| Age | Commit message (Collapse) | Author |
|---|
|
Add TIPC_NL_MEDIA_GET command to the new tipc netlink API.
This command supports dumping all information about all defined
media as well as getting all information about a specific media.
The information about a media includes name and link properties.
Netlink logical layout of media get response message:
-> media
-> name
-> link properties
-> tolerance
-> priority
-> window
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_LINK_RESET_STATS command to the new netlink API.
This command resets the link statistics for a particular link.
Netlink logical layout of link reset message:
-> link
-> name
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_LINK_SET to the new tipc netlink API.
This command can set one or more link properties for a particular
link.
Netlink logical layout of link set message:
-> link
-> name
-> properties
[ -> tolerance ]
[ -> priority ]
[ -> window ]
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_LINK_GET command to the new tipc netlink API.
This command supports dumping all information about all links
(including the broadcast link) or getting all information about a
specific link (not the broadcast link).
The information about a link includes name, transmission info,
properties and link statistics.
As the tipc broadcast link is special we unfortunately have to treat
it specially. It is a deliberate decision not to abstract the
broadcast link on this (API) level.
Netlink logical layout of link response message:
-> port
-> name
-> MTU
-> RX
-> TX
-> up flag
-> active flag
-> properties
-> priority
-> tolerance
-> window
-> statistics
-> rx_info
-> rx_fragments
-> rx_fragmented
-> rx_bundles
-> rx_bundled
-> tx_info
-> tx_fragments
-> tx_fragmented
-> tx_bundles
-> tx_bundled
-> msg_prof_tot
-> msg_len_cnt
-> msg_len_tot
-> msg_len_p0
-> msg_len_p1
-> msg_len_p2
-> msg_len_p3
-> msg_len_p4
-> msg_len_p5
-> msg_len_p6
-> rx_states
-> rx_probes
-> rx_nacks
-> rx_deferred
-> tx_states
-> tx_probes
-> tx_nacks
-> tx_acks
-> retransmitted
-> duplicates
-> link_congs
-> max_queue
-> avg_queue
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_PUBL_GET command to the new tipc netlink API.
This command supports dumping of all publications for a specific
socket.
Netlink logical layout of request message:
-> socket
-> reference
Netlink logical layout of response message:
-> publication
-> type
-> lower
-> upper
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_SOCK_GET command to the new tipc netlink API.
This command supports dumping of all available sockets with their
associated connection or publication(s). It could be extended to reply
with a single socket if the NLM_F_DUMP isn't set.
The information about a socket includes reference, address, connection
information / publication information.
Netlink logical layout of response message:
-> socket
-> reference
-> address
[
-> connection
-> node
-> socket
[
-> connected flag
-> type
-> instance
]
]
[
-> publication flag
]
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_BEARER_SET command to the new tipc netlink API.
This command can set one or more link properties for a particular
bearer.
Netlink logical layout of bearer set message:
-> bearer
-> name
-> link properties
[ -> tolerance ]
[ -> priority ]
[ -> window ]
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TIPC_NL_BEARER_GET command to the new tipc netlink API.
This command supports dumping all data about all bearers or getting
all information about a specific bearer.
The information about a bearer includes name, link priorities and
domain.
Netlink logical layout of bearer get message:
-> bearer
-> name
Netlink logical layout of returned bearer information:
-> bearer
-> name
-> link properties
-> priority
-> tolerance
-> window
-> domain
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A new netlink API for tipc that can disable or enable a tipc bearer.
The new API is separated from the old API because of a bug in the
user space client (tipc-config). The problem is that older versions
of tipc-config has a very low receive limit and adding commands to
the legacy genl_opts struct causes the ctrl_getfamily() response
message to grow, subsequently breaking the tool.
The new API utilizes netlink policies for input validation. Where the
top-level netlink attributes are tipc-logical entities, like bearer.
The top level entities then contain nested attributes. In this case
a name, nested link properties and a domain.
Netlink commands implemented in this patch:
TIPC_NL_BEARER_ENABLE
TIPC_NL_BEARER_DISABLE
Netlink logical layout of bearer enable message:
-> bearer
-> name
[ -> domain ]
[
-> properties
-> priority
]
Netlink logical layout of bearer disable message:
-> bearer
-> name
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tc action allows to work with vlan tagged skbs. Two supported
sub-actions are header pop and header push.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KVM ia64 is no longer present so new applications shouldn't use them.
The main problem is that they most likely didn't work even before,
because of a conflict in the #defines:
#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
The argument to KVM_SET_GUEST_DEBUG is:
struct kvm_guest_debug {
__u32 control;
__u32 pad;
struct kvm_guest_debug_arch arch;
};
struct kvm_guest_debug_arch {
};
meaning that sizeof(struct kvm_guest_debug) == sizeof(void *) == 8
and KVM_SET_GUEST_DEBUG == KVM_IA64_VCPU_SET_STACK.
KVM_SET_GUEST_DEBUG is handled in virt/kvm/kvm_main.c before even calling
kvm_arch_vcpu_ioctl (which would have handled KVM_IA64_VCPU_SET_STACK),
so KVM_IA64_VCPU_SET_STACK would just return -EINVAL.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
device replace could fail due to another running scrub process or any
other errors btrfs_scrub_dev() may hit, but this failure doesn't get
returned to userspace.
The following steps could reproduce this issue
mkfs -t btrfs -f /dev/sdb1 /dev/sdb2
mount /dev/sdb1 /mnt/btrfs
while true; do btrfs scrub start -B /mnt/btrfs >/dev/null 2>&1; done &
btrfs replace start -Bf /dev/sdb2 /dev/sdb3 /mnt/btrfs
# if this replace succeeded, do the following and repeat until
# you see this log in dmesg
# BTRFS: btrfs_scrub_dev(/dev/sdb2, 2, /dev/sdb3) failed -115
#btrfs replace start -Bf /dev/sdb3 /dev/sdb2 /mnt/btrfs
# once you see the error log in dmesg, check return value of
# replace
echo $?
Introduce a new dev replace result
BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS
to catch -EINPROGRESS explicitly and return other errors directly to
userspace.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
A process may exit, leaving an orphan lock in the lockspace.
This adds the capability for another process to acquire the
orphan lock. Acquiring the orphan just moves the lock from
the orphan list onto the acquiring process's list of locks.
An adopting process must specify the resource name and mode
of the lock it wants to adopt. If a matching lock is found,
the lock is moved to the caller's 's list of locks, and the
lkid of the lock is returned like the lkid of a new lock.
If an orphan with a different mode is found, then -EAGAIN is
returned. If no orphan lock is found on the resource, then
-ENOENT is returned. No async completion is used because
the result is immediately available.
Also, when orphans are purged, allow a zero nodeid to refer
to the local nodeid so the caller does not need to look up
the local nodeid.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Replace NL80211_ATTR_IFACE_SOCKET_OWNER attribute with more generic
NL80211_ATTR_SOCKET_OWNER that can be used with other commands
that interface creation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the necessary feature flags and a scan flag to support using
random MAC addresses for scan while unassociated.
The configuration for this supports an arbitrary MAC address
value and mask, so that any kind of configuration (e.g. fixed
OUI or full 46-bit random) can be requested. Full 46-bit random
is the default when no other configuration is passed.
Also add a small helper function to use the addr/mask correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new WoWLAN API to enable net-detect as a wake up trigger.
Net-detect allows the device to scan in the background while the
host is asleep to wake up the host system when a matching network
is found.
Reuse the scheduled scan attributes to specify how the scan is
performed while suspended and the matches that will trigger a
wake event.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Introduce commands to initiate and cancel TDLS channel-switching. Once
TDLS channel-switching is started, the lower level driver is responsible
for continually initiating channel-switch operations and returning to
the base (AP) channel to listen for beacons from time to time.
Upon cancellation of the channel-switch all communication between the
relevant TDLS peers will continue on the base channel.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Define some related TDLS protocol constants and advertise channel switch
support in the extended-capabilities IE when the feature bit is defined.
Actually supporting TDLS channel-switching also requires support for
some new nl80211 commands, to be introduced by future patches.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast
-- dm-stats will continue using these methods to avoid all the extra
suspend/resume logic that is not needed in order to quickly flush IO.
Introduce dm_internal_suspend_noflush() variant that actually calls the
mapped_device's target callbacks -- otherwise target-specific hooks are
avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common
code between dm_internal_{suspend_noflush,resume} and
dm_{suspend,resume} was factored out as __dm_{suspend,resume}.
Update dm_internal_{suspend_noflush,resume} to always take and release
the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be
aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond
accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to
be cleared. Add lockdep annotation to dm_suspend() and dm_resume().
The existing DM_SUSPEND_FLAG remains unchanged.
DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and
cleared by dm_internal_resume().
Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device
was already suspended when dm_internal_suspend_noflush() was called --
this can be thought of as a "nested suspend". A "nested suspend" can
occur with legacy userspace dm-thin code that might suspend all active
thin volumes before suspending the pool for resize.
But otherwise, in the normal dm-thin-pool suspend case moving forward:
the thin-pool will have DM_SUSPEND_FLAG set and all active thins from
that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set.
Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new
DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with
debugging (e.g. 'dmsetup info' will report an internally suspended
device accordingly).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
|
|
The DM thin-pool target now must undo the changes performed during
pool_presuspend() so introduce presuspend_undo hook in target_type.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
|
|
|
|
expose bpf_map_lookup_elem(), bpf_map_update_elem(), bpf_map_delete_elem()
map accessors to eBPF programs
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add new map type BPF_MAP_TYPE_ARRAY and its implementation
- optimized for fastest possible lookup()
. in the future verifier/JIT may recognize lookup() with constant key
and optimize it into constant pointer. Can optimize non-constant
key into direct pointer arithmetic as well, since pointers and
value_size are constant for the life of the eBPF program.
In other words array_map_lookup_elem() may be 'inlined' by verifier/JIT
while preserving concurrent access to this map from user space
- two main use cases for array type:
. 'global' eBPF variables: array of 1 element with key=0 and value is a
collection of 'global' variables which programs can use to keep the state
between events
. aggregation of tracing events into fixed set of buckets
- all array elements pre-allocated and zero initialized at init time
- key as an index in array and can only be 4 byte
- map_delete_elem() returns EINVAL, since elements cannot be deleted
- map_update_elem() replaces elements in an non-atomic way
(for atomic updates hashtable type should be used instead)
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add new map type BPF_MAP_TYPE_HASH and its implementation
- maps are created/destroyed by userspace. Both userspace and eBPF programs
can lookup/update/delete elements from the map
- eBPF programs can be called in_irq(), so use spin_lock_irqsave() mechanism
for concurrent updates
- key/value are opaque range of bytes (aligned to 8 bytes)
- user space provides 3 configuration attributes via BPF syscall:
key_size, value_size, max_entries
- map takes care of allocating/freeing key/value pairs
- map_update_elem() must fail to insert new element when max_entries
limit is reached to make sure that eBPF programs cannot exhaust memory
- map_update_elem() replaces elements in an atomic way
- optimized for speed of lookup() which can be called multiple times from
eBPF program which itself is triggered by high volume of events
. in the future JIT compiler may recognize lookup() call and optimize it
further, since key_size is constant for life of eBPF program
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the current meaning of BPF_MAP_UPDATE_ELEM syscall command is:
either update existing map element or create a new one.
Initially the plan was to add a new command to handle the case of
'create new element if it didn't exist', but 'flags' style looks
cleaner and overall diff is much smaller (more code reused), so add 'flags'
attribute to BPF_MAP_UPDATE_ELEM command with the following meaning:
#define BPF_ANY 0 /* create new element or update existing */
#define BPF_NOEXIST 1 /* create new element if it didn't exist */
#define BPF_EXIST 2 /* update existing element */
bpf_update_elem(fd, key, value, BPF_NOEXIST) call can fail with EEXIST
if element already exists.
bpf_update_elem(fd, key, value, BPF_EXIST) can fail with ENOENT
if element doesn't exist.
Userspace will call it as:
int bpf_update_elem(int fd, void *key, void *value, __u64 flags)
{
union bpf_attr attr = {
.map_fd = fd,
.key = ptr_to_u64(key),
.value = ptr_to_u64(value),
.flags = flags;
};
return bpf(BPF_MAP_UPDATE_ELEM, &attr, sizeof(attr));
}
First two bits of 'flags' are used to encode style of bpf_update_elem() command.
Bits 2-63 are reserved for future use.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This brings in some mwifiex changes that further patches will
need to work on top to not cause merge conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is really the meat of the MPX patch set. If there is one patch to
review in the entire series, this is the one. There is a new ABI here
and this kernel code also interacts with userspace memory in a
relatively unusual manner. (small FAQ below).
Long Description:
This patch adds two prctl() commands to provide enable or disable the
management of bounds tables in kernel, including on-demand kernel
allocation (See the patch "on-demand kernel allocation of bounds tables")
and cleanup (See the patch "cleanup unused bound tables"). Applications
do not strictly need the kernel to manage bounds tables and we expect
some applications to use MPX without taking advantage of this kernel
support. This means the kernel can not simply infer whether an application
needs bounds table management from the MPX registers. The prctl() is an
explicit signal from userspace.
PR_MPX_ENABLE_MANAGEMENT is meant to be a signal from userspace to
require kernel's help in managing bounds tables.
PR_MPX_DISABLE_MANAGEMENT is the opposite, meaning that userspace don't
want kernel's help any more. With PR_MPX_DISABLE_MANAGEMENT, the kernel
won't allocate and free bounds tables even if the CPU supports MPX.
PR_MPX_ENABLE_MANAGEMENT will fetch the base address of the bounds
directory out of a userspace register (bndcfgu) and then cache it into
a new field (->bd_addr) in the 'mm_struct'. PR_MPX_DISABLE_MANAGEMENT
will set "bd_addr" to an invalid address. Using this scheme, we can
use "bd_addr" to determine whether the management of bounds tables in
kernel is enabled.
Also, the only way to access that bndcfgu register is via an xsaves,
which can be expensive. Caching "bd_addr" like this also helps reduce
the cost of those xsaves when doing table cleanup at munmap() time.
Unfortunately, we can not apply this optimization to #BR fault time
because we need an xsave to get the value of BNDSTATUS.
==== Why does the hardware even have these Bounds Tables? ====
MPX only has 4 hardware registers for storing bounds information.
If MPX-enabled code needs more than these 4 registers, it needs to
spill them somewhere. It has two special instructions for this
which allow the bounds to be moved between the bounds registers
and some new "bounds tables".
They are similar conceptually to a page fault and will be raised by
the MPX hardware during both bounds violations or when the tables
are not present. This patch handles those #BR exceptions for
not-present tables by carving the space out of the normal processes
address space (essentially calling the new mmap() interface indroduced
earlier in this patch set.) and then pointing the bounds-directory
over to it.
The tables *need* to be accessed and controlled by userspace because
the instructions for moving bounds in and out of them are extremely
frequent. They potentially happen every time a register pointing to
memory is dereferenced. Any direct kernel involvement (like a syscall)
to access the tables would obviously destroy performance.
==== Why not do this in userspace? ====
This patch is obviously doing this allocation in the kernel.
However, MPX does not strictly *require* anything in the kernel.
It can theoretically be done completely from userspace. Here are
a few ways this *could* be done. I don't think any of them are
practical in the real-world, but here they are.
Q: Can virtual space simply be reserved for the bounds tables so
that we never have to allocate them?
A: As noted earlier, these tables are *HUGE*. An X-GB virtual
area needs 4*X GB of virtual space, plus 2GB for the bounds
directory. If we were to preallocate them for the 128TB of
user virtual address space, we would need to reserve 512TB+2GB,
which is larger than the entire virtual address space today.
This means they can not be reserved ahead of time. Also, a
single process's pre-popualated bounds directory consumes 2GB
of virtual *AND* physical memory. IOW, it's completely
infeasible to prepopulate bounds directories.
Q: Can we preallocate bounds table space at the same time memory
is allocated which might contain pointers that might eventually
need bounds tables?
A: This would work if we could hook the site of each and every
memory allocation syscall. This can be done for small,
constrained applications. But, it isn't practical at a larger
scale since a given app has no way of controlling how all the
parts of the app might allocate memory (think libraries). The
kernel is really the only place to intercept these calls.
Q: Could a bounds fault be handed to userspace and the tables
allocated there in a signal handler instead of in the kernel?
A: (thanks to tglx) mmap() is not on the list of safe async
handler functions and even if mmap() would work it still
requires locking or nasty tricks to keep track of the
allocation state there.
Having ruled out all of the userspace-only approaches for managing
bounds tables that we could think of, we create them on demand in
the kernel.
Based-on-patch-by: Qiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141114151829.AD4310DE@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The version field defined in the audit status structure was found to have
limitations in terms of its expressibility of features supported. This is
distict from the get/set features call to be able to command those features
that are present.
Converting this field from a version number to a feature bitmap will allow
distributions to selectively backport and support certain features and will
allow upstream to be able to deprecate features in the future. It will allow
userspace clients to first query the kernel for which features are actually
present and supported. Currently, EINVAL is returned rather than EOPNOTSUP,
which isn't helpful in determining if there was an error in the command, or if
it simply isn't supported yet. Past features are not represented by this
bitmap, but their use may be converted to EOPNOTSUP if needed in the future.
Since "version" is too generic to convert with a #define, use a union in the
struct status, introducing the member "feature_bitmap" unionized with
"version".
Convert existing AUDIT_VERSION_* macros over to AUDIT_FEATURE_BITMAP*
counterparts, leaving the former for backwards compatibility.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: minor whitespace tweaks]
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Enable capture of interrupted machine state for each sample.
Registers to sample are passed per event in the sample_regs_intr bitmask.
To sample interrupt machine state, the PERF_SAMPLE_INTR_REGS must be passed in
sample_type.
The list of available registers is arch dependent and provided by asm/perf_regs.h
Registers are laid out as u64 in the order of the bit order of sample_intr_regs.
This patch also adds a new ABI version PERF_ATTR_SIZE_VER4 because we extend
the perf_event_attr struct with a new u64 field.
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: cebbert.lkml@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/1411559322-16548-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove question mark:
s/New utsname group?/New utsname namespace
Unified style for IPC:
s/New ipcs/New ipc namespace
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/1415091082-15093-1-git-send-email-chenhanxiao@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Place v4l2_mbus_pixelcode in a #ifndef __KERNEL__ section so that kernel
users don't have access to these definitions.
We have to keep this definition for user-space users even though they're
encouraged to move to the new media_bus_format enum.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Replace references to the v4l2_mbus_pixelcode enum with the new
media_bus_format enum in all common headers.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Define MEDIA_BUS_FMT macros (re-using the values defined in the
v4l2_mbus_pixelcode enum) into a separate header file so that they can be
used from the DRM/KMS subsystem without any reference to the V4L2
subsystem.
Then set V4L2_MBUS_FMT definitions to the MEDIA_BUS_FMT values using the
V4L2_MBUS_FROM_MEDIA_BUS_FMT macro.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch
Pravin B Shelar says:
====================
Open vSwitch
Following batch of patches brings feature parity between upstream
ovs and out of tree ovs module.
Two features are added, first adds support to export egress
tunnel information for a packet. This is used to improve
visibility in network traffic. Second feature allows userspace
vswitchd process to probe ovs module features. Other patches
are optimization and code cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Excessive virtio_balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. Various mechanisms are
responsible for correct virtio_balloon memory management. Nevertheless
it is often the case that these control tools does not have enough time
to react on fast changing memory load. As a result OS runs out of memory
and invokes OOM-killer. The balancing of memory by use of the virtio
balloon should not cause the termination of processes while there are
pages in the balloon. Now there is no way for virtio balloon driver to
free some memory at the last moment before some process will be get
killed by OOM-killer.
This does not provide a security breach as balloon itself is running
inside guest OS and is working in the cooperation with the host. Thus
some improvements from guest side should be considered as normal.
To solve the problem, introduce a virtio_balloon callback which is
expected to be called from the oom notifier call chain in out_of_memory()
function. If virtio balloon could release some memory, it will make
the system to return and retry the allocation that forced the out of
memory killer to run.
Allocate virtio feature bit for this: it is not set by default,
the the guest will not deflate virtio balloon on OOM without explicit
permission from host.
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:
====================
pull request: wireless-next 2014-11-07
Please pull this batch of updates intended for the 3.19 stream!
For the mac80211 bits, Johannes says:
"This relatively large batch of changes is comprised of the following:
* large mac80211-hwsim changes from Ben, Jukka and a bit myself
* OCB/WAVE/11p support from Rostislav on behalf of the Czech Technical
University in Prague and Volkswagen Group Research
* minstrel VHT work from Karl
* more CSA work from Luca
* WMM admission control support in mac80211 (myself)
* various smaller fixes, spelling corrections, and minor API additions"
For the Bluetooth bits, Johan says:
"Here's the first bluetooth-next pull request for 3.19. The vast majority
of patches are for ieee802154 from Alexander Aring with various fixes
and cleanups. There are also several LE/SMP fixes as well as improved
support for handling LE devices that have lost their pairing information
(the patches from Alfonso). Jukka provides a couple of stability fixes
for 6lowpan and Szymon conformance fixes for RFCOMM. For the HCI drivers
we have one new USB ID for an Acer controller as well as a reset
handling fix for H5."
For the Atheros bits, Kalle says:
"Major changes are:
o ethtool support (Ben)
o print dev string prefix with debug hex buffers dump (Michal)
o debugfs file to read calibration data from the firmware verification
purposes (me)
o fix fw_stats debugfs file, now results are more reliable (Michal)
o firmware crash counters via debugfs (Ben&me)
o various tracing points to debug firmware (Rajkumar)
o make it possible to provide firmware calibration data via a file (me)
And we have quite a lot of smaller fixes and clean up."
For the iwlwifi bits, Emmanuel says:
"The big new thing here is netdetect which allows the
firmware to wake up the platform when a specific network
is detected. Along with that I have fixes for d3 operation.
The usual amount of rate scaling stuff - we now support STBC.
The other commit that stands out is Johannes's work on
devcoredump. He basically starts to use the standard
infrastructure he built."
Along with that are the usual sort of updates and such for ath9k,
brcmfmac, wil6210, and a handful of other bits here and there...
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Babel uses rt_proto 42. Add to userspace visible header file.
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow setting bandwidth related regulatory flags. These flags are mapped
to the corresponding channel flags in the specified range.
Make sure the new flags are consulted when calculating the maximum
bandwidth allowed by a regulatory-rule.
Also allow propagating the GO_CONCURRENT modifier from a reg-rule to a
channel.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For multi-vif channel switches, we want to send
NL80211_CMD_CH_SWITCH_NOTIFY to the userspace to let it decide whether
other interfaces need to be moved as well. This is needed when we
want a P2P GO interface to follow the channel of a station, for
example.
Modify the code so that all interfaces can send CSA notifications.
Additionally, send notifications for STA CSA as well.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new NL80211_CH_SWITCH_STARTED_NOTIFY message that can be sent to
the userspace when a channel switch process has started. This allows
userspace to take action, for instance, by requesting other interfaces
to switch channel as necessary.
This patch introduces a function that allows the drivers to send this
notification. It should be used when the driver starts processing a
channel switch initiated by a remote device (eg. when a STA receives a
CSA from the AP) and when it successfully starts a userspace-triggered
channel switch (eg. when hostapd triggers a channel swith in the AP).
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This new flag is useful for suppressing error logging while probing
for datapath features using flow commands. For backwards
compatibility reasons the commands are executed normally, but error
logging is suppressed.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
|
|
OVS vswitch has extended IPFIX exporter to export tunnel headers
to improve network visibility.
To export this information userspace needs to know egress tunnel
for given packet. By extending packet attributes datapath can
export egress tunnel info for given packet. So that userspace
can ask for egress tunnel info in userspace action. This
information is used to build IPFIX data for given flow.
Signed-off-by: Wenyu Zhang <wenyuz@vmware.com>
Acked-by: Romain Lenglet <rlenglet@vmware.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
|
|
This allows you to filter traffic by process control group (cgroup).
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As NIC multicast filtering isn't perfect, and some platforms are
quite content to spew broadcasts, we should not trigger an event
for skb:kfree_skb when we do not have a match for such an incoming
datagram. We do though want to avoid sweeping the matter under the
rug entirely, so increment a suitable statistic.
This incorporates feedback from David L. Stevens, Karl Neiss and Eric
Dumazet.
V3 - use bool per David Miller
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The entries in the Kbuild files are incorrectly sorted.
Matters for aesthetics only.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An attempt to fix fcopy on i586 (bc5a5b0 Drivers: hv: util: Properly pack the data
for file copy functionality) led to a regression on x86_64 (and actually didn't fix
i586 breakage). Fcopy messages from Hyper-V host come in the following format:
struct do_fcopy_hdr | 36 bytes
0000 | 4 bytes
offset | 8 bytes
size | 4 bytes
data | 6144 bytes
On x86_64 struct hv_do_fcopy matched this format without ' __attribute__((packed))'
and on i586 adding ' __attribute__((packed))' to it doesn't change anything. Keep
the structure packed and add padding to match re reality. Tested both i586 and x86_64
on Hyper-V Server 2012 R2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
When somebody calls TIOCSSERIAL ioctl with serial flags to set one of
* ASYNC_SESSION_LOCKOUT
* ASYNC_PGRP_LOCKOUT
* ASYNC_CALLOUT_NOHUP
* ASYNC_AUTOPROBE
nothing happens. We actually ignore the flags for over a decade at
least (I checked 2.6.0).
So start yelling at users who use those flags, that they shouldn't.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Ralink RT2880 SoC and its successors have an internal 8250 core. This core
needs the same quirks applied as the AMD AU1xxx uart. In addition to these
quirks, the ports memory region is only 0x100 unlike the AU1xxx which has a
size of 0x1000.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Should be the same as other IPv6 address fields.
Current master produces sparse warnings without this change.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
|
