]lock() to reflect
the actual usage. Also move them to page_pool.c as they
are only used there, and remove the 'inline' as the
compiler may have better idea to do inlining or not.
Fixes: 7886244736a4 ("net: page_pool: Add bulk support for ptr_ring")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The read_skb() logic is incrementing the tcp->copied_seq which is used for
among other things calculating how many outstanding bytes can be read by
the application. This results in application errors, if the application
does an ioctl(FIONREAD) we return zero because this is calculated from
the copied_seq value.
To fix this we move tcp->copied_seq accounting into the recv handler so
that we update these when the recvmsg() hook is called and data is in
fact copied into user buffers. This gives an accurate FIONREAD value
as expected and improves ACK handling. Before we were calling the
tcp_rcv_space_adjust() which would update 'number of bytes copied to
user in last RTT' which is wrong for programs returning SK_PASS. The
bytes are only copied to the user when recvmsg is handled.
Doing the fix for recvmsg is straightforward, but fixing redirect and
SK_DROP pkts is a bit tricker. Build a tcp_psock_eat() helper and then
call this from skmsg handlers. This fixes another issue where a broken
socket with a BPF program doing a resubmit could hang the receiver. This
happened because although read_skb() consumed the skb through sock_drop()
it did not update the copied_seq. Now if a single reccv socket is
redirecting to many sockets (for example for lb) the receiver sk will be
hung even though we might expect it to continue. The hang comes from
not updating the copied_seq numbers and memory pressure resulting from
that.
We have a slight layer problem of calling tcp_eat_skb even if its not
a TCP socket. To fix we could refactor and create per type receiver
handlers. I decided this is more work than we want in the fix and we
already have some small tweaks depending on caller that use the
helper skb_bpf_strparser(). So we extend that a bit and always set
the strparser bit when it is in use and then we can gate the
seq_copied updates on this.
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-9-john.fastabend@gmail.com
|
|
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in b0355dbbf13c,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix compiler warnings on btnxpuart
- Fix potential double free on hci_conn_unlink
- Fix UAF on hci_conn_hash_flush
* tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btnxpuart: Fix compiler warnings
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
Bluetooth: Fix UAF in hci_conn_hash_flush again
Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
Bluetooth: Fix potential double free caused by hci_conn_unlink
====================
Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preparatory commit to remove the field. The field was
previously shared between proc fs and BPF UDP socket iterators. As the
follow-up commits will decouple the implementation for the iterators,
remove the field. As for BPF socket iterator, filtering of sockets is
exepected to be done in BPF programs.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20230519225157.760788-5-aditi.ghag@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Commit 06149746e720 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e167e ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.
Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No functional changes intended. The new helper will be used
by the MPTCP protocol in the next patch to avoid duplicating
a few LoC.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicts:
drivers/net/ethernet/freescale/fec_main.c
6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
