| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights of this round are integrations with fs-verity and
idmapped mounts, the rest is usual mix of minor improvements, speedups
and cleanups.
There are some patches outside of btrfs, namely updating some VFS
interfaces, all straightforward and acked.
Features:
- fs-verity support, using standard ioctls, backward compatible with
read-only limitation on inodes with previously enabled fs-verity
- idmapped mount support
- make mount with rescue=ibadroots more tolerant to partially damaged
trees
- allow raid0 on a single device and raid10 on two devices,
degenerate cases but might be useful as an intermediate step during
conversion to other profiles
- zoned mode block group auto reclaim can be disabled via sysfs knob
Performance improvements:
- continue readahead of node siblings even if target node is in
memory, could speed up full send (on sample test +11%)
- batching of delayed items can speed up creating many files
- fsync/tree-log speedups
- avoid unnecessary work (gains +2% throughput, -2% run time on
sample load)
- reduced lock contention on renames (on dbench +4% throughput,
up to -30% latency)
Fixes:
- various zoned mode fixes
- preemptive flushing threshold tuning, avoid excessive work on
almost full filesystems
Core:
- continued subpage support, preparation for implementing remaining
features like compression and defragmentation; with some
limitations, write is now enabled on 64K page systems with 4K
sectors, still considered experimental
- no readahead on compressed reads
- inline extents disabled
- disabled raid56 profile conversion and mount
- improved flushing logic, fixing early ENOSPC on some workloads
- inode flags have been internally split to read-only and read-write
incompat bit parts, used by fs-verity
- new tree items for fs-verity
- descriptor item
- Merkle tree item
- inode operations extended to be namespace-aware
- cleanups and refactoring
Generic code changes:
- fs: new export filemap_fdatawrite_wbc
- fs: removed sync_inode
- block: bio_trim argument type fixups
- vfs: add namespace-aware lookup"
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reset replace target device to allocation state on close
btrfs: zoned: fix ordered extent boundary calculation
btrfs: do not do preemptive flushing if the majority is global rsv
btrfs: reduce the preemptive flushing threshold to 90%
btrfs: tree-log: check btrfs_lookup_data_extent return value
btrfs: avoid unnecessarily logging directories that had no changes
btrfs: allow idmapped mount
btrfs: handle ACLs on idmapped mounts
btrfs: allow idmapped INO_LOOKUP_USER ioctl
btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
btrfs: allow idmapped SNAP_DESTROY ioctls
btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
btrfs: check whether fsgid/fsuid are mapped during subvolume creation
btrfs: allow idmapped permission inode op
btrfs: allow idmapped setattr inode op
btrfs: allow idmapped tmpfile inode op
btrfs: allow idmapped symlink inode op
btrfs: allow idmapped mkdir inode op
...
|
|
Fix warnings reported by sparse, related to type mismatch between u16
and __le16.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3a29355a22c0 ("gpio: Add virtio-gpio driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
* tip/sched/arm64: (785 commits)
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system
arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0
arm64: Implement task_cpu_possible_mask()
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
Linux 5.14-rc6
lib: use PFN_PHYS() in devmem_is_allowed()
...
|
|
Pull io_uring mkdirat/symlinkat/linkat support from Jens Axboe:
"This adds io_uring support for mkdirat, symlinkat, and linkat"
* tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-block:
io_uring: add support for IORING_OP_LINKAT
io_uring: add support for IORING_OP_SYMLINKAT
io_uring: add support for IORING_OP_MKDIRAT
namei: update do_*() helpers to return ints
namei: make do_linkat() take struct filename
namei: add getname_uflags()
namei: make do_symlinkat() take struct filename
namei: make do_mknodat() take struct filename
namei: make do_mkdirat() take struct filename
namei: change filename_parentat() calling conventions
namei: ignore ERR/NULL names in putname()
|
|
Pull io_uring updates from Jens Axboe:
- cancellation cleanups (Hao, Pavel)
- io-wq accounting cleanup (Hao)
- io_uring submit locking fix (Hao)
- io_uring link handling fixes (Hao)
- fixed file improvements (wangyangbo, Pavel)
- allow updates of linked timeouts like regular timeouts (Pavel)
- IOPOLL fix (Pavel)
- remove batched file get optimization (Pavel)
- improve reference handling (Pavel)
- IRQ task_work batching (Pavel)
- allow pure fixed file, and add support for open/accept (Pavel)
- GFP_ATOMIC RT kernel fix
- multiple CQ ring waiter improvement
- funnel IRQ completions through task_work
- add support for limiting async workers explicitly
- add different clocksource support for timeouts
- io-wq wakeup race fix
- lots of cleanups and improvement (Pavel et al)
* tag 'for-5.15/io_uring-2021-08-30' of git://git.kernel.dk/linux-block: (87 commits)
io-wq: fix wakeup race when adding new work
io-wq: wqe and worker locks no longer need to be IRQ safe
io-wq: check max_worker limits if a worker transitions bound state
io_uring: allow updating linked timeouts
io_uring: keep ltimeouts in a list
io_uring: support CLOCK_BOOTTIME/REALTIME for timeouts
io-wq: provide a way to limit max number of workers
io_uring: add build check for buf_index overflows
io_uring: clarify io_req_task_cancel() locking
io_uring: add task-refs-get helper
io_uring: fix failed linkchain code logic
io_uring: remove redundant req_set_fail()
io_uring: don't free request to slab
io_uring: accept directly into fixed file table
io_uring: hand code io_accept() fd installing
io_uring: openat directly into fixed fd table
net: add accept helper not installing fd
io_uring: fix io_try_cancel_userdata race for iowq
io_uring: IRQ rw completion batching
io_uring: batch task work locking
...
|
|
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
|
|
Pull block updates from Jens Axboe:
"Nothing major in here - lots of good cleanups and tech debt handling,
which is also evident in the diffstats. In particular:
- Add disk sequence numbers (Matteo)
- Discard merge fix (Ming)
- Relax disk zoned reporting restrictions (Niklas)
- Bio error handling zoned leak fix (Pavel)
- Start of proper add_disk() error handling (Luis, Christoph)
- blk crypto fix (Eric)
- Non-standard GPT location support (Dmitry)
- IO priority improvements and cleanups (Damien)o
- blk-throtl improvements (Chunguang)
- diskstats_show() stack reduction (Abd-Alrhman)
- Loop scheduler selection (Bart)
- Switch block layer to use kmap_local_page() (Christoph)
- Remove obsolete disk_name helper (Christoph)
- block_device refcounting improvements (Christoph)
- Ensure gendisk always has a request queue reference (Christoph)
- Misc fixes/cleanups (Shaokun, Oliver, Guoqing)"
* tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits)
sg: pass the device name to blk_trace_setup
block, bfq: cleanup the repeated declaration
blk-crypto: fix check for too-large dun_bytes
blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN
blk-zoned: allow zone management send operations without CAP_SYS_ADMIN
block: mark blkdev_fsync static
block: refine the disk_live check in del_gendisk
mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA
mmc: block: Support alternative_gpt_sector() operation
partitions/efi: Support non-standard GPT location
block: Add alternative_gpt_sector() operation
bio: fix page leak bio_add_hw_page failure
block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT
block: remove a pointless call to MINOR() in device_add_disk
null_blk: add error handling support for add_disk()
virtio_blk: add error handling support for add_disk()
block: add error handling for device_add_disk / add_disk
block: return errors from disk_alloc_events
block: return errors from blk_integrity_add
block: call blk_register_queue earlier in device_add_disk
...
|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache flush updates from Thomas Gleixner:
"A reworked version of the opt-in L1D flush mechanism.
This is a stop gap for potential future speculation related hardware
vulnerabilities and a mechanism for truly security paranoid
applications.
It allows a task to request that the L1D cache is flushed when the
kernel switches to a different mm. This can be requested via prctl().
Changes vs the previous versions:
- Get rid of the software flush fallback
- Make the handling consistent with other mitigations
- Kill the task when it ends up on a SMT enabled core which defeats
the purpose of L1D flushing obviously"
* tag 'x86-cpu-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: Add L1D flushing Documentation
x86, prctl: Hook L1D flushing in via prctl
x86/mm: Prepare for opt-in based L1D flush in switch_mm()
x86/process: Make room for TIF_SPEC_L1D_FLUSH
sched: Add task_work callback for paranoid L1D flush
x86/mm: Refactor cond_ibpb() to support other use cases
x86/smp: Add a per-cpu view of SMT state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify speedups when notification actually isn't used and support
for identifying processes which caused fanotify events through pidfd
instead of normal pid"
* tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize the case of no marks of any type
fsnotify: count all objects with attached connectors
fsnotify: count s_fsnotify_inode_refs for attached connectors
fsnotify: replace igrab() with ihold() on attach connector
fanotify: add pidfd support to the fanotify API
fanotify: introduce a generic info record copying helper
fanotify: minor cosmetic adjustments to fid labels
kernel/pid.c: implement additional checks upon pidfd_create() parameters
kernel/pid.c: remove static qualifier from pidfd_create()
|
|
Also add a stat counter for this that gets exported both via old /proc
interface and ctnetlink.
Assuming the old default size of 16536 buckets and max hash occupancy of
64k, this results in 128k insertions (origin+reply), so ~8 entries per
chain on average.
The revised settings in this series will result in about two entries per
bucket on average.
This allows a hard-limit ceiling of 64.
This is not tunable at the moment, but its possible to either increase
nf_conntrack_buckets or decrease nf_conntrack_max to reduce average
lengths.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We allow updating normal timeouts, add support for adjusting timings of
linked timeouts as well.
Reported-by: Victor Stewart <v@nametag.social>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than
CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC.
Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that
allows timeouts and linked timeouts to use the selected clock source.
Only one clock source may be selected, and we -EINVAL the request if more
than one is given. If neither BOOTIME nor REALTIME are selected, the
previous default of MONOTONIC is used.
Link: https://github.com/axboe/liburing/issues/369
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the
PCI Express PASID capability is 0 and pasid is enabled. Make sure that the
WQCFG priv field is set correctly according to usage type. Reject config if
setting up kernel WQ type and no support. Also add the correct priv setup
for a descriptor.
Fixes: 484f910e93b4 ("dmaengine: idxd: fix wq config registers offset programming")
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-08-27
1) Remove an unneeded extra variable in esp4 esp_ssg_unref.
From Corey Minyard.
2) Add a configuration option to change the default behaviour
to block traffic if there is no matching policy.
Joint work with Christian Langrock and Antony Antony.
3) Fix a shift-out-of-bounce bug reported from syzbot.
From Pavel Skripkin.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The identifier names in the documentation here didn't match
the real ones, and the reserved was missing. Fix that.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The motivation behind this helper is to access userspace pt_regs in a
kprobe handler.
uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace
pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a
kprobe handler. The final case (kernelspace pt_regs in uprobe) is
pretty rare (usermode helper) so I think that can be solved later if
necessary.
More concretely, this helper is useful in doing BPF-based DWARF stack
unwinding. Currently the kernel can only do framepointer based stack
unwinds for userspace code. This is because the DWARF state machines are
too fragile to be computed in kernelspace [0]. The idea behind
DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace
stack (while in prog context) and send it up to userspace for unwinding
(probably with libunwind) [1]. This would effectively enable profiling
applications with -fomit-frame-pointer using kprobes and uprobes.
[0]: https://lkml.org/lkml/2012/2/10/356
[1]: https://github.com/danobi/bpf-dwarf-walk
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
|
|
Instead of opening a file into a process's file table as usual and then
registering the fd within io_uring, some users may want to skip the
first step and place it directly into io_uring's fixed file table.
This patch adds such a capability for IORING_OP_OPENAT and
IORING_OP_OPENAT2.
The behaviour is controlled by setting sqe->file_index, where 0 implies
the old behaviour using normal file tables. If non-zero value is
specified, then it will behave as described and place the file into a
fixed file slot sqe->file_index - 1. A file table should be already
created, the slot should be valid and empty, otherwise the operation
will fail.
Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and
EINVAL on inappropriate fixed tables, and return EBADF on collision with
already registered file.
Note: IOSQE_FIXED_FILE can't be used to switch between modes, because
accept takes a file, and it already uses the flag with a different
meaning.
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, there are many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to change it by ethtool private flags. In order to make it
more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and
'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these
parameters can be accessed by ethtool netlink coalesce uAPI.
Also add an new structure kernel_ethtool_coalesce, then the
new parameter can be added into this struct.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
|
|
IORING_OP_LINKAT behaves like linkat(2) and takes the same flags and
arguments.
In some internal places 'hardlink' is used instead of 'link' to avoid
confusion with the SQE links. Name 'link' conflicts with the existing
'link' member of io_kiocb.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-12-dkadashev@gmail.com
[axboe: add splice_fd_in check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_OP_SYMLINKAT behaves like symlinkat(2) and takes the same flags
and arguments.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-11-dkadashev@gmail.com
[axboe: add splice_fd_in check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_OP_MKDIRAT behaves like mkdirat(2) and takes the same flags
and arguments.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20210708063447.3556403-10-dkadashev@gmail.com
[axboe: add splice_fd_in check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 819fbd3d8ef36c09576c2a0ffea503f5c46e9177.
It turns out that some user-space applications use these uapi header
files, so even though the only user of the interface is an old driver
that was moved to staging, moving the header files causes unnecessary
pain.
Generally, we really don't want user space to use kernel headers
directly (exactly because it causes pain when we re-organize), and
instead copy them as needed. But these things happen, and the headers
were in the uapi directory, so I guess it's not entirely unreasonable.
Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/
Reported-by: Soeren Moch <smoch@web.de>
Cc: stable@kernel.org # 5.13
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch adds a new driver for Virtio based GPIO devices.
This allows a guest VM running Linux to access GPIO lines provided by
the host. It supports all basic operations, except interrupts for the
GPIO lines.
Based on the initial work posted by:
"Enrico Weigelt, metux IT consult" <lkml@metux.net>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Add new types of KVM stats, linear and logarithmic histogram.
Histogram are very useful for observing the value distribution
of time or size related stats.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-2-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Minor updates:
* BSS coloring support
* MEI commands for Intel platforms
* various fixes/cleanups
* tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
cfg80211: fix BSS color notify trace enum confusion
mac80211: Fix insufficient headroom issue for AMSDU
mac80211: add support for BSS color change
nl80211: add support for BSS coloring
mac80211: Use flex-array for radiotap header bitmap
mac80211: radiotap: Use BIT() instead of shifts
mac80211: Remove unnecessary variable and label
mac80211: include <linux/rbtree.h>
mac80211: Fix monitor MTU limit so that A-MSDUs get through
mac80211: remove unnecessary NULL check in ieee80211_register_hw()
mac80211: Reject zero MAC address in sta_info_insert_check()
nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage
====================
Link: https://lore.kernel.org/r/20210820105329.48674-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The per-vlan router option controls the port/vlan and host vlan entries'
mcast router config. The global option controlled only the host vlan
config, but that is unnecessary and incosistent as it's not really a
global vlan option, but rather bridge option to control host router
config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to
BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host
vlan and port vlan mcast router config.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an I2C bus driver for virtio para-virtualization.
The controller can be emulated by the backend driver in
any device model software by following the virtio protocol.
The device specification can be found on
https://lists.oasis-open.org/archives/virtio-comment/202101/msg00008.html.
By following the specification, people may implement different
backend drivers to emulate different controllers according to
their needs.
Co-developed-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The default IO priority is the best effort (BE) class with the
normal priority level IOPRIO_NORM (4). However, get_task_ioprio()
returns IOPRIO_CLASS_NONE/IOPRIO_NORM as the default priority and
get_current_ioprio() returns IOPRIO_CLASS_NONE/0. Let's be consistent
with the defined default and have both of these functions return the
default priority IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM) when
the user did not define another default IO priority for the task.
In include/uapi/linux/ioprio.h, introduce the IOPRIO_BE_NORM macro as
an alias to IOPRIO_NORM to clarify that this default level applies to
the BE priotity class. In include/linux/ioprio.h, define the macro
IOPRIO_DEFAULT as IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_BE_NORM)
and use this new macro when setting a priority to the default.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-7-damien.lemoal@wdc.com
[axboe: drop unnecessary lightnvm change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The BFQ scheduler and ioprio_check_cap() both assume that the RT
priority class (IOPRIO_CLASS_RT) can have up to 8 different priority
levels, similarly to the BE class (IOPRIO_CLASS_iBE). This is
controlled using the IOPRIO_BE_NR macro , which is badly named as the
number of levels also applies to the RT class.
Introduce the class independent IOPRIO_NR_LEVELS macro, defined to 8,
to make things clear. Keep the old IOPRIO_BE_NR macro definition as an
alias for IOPRIO_NR_LEVELS.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-6-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ki_ioprio field of struct kiocb is 16-bits (u16) but often handled
as an int in the block layer. E.g. ioprio_check_cap() takes an int as
argument.
With such implicit int casting function calls, the upper 16-bits of the
int argument may be left uninitialized by the compiler, resulting in
invalid values for the IOPRIO_PRIO_CLASS() macro (garbage upper bits)
and in an error return for functions such as ioprio_check_cap().
Fix this by masking the result of the shift by IOPRIO_CLASS_SHIFT bits
in the IOPRIO_PRIO_CLASS() macro. The new macro IOPRIO_CLASS_MASK
defines the 3-bits mask for the priority class.
Similarly, apply the IOPRIO_PRIO_MASK mask to the data argument of the
IOPRIO_PRIO_VALUE() macro to ignore the upper bits of the data value.
The IOPRIO_CLASS_MASK mask is also applied to the class argument of this
macro before shifting the result by IOPRIO_CLASS_SHIFT bits.
While at it, also change the argument name of the IOPRIO_PRIO_CLASS()
and IOPRIO_PRIO_DATA() macros from "mask" to "ioprio" to reflect the
fact that a priority value should be passed rather than a mask.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-5-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change the ioprio_valid() macro in include/usapi/linux/ioprio.h to an
inline function declared on the kernel side in include/linux/ioprio.h.
Also improve checks on the class value by checking the upper bound
value.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In include/usapi/linux/ioprio.h, change the ioprio class enum comment
to remove the outdated reference to CFQ and mention BFQ and mq-deadline
instead. Also document the high priority NCQ command use for RT class
IOs directed at ATA drives that support NCQ priority.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210811033702.368488-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch added and managed a new per endpoint flag, named
MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead
of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After
releaseing the pm lock loop on such array and create a subflow for each
remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow
remote address.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Including one's name in copyright claims is appropriate. Including it
in random comments is just vanity. After 2 decades, it is time for
these to be gone.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch adds support for BSS color collisions to the wireless subsystem.
Add the required functionality to nl80211 that will notify about color
collisions, triggering the color change and notifying when it is completed.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/500b3582aec8fe2c42ef46f3117b148cb7cbceb5.1625247619.git.lorenzo@kernel.org
[remove unnecessary NULL initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
|
|
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
|
|
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
|
|
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST means the input
external clock signal for SerDes is too weak or lost.
ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS means the received signal for
SerDes is too weak because analog loss of signal.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring, so to
delete uapi/linux/ipx.h and net/ipx.h header files for good.
additionally, there is no module that depends on ipx.h except
a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the new mcast querier state dump infrastructure and export vlans'
mcast context querier state embedded in attribute
BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for dumping global IPv6 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
IPv4 and IPv6 attributes are embedded at the same level of
IFLA_BR_MCAST_QUERIER_STATE. If we didn't dump anything we cancel the nest
and return.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for dumping global IPv4 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
