Age | Commit message (Collapse) | Author |
|
Implement the data plane of on-demand read mode.
The early implementation [1] place the entry to
cachefiles_ondemand_read() in fscache_read(). However, fscache_read()
can only detect if the requested file range is fully cache miss, whilst
we need to notify the user daemon as long as there's a hole inside the
requested file range.
Thus the entry is now placed in cachefiles_prepare_read(). When working
in on-demand read mode, once a hole detected, the read routine will send
a READ request to the user daemon. The user daemon needs to fetch the
data and write it to the cache file. After sending the READ request, the
read routine will hang there, until the READ request is handled by the
user daemon. Then it will retry to read from the same file range. If no
progress encountered, the read routine will fail then.
A new NETFS_SREQ_ONDEMAND flag is introduced to indicate that on-demand
read should be done when a cache miss encountered.
[1] https://lore.kernel.org/all/20220406075612.60298-6-jefflexu@linux.alibaba.com/ #v8
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-6-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Notify the user daemon that cookie is going to be withdrawn, providing a
hint that the associated anonymous fd can be closed.
Be noted that this is only a hint. The user daemon may close the
associated anonymous fd when receiving the CLOSE request, then it will
receive another anonymous fd when the cookie gets looked up. Or it may
ignore the CLOSE request, and keep writing data through the anonymous
fd. However the next time the cookie gets looked up, the user daemon
will still receive another new anonymous fd.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-5-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Fscache/CacheFiles used to serve as a local cache for a remote
networking fs. A new on-demand read mode will be introduced for
CacheFiles, which can boost the scenario where on-demand read semantics
are needed, e.g. container image distribution.
The essential difference between these two modes is seen when a cache
miss occurs: In the original mode, the netfs will fetch the data from
the remote server and then write it to the cache file; in on-demand
read mode, fetching the data and writing it into the cache is delegated
to a user daemon.
As the first step, notify the user daemon when looking up cookie. In
this case, an anonymous fd is sent to the user daemon, through which the
user daemon can write the fetched data to the cache file. Since the user
daemon may move the anonymous fd around, e.g. through dup(), an object
ID uniquely identifying the cache file is also attached.
Also add one advisory flag (FSCACHE_ADV_WANT_CACHE_SIZE) suggesting that
the cache file size shall be retrieved at runtime. This helps the
scenario where one cache file contains multiple netfs files, e.g. for
the purpose of deduplication. In this case, netfs itself has no idea the
size of the cache file, whilst the user daemon should give the hint on
it.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-3-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The typedefs u32 and u64 are not available in userspace. Thus user get
an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B:
$ gcc -Wall -c -MMD -c -o ioctls_list.o ioctls_list.c
In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1,
from /usr/include/linux/ioctl.h:5,
from /usr/include/asm-generic/ioctls.h:5,
from ioctls_list.c:11:
ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function)
463 | { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function)
464 | { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
The issue was initially reported here[1].
[1]: https://github.com/jerome-pouiller/ioctl/pull/14
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a5bff92eaac4 ("dma-buf: Fix SET_NAME ioctl uapi")
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220517072708.245265-1-Jerome.Pouiller@silabs.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Some platforms with an Intel IPU3 have an IR sensor producing 10 bit
greyscale format data that is transmitted over a CSI-2 bus to a CIO2
device - this packs the data into 32 bytes per 25 pixels. Add an entry
to the uAPI header defining that format.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Usually the ISO 15765-2 protocol is a point-to-point protocol to transfer
segmented PDUs to a dedicated receiver. This receiver sends a flow control
message to specify protocol options and timings (e.g. block size / STmin).
The so called functional addressing communication allows a 1:N
communication but is limited to a single frame length.
This new CAN_ISOTP_CF_BROADCAST allows an unconfirmed 1:N communication
with PDU length that would not fit into a single frame. This feature is
not covered by the ISO 15765-2 standard.
Link: https://lore.kernel.org/all/20220507115558.19065-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no macro called _IORW, so use _IOWR in the comment instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220516101202.88373-1-thuth@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It's only internally used as another way to represent btrfs profiles,
it's not exposed through any on-disk format, in fact this
btrfs_raid_types is diverted from the on-disk format values.
Furthermore, since it's internal structure, its definition can change in
the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
New netlink attributes IFLA_TSO_MAX_SIZE and IFLA_TSO_MAX_SEGS
are used to report to user-space the device TSO limits.
ip -d link sh dev eth1
...
tso_max_size 65536 tso_max_segs 65535
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These were only implemented by the IDE CD driver, which has since
been removed. Given that nobody is likely to create new CD/DVD
hardware (and associated drivers) we can mark these appropriately.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/all/20220427132436.12795-3-paul.gortmaker@windriver.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-4-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
add an accept_flag IORING_ACCEPT_MULTISHOT for accept, which is to
support multishot.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/20220514142046.58072-2-haoxu.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We've had all the necessary changes ready for both shmem and hugetlbfs.
Turn on all the shmem/hugetlbfs switches for userfaultfd-wp.
We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too
because all existing types now support write protection mode.
Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h.
Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently to setup a fully sparse descriptor space upfront, the app needs
to alloate an array of the full size and memset it to -1 and then pass
that in. Make this a bit easier by allowing a flag that simply does
this internally rather than needing to copy each slot separately.
This works with IORING_REGISTER_FILES2 as the flag is set in struct
io_uring_rsrc_register, and is only allow when the type is
IORING_RSRC_FILE as this doesn't make sense for registered buffers.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the application passes in IORING_FILE_INDEX_ALLOC as the file_slot,
then that's a hint to allocate a fixed file descriptor rather than have
one be passed in directly.
This can be useful for having io_uring manage the direct descriptor space.
Normal open direct requests will complete with 0 for success, and < 0
in case of error. If io_uring is asked to allocated the direct descriptor,
then the direct descriptor is returned in case of success.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 35d0f1d54ecd ("include/uapi/linux/agpgart.h: include stdlib.h in
userspace") included <stdlib.h> to fix the unknown size_t error, but
I do not think it is the right fix.
This header already uses __kernel_size_t a few lines below.
Replace the remaining size_t, and stop including <stdlib.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
This is very theoretical compile failure:
ELF_ST_TYPE(st_info = A)
Cast will bind first and st_info will stop being lvalue:
error: lvalue required as left operand of assignment
Given that the only use of this macro is
ELF_ST_TYPE(sym->st_info)
where st_info is "unsigned char" I've decided to remove cast especially
given that companion macro ELF_ST_BIND doesn't use cast.
Link: https://lkml.kernel.org/r/Ymv7G1BeX4kt3obz@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No conflicts.
Build issue in drivers/net/ethernet/sfc/ptp.c
54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static")
49e6123c65da ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and bluetooth.
No outstanding fires.
Current release - regressions:
- eth: atlantic: always deep reset on pm op, fix null-deref
Current release - new code bugs:
- rds: use maybe_get_net() when acquiring refcount on TCP sockets
[refinement of a previous fix]
- eth: ocelot: mark traps with a bool instead of guessing type based
on list membership
Previous releases - regressions:
- net: fix skipping features in for_each_netdev_feature()
- phy: micrel: fix null-derefs on suspend/resume and probe
- bcmgenet: check for Wake-on-LAN interrupt probe deferral
Previous releases - always broken:
- ipv4: drop dst in multicast routing path, prevent leaks
- ping: fix address binding wrt vrf
- net: fix wrong network header length when BPF protocol translation
is used on skbs with a fraglist
- bluetooth: fix the creation of hdev->name
- rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)"
* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
mlxsw: Avoid warning during ip6gre device removal
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
net: phy: micrel: Fix incorrect variable type in micrel
decnet: Use container_of() for struct dn_neigh casts
...
|
|
Add new ebpf helpers bpf_map_lookup_percpu_elem.
The implementation method is relatively simple, refer to the implementation
method of map_lookup_elem of percpu map, increase the parameters of cpu, and
obtain it according to the specified cpu.
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20220511093854.411-2-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
Second set of fixes for v5.18 and hopefully the last one. We have a
new iwlwifi maintainer, a fix to rfkill ioctl interface and important
fixes to both stack and two drivers.
* tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
nl80211: fix locking in nl80211_set_tx_bitrate_mask()
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
mac80211_hwsim: fix RCU protected chanctx access
mailmap: update Kalle Valo's email
mac80211: Reset MBSSID parameters upon connection
cfg80211: retrieve S1G operating channel number
nl80211: validate S1G channel width
mac80211: fix rx reordering with non explicit / psmp ack policy
ath11k: reduce the wait time of 11d scan and hw scan while add interface
MAINTAINERS: update iwlwifi driver maintainer
iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
====================
Link: https://lore.kernel.org/r/20220511154535.A1A12C340EE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
wire up support for async passthru that takes an array of buffers (using
iovec). Exposed via a new op NVME_URING_CMD_IO_VEC. Same 'struct
nvme_uring_cmd' is to be used with -
1. cmd.addr as base address of user iovec array
2. cmd.data_len as count of iovec array elements
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-6-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce handler for fops->uring_cmd(), implementing async passthru
on char device (/dev/ngX). The handler supports newly introduced
operation NVME_URING_CMD_IO. This operates on a new structure
nvme_uring_cmd, which is similar to struct nvme_passthru_cmd64 but
without the embedded 8b result field. This field is not needed since
uring-cmd allows to return additional result via big-CQE.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
file_operations->uring_cmd is a file private handler.
This is somewhat similar to ioctl but hopefully a lot more sane and
useful as it can be used to enable many io_uring capabilities for the
underlying operation.
IORING_OP_URING_CMD is a file private kind of request. io_uring doesn't
know what is in this command type, it's for the provider of ->uring_cmd()
to deal with.
Co-developed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This should allow external drivers to reference this bus ID
reservation and detect data coming from amd-sfh.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Pass a cookie along with BPF_LINK_CREATE requests.
Add a bpf_cookie field to struct bpf_tracing_link to attach a cookie.
The cookie of a bpf_tracing_link is available by calling
bpf_get_attach_cookie when running the BPF program of the attached
link.
The value of a cookie will be set at bpf_tramp_run_ctx by the
trampoline of the link.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-4-kuifeng@fb.com
|
|
Replace struct bpf_tramp_progs with struct bpf_tramp_links to collect
struct bpf_tramp_link(s) for a trampoline. struct bpf_tramp_link
extends bpf_link to act as a linked list node.
arch_prepare_bpf_trampoline() accepts a struct bpf_tramp_links to
collects all bpf_tramp_link(s) that a trampoline should call.
Change BPF trampoline and bpf_struct_ops to pass bpf_tramp_links
instead of bpf_tramp_progs.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510205923.3206889-2-kuifeng@fb.com
|
|
Pull virtio fix from Michael Tsirkin:
"A last minute fixup of the transitional ID numbers.
Important to get these right - if users start to depend on the wrong
ones they are very hard to fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: fix virtio transitional ids
|
|
Add tunnel source ip field in "struct bpf_tunnel_key". Add related code
to set and get tunnel source field.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-2-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just leave the SPDX marker and the copyright notice and remove the
irrelevant rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220419063303.583106-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit fixes the transitional PCI device ID.
Fixes: d61914ea6ada ("virtio: update virtio id table, add transitional ids")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220510102723.87666-1-mie@igel.co.jp
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Provide a userspace mechanism to pull precise error information upon
failed operations. Extending the current error codes returned by the
interfaces allows userspace to better determine the course of action.
This could be for instance, retrying a failed transaction at a later
point and thus offloading the error handling from the driver.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220429235644.697372-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds the big_cqe array to the struct io_uring_cqe to support large
CQE's.
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220426182134.136504-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Normal SQEs are 64-bytes in length, which is fine for all the commands
we support. However, in preparation for supporting passthrough IO,
provide an option for setting up a ring with 128-byte SQEs.
We continue to use the same type for io_uring_sqe, it's marked and
commented with a zero sized array pad at the end. This provides up
to 80 bytes of data for a passthrough command - 64 bytes for the
extra added data, and 16 bytes available at the end of the existing
SQE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-5.19/io_uring-socket:
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
|
|
* for-5.19/io_uring: (85 commits)
io_uring: don't clear req->kbuf when buffer selection is done
io_uring: eliminate the need to track provided buffer ID separately
io_uring: move provided buffer state closer to submit state
io_uring: move provided and fixed buffers into the same io_kiocb area
io_uring: abstract out provided buffer list selection
io_uring: never call io_buffer_select() for a buffer re-select
io_uring: get rid of hashed provided buffer groups
io_uring: always use req->buf_index for the provided buffer group
io_uring: ignore ->buf_index if REQ_F_BUFFER_SELECT isn't set
io_uring: kill io_rw_buffer_select() wrapper
io_uring: make io_buffer_select() return the user address directly
io_uring: kill io_recv_buffer_select() wrapper
io_uring: use 'sr' vs 'req->sr_msg' consistently
io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg
io_uring: check IOPOLL/ioprio support upfront
io_uring: replace smp_mb() with smp_mb__after_atomic() in io_sq_thread()
io_uring: add IORING_SETUP_TASKRUN_FLAG
io_uring: use TWA_SIGNAL_NO_IPI if IORING_SETUP_COOP_TASKRUN is used
io_uring: set task_work notify method at init time
io-wq: use __set_notify_signal() to wake workers
...
|
|
The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit
54f586a91532 ("rfkill: make new event layout opt-in") is unusable
since it is based on RFKILL_IOC_EXT_SIZE which has not been defined.
Fix that by replacing the undefined constant with the constant which
is intended to be used in this definition.
Fixes: 54f586a91532 ("rfkill: make new event layout opt-in")
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org
[add commit message provided later by Dmitry]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In preparation to a following commit, add clang-format on and
clang-format off stanzas around constant definitions. This enables to
keep aligned values, which is much more readable than packed
definitions.
Link: https://lore.kernel.org/r/20220506160513.523257-2-mic@digikod.net
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
TEE cleanup
Removes the old and unused TEE_IOCTL_SHM_* flags
Removes unused the unused tee_shm_va2pa() and tee_shm_pa2va() functions
* tag 'tee-cleanup-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: remove flags TEE_IOCTL_SHM_MAPPED and TEE_IOCTL_SHM_DMA_BUF
tee: remove tee_shm_va2pa() and tee_shm_pa2va()
Link: https://lore.kernel.org/r/20220506070328.GA1344495@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If IORING_RECVSEND_POLL_FIRST is set for recv/recvmsg or send/sendmsg,
then we arm poll first rather than attempt a receive or send upfront.
This can be useful if we expect there to be no data (or space) available
for the request, as we can then avoid wasting time on the initial
issue attempt.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing
changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3.
The discussion is still ongoing so let's remove the uAPI
until the discussion settles.
Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/testing/selftests/net/forwarding/Makefile
f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile")
50fe062c806e ("selftests: forwarding: new test, verify host mdb entries")
https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow userspace to disable EHT mode during association.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20220323224636.20211-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This allows userspace to tell kernel to add a new subflow to an existing
mptcp connection.
Userspace provides the token to identify the mptcp-level connection
that needs a change in active subflows and the local and remote
addresses of the new or the to-be-removed subflow.
MPTCP_PM_CMD_SUBFLOW_CREATE requires the following parameters:
{ token, { loc_id, family, loc_addr4 | loc_addr6 }, { family, rem_addr4 |
rem_addr6, rem_port }
MPTCP_PM_CMD_SUBFLOW_DESTROY requires the following parameters:
{ token, { family, loc_addr4 | loc_addr6, loc_port }, { family, rem_addr4 |
rem_addr6, rem_port }
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a MPTCP netlink command for issuing a
REMOVE_ADDR signal for an address over the chosen MPTCP
connection from a userspace path manager.
The command requires the following parameters: {token, loc_id}.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a MPTCP netlink interface for issuing
ADD_ADDR advertisements over the chosen MPTCP connection from a
userspace path manager.
The command requires the following parameters:
{ token, { loc_id, family, daddr4 | daddr6 [, dport] } [, if_idx],
flags[signal] }.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds new clock type for the GPIO controller which can
timestamp gpio lines in using hardware means. To expose such
functionalities to the userspace, code has been added where
during line create or set config API calls, it checks for new
clock type and if requested, calls HTE API. During line change
event, the HTE subsystem pushes timestamp data to userspace
through gpiolib-cdev.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Merge arm64's SME branch to resolve conflicts with the WFxT branch.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows
software to request that a system be placed in the deepest possible
low-power state. Effectively, software can use this to suspend itself to
RAM.
Unfortunately, there really is no good way to implement a system-wide
PSCI call in KVM. Any precondition checks done in the kernel will need
to be repeated by userspace since there is no good way to protect a
critical section that spans an exit to userspace. SYSTEM_RESET and
SYSTEM_OFF are equally plagued by this issue, although no users have
seemingly cared for the relatively long time these calls have been
supported.
The solution is to just make the whole implementation userspace's
problem. Introduce a new system event, KVM_SYSTEM_EVENT_SUSPEND, that
indicates to userspace a calling vCPU has invoked PSCI SYSTEM_SUSPEND.
Additionally, add a CAP to get buy-in from userspace for this new exit
type.
Only advertise the SYSTEM_SUSPEND PSCI call if userspace has opted in.
If a vCPU calls SYSTEM_SUSPEND, punt straight to userspace. Provide
explicit documentation of userspace's responsibilites for the exit and
point to the PSCI specification to describe the actual PSCI call.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-8-oupton@google.com
|
|
Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU
is in a suspended state. In the suspended state the vCPU will block
until a wakeup event (pending interrupt) is recognized.
Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to
userspace that KVM has recognized one such wakeup event. It is the
responsibility of userspace to then make the vCPU runnable, or leave it
suspended until the next wakeup event.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-7-oupton@google.com
|