| Age | Commit message (Collapse) | Author |
|---|
|
Replace the 'previous cookie' field in struct nfs_entry with the
array->last_cookie.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Avoid clearing the entire readdir page cache if we're just doing forced
readdirplus for the 'ls -l' heuristic.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Instead of using a linear index to address the pages, use the cookie of
the first entry, since that is what we use to match the page anyway.
This allows us to avoid re-reading the entire cache on a seekdir() type
of operation. The latter is very common when re-exporting NFS, and is a
major performance drain.
The change does affect our duplicate cookie detection, since we can no
longer rely on the page index as a linear offset for detecting whether
we looped backwards. However since we no longer do a linear search
through all the pages on each call to nfs_readdir(), this is less of a
concern than it was previously.
The other downside is that invalidate_mapping_pages() no longer can use
the page index to avoid clearing pages that have been read. A subsequent
patch will restore the functionality this provides to the 'ls -l'
heuristic.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The heuristic for readdirplus is designed to try to detect 'ls -l' and
similar patterns. It does so by looking for cache hit/miss patterns in
both the attribute cache and in the dcache of the files in a given
directory, and then sets a flag for the readdirplus code to interpret.
The problem with this approach is that a single attribute or dcache miss
can cause the NFS code to force a refresh of the attributes for the
entire set of files contained in the directory.
To be able to make a more nuanced decision, let's sample the number of
hits and misses in the set of open directory descriptors. That allows us
to set thresholds at which we start preferring READDIRPLUS over regular
READDIR, or at which we start to force a re-read of the remaining
readdir cache using READDIRPLUS.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The current NFS readdir code will always try to maximise the amount of
readahead it performs on the assumption that we can cache anything that
isn't immediately read by the process.
There are several cases where this assumption breaks down, including
when the 'ls -l' heuristic kicks in to try to force use of readdirplus
as a batch replacement for lookup/getattr.
This patch therefore tries to tone down the amount of readahead we
perform, and adjust it to try to match the amount of data being
requested by user space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the page cache entry that was last read gets invalidated for some
reason, then make sure we can re-create it on the next call to readdir.
This, combined with the cache page validation, allows us to reuse the
cached value of page-index on successive calls to nfs_readdir.
Credit is due to Benjamin Coddington for showing that the concept works,
and that it allows for improved cache sharing between processes even in
the case where pages are lost due to LRU or active invalidation.
Suggested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
We've been using a default firmware name for each PCI/ACPI/OF platform
for a while. The machine-specific sof_fw_filename is in practice not
different from the default, and newer devices don't set this field, so
let's remove the redundant definitions.
When OEMs modify the base firmware, they can keep the same firmware
name but store the file in a separate directory.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220301194903.60859-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
Link: https://lore.kernel.org/r/20220228113652.970857-2-adrian.hunter@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the workqueue code was created it didn't allow variable args so we
have been using a temp buffer. Drop that.
Link: https://lore.kernel.org/r/20220226230435.38733-7-michael.christie@oracle.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We currently allocate a workqueue per host and only use it for removing the
target. For the session per host case we could be using this workqueue to
be able to do recoveries (block, unblock, timeout handling) in parallel. To
also allow offload drivers to do their session recoveries in parallel, this
drops the per host workqueue and replaces it with a per session one.
Link: https://lore.kernel.org/r/20220226230435.38733-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
qla4xxx does not use iscsi_scan_finished() anymore so remove it.
Link: https://lore.kernel.org/r/20220226230435.38733-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This header is empty now except for an include of <linux/blk-mq.h>, so
remove it.
Link: https://lore.kernel.org/r/20220224175552.988286-9-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.
Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_cmnd
Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.
Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage. Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs. On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.
Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add the Ethertype for EtherCAT protocol.
Signed-off-by: Daniel Braunwarth <daniel@braunwarth.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Ethertype for PROFINET protocol.
Signed-off-by: Daniel Braunwarth <daniel@braunwarth.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PT_GNU_* program header types are actually offsets from PT_LOOS,
so redefine them as such, reorder them, and add the missing PT_GNU_RELRO.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
struct linux_binfmt::core_dump and struct min_coredump::min_coredump
are used under CONFIG_COREDUMP only. Shrink those embedded configs
a bit.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/YglbIFyN+OtwVyjW@localhost.localdomain
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
intentional. From Eric Dumazet.
2) Use-after-free in netfilter hook core, from Eric Dumazet.
3) Missing rcu read lock side for netfilter egress hook,
from Florian Westphal.
4) nf_queue assume state->sk is full socket while it might not be.
Invoke sock_gen_put(), from Florian Westphal.
5) Add selftest to exercise the reported KASAN splat in 4)
6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
Also from Florian.
7) Use input interface index only for hardware offload, not for
the software plane. This breaks tc ct action. Patch from Paul Blakey.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
netfilter: nf_queue: handle socket prefetch
netfilter: nf_queue: fix possible use-after-free
selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
netfilter: nf_queue: don't assume sk is full socket
netfilter: egress: silence egress hook lockdep splats
netfilter: fix use-after-free in __nf_register_net_hook()
netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================
Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.
To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.
Fixes: 9795ded7f924 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Properties are not and should not be changed in the callee, hence constify
properties parameter in acpi_create_platform_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.18
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
soc: qcom: rpmpd: Add MSM8226 support
dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
soc: qcom: mdt_loader: Fix split-firmware condition
dt-bindings: arm: msm: Add LLCC compatible for SM8450
dt-bindings: arm: msm: Add LLCC compatible for SM8350
soc: qcom: llcc: Add configuration data for SM8450 SoC
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add support for 16 ways of allocation
soc: qcom: socinfo: Add some more PMICs and SoCs
firmware: qcom: scm: Add support for MC boot address API
firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
cpuidle: qcom-spm: Check if any CPU is managed by SPM
remoteproc: qcom: pas: Add SM8450 remoteproc support
dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
remoteproc: qcom: pas: Carry PAS metadata context
soc: qcom: mdt_loader: Extract PAS operations
...
Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The global snaprealm would be created and then destroyed immediately
every time when updating it.
URL: https://tracker.ceph.com/issues/54362
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Ceph have removed this macro and the 0x3 will be use for global dummy
snaprealm.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
There could be huge number of capsnaps around at any given time. On
x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes
by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each.
[ jlayton: use kmem_cache_zalloc ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Problem:
Some directory vxattrs (e.g. ceph.dir.pin.random) are governed by
information that isn't necessarily shared with the client. Add support
for the new GETVXATTR operation, which allows the client to query the
MDS directly for vxattrs.
When the client is queried for a vxattr that doesn't have a special
handler, have it issue a GETVXATTR to the MDS directly.
Solution:
Adds new getvxattr op to fetch ceph.dir.pin*, ceph.dir.layout* and
ceph.file.layout* vxattrs.
If the entire layout for a dir or a file is being set, then it is
expected that the layout be set in standard JSON format. Individual
field value retrieval is not wrapped in JSON. The JSON format also
applies while setting the vxattr if the entire layout is being set in
one go.
As a temporary measure, setting a vxattr can also be done in the old
format. The old format will be deprecated in the future.
URL: https://tracker.ceph.com/issues/51062
Signed-off-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
|
|
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.
The actual state is saved in p->saved_state, but reading it after reading
p->__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING
As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220120162520.570782-3-valentin.schneider@arm.com
|
|
As of commit
c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
the following sequence becomes possible:
p->__state = TASK_INTERRUPTIBLE;
__schedule()
deactivate_task(p);
ttwu()
READ !p->on_rq
p->__state=TASK_WAKING
trace_sched_switch()
__trace_sched_switch_state()
task_state_index()
return 0;
TASK_WAKING isn't in TASK_REPORT, so the task appears as TASK_RUNNING in
the trace event.
Prevent this by pushing the value read from __schedule() down the trace
event.
Reported-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220120162520.570782-2-valentin.schneider@arm.com
|
|
The cpuacct_account_field() and it's cgroup v2 wrapper
cgroup_account_cputime_field() is only called from cputime
in task_group_account_field(), which is already in RCU read-side
critical section. So remove these redundant RCU read lock.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220051426.5274-3-zhouchengming@bytedance.com
|
|
Since cpuacct_charge() is called from the scheduler update_curr(),
we must already have rq lock held, then the RCU read lock can
be optimized away.
And do the same thing in it's wrapper cgroup_account_cputime(),
but we can't use lockdep_assert_rq_held() there, which defined
in kernel/sched/sched.h.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220051426.5274-2-zhouchengming@bytedance.com
|
|
Multitouch devices in hybrid mode are reporting multiple times the
same collection. We should accommodate for this in our handling
of priorities by defining the slots they belong to.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
HID_QUIRK_INVERT is kind of complex to deal with and was bogus.
Furthermore, it didn't make sense to use a global per struct hid_device
quirk for something dynamic as the current state.
Store the current tool information in the report itself, and re-order
the processing of the fields to enforce having all the tablet "state"
fields before getting to In Range and other input fields.
This way, we now have all the information whether a tool is present
or not while processing In Range.
This new behavior enforces that only one tool gets forwarded to userspace
at the same time, and that if either eraser or invert is set, we enforce
BTN_TOOL_RUBBER.
Note that the release of the previous tool now happens in its own EV_SYN
report so userspace doesn't get confused by having 2 tools.
These changes are tested in the following hid-tools regression tests:
https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/127
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When a device exposes both Invert and InRange, Invert must be processed
before InRange. If we keep the order of the device and we process them
out of order, InRange will first set BTN_TOOL_PEN, and then Invert will
set BTN_TOOL_RUBBER. Userspace knows how to deal with that situation,
but fixing it in the kernel is now easier.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This will be used in a later commit:
we build a list of input fields (and usage_index) that is ordered based
on a usage priority.
Changing the usage priority allows to re-order the processed list, meaning
that we can enforce some usages to be process before others.
For instance, before processing InRange in the HID tablets, we need to
know if we are using the eraser (side or button). Enforcing a higher
(lower number) priority for Invert allows to force the input stack to
process that field before.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This is a preparatory patch for being able to process the usages
out of order. We split the retrieval of the data in a separate function
and also split out the processing of the usages depending if the field
is an array or a variable.
No functional changes from this patch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This is a preparation patch for rethinking the generic processing
of HID reports.
We can actually pre-allocate all of our memory instead of dynamically
allocating/freeing it whenever we parse a report.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
johannes Berg says:
====================
Some last-minute fixes:
* rfkill
- add missing rfill_soft_blocked() when disabled
* cfg80211
- handle a nla_memdup() failure correctly
- fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in
Makefile
* mac80211
- fix EAPOL handling in 802.3 RX path
- reject setting up aggregation sessions before
connection is authorized to avoid timeouts or
similar
- handle some SAE authentication steps correctly
- fix AC selection in mesh forwarding
* iwlwifi
- remove TWT support as it causes firmware crashes
when the AP isn't behaving correctly
- check debugfs pointer before dereferncing it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add stub functions for the bulk API to allow compile testing.
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301090735.26599-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This add a new sysctl: net.smc.autocorking_size
We can dynamically change the behaviour of autocorking
by change the value of autocorking_size.
Setting to 0 disables autocorking in SMC
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add sysctl interface to support container environment
for SMC as we talk in the mail list.
Link: https://lore.kernel.org/netdev/20220224020253.GF5443@linux.alibaba.com
Co-developed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the now unused KVM_REQ_MMU_RELOAD, shift KVM_REQ_VM_DEAD into the
unoccupied space, and update vcpu-requests.rst, which was missing an
entry for KVM_REQ_VM_DEAD. Switching KVM_REQ_VM_DEAD to entry '1' also
fixes the stale comment about bits 4-7 being reserved.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
- add power domains support for mt8195
- disable ACP on mt8192
mt8186:
- add support for power domains
- add mmsys and mutex support needed for DRM
- add reset control based on mmsys subsystem
- add pmic wrapper
* tag 'v5.17-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
soc: mediatek: pm-domains: Move power status offset to power domain data
soc: mediatek: pm-domains: Remove unused macro
soc: mediatek: pm-domains: Add wakeup capacity support in power domain
dt-bindings: power: Add MT8195 power domains
Link: https://lore.kernel.org/r/16a53482-5a8c-e95e-8cd4-b8304f110987@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If CONFIG_RFKILL is not set, the Intel WiFi driver will not build
the iw_mvm driver part due to the missing rfill_soft_blocked()
call. Adding a inline declaration of rfill_soft_blocked() if
CONFIG_RFKILL=n fixes the following error:
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state':
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration]
2215 | mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false;
| ^~~~~~~~~~~~~~~~~~~
| rfkill_blocked
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: Neill Whillans <neill.whillans@codethink.co.uk>
Fixes: 5bc9a9dd7535 ("rfkill: allow to get the software rfkill state")
Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.uk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for VXLAN vni filter entries' stats dumping
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
