summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2025-05-20bnxt_en: Fix netdev locking in ULP IRQ functionsMichael Chan
netdev_lock is already held when calling bnxt_ulp_irq_stop() and bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock, the original code was rtnl_dereference() to indicate that rtnl_lock was already held. rcu_dereference_protected() is the correct conversion after replacing rtnl_lock with netdev_lock. Add a new helper netdev_lock_dereference() similar to rtnl_dereference(). Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: let lockdep compare instance locksJakub Kicinski
AFAIU always returning -1 from lockdep's compare function basically disables checking of dependencies between given locks. Try to be a little more precise about what guarantees that instance locks won't deadlock. Right now we only nest them under protection of rtnl_lock. Mostly in unregister_netdevice_many() and dev_close_many(). Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-19queue_api: reduce risk of name collision over txqGur Stavi
Rename local variable in macros from txq to _txq. When macro parameter get_desc is expended it is likely to have a txq token that refers to a different txq variable at the caller's site. Signed-off-by: Gur Stavi <gur.stavi@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/95b60d218f004308486d92ed17c8cc6f28bac09d.1747559621.git.gur.stavi@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16net: rfs: add sock_rps_delete_flow() helperEric Dumazet
RFS can exhibit lower performance for workloads using short-lived flows and a small set of 4-tuple. This is often the case for load-testers, using a pair of hosts, if the server has a single listener port. Typical use case : Server : tcp_crr -T128 -F1000 -6 -U -l30 -R 14250 Client : tcp_crr -T128 -F1000 -6 -U -l30 -c -H server | grep local_throughput This is because RFS global hash table contains stale information, when the same RSS key is recycled for another socket and another cpu. Make sure to undo the changes and go back to initial state when a flow is disconnected. Performance of the above test is increased by 22 %, going from 372604 transactions per second to 457773. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Octavian Purdila <tavip@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Link: https://patch.msgid.link/20250515100354.3339920-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-13net: enable driver support for netmem TXMina Almasry
Drivers need to make sure not to pass netmem dma-addrs to the dma-mapping API in order to support netmem TX. Add helpers and netmem_dma_*() helpers that enables special handling of netmem dma-addrs that drivers can use. Document in netmem.rst what drivers need to do to support netmem TX. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250508004830.4100853-7-almasrymina@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13net: devmem: Implement TX pathMina Almasry
Augment dmabuf binding to be able to handle TX. Additional to all the RX binding, we also create tx_vec needed for the TX path. Provide API for sendmsg to be able to send dmabufs bound to this device: - Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from. - MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf. Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY implementation, while disabling instances where MSG_ZEROCOPY falls back to copying. We additionally pipe the binding down to the new zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems instead of the traditional page netmems. We also special case skb_frag_dma_map to return the dma-address of these dmabuf net_iovs instead of attempting to map pages. The TX path may release the dmabuf in a context where we cannot wait. This happens when the user unbinds a TX dmabuf while there are still references to its netmems in the TX path. In that case, the netmems will be put_netmem'd from a context where we can't unmap the dmabuf, Resolve this by making __net_devmem_dmabuf_binding_free schedule_work'd. Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat of the implementation came from devmem TCP RFC v1[1], which included the TX path, but Stan did all the rebasing on top of netmem/net_iov. Cc: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13net: add get_netmem/put_netmem supportMina Almasry
Currently net_iovs support only pp ref counts, and do not support a page ref equivalent. This is fine for the RX path as net_iovs are used exclusively with the pp and only pp refcounting is needed there. The TX path however does not use pp ref counts, thus, support for get_page/put_page equivalent is needed for netmem. Support get_netmem/put_netmem. Check the type of the netmem before passing it to page or net_iov specific code to obtain a page ref equivalent. For dmabuf net_iovs, we obtain a ref on the underlying binding. This ensures the entire binding doesn't disappear until all the net_iovs have been put_netmem'ed. We do not need to track the refcount of individual dmabuf net_iovs as we don't allocate/free them from a pool similar to what the buddy allocator does for pages. This code is written to be extensible by other net_iov implementers. get_netmem/put_netmem will check the type of the netmem and route it to the correct helper: pages -> [get|put]_page() dmabuf net_iovs -> net_devmem_[get|put]_net_iov() new net_iovs -> new helpers Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13netmem: add niov->type attribute to distinguish different net_iov typesMina Almasry
Later patches in the series adds TX net_iovs where there is no pp associated, so we can't rely on niov->pp->mp_ops to tell what is the type of the net_iov. Add a type enum to the net_iov which tells us the net_iov type. Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250508004830.4100853-2-almasrymina@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-12netlink: fix policy dump for int with validation callbackJakub Kicinski
Recent devlink change added validation of an integer value via NLA_POLICY_VALIDATE_FN, for sparse enums. Handle this in policy dump. We can't extract any info out of the callback, so report only the type. Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes") Reported-by: syzbot+01eb26848144516e7f0a@syzkaller.appspotmail.com Link: https://patch.msgid.link/20250509212751.1905149-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-12net: mana: Add support for auxiliary device servicing eventsShiraz Saleem
Handle soc servicing events which require the rdma auxiliary device resources to be cleaned up during a suspend, and re-initialized during a resume. Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com> Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1746633545-17653-5-git-send-email-kotaranov@linux.microsoft.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-05-12net: mana: Probe rdma device in mana driverKonstantin Taranov
Initialize gdma device for rdma inside mana module. For each gdma device, initialize an auxiliary ib device. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1746633545-17653-2-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-05-09net: dsa: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()Vladimir Oltean
New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert DSA to the new API, so that the ndo_eth_ioctl() path can be removed completely. Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set() calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and dsa_user_hwtstamp_set(). Due to the fact that the underlying ifreq type changes to kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end, all hooked up directly or indirectly, must also be converted all at once. The conversion also updates the comment from dsa_port_supports_hwtstamp(), which is no longer true because kernel_hwtstamp_config is kernel memory and does not need copy_to_user(). I've deliberated whether it is necessary to also update "err != -EOPNOTSUPP" to a more general "!err", but all drivers now either return 0 or -EOPNOTSUPP. The existing logic from the ocelot_ioctl() function, to avoid configuring timestamping if the PHY supports the operation, is obsoleted by more advanced core logic in dev_set_hwtstamp_phylib(). This is only a partial preparation for proper PHY timestamping support. None of these switch driver currently sets up PTP traps for PHY timestamping, so setting dev->see_all_hwtstamp_requests is not yet necessary and the conversion is relatively trivial. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-09net_sched: Flush gso_skb list too during ->change()Cong Wang
Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Reported-by: Will <willsroot@protonmail.com> Reported-by: Savy <savy@syst3mfailure.io> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-08Merge tag 'for-net-2025-05-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags - hci_event: Fix not using key encryption size when its known * tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix not using key encryption size when its known Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags ==================== Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-09wifi: mac80211: Update MCS15 support in link_confMohan Kumar G
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element contains MCS15 Disable subfield as the sixth bit, which is set when MCS15 support is not enabled. Get MCS15 support from EHT operation params and add it in link_conf so that driver can use this value to know if EHT-MCS 15 reception is enabled. Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com> Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com [remove pointless !! for bool assignment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc6). No conflicts. Adjacent changes: net/core/dev.c: 08e9f2d584c4 ("net: Lock netdevices during dev_shutdown") a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-08Bluetooth: hci_event: Fix not using key encryption size when its knownLuiz Augusto von Dentz
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap: Check encryption key size on incoming connection") introduced a check for l2cap_check_enc_key_size which checks for hcon->enc_key_size which may not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending. If the key encryption size is known, due previously reading it using HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk structures so the next time the encryption is changed their values are used as conn->enc_key_size thus avoiding the racing against HCI_OP_READ_ENC_KEY_SIZE. Now that the enc_size is stored as part of key the information the code then attempts to check that there is no downgrade of security if HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been previously stored. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061 Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063 Fixes: 522e9ed157e3 ("Bluetooth: l2cap: Check encryption key size on incoming connection") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-08net: export a helper for adding up queue statsJakub Kicinski
Older drivers and drivers with lower queue counts often have a static array of queues, rather than allocating structs for each queue on demand. Add a helper for adding up qstats from a queue range. Expectation is that driver will pass a queue range [netdev->real_num_*x_queues, MAX). It was tempting to always use num_*x_queues as the end, but virtio seems to clamp its queue count after allocating the netdev. And this way we can trivaly reuse the helper for [0, real_..). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06Merge tag 'wireless-next-2025-05-06' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless features, notably * stack - free SKBTX_WIFI_STATUS flag - fixes for VLAN multicast in multi-link - improve codel parameters (revert some old twiddling) * ath12k - Enable AHB support for IPQ5332. - Add monitor interface support to QCN9274. - Add MLO support to WCN7850. - Add 802.11d scan offload support to WCN7850. * ath11k - Restore hibernation support * iwlwifi - EMLSR on two 5 GHz links * mwifiex - cleanups/refactoring along with many other small features/cleanups * tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits) Revert "wifi: iwlwifi: clean up config macro" wifi: iwlwifi: move phy_filters to fw_runtime wifi: iwlwifi: pcie: make sure to lock rxq->read wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2 wifi: iwlwifi: clean up config macro wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status() wifi: iwlwifi: mld: rx: simplify channel handling wifi: iwlwifi: clean up band in RX metadata wifi: iwlwifi: mld: skip unknown FW channel load values wifi: iwlwifi: define API for external FSEQ images wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands wifi: iwlwifi: mld: use cfg80211_chandef_get_width() wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return wifi: iwlwifi: mld: clarify variable type wifi: iwlwifi: pcie: add support for the reset handshake in MSI wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled wifi: mac80211: restructure tx profile retrieval for MLO MBSSID wifi: nl80211: add link id of transmitted profile for MLO MBSSID wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values wifi: mac80211: update ML STA with EML capabilities ... ==================== Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-06devlink: avoid param type value translationsJiri Pirko
Assign DEVLINK_PARAM_TYPE_* enum values to DEVLINK_VAR_ATTR_TYPE_* to ensure the same values are used internally and in UAPI. Benefit from that by removing the value translations. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250505114513.53370-4-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05sctp: Remove unused sctp_assoc_del_peer and sctp_chunk_iifDr. David Alan Gilbert
sctp_assoc_del_peer() last use was removed in 2015 by commit 73e6742027f5 ("sctp: Do not try to search for the transport twice") which now uses rm_peer instead of del_peer. sctp_chunk_iif() last use was removed in 2016 by commit 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20250501233815.99832-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05strparser: Remove unused __strp_unpauseDr. David Alan Gilbert
The last use of __strp_unpause() was removed in 2022 by commit 84c61fe1a75b ("tls: rx: do not use the standard strparser") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250501002402.308843-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-29ip: load balance tcp connections to single dst addr and portWillem de Bruijn
Load balance new TCP connections across nexthops also when they connect to the same service at a single remote address and port. This affects only port-based multipath hashing: fib_multipath_hash_policy 1 or 3. Local connections must choose both a source address and port when connecting to a remote service, in ip_route_connect. This "chicken-and-egg problem" (commit 2d7192d6cbab ("ipv4: Sanitize and simplify ip_route_{connect,newports}()")) is resolved by first selecting a source address, by looking up a route using the zero wildcard source port and address. As a result multiple connections to the same destination address and port have no entropy in fib_multipath_hash. This is not a problem when forwarding, as skb-based hashing has a 4-tuple. Nor when establishing UDP connections, as autobind there selects a port before reaching ip_route_connect. Load balance also TCP, by using a random port in fib_multipath_hash. Port assignment in inet_hash_connect is not atomic with ip_route_connect. Thus ports are unpredictable, effectively random. Implementation details: Do not actually pass a random fl4_sport, as that affects not only hashing, but routing more broadly, and can match a source port based policy route, which existing wildcard port 0 will not. Instead, define a new wildcard flowi flag that is used only for hashing. Selecting a random source is equivalent to just selecting a random hash entirely. But for code clarity, follow the normal 4-tuple hash process and only update this field. fib_multipath_hash can be reached with zero sport from other code paths, so explicitly pass this flowi flag, rather than trying to infer this case in the function itself. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-29ipv4: prefer multipath nexthop that matches source addressWillem de Bruijn
With multipath routes, try to ensure that packets leave on the device that is associated with the source address. Avoid the following tcpdump example: veth0 Out IP 10.1.0.2.38640 > 10.2.0.3.8000: Flags [S] veth1 Out IP 10.1.0.2.38648 > 10.2.0.3.8000: Flags [S] Which can happen easily with the most straightforward setup: ip addr add 10.0.0.1/24 dev veth0 ip addr add 10.1.0.1/24 dev veth1 ip route add 10.2.0.3 nexthop via 10.0.0.2 dev veth0 \ nexthop via 10.1.0.2 dev veth1 This is apparently considered WAI, based on the comment in ip_route_output_key_hash_rcu: * 2. Moreover, we are allowed to send packets with saddr * of another iface. --ANK It may be ok for some uses of multipath, but not all. For instance, when using two ISPs, a router may drop packets with unknown source. The behavior occurs because tcp_v4_connect makes three route lookups when establishing a connection: 1. ip_route_connect calls to select a source address, with saddr zero. 2. ip_route_connect calls again now that saddr and daddr are known. 3. ip_route_newports calls again after a source port is also chosen. With a route with multiple nexthops, each lookup may make a different choice depending on available entropy to fib_select_multipath. So it is possible for 1 to select the saddr from the first entry, but 3 to select the second entry. Leading to the above situation. Address this by preferring a match that matches the flowi4 saddr. This will make 2 and 3 make the same choice as 1. Continue to update the backup choice until a choice that matches saddr is found. Do this in fib_select_multipath itself, rather than passing an fl4_oif constraint, to avoid changing non-multipath route selection. Commit e6b45241c57a ("ipv4: reset flowi parameters on route connect") shows how that may cause regressions. Also read ipv4.sysctl_fib_multipath_use_neigh only once. No need to refresh in the loop. This does not happen in IPv6, which performs only one lookup. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424143549.669426-2-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-28net: sched: generalize check for no-queue qdisc on TX queueJesper Dangaard Brouer
The "noqueue" qdisc can either be directly attached, or get default attached if net_device priv_flags has IFF_NO_QUEUE. In both cases, the allocated Qdisc structure gets it's enqueue function pointer reset to NULL by noqueue_init() via noqueue_qdisc_ops. This is a common case for software virtual net_devices. For these devices with no-queue, the transmission path in __dev_queue_xmit() will bypass the qdisc layer. Directly invoking device drivers ndo_start_xmit (via dev_hard_start_xmit). In this mode the device driver is not allowed to ask for packets to be queued (either via returning NETDEV_TX_BUSY or stopping the TXQ). The simplest and most reliable way to identify this no-queue case is by checking if enqueue == NULL. The vrf driver currently open-codes this check (!qdisc->enqueue). While functionally correct, this low-level detail is better encapsulated in a dedicated helper for clarity and long-term maintainability. To make this behavior more explicit and reusable, this patch introduce a new helper: qdisc_txq_has_no_queue(). Helper will also be used by the veth driver in the next patch, which introduces optional qdisc-based backpressure. This is a non-functional change. Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/174559293172.827981.7583862632045264175.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-25Bluetooth: hci_conn: Fix not setting timeout for BIG Create SyncLuiz Augusto von Dentz
BIG Create Sync requires the command to just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the BIG sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-25Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast ReceiverLuiz Augusto von Dentz
Broadcast Receiver requires creating PA sync but the command just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the PA sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-24xsk: Fix offset calculation in unaligned modee.kubanski
Bring back previous offset calculation behaviour in AF_XDP unaligned umem mode. In unaligned mode, upper 16 bits should contain data offset, lower 48 bits should contain only specific chunk location without offset. Remove pool->headroom duplication into 48bit address. Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com> Fixes: bea14124bacb ("xsk: Get rid of xdp_buff_xsk::orig_addr") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24xsk: Fix race condition in AF_XDP generic RX pathe.kubanski
Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop. Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com> Fixes: bf0bdd1343efb ("xdp: fix race on generic receive path") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24rxrpc: Remove deadcodeDr. David Alan Gilbert
Remove three functions that are no longer used. rxrpc_get_txbuf() last use was removed by 2020's commit 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work") rxrpc_kernel_get_epoch() last use was removed by 2020's commit 44746355ccb1 ("afs: Don't get epoch from a server because it may be ambiguous") rxrpc_kernel_set_max_life() last use was removed by 2023's commit db099c625b13 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel") Both of the rxrpc_kernel_* functions were documented. Remove that documentation as well as the code. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/20250422235147.146460-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24ipv6: Protect nh->f6i_list with spinlock and flag.Kuniyuki Iwashima
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT. Then, we may be going to add a route tied to a dying nexthop. The nexthop itself is not freed during the RCU grace period, but if we link a route after __remove_nexthop_fib() is called for the nexthop, the route will be leaked. To avoid the race between IPv6 route addition under RCU vs nexthop deletion under RTNL, let's add a dead flag and protect it and nh->f6i_list with a spinlock. __remove_nexthop_fib() acquires the nexthop's spinlock and sets false to nh->dead, then calls ip6_del_rt() for the linked route one by one without the spinlock because fib6_purge_rt() acquires it later. While adding an IPv6 route, fib6_add() acquires the nexthop lock and checks the dead flag just before inserting the route. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250418000443.43734-15-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24ipv6: Defer fib6_purge_rt() in fib6_add_rt2node() to fib6_add().Kuniyuki Iwashima
The next patch adds per-nexthop spinlock which protects nh->f6i_list. When rt->nh is not NULL, fib6_add_rt2node() will be called under the lock. fib6_add_rt2node() could call fib6_purge_rt() for another route, which could holds another nexthop lock. Then, deadlock could happen between two nexthops. Let's defer fib6_purge_rt() after fib6_add_rt2node(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20250418000443.43734-14-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24ipv6: Protect fib6_link_table() with spinlock.Kuniyuki Iwashima
We will get rid of RTNL from RTM_NEWROUTE and SIOCADDRT. If the request specifies a new table ID, fib6_new_table() is called to create a new routing table. Two concurrent requests could specify the same table ID, so we need a lock to protect net->ipv6.fib_table_hash[h]. Let's add a spinlock to protect the hash bucket linkage. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20250418000443.43734-13-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-23wifi: mac80211: restructure tx profile retrieval for MLO MBSSIDRameshkumar Sundaram
For MBSSID, each vif (struct ieee80211_vif) stores another vif pointer for the transmitting profile of MBSSID set. This won't suffice for MLO as there may be multiple links, each of which can be part of different MBSSID sets. Hence the information needs to be stored per-link. Additionally, the transmitted profile itself may be part of an MLD hence storing vif will not suffice either. Fix MLO by storing an instance of struct ieee80211_bss_conf for each link. Modify following operations to reflect the above structure updates: - channel switch completion - BSS color change completion - Removing nontransmitted links in ieee80211_stop_mbssid() - drivers retrieving the transmitted link for beacon templates. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: nl80211: add link id of transmitted profile for MLO MBSSIDRameshkumar Sundaram
During non-transmitted (nontx) profile configuration, interface index of the transmitted (tx) profile is used to retrieve the wireless device (wdev) associated with it. With MLO, this 'wdev' may be part of an MLD with more than one link, hence only interface index is not sufficient anymore to retrieve the correct tx profile. Add a new attribute to configure link id of tx profile. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: mac80211: update ML STA with EML capabilitiesRamasamy Kaliappan
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities advertised during Association contains information such as EMLSR transition delay, padding delay and transition timeout values. Save the EML capabilities information that is received during station addition and capabilities update in ieee80211_sta so that drivers can use it for triggering EMLSR operation. Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: cfg80211: Add support to get EMLSR capabilities of non-AP MLDRamasamy Kaliappan
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD with multiple receive chains to listen on one or more EMLSR links when the corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link single-radio (EMLSR) operation)] An MLD which intends to enable EMLSR operations will set the EML Capabilities Present subfield to 1 and shall set the EMLSR Support subfield in the Common Info field of the Basic Multi-Link element to 1 in all Management frames that include the Basic Multi-Link element except Authentication frames. EML capabilities contains information such as EML Transition timeout, Padding delay and Transition delay. These fields needs to updated to drivers to trigger EMLSR operation and to transmit and receive initial control frame and data frames. Add support to receive EML Capabilities subfield that non-AP MLD advertises during (re)association request and send it to underlying drivers during ADD/SET station. Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com [accept EMLSR capabilities only for unassoc AP STA] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23Revert "mac80211: Dynamically set CoDel parameters per station"Toke Høiland-Jørgensen
This reverts commit 484a54c2e597dbc4ace79c1687022282905afba0. The CoDel parameter change essentially disables CoDel on slow stations, with some questionable assumptions, as Dave pointed out in [0]. Quoting from there: But here are my pithy comments as to why this part of mac80211 is so wrong... static void sta_update_codel_params(struct sta_info *sta, u32 thr) { - if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) { 1) sta->local->num_sta is the number of associated, rather than active, stations. "Active" stations in the last 50ms or so, might have been a better thing to use, but as most people have far more than that associated, we end up with really lousy codel parameters, all the time. Mistake numero uno! 2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016. - sta->cparams.target = MS2TIME(50); This, by itself, was probably not too bad. 30ms might have been better, at the time, when we were battling powersave etc, but 20ms was enough, really, to cover most scenarios, even where we had low rate 2Ghz multicast to cope with. Even then, codel has a hard time finding any sane drop rate at all, with a target this high. - sta->cparams.interval = MS2TIME(300); But this was horrible, a total mistake, that is leading to codel being completely ineffective in almost any scenario on clients or APS. 100ms, even 80ms, here, would be vastly better than this insanity. I'm seeing 5+seconds of delay accumulated in a bunch of otherwise happily fq-ing APs.... 100ms of observed jitter during a flow is enough. Certainly (in 2016) there were interactions with powersave that I did not understand, and still don't, but if you are transmitting in the first place, powersave shouldn't be a problemmmm..... - sta->cparams.ecn = false; At the time we were pretty nervous about ecn, I'm kind of sanguine about it now, and reliably indicating ecn seems better than turning it off for any reason. [...] In production, on p2p wireless, I've had 8ms and 80ms for target and interval for years now, and it works great. I think Dave's arguments above are basically sound on the face of it, and various experimentation with tighter CoDel parameters in the OpenWrt community have show promising results[1]. So I don't think there's any reason to keep this parameter fiddling; hence this revert. [0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/ [1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130 Suggested-By: Dave Taht <dave.taht@gmail.com> In-memory-of: Dave Taht <dave.taht@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: cfg80211/mac80211: remove more 5/10 MHz codeJohannes Berg
We still have ieee80211_chandef_rate_flags() and all that, but all the users seem pretty much broken (deflink, etc.) Remove all the code. It's been two years since last anyone even vaguely entertained the notion of looking at this and fixing it. Link: https://patch.msgid.link/20250329221419.c31da7ae8c84.I1a3a4b6008134d66ca75a5bdfc004f4594da8145@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: free SKBTX_WIFI_STATUS skb tx_flags flagJohannes Berg
Jason mentioned at netdevconf that we've run out of tx_flags in the skb_shinfo(). Gain one bit back by removing the wifi bit. We can do that because the only userspace application for it (hostapd) doesn't change the setting on the socket, it just uses different sockets, and normally doesn't even use this any more, sending the frames over nl80211 instead. Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20250313134942.52ff54a140ec.If390bbdc46904cf451256ba989d7a056c457af6e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-22xdp: create locked/unlocked instances of xdp redirect target settersJoshua Washington
Commit 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") introduces the netdev lock to xdp_set_features_flag(). The change includes a _locked version of the method, as it is possible for a driver to have already acquired the netdev lock before calling this helper. However, the same applies to xdp_features_(set|clear)_redirect_flags(), which ends up calling the unlocked version of xdp_set_features_flags() leading to deadlocks in GVE, which grabs the netdev lock as part of its suspend, reset, and shutdown processes: [ 833.265543] WARNING: possible recursive locking detected [ 833.270949] 6.15.0-rc1 #6 Tainted: G E [ 833.276271] -------------------------------------------- [ 833.281681] systemd-shutdow/1 is trying to acquire lock: [ 833.287090] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: xdp_set_features_flag+0x29/0x90 [ 833.295470] [ 833.295470] but task is already holding lock: [ 833.301400] ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve] [ 833.309508] [ 833.309508] other info that might help us debug this: [ 833.316130] Possible unsafe locking scenario: [ 833.316130] [ 833.322142] CPU0 [ 833.324681] ---- [ 833.327220] lock(&dev->lock); [ 833.330455] lock(&dev->lock); [ 833.333689] [ 833.333689] *** DEADLOCK *** [ 833.333689] [ 833.339701] May be due to missing lock nesting notation [ 833.339701] [ 833.346582] 5 locks held by systemd-shutdow/1: [ 833.351205] #0: ffffffffa9c89130 (system_transition_mutex){+.+.}-{4:4}, at: __se_sys_reboot+0xe6/0x210 [ 833.360695] #1: ffff93b399e5c1b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xb4/0x1f0 [ 833.369144] #2: ffff949d19a471b8 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xc2/0x1f0 [ 833.377603] #3: ffffffffa9eca050 (rtnl_mutex){+.+.}-{4:4}, at: gve_shutdown+0x33/0x90 [gve] [ 833.386138] #4: ffff949d2b148c68 (&dev->lock){+.+.}-{4:4}, at: gve_shutdown+0x44/0x90 [gve] Introduce xdp_features_(set|clear)_redirect_target_locked() versions which assume that the netdev lock has already been acquired before setting the XDP feature flag and update GVE to use the locked version. Fixes: 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250422011643.3509287-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-22net: 802: Remove unused p8022 codeDr. David Alan Gilbert
p8022.c defines two external functions, register_8022_client() and unregister_8022_client(), the last use of which was removed in 2018 by commit 7a2e838d28cf ("staging: ipx: delete it from the tree") Remove the p8022.c file, it's corresponding header, and glue surrounding it. There was one place the header was included in vlan.c but it didn't use the functions it declared. There was a comment in net/802/Makefile about checking against net/core/Makefile, but that's at least 20 years old and there's no sign of net/core/Makefile mentioning it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-22vxlan: Convert FDB table to rhashtableIdo Schimmel
FDB entries are currently stored in a hash table with a fixed number of buckets (256), resulting in performance degradation as the number of entries grows. Solve this by converting the driver to use rhashtable which maintains more or less constant performance regardless of the number of entries. Measured transmitted packets per second using a single pktgen thread with varying number of entries when the transmitted packet always hits the default entry (worst case): Number of entries | Improvement ------------------|------------ 1k | +1.12% 4k | +9.22% 16k | +55% 64k | +585% 256k | +2460% In addition, the change reduces the size of the VXLAN device structure from 2584 bytes to 672 bytes. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250415121143.345227-16-idosch@nvidia.com Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22vxlan: Add a linked list of FDB entriesIdo Schimmel
Currently, FDB entries are stored in a hash table with a fixed number of buckets. The table is used for both lookups and entry traversal. Subsequent patches will convert the table to rhashtable which is not suitable for entry traversal. In preparation for this conversion, add FDB entries to a linked list. Subsequent patches will convert the driver to use this list when traversing entries during dump, flush, etc. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250415121143.345227-8-idosch@nvidia.com Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22vxlan: Use a single lock to protect the FDB tableIdo Schimmel
Currently, the VXLAN driver stores FDB entries in a hash table with a fixed number of buckets (256). Subsequent patches are going to convert this table to rhashtable with a linked list for entry traversal, as rhashtable is more scalable. In preparation for this conversion, move from a per-bucket spin lock to a single spin lock that protects the entire FDB table. The per-bucket spin locks were introduced by commit fe1e0713bbe8 ("vxlan: Use FDB_HASH_SIZE hash_locks to reduce contention") citing "huge contention when inserting/deleting vxlan_fdbs into the fdb_head". It is not clear from the commit message which code path was holding the spin lock for long periods of time, but the obvious suspect is the FDB cleanup routine (vxlan_cleanup()) that periodically traverses the entire table in order to delete aged-out entries. This will be solved by subsequent patches that will convert the FDB cleanup routine to traverse the linked list of FDB entries using RCU, only acquiring the spin lock when deleting an aged-out entry. The change reduces the size of the VXLAN device structure from 3600 bytes to 2576 bytes. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250415121143.345227-7-idosch@nvidia.com Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-20RDMA/mana_ib: Add support of 4M, 1G, and 2G pagesKonstantin Taranov
Check PF capability flag whether the 4M, 1G, and 2G pages are supported. Add these pages sizes to mana_ib, if supported. Define possible page sizes in enum gdma_page_type and remove unused enum atb_page_size. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-20RDMA/mana_ib: support of the zero based MRsKonstantin Taranov
Add IB_ZERO_BASED to the valid flags and use the corresponding MR creation request for the zero based memory. Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-04-17net: Delete the outer () duplicated of macro SOCK_SKB_CB_OFFSET definitionZijun Hu
For macro SOCK_SKB_CB_OFFSET definition, Delete the outer () duplicated. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250416-fix_net-v1-1-d544c9f3f169@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-24 16:25:53 +0000