| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v3.17 merge window
Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).
The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains updates for your net-next tree,
they are:
1) Use kvfree() helper function from x_tables, from Eric Dumazet.
2) Remove extra timer from the conntrack ecache extension, use a
workqueue instead to redeliver lost events to userspace instead,
from Florian Westphal.
3) Removal of the ulog targets for ebtables and iptables. The nflog
infrastructure superseded this almost 9 years ago, time to get rid
of this code.
4) Replace the list of loggers by an array now that we can only have
two possible non-overlapping logger flavours, ie. kernel ring buffer
and netlink logging.
5) Move Eric Dumazet's log buffer code to nf_log to reuse it from
all of the supported per-family loggers.
6) Consolidate nf_log_packet() as an unified interface for packet logging.
After this patch, if the struct nf_loginfo is available, it explicitly
selects the logger that is used.
7) Move ip and ip6 logging code from xt_LOG to the corresponding
per-family loggers. Thus, x_tables and nf_tables share the same code
for packet logging.
8) Add generic ARP packet logger, which is used by nf_tables. The
format aims to be consistent with the output of xt_LOG.
9) Add generic bridge packet logger. Again, this is used by nf_tables
and it routes the packets to the real family loggers. As a result,
we get consistent logging format for the bridge family. The ebt_log
logging code has been intentionally left in place not to break
backward compatibility since the logging output differs from xt_LOG.
10) Update nft_log to explicitly request the required family logger when
needed.
11) Finish nft_log so it supports arp, ip, ip6, bridge and inet families.
Allowing selection between netlink and kernel buffer ring logging.
12) Several fixes coming after the netfilter core logging changes spotted
by robots.
13) Use IS_ENABLED() macros whenever possible in the netfilter tree,
from Duan Jiong.
14) Removal of a couple of unnecessary branch before kfree, from Fabian
Frederick.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent version of xf86-input-wacom no longer support directly accessing
serial tablets. Instead xf86-input-wacom now expects all wacom tablets to
be driven by the kernel and to show up as evdev devices.
This has caused old serial Wacom tablets to stop working for people who still
have such tablets. Julian Squires has written a serio input driver to fix this:
https://github.com/tokenrove/wacom-serial-iv
This is a cleaned up version of this driver with improved Graphire support
(I own an old Graphire myself).
Signed-off-by: Julian Squires <julian@cipht.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Applying restrictive seccomp filter programs to large or diverse
codebases often requires handling threads which may be started early in
the process lifetime (e.g., by code that is linked in). While it is
possible to apply permissive programs prior to process start up, it is
difficult to further restrict the kernel ABI to those threads after that
point.
This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for
synchronizing thread group seccomp filters at filter installation time.
When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC,
filter) an attempt will be made to synchronize all threads in current's
threadgroup to its new seccomp filter program. This is possible iff all
threads are using a filter that is an ancestor to the filter current is
attempting to synchronize to. NULL filters (where the task is running as
SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be
transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS,
...) has been set on the calling thread, no_new_privs will be set for
all synchronized threads too. On success, 0 is returned. On failure,
the pid of one of the failing threads will be returned and no filters
will have been applied.
The race conditions against another thread are:
- requesting TSYNC (already handled by sighand lock)
- performing a clone (already handled by sighand lock)
- changing its filter (already handled by sighand lock)
- calling exec (handled by cred_guard_mutex)
The clone case is assisted by the fact that new threads will have their
seccomp state duplicated from their parent before appearing on the tasklist.
Holding cred_guard_mutex means that seccomp filters cannot be assigned
while in the middle of another thread's exec (potentially bypassing
no_new_privs or similar). The call to de_thread() may kill threads waiting
for the mutex.
Changes across threads to the filter pointer includes a barrier.
Based on patches by Will Drewry.
Suggested-by: Julien Tinnes <jln@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
|
|
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
|
|
Add tunable RX interrupt trigger I/F of FIFO buffers.
Serial devices are used as not only message communication devices but control
or sending communication devices. For the latter uses, normally small data
will be exchanged, so user applications want to receive data unit as soon as
possible for real-time tendency. If we have a sensor which sends a 1 byte data
each time and must control a device based on the sensor feedback, the RX
interrupt should be triggered for each data.
According to HW specification of serial UART devices, RX interrupt trigger
can be changed, but the trigger is hard-coded. For example, RX interrupt trigger
in 16550A can be set to 1, 4, 8, or 14 bytes for HW, but current driver sets
the trigger to only 8bytes.
This patch makes some devices change RX interrupt trigger from userland.
<How to use>
- Read current setting
# cat /sys/class/tty/ttyS0/rx_trig_bytes
8
- Write user setting
# echo 1 > /sys/class/tty/ttyS0/rx_trig_bytes
# cat /sys/class/tty/ttyS0/rx_trig_bytes
1
<Support uart devices>
- 16550A and Tegra (1, 4, 8, or 14 bytes)
- 16650V2 (8, 16, 24, or 28 bytes)
- 16654 (8, 16, 56, or 60 bytes)
- 16750 (1, 16, 32, or 56 bytes)
<Change log>
Changes in V9:
- Use attr_group instead of dev_spec_attr_group of uart_port structure
Changes in V8:
- Divide this patch from V7's patch based on Greg's comment
Changes in V7:
- Add Documentation
- Change I/F name from rx_int_trig to rx_trig_bytes because the name
rx_int_trig is hard to understand how users specify the value
Changes in V6:
- Move FCR_RX_TRIG_* definition in 8250.h to include/uapi/linux/serial_reg.h,
rename those to UART_FCR_R_TRIG_*, and use UART_FCR_TRIGGER_MASK to
UART_FCR_R_TRIG_BITS()
- Change following function names:
convert_fcr2val() => fcr_get_rxtrig_bytes()
convert_val2rxtrig() => bytes_to_fcr_rxtrig()
- Fix typo in serial8250_do_set_termios()
- Delete the verbose error message pr_info() in bytes_to_fcr_rxtrig()
- Rename *rx_int_trig/rx_trig* to *rxtrig* for several functions or variables
(but UI remains rx_int_trig)
- Change the meaningless variable name 'val' to 'bytes' following functions:
fcr_get_rxtrig_bytes(), bytes_to_fcr_rxtrig(), do_set_rxtrig(),
do_serial8250_set_rxtrig(), and serial8250_set_attr_rxtrig()
- Use up->fcr in order to get rxtrig_bytes instead of rx_trig_raw in
fcr_get_rxtrig_bytes()
- Use conf_type->rxtrig_bytes[0] instead of switch statement for support check
in register_dev_spec_attr_grp()
- Delete the checking whether a user changed FCR or not when minimum buffer
is needed in serial8250_do_set_termios()
Changes in V5.1:
- Fix FCR_RX_TRIG_MAX_STATE definition
Changes in V5:
- Support Tegra, 16650V2, 16654, and 16750
- Store default FCR value to up->fcr when the port is first created
- Add rx_trig_byte[] in uart_config[] for each device and use rx_trig_byte[]
in convert_fcr2val() and convert_val2rxtrig()
Changes in V4:
- Introduce fifo_bug flag in uart_8250_port structure
This is enabled only when parity is enabled and UART_BUG_PARITY is enabled
for up->bugs. If this flag is enabled, user cannot set RX trigger.
- Return -EOPNOTSUPP when it does not support device at convert_fcr2val() and
at convert_val2rxtrig()
- Set the nearest lower RX trigger when users input a meaningless value at
convert_val2rxtrig()
- Check whether p->fcr is existing at serial8250_clear_and_reinit_fifos()
- Set fcr = up->fcr in the begging of serial8250_do_set_termios()
Changes in V3:
- Change I/F from ioctl(2) to sysfs(rx_int_trig)
Changed in V2:
- Use _IOW for TIOCSFIFORTRIG definition
- Pass the interrupt trigger value itself
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a macro to test if the field consists of a single top
or bottom field. Anyone who needs to work with fields as opposed to
frame will need this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
When set, the new V4L2_PIX_FMT_FLAG_PREMUL_ALPHA flag indicates that the
pixel values are premultiplied by the alpha channel value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The v4l2_pix_format structure has no reserved field. It is embedded in
the v4l2_framebuffer structure which has no reserved fields either, and
in the v4l2_format structure which has reserved fields that were not
previously required to be zeroed out by applications.
To allow extending v4l2_pix_format, inline it in the v4l2_framebuffer
structure, and use the priv field as a magic value to indicate that the
application has set all v4l2_pix_format extended fields and zeroed all
reserved fields following the v4l2_pix_format field in the v4l2_format
structure.
The availability of this API extension is reported to userspace through
the new V4L2_CAP_EXT_PIX_FORMAT capability flag. Just checking that the
priv field is still set to the magic value at [GS]_FMT return wouldn't
be enough, as older kernels don't zero the priv field on return.
To simplify the internal API towards drivers zero the extended fields
and set the priv field to the magic value for applications not aware of
the extensions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The existing RGB pixel formats are ill-defined in respect to their alpha
bits and their meaning is driver dependent. Create new standard ARGB and
XRGB variants with clearly defined meanings and make the existing
variants deprecated.
The new pixel formats 4CC values have been selected to match the DRM
4CCs for the same in-memory formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Add a new MOTION_DET event to signal when motion is detected.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Add the 'Detect' control class and the new motion detection controls.
Those controls will be used by the solo6x10 and go7007 drivers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
These are needed by the upcoming patches for the motion detection
matrices.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Add a new struct and ioctl to extend the amount of information you can
get for a control.
The range is now a s64 type, and array dimensions and element size can be
reported through nr_of_dims/dims/elems/elem_size.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Compound controls are controls that can be used for compound and array
types. This allows for more compound data structures to be used with the
control framework.
The existing V4L2_CTRL_FLAG_NEXT_CTRL flag will only enumerate non-compound
controls, so a new V4L2_CTRL_FLAG_NEXT_COMPOUND flag is added to enumerate
compound controls. Set both flags to enumerate any control (compound or not).
Compound control types will start at V4L2_CTRL_COMPOUND_TYPES. In addition, any
control that uses the new 'ptr' field or the existing 'string' field will have
flag V4L2_CTRL_FLAG_HAS_PAYLOAD set.
While not strictly necessary, adding that flag makes life for applications
a lot simpler. If the flag is not set, then the control value is set
through the value or value64 fields of struct v4l2_ext_control, otherwise
a pointer points to the value.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
This patch implements section 8.1.31. of RFC6458, which adds support
for setting/retrieving SCTP_DEFAULT_SNDINFO:
Applications that wish to use the sendto() system call may wish
to specify a default set of parameters that would normally be
supplied through the inclusion of ancillary data. This socket
option allows such an application to set the default sctp_sndinfo
structure. The application that wishes to use this socket option
simply passes the sctp_sndinfo structure (defined in Section 5.3.4)
to this call. The input parameters accepted by this call include
snd_sid, snd_flags, snd_ppid, and snd_context. The snd_flags
parameter is composed of a bitwise OR of SCTP_UNORDERED, SCTP_EOF,
and SCTP_SENDALL. The snd_assoc_id field specifies the association
to which to apply the parameters. For a one-to-many style socket,
any of the predefined constants are also allowed in this field.
The field is ignored for one-to-one style sockets.
Joint work with Daniel Borkmann.
Signed-off-by: Geir Ola Vaagland <geirola@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements section 5.3.6. of RFC6458, that is, support
for 'SCTP Next Receive Information Structure' (SCTP_NXTINFO) which
is placed into ancillary data cmsghdr structure for each recvmsg()
call, if this information is already available when delivering the
current message.
This option can be enabled/disabled via setsockopt(2) on SOL_SCTP
level by setting an int value with 1/0 for SCTP_RECVNXTINFO in
user space applications as per RFC6458, section 8.1.30.
The sctp_nxtinfo structure is defined as per RFC as below ...
struct sctp_nxtinfo {
uint16_t nxt_sid;
uint16_t nxt_flags;
uint32_t nxt_ppid;
uint32_t nxt_length;
sctp_assoc_t nxt_assoc_id;
};
... and provided under cmsg_level IPPROTO_SCTP, cmsg_type
SCTP_NXTINFO, while cmsg_data[] contains struct sctp_nxtinfo.
Joint work with Daniel Borkmann.
Signed-off-by: Geir Ola Vaagland <geirola@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements section 5.3.5. of RFC6458, that is, support
for 'SCTP Receive Information Structure' (SCTP_RCVINFO) which is
placed into ancillary data cmsghdr structure for each recvmsg()
call.
This option can be enabled/disabled via setsockopt(2) on SOL_SCTP
level by setting an int value with 1/0 for SCTP_RECVRCVINFO in user
space applications as per RFC6458, section 8.1.29.
The sctp_rcvinfo structure is defined as per RFC as below ...
struct sctp_rcvinfo {
uint16_t rcv_sid;
uint16_t rcv_ssn;
uint16_t rcv_flags;
<-- 2 bytes hole -->
uint32_t rcv_ppid;
uint32_t rcv_tsn;
uint32_t rcv_cumtsn;
uint32_t rcv_context;
sctp_assoc_t rcv_assoc_id;
};
... and provided under cmsg_level IPPROTO_SCTP, cmsg_type
SCTP_RCVINFO, while cmsg_data[] contains struct sctp_rcvinfo.
An sctp_rcvinfo item always corresponds to the data in msg_iov.
Joint work with Daniel Borkmann.
Signed-off-by: Geir Ola Vaagland <geirola@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implements section 5.3.4. of RFC6458, that is, support
for 'SCTP Send Information Structure' (SCTP_SNDINFO) which can be
placed into ancillary data cmsghdr structure for sendmsg() calls.
The sctp_sndinfo structure is defined as per RFC as below ...
struct sctp_sndinfo {
uint16_t snd_sid;
uint16_t snd_flags;
uint32_t snd_ppid;
uint32_t snd_context;
sctp_assoc_t snd_assoc_id;
};
... and supplied under cmsg_level IPPROTO_SCTP, cmsg_type
SCTP_SNDINFO, while cmsg_data[] contains struct sctp_sndinfo.
An sctp_sndinfo item always corresponds to the data in msg_iov.
Joint work with Daniel Borkmann.
Signed-off-by: Geir Ola Vaagland <geirola@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- KFD_IOC_GET_VERSION:
Retrieves the interface version of amdkfd
- KFD_IOC_CREATE_QUEUE:
Creates a usermode queue that runs on a specific GPU device
- KFD_IOC_DESTROY_QUEUE:
Destroys an existing usermode queue
- KFD_IOC_SET_MEMORY_POLICY:
Sets the memory policy of the default and alternate aperture of the
calling process
- KFD_IOC_GET_CLOCK_COUNTERS:
Retrieves counters (timestamps) of CPU and GPU
- KFD_IOC_GET_PROCESS_APERTURES:
Retrieves information about process apertures that were initialized
during the open() call of the amdkfd device
- KFD_IOC_UPDATE_QUEUE:
Updates configuration of an existing usermode queue
v3: Remove pragma pack and pmc ioctls. Added parameter for doorbell offset and
a comment on counters
v5:
Add define for AQL queues.
Fix arguments of Get Version IOCTL
Make IOCTL's structures to be the same size on 32/64 bit
v6: Change the version of the amdkfd-thunk interface
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
git://gitorious.org/linux-can/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2014-07-15
this is a pull request of 4 patches for net-next/master.
Prabhakar Lad contributes a patch that converts the c_can driver to use
the devm api. The remaining four patches by Nikita Edward Baruzdin
improve the SJA1000 driver with loopback testing support and introduce
a new testing mode presume ack, for successful transmission even if no
ACK is received.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on a patch by David Herrmann.
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
NET_NAME_ENUM:
The ifname is provided by the kernel with an enumerated
suffix, typically based on order of discovery. Names may
be reused and unpredictable.
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device and names deduced from hardware properties
(including being given explicitly by the firmware). Names
depending on the order of discovery, or in any other way on the
existence of other devices, must not be marked as PREDICTABLE.
NET_NAME_USER:
The ifname was provided by user-space during net-device setup.
NET_NAME_RENAMED:
The net-device has been renamed from userspace. Once this type is set,
it cannot change again.
NET_NAME_UNKNOWN:
This is an internal placeholder to indicate that we yet haven't yet
categorized the name. It will not be exposed to userspace, rather
-EINVAL is returned.
The aim of these patches is to improve user-space renaming of interfaces. As
a general rule, userspace must rename interfaces to guarantee that names stay
the same every time a given piece of hardware appears (at boot, or when
attaching it). However, there are several situations where userspace should
not perform the renaming, and that depends on both the policy of the local
admin, but crucially also on the nature of the current interface name.
If an interface was created in repsonse to a userspace request, and userspace
already provided a name, we most probably want to leave that name alone. The
main instance of this is wifi-P2P devices created over nl80211, which currently
have a long-standing bug where they are getting renamed by udev. We label such
names NET_NAME_USER.
If an interface, unbeknown to us, has already been renamed from userspace, we
most probably want to leave also that alone. This will typically happen when
third-party plugins (for instance to udev, but the interface is generic so could
be from anywhere) renames the interface without informing udev about it. A
typical situation is when you switch root from an installer or an initrd to the
real system and the new instance of udev does not know what happened before
the switch. These types of problems have caused repeated issues in the past. To
solve this, once an interface has been renamed, its name is labelled
NET_NAME_RENAMED.
In many cases, the kernel is actually able to name interfaces in such a
way that there is no need for userspace to rename them. This is the case when
the enumeration order of devices, or in fact any other (non-parent) device on
the system, can not influence the name of the interface. Examples include
statically created devices, or any naming schemes based on hardware properties
of the interface. In this case the admin may prefer to use the kernel-provided
names, and to make that possible we label such names NET_NAME_PREDICTABLE.
We want the kernel to have tho possibilty of performing predictable interface
naming itself (and exposing to userspace that it has), as the information
necessary for a proper naming scheme for a certain class of devices may not
be exposed to userspace.
The case where renaming is almost certainly desired, is when the kernel has
given the interface a name using global device enumeration based on order of
discovery (ethX, wlanY, etc). These naming schemes are labelled NET_NAME_ENUM.
Lastly, a fallback is left as NET_NAME_UNKNOWN, to indicate that a driver has
not yet been ported. This is mostly useful as a transitionary measure, allowing
us to label the various naming schemes bit by bit.
v8: minor documentation fixes
v9: move comment to the right commit
Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most CAN controllers have a support for ignoring ACK absence. Some of
them refer to this feature as a self test mode (e. g. SJA1000) and some
include it as a part of a loopback mode (e. g. MCP2510).
Setting the introduced flag via netlink should make CAN controller
perform a successful transmission, even if there is no acknowledgement
(dominant ACK bit) received.
Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fixes the corresponing checkpatch.pl warning.
Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This resolves a number of merge issues with changes in this tree and
Linus's tree at the same time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a possibility for userspace to set various (so far
two) modes of generating addresses. This is useful for example for
NetworkManager because it can set the mode to NONE and take care of link
local addresses itself. That allow it to have the interface up,
monitoring carrier but still don't have any addresses on it.
One more use-case by Dan Williams:
<quote>
WWAN devices often have their LL address provided by the firmware of the
device, which sometimes refuses to respond to incorrect LL addresses
when doing DHCPv6 or IPv6 ND. The kernel cannot generate the correct LL
address for two reasons:
1) WWAN pseudo-ethernet interfaces often construct a fake MAC address,
or read a meaningless MAC address from the firmware. Thus the EUI64 and
the IPv6LL address the kernel assigns will be wrong. The real LL
address is often retrieved from the firmware with AT or proprietary
commands.
2) WWAN PPP interfaces receive their LL address from IPV6CP, not from
kernel assignments. Only after IPV6CP has completed do we know the LL
address of the PPP interface and its peer. But the kernel has already
assigned an incorrect LL address to the interface.
So being able to suppress the kernel LL address generation and assign
the one retrieved from the firmware is less complicated and more robust.
</quote>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for OS descriptors. The new format of descriptors is used,
because the "flags" field is required for extensions. os_count gives
the number of OSDesc[] elements.
The format of descriptors is given in include/uapi/linux/usb/functionfs.h.
For extended properties descriptor the usb_ext_prop_desc structure covers
only a part of a descriptor, because the wPropertyNameLength is unknown
up front.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
This patch
- adds s390 specific MP states to linux headers and documents them
- implements the KVM_{SET,GET}_MP_STATE ioctls
- enables KVM_CAP_MP_STATE
- allows user space to control the VCPU state on s390.
If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable
manual changing of the VCPU state and trust user space to do the right thing.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Highlight the aspects of the ioctls that are actually specific to x86
and ia64. As defined restrictions (irqchip) and mp states may not apply
to other architectures, these parts are flagged to belong to x86 and ia64.
In preparation for the use of KVM_(S|G)ET_MP_STATE by s390.
Fix a spelling error (KVM_SET_MP_STATE vs. KVM_SET_MPSTATE) on the way.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
On AArch64, audit is supported through generic lib/audit.c and
compat_audit.c, and so this patch adds arch specific definitions required.
Acked-by Will Deacon <will.deacon@arm.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Some Dell laptops support fan speeds of {0, 1, 2, 3} instead of {0, 1, 2}.
Add a define for it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds an interface on sysfs for userspace to request a card
bitstream reload. It sets the appropriate register and try to perform a
fundamental reset on the PCIe slot for the card to reload the bitstream
from the chosen partition.
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
John W. Linville says:
====================
pull request: wireless-next 2014-07-03
Please pull this first batch of wireless updates intended for the
3.17 stream...
For the mac80211 bits, Johannes says:
"The biggest thing here is probably Arik's TDLS rework, beyond that we
have smaller improvements and features like David's scanning IE thing,
Luca's queue work, some CSA work, etc. Also your PID rate control
removal, of course."
For the iwlwifi bits, Emmanuel says:
"I have here a whole bunch of various things. Andy contributes
better debug prints for dvm specific flows and a module parameter to
completely disable power save for dvm. Andrei is sharing the premises
of his work on CSA - more to come. Eran and Liad keep on working
on the new devices. I have the regular amount of BT Coex stuff and
I continue to work on the firmware error report system adding more
debug capabilities. More to come on that subject too."
On top of that, there are some cleanups to the new rsi driver, some
continuing improvements to the rtl818x drivers, and the usual bundles
of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here
and there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Automatically generate flow labels for IPv6 packets on transmit.
The flow label is computed based on skb_get_hash. The flow label will
only automatically be set when it is zero otherwise (i.e. flow label
manager hasn't set one). This supports the transmit side functionality
of RFC 6438.
Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior
system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this
functionality per socket.
By default, auto flowlabels are disabled to avoid possible conflicts
with flow label manager, however if this feature proves useful we
may want to enable it by default.
It should also be noted that FreeBSD has already implemented automatic
flow labels (including the sysctl and socket option). In FreeBSD,
automatic flow labels default to enabled.
Performance impact:
Running super_netperf with 200 flows for TCP_RR and UDP_RR for
IPv6. Note that in UDP case, __skb_get_hash will be called for
every packet with explains slight regression. In the TCP case
the hash is saved in the socket so there is no regression.
Automatic flow labels disabled:
TCP_RR:
86.53% CPU utilization
127/195/322 90/95/99% latencies
1.40498e+06 tps
UDP_RR:
90.70% CPU utilization
118/168/243 90/95/99% latencies
1.50309e+06 tps
Automatic flow labels enabled:
TCP_RR:
85.90% CPU utilization
128/199/337 90/95/99% latencies
1.40051e+06
UDP_RR
92.61% CPU utilization
115/164/236 90/95/99% latencies
1.4687e+06
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We've queued up a few fixes in my for-linus branch"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix crash when starting transaction
Btrfs: fix btrfs_print_leaf for skinny metadata
Btrfs: fix race of using total_bytes_pinned
btrfs: use E2BIG instead of EIO if compression does not help
btrfs: remove stale comment from btrfs_flush_all_pending_stuffs
Btrfs: fix use-after-free when cloning a trailing file hole
btrfs: fix null pointer dereference in btrfs_show_devname when name is null
btrfs: fix null pointer dereference in clone_fs_devices when name is null
btrfs: fix nossd and ssd_spread mount option regression
Btrfs: fix race between balance recovery and root deletion
Btrfs: atomically set inode->i_flags in btrfs_update_iflags
btrfs: only unlock block in verify_parent_transid if we locked it
Btrfs: assert send doesn't attempt to start transactions
btrfs compression: reuse recently used workspace
Btrfs: fix crash when mounting raid5 btrfs with missing disks
btrfs: create sprout should rename fsid on the sysfs as well
btrfs: dev replace should replace the sysfs entry
btrfs: dev add should add its sysfs entry
btrfs: dev delete should remove sysfs entry
btrfs: rename add_device_membership to btrfs_kobj_add_device
|
|
This can be used in virtual networking applications, and
may have other uses as well. The option is disabled by
default.
A specific use case is setting up virtual routers, bridges, and
hosts on a single OS without the use of network namespaces or
virtual machines. With proper use of ip rules, routing tables,
veth interface pairs and/or other virtual interfaces,
and applications that can bind to interfaces and/or IP addresses,
it is possibly to create one or more virtual routers with multiple
hosts attached. The host interfaces can act as IPv6 systems,
with radvd running on the ports in the virtual routers. With the
option provided in this patch enabled, those hosts can now properly
obtain IPv6 addresses from the radvd.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current virtio-blk spec only supports one virtual queue for transfering
data between VM and host, and inside VM all kinds of operations on
the virtual queue needs to hold one lock, so cause below problems:
- bad scalability
- bad throughput
This patch requests to introduce feature of VIRTIO_BLK_F_MQ
so that more than one virtual queues can be used to virtio-blk
device, then above problems can be solved or eased.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
After the SG_IO ioctl was copied into the block layer and
later into the bsg driver, subtle differences emerged.
One difference is the way injected commands are queued through
the block layer (i.e. this is not SCSI device queueing nor SATA
NCQ). Summarizing:
- SG_IO on block layer device: blk_exec*(at_head=false)
- sg device SG_IO: at_head=true
- bsg device SG_IO: at_head=true
Some time ago Boaz Harrosh introduced a sg v4 flag called
BSG_FLAG_Q_AT_TAIL to override the bsg driver default. A
recent patch titled: "sg: add SG_FLAG_Q_AT_TAIL flag"
allowed the sg driver default to be overridden. This patch
allows a SG_IO ioctl sent to a block layer device to have
its default overridden.
ChangeLog:
- introduce SG_FLAG_Q_AT_HEAD flag in sg.h to cause
commands that are injected via a block layer
device SG_IO ioctl to set at_head=true
- make comments clearer about queueing in sg.h since the
header is used both by the sg device and block layer
device implementations of the SG_IO ioctl.
- introduce BSG_FLAG_Q_AT_HEAD in bsg.h for compatibility
(it does nothing) and update comments.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.16-rc4
A few more fixes for this RC cycle. There's a revert of a previous patch
which ended up being the wrong version, so we reverted that commit and
applied a better fix.
CPPI41 got a race condition fix which was found by Thomas Gleixner.
The MSM PHY driver got a runtime pm usage fix so that it wouldn't
kill the PHY while it was still being used.
We also have a fix for a panic caused when removing musb_am335x driver.
Other than that, a few other minor fixes.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
Creating sprout will change the fsid of the mounted root.
do the same on the sysfs as well.
reproducer:
mount /dev/sdb /btrfs (seed disk)
btrfs dev add /dev/sdc /btrfs
mount -o rw,remount /btrfs
btrfs dev del /dev/sdb /btrfs
mount /dev/sdb /btrfs
Error:
kobject_add_internal failed for fe350492-dc28-4051-a601-e017b17e6145 with -EEXIST, don't try to register things with the same name in the same directory.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Even though usb_functionfs_descs_head structure is now deprecated,
it has been used by some user space tools. Its removel in commit
[ac8dde1: “Add flags to descriptors block”] was an oversight
leading to build breakage for such tools.
Bring it back so that old user space tools can still be build
without problems on newer kernel versions.
Cc: <stable@vger.kernel.org> # 3.14
Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
|
error"
This reverts commit f2af74123f8c5a735248547f4286a3adc28633c1.
There is a better fix for this build error coming in a following
patch.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
Use the unified nf_log_packet() interface that allows us explicit
logger selection through the nf_loginfo structure.
If you specify the group attribute, this means you want to receive
logging messages through nfnetlink_log. In that case, the snaplen
and qthreshold attributes allows you to tune internal aspects of
the netlink logging infrastructure.
On the other hand, if the level is specified, then the plain text
format through the kernel logging ring is used instead, which is
also used by default if neither group nor level are indicated.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
|
|
The maximum window size is limited by the sequence gap field, which
was expanded with bd7845337b105e090dd18912d511139945fa7586
("tipc: Expand link sequence gap field to 13 bits")
We remove the artificial limit that prevents the link window to be
set larger than 150.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This has been marked as deprecated for quite some time and the NFLOG
target replacement has been also available since 2006.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
usb: fixes for v3.16-rc2
dwc3-omap won't crash anymore on module removal and suspend/resume won't kill
xHCI interrupts.
MUSB got a fix to handle Babble condition only in host mode, how it should be.
The f_fs function driver got a fix for a NULL pointer dereference.
Renesas gadget got a fix for Status stage handling.
Signed-of-by: Felipe Balbi <balbi@ti.com>
|
|
The TDLS initiator is set once during link setup. If determines the
address ordering in the link identifier IE.
Fix dependent drivers - mwifiex and mac80211.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This is larger than usual: the main reason are the ARM symbol lookup
speedups that came in late and were hard to resist.
There's also a kprobes fix and various tooling fixes, plus the minimal
re-enablement of the mmap2 support interface"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/kprobes: Fix build errors and blacklist context_track_user
perf tests: Add test for closing dso objects on EMFILE error
perf tests: Add test for caching dso file descriptors
perf tests: Allow reuse of test_file function
perf tests: Spawn child for each test
perf tools: Add dso__data_* interface descriptons
perf tools: Allow to close dso fd in case of open failure
perf tools: Add file size check and factor dso__data_read_offset
perf tools: Cache dso data file descriptor
perf tools: Add global count of opened dso objects
perf tools: Add global list of opened dso objects
perf tools: Add data_fd into dso object
perf tools: Separate dso data related variables
perf tools: Cache register accesses for unwind processing
perf record: Fix to honor user freq/interval properly
perf timechart: Reflow documentation
perf probe: Improve error messages in --line option
perf probe: Improve an error message of perf probe --vars mode
perf probe: Show error code and description in verbose mode
perf probe: Improve error message for unknown member of data structure
...
|
