summaryrefslogtreecommitdiff
path: root/include/uapi/linux
AgeCommit message (Collapse)Author
2022-07-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-07-20 1) Don't set DST_NOPOLICY in IPv4, a recent patch made this superfluous. From Eyal Birger. 2) Convert alg_key to flexible array member to avoid an iproute2 compile warning when built with gcc-12. From Stephen Hemminger. 3) xfrm_register_km and xfrm_unregister_km do always return 0 so change the type to void. From Zhengchao Shao. 4) Fix spelling mistake in esp6.c From Zhang Jiaming. 5) Improve the wording of comment above XFRM_OFFLOAD flags. From Petr Vaněk. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25USB: cdc: add serial-state definesJohan Hovold
Add defines for the serial-state bitmap values from section 6.3.5 SerialState of the CDC specification version 1.1. Note that the bTxCarrier and bRxCarrier bits have been named after their RS-232 signal equivalents DSR and DCD. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220725075841.1187-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-25USB: cdc: add control-signal definesJohan Hovold
Add defines for the Control Signal Bitmap Values from section 6.2.14 SetControlLineState of the CDC specification version 1.1. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220725075841.1187-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-24io_uring: add zc notification flush requestsPavel Begunkov
Overlay notification control onto IORING_OP_RSRC_UPDATE (former IORING_OP_FILES_UPDATE). It allows to flush a range of zc notifications from slots with indexes [sqe->off, sqe->off+sqe->len). If sqe->arg is not zero, it also copies sqe->arg as a new tag for all flushed notifications. Note, it doesn't flush a notification of a slot if there was no requests attached to it (since last flush or registration). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/df13e2363400682a73dd9e71c3b990b8d1ff0333.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: rename IORING_OP_FILES_UPDATEPavel Begunkov
IORING_OP_FILES_UPDATE will be a more generic opcode serving different resource types, rename it into IORING_OP_RSRC_UPDATE and add subtype handling. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0a907133907d9af3415a8a7aa1802c6aa97c03c6.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: flush notifiers after sendzcPavel Begunkov
Allow to flush notifiers as a part of sendzc request by setting IORING_SENDZC_FLUSH flag. When the sendzc request succeedes it will flush the used [active] notifier. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e0b4d9a6797e2fd6092824fe42953db7a519bbc8.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: sendzc with fixed buffersPavel Begunkov
Allow zerocopy sends to use fixed buffers. There is an optimisation for this case, the network layer don't need to reference the pages, see SKBFL_MANAGED_FRAG_REFS, so io_uring have to ensure validity of fixed buffers until the notifier is released. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/e1d8bd1b5934e541d90c1824eb4020ae3f5f43f3.1657643355.git.asml.silence@gmail.com [axboe: fold in 32-bit pointer cast warning fix] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: allow to pass addr into sendzcPavel Begunkov
Allow to specify an address to zerocopy sends making it more like sendto(2). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/70417a8f7c5b51ab454690bae08adc0c187f89e8.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: wire send zc request typePavel Begunkov
Add a new io_uring opcode IORING_OP_SENDZC. The main distinction from IORING_OP_SEND is that the user should specify a notification slot index in sqe::notification_idx and the buffers are safe to reuse only when the used notification is flushed and completes. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a80387c6a68ce9cf99b3b6ef6f71068468761fb7.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add notification slot registrationPavel Begunkov
Let the userspace to register and unregister notification slots. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a0aa8161fe3ebb2a4cc6e5dbd0cffb96e6881cf5.1657643355.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: support multishot in recvmsgDylan Yudaken
Similar to multishot recv, this will require provided buffers to be used. However recvmsg is much more complex than recv as it has multiple outputs. Specifically flags, name, and control messages. Support this by introducing a new struct io_uring_recvmsg_out with 4 fields. namelen, controllen and flags match the similar out fields in msghdr from standard recvmsg(2), payloadlen is the length of the payload following the header. This struct is placed at the start of the returned buffer. Based on what the user specifies in struct msghdr, the next bytes of the buffer will be name (the next msg_namelen bytes), and then control (the next msg_controllen bytes). The payload will come at the end. The return value in the CQE is the total used size of the provided buffer. Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220714110258.1336200-4-dylany@fb.com [axboe: style fixups, see link] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: multishot recvDylan Yudaken
Support multishot receive for io_uring. Typical server applications will run a loop where for each recv CQE it requeues another recv/recvmsg. This can be simplified by using the existing multishot functionality combined with io_uring's provided buffers. The API is to add the IORING_RECV_MULTISHOT flag to the SQE. CQEs will then be posted (with IORING_CQE_F_MORE flag set) when data is available and is read. Once an error occurs or the socket ends, the multishot will be removed and a completion without IORING_CQE_F_MORE will be posted. The benefit to this is that the recv is much more performant. * Subsequent receives are queued up straight away without requiring the application to finish a processing loop. * If there are more data in the socket (sat the provided buffer size is smaller than the socket buffer) then the data is immediately returned, improving batching. * Poll is only armed once and reused, saving CPU cycles Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220630091231.1456789-11-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: let to set a range for file slot allocationPavel Begunkov
From recently io_uring provides an option to allocate a file index for operation registering fixed files. However, it's utterly unusable with mixed approaches when for a part of files the userspace knows better where to place it, as it may race and users don't have any sane way to pick a slot and hoping it will not be taken. Let the userspace to register a range of fixed file slots in which the auto-allocation happens. The use case is splittting the fixed table in two parts, where on of them is used for auto-allocation and another for slot-specified operations. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/66ab0394e436f38437cf7c44676e1920d09687ad.1656154403.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add support for passing fixed file descriptorsJens Axboe
With IORING_OP_MSG_RING, one ring can send a message to another ring. Extend that support to also allow sending a fixed file descriptor to that ring, enabling one ring to pass a registered descriptor to another one. Arguments are extended to pass in: sqe->addr3 fixed file slot in source ring sqe->file_index fixed file slot in destination ring IORING_OP_MSG_RING is extended to take a command argument in sqe->addr. If set to zero (or IORING_MSG_DATA), it sends just a message like before. If set to IORING_MSG_SEND_FD, a fixed file descriptor is sent according to the above arguments. Two common use cases for this are: 1) Server needs to be shutdown or restarted, pass file descriptors to another onei 2) Backend is split, and one accepts connections, while others then get the fd passed and handle the actual connection. Both of those are classic SCM_RIGHTS use cases, and it's not possible to support them with direct descriptors today. By default, this will post a CQE to the target ring, similarly to how IORING_MSG_DATA does it. If IORING_MSG_RING_CQE_SKIP is set, no message is posted to the target ring. The issuer is expected to notify the receiver side separately. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add sync cancelation API through io_uring_register()Jens Axboe
The io_uring cancelation API is async, like any other API that we expose there. For the case of finding a request to cancel, or not finding one, it is fully sync in that when submission returns, the CQE for both the cancelation request and the targeted request have been posted to the CQ ring. However, if the targeted work is being executed by io-wq, the API can only start the act of canceling it. This makes it difficult to use in some circumstances, as the caller then has to wait for the CQEs to come in and match on the same cancelation data there. Provide a IORING_REGISTER_SYNC_CANCEL command for io_uring_register() that does sync cancelations, always. For the io-wq case, it'll wait for the cancelation to come in before returning. The only expected returns from this API is: 0 Request found and canceled fine. > 0 Requests found and canceled. Only happens if asked to cancel multiple requests, and if the work wasn't in progress. -ENOENT Request not found. -ETIME A timeout on the operation was requested, but the timeout expired before we could cancel. and we won't get -EALREADY via this API. If the timeout value passed in is -1 (tv_sec and tv_nsec), then that means that no timeout is requested. Otherwise, the timespec passed in is the amount of time the sync cancel will wait for a successful cancelation. Link: https://github.com/axboe/liburing/discussions/608 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add IORING_ASYNC_CANCEL_FD_FIXED cancel flagJens Axboe
In preparation for not having a request to pass in that carries this state, add a separate cancelation flag that allows the caller to ask for a fixed file for cancelation. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add IORING_SETUP_SINGLE_ISSUERPavel Begunkov
Add a new IORING_SETUP_SINGLE_ISSUER flag and the userspace visible part of it, i.e. put limitations of submitters. Also, don't allow it together with IOPOLL as we're not going to put it to good use. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/4bcc41ee467fdf04c8aab8baf6ce3ba21858c3d4.1655371007.git.asml.silence@gmail.com Reviewed-by: Hao Xu <howeyxu@tencent.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24io_uring: add support for level triggered pollJens Axboe
By default, the POLL_ADD command does edge triggered poll - if we get a non-zero mask on the initial poll attempt, we complete the request successfully. Support level triggered by always waiting for a notification, regardless of whether or not the initial mask matches the file state. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR - Fix use of sched_setaffinity in selftests - Sync kernel headers to tools - Fix KVM_STATS_UNIT_MAX * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Protect the unused bits in MSR exiting flags tools headers UAPI: Sync linux/kvm.h with the kernel sources KVM: selftests: Fix target thread to be migrated in rseq_test KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
2022-07-22Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== bpf-next 2022-07-22 We've added 73 non-merge commits during the last 12 day(s) which contain a total of 88 files changed, 3458 insertions(+), 860 deletions(-). The main changes are: 1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai. 2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel syscalls through kprobe mechanism, from Andrii Nakryiko. 3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function, from Song Liu & Jiri Olsa. 4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi. 5) Add a ksym BPF iterator to allow for more flexible and efficient interactions with kernel symbols, from Alan Maguire. 6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter. 7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov. 8) libbpf support for writing custom perf event readers, from Jon Doron. 9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar. 10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski. 11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin. 12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev. 13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui. 14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong. 15) Make non-prealloced BPF map allocations low priority to play better with memcg limits, from Yafang Shao. 16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao. 17) Various smaller cleanups and improvements all over the place. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits) bpf: Simplify bpf_prog_pack_[size|mask] bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch) bpf, x64: Allow to use caller address from stack ftrace: Allow IPMODIFY and DIRECT ops on the same function ftrace: Add modify_ftrace_direct_multi_nolock bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF selftests/bpf: Fix test_verifier failed test in unprivileged mode selftests/bpf: Add negative tests for new nf_conntrack kfuncs selftests/bpf: Add tests for new nf_conntrack kfuncs selftests/bpf: Add verifier tests for trusted kfunc args net: netfilter: Add kfuncs to set and change CT status net: netfilter: Add kfuncs to set and change CT timeout net: netfilter: Add kfuncs to allocate and insert CT net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup bpf: Add documentation for kfuncs bpf: Add support for forcing kfunc args to be trusted bpf: Switch to new kfunc flags infrastructure tools/resolve_btfids: Add support for 8-byte BTF sets bpf: Introduce 8-byte BTF set ... ==================== Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22ublk_drv: make sure that correct flags(features) returned to userspaceMing Lei
Userspace may support more features or new added flags, but the driver side can be old, so make sure correct flags(features) returned to userpsace, then userspace can work as expected. Also mark the 2nd flags as reversed, just use the 1st one. When we run out of flags, the reserved one can be handled at that time. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-22wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX APIJohannes Berg
Allow optionally specifying the link ID to transmit on, which can be done instead of the link frequency, on an MLD addressed frame. Both can also be omitted in which case the frame must be MLD addressed and link selection (and address translation) will be done on lower layers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: nl80211: add RX and TX timestamp attributesAvraham Stern
Add attributes for reporting hardware timestamps for management frames RX and TX. These attributes will be used for reporting hardware timestamps for Timing measurement and Fine Timing Measurement action frames, which will allow userspace applications to measure the path delay between devices and sync clocks. For TX, these attributes are used for reporting the frame RX time and the ack TX time. For TX, they are used for reporting the frame TX time and the ack RX time. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: nl80211/mac80211: clarify link ID in control port TXJohannes Berg
Clarify the link ID behaviour in control port TX, we need it to select the link to transmit on for both MLD and non-MLD receivers, but select the link address as the SA only if the receiver is not an MLD. Fixes: 67207bab9341 ("wifi: cfg80211/mac80211: Support control port TX from specific link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21ublk: remove UBLK_IO_F_PREFLUSHChristoph Hellwig
REQ_PREFLUSH is turned into REQ_OP_FLUSH by the flush state machine and thus never seen by a blk-mq based driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220721130916.1869719-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21dmaengine: idxd: Correct IAX operation code namesFenghua Yu
Some IAX operation code nomenclatures are misleading or don't match with others: 1. Operation code 0x4c is Zero Compress 32. IAX_OPCODE_DECOMP_32 is a misleading name. Change it to IAX_OPCODE_ZERO_COMP_32. 2. Operation code 0x4d is Zero Compress 16. IAX_OPCODE_DECOMP_16 is a misleading name. Change it to IAX_OPCODE_ZERO_COMP_16. 3. IAX_OPCDE_FIND_UNIQUE is corrected to match with other nomenclatures. Co-developed-by: Li Zhang <li4.zhang@intel.com> Signed-off-by: Li Zhang <li4.zhang@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220707002052.1546361-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-20KVM: s390: resetting the Topology-Change-ReportPierre Morel
During a subsystem reset the Topology-Change-Report is cleared. Let's give userland the possibility to clear the MTCR in the case of a subsystem reset. To migrate the MTCR, we give userland the possibility to query the MTCR state. We indicate KVM support for the CPU topology facility with a new KVM capability: KVM_CAP_S390_CPU_TOPOLOGY. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com> Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/ [frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-07-20can: error: add definitions for the different CAN error thresholdsVincent Mailhol
Currently, drivers are using magic numbers to derive the CAN error states from the error counter. Add three macro declarations to remediate this. For reference, the error-active, error-passive and bus-off are defined in ISO 11898, section 12.1.4.2 "Error counting". Although ISO 11898 does not define error-warning state, this extra value is also commonly used and is thus also added. Link: https://lore.kernel.org/all/20220719143550.3681-13-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: add CAN_ERR_CNT flag to notify availability of error counterVincent Mailhol
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: error: specify the values of data[5..7] of CAN error framesVincent Mailhol
Currently, data[5..7] of struct can_frame, when used as a CAN error frame, are defined as being "controller specific". Device specific behaviours are problematic because it prevents someone from writing code which is portable between devices. As a matter of fact, data[5] is never used, data[6] is always used to report TX error counter and data[7] is always used to report RX error counter. can-utils also relies on this. This patch updates the comment in the uapi header to specify that data[5] is reserved (and thus should not be used) and that data[6..7] are used for error counters. Fixes: 0d66548a10cb ("[CAN]: Add PF_CAN core module") Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-19PCI/DOE: Add DOE mailbox support functionsJonathan Cameron
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based mailbox with standard protocol discovery. Each mailbox is accessed through a DOE Extended Capability. Each DOE mailbox must support the DOE discovery protocol in addition to any number of additional protocols. Define core PCIe functionality to manage a single PCIe DOE mailbox at a defined config space offset. Functionality includes iterating, creating, query of supported protocol, and task submission. Destruction of the mailboxes is device managed. Cc: "Li, Ming" <ming4.li@intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Co-developed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-4-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-19bpf: fix bpf_skb_pull_data documentationJoanne Koong
Fix documentation for bpf_skb_pull_data() helper for when len == 0. Fixes: fa15601ab31e ("bpf: add documentation for eBPF helpers (33-41)") Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Acked-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20220715193800.3940070-1-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-07-19KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean statsOliver Upton
commit 1b870fa5573e ("kvm: stats: tell userspace which values are boolean") added a new stat unit (boolean) but failed to raise KVM_STATS_UNIT_MAX. Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN. Fixes: 1b870fa5573e ("kvm: stats: tell userspace which values are boolean") Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20220719125229.2934273-1-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-18ublk: remove UBLK_IO_F_INTEGRITYChristoph Hellwig
The ublk protocol has no mechanism to actually transfer the integrity metadata, so don't define this flag, which requires that an integrity payload is attached to a bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220718063013.335531-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-18net/smc: Extend SMC-R link group netlink attributeWen Gu
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR. Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of SMC-R link group. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-17Merge tag 'input-for-v5.19-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fix Goodix driver to properly behave on the Aya Neo Next - some more sanity checks in usbtouchscreen driver - a tweak in wm97xx driver in preparation for remove() to return void - a clarification in input core regarding units of measurement for resolution on touch events. * tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the units for resolution of size axes Input: goodix - call acpi_device_fix_up_power() in some cases Input: wm97xx - make .remove() obviously always return 0 Input: usbtouchscreen - add driver_info sanity check
2022-07-17media: Add P010 tiled formatEzequiel Garcia
Add P010 tiled format [rebased, updated pixel format name and added description] Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-16Merge tag 'tty-5.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver fixes from Greg KH: "Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a number of reported problems including: - longtime bug in pty_write() that has been reported in the past. - 8250 driver fixes - new serial device ids - vt overlapping data copy bugfix - other tiny serial driver bugfixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: use new tty_insert_flip_string_and_push_buffer() in pty_write() tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push() serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST vt: fix memory overlapping when deleting chars in the buffer serial: mvebu-uart: correctly report configured baudrate value serial: 8250: Fix PM usage_count for console handover serial: 8250: fix return error code in serial8250_request_std_resource() serial: stm32: Clear prev values before setting RTS delays tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver serial: 8250: Fix __stop_tx() & DMA Tx restart races serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle tty: serial: samsung_tty: set dma burst_size to 1 serial: 8250: dw: enable using pdata with ACPI
2022-07-16serial: remove VR41XX serial driverThomas Bogendoerfer
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "RISC-V: - Fix missing PAGE_PFN_MASK - Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests() x86: - Fix for nested virtualization when TSC scaling is active - Estimate the size of fastcc subroutines conservatively, avoiding disastrous underestimation when return thunks are enabled - Avoid possible use of uninitialized fields of 'struct kvm_lapic_irq' Generic: - Mark as such the boolean values available from the statistics file descriptors - Clarify statistics documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: emulate: do not adjust size of fastop and setcc subroutines KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op() Documentation: kvm: clarify histogram units kvm: stats: tell userspace which values are boolean x86/kvm: fix FASTOP_SIZE when return thunks are enabled KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1 RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests() riscv: Fix missing PAGE_PFN_MASK
2022-07-15media: uapi: move HEVC stateless controls out of stagingBenjamin Gaignard
HEVC uAPI is used by 2 mainline drivers (Hantro, Cedrus) and at least 2 out-of-tree drivers (rkvdec, RPi). The uAPI has been reviewed so it is time to make it 'public' by un-staging it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: uapi: Move the HEVC stateless control type out of stagingBenjamin Gaignard
Move the HEVC stateless controls types out of staging, and re-number them. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: uapi: Move parsed HEVC pixel format out of stagingBenjamin Gaignard
Move HEVC pixel format since we are ready to stabilize the uAPI Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAYHans Verkuil
Add a new flag that indicates that this control is a dynamically sized array. Also document this flag. Currently dynamically sized arrays are limited to one dimensional arrays, but that might change in the future if there is a need for it. The initial use-case of dynamic arrays are stateless codecs. A frame can be divided in many slices, so you want to provide an array containing slice information for each slice. Typically the number of slices is small, but the standard allow for hundreds or thousands of slices. Dynamic arrays are a good solution since sizing the array for the worst case would waste substantial amounts of memory. Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: v4l2: Make colorspace validity checks more future-proofLaurent Pinchart
The helper functions that test validity of colorspace-related fields use the last value of the corresponding enums. This isn't very future-proof, as there's a high chance someone adding a new value may forget to update the helpers. Add new "LAST" entries to the enumerations to improve this, and keep them private to the kernel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: v4l: Add packed YUV 4:4:4 YUVA and YUVX pixel formatsLaurent Pinchart
The new YUVA and YUVX are permutations of the existing AYUV and XYUV formats. They are use by the NXP i.MX8 ISI hardware. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15wifi: nl80211: add EML/MLD capabilities to per-iftype capabilitiesJohannes Berg
We have the per-interface type capabilities, currently for extended capabilities, add the EML/MLD capabilities there to have this advertised by the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add API to add/modify/remove a link stationShaul Triebitz
Add an API for adding/modifying/removing a link of a station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 18:41:49 +0000