summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-04-08rtc: OMAP: Add support for rtc-only modeKeerthy
Prepare rtc driver for rtc-only with DDR in self-refresh mode. omap_rtc_power_off now should cater to two features: 1) RTC plus DDR in self-refresh is power a saving mode where in the entire system including the different voltage rails from PMIC are shutdown except the ones feeding on to RTC and DDR. DDR is kept in self-refresh hence the contents are preserved. RTC ALARM2 is connected to PMIC_EN line once we the ALARM2 is triggered we enter the mode with DDR in self-refresh and RTC Ticking. After a predetermined time an RTC ALARM1 triggers waking up the system[1]. The control goes to bootloader. The bootloader then checks RTC scratchpad registers to confirm it was an rtc_only wakeup and follows a different path, configure bare minimal clocks for ddr and then jumps to the resume address in another RTC scratchpad registers and transfers the control to Kernel. Kernel then restores the saved context. omap_rtc_power_off_program does the ALARM2 programming part. [1] http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf Page 2884 2) Power-off: This is usual poweroff mode. omap_rtc_power_off calls the above omap_rtc_power_off_program function and in addition to that programs the OMAP_RTC_PMIC_REG for any external wake ups for PMIC like the pushbutton and shuts off the PMIC. Hence the split in omap_rtc_power_off. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [tony@atomide.com: folded in a fix for compile warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am33xx: Added AM33XX_PADCONF macroChristina Quast
AM33XX_PADCONF takes three instead of two parameters, to make future changes to #pinctrl-cells easier. For old boards which are not mainlined, we left the AM33XX_IOPAD macro. Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08ARM: dts: am33xx: Added macros for numeric pinmux addressesChristina Quast
The values are extraced from the "AM335x SitaraTM Processors Technical Reference Manual", Section 9.3.1 CONTROL_MODULE Registers, based on the file autogenerated by TI PinMux. Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08datagram: remove rendundant 'peeked' argumentPaolo Abeni
After commit a297569fe00a ("net/udp: do not touch skb->peeked unless really needed") the 'peeked' argument of __skb_try_recv_datagram() and friends is always equal to !!'flags & MSG_PEEK'. Since such argument is really a boolean info, and the callers have already 'flags & MSG_PEEK' handy, we can remove it and clean-up the code a bit. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08RDMA: Handle SRQ allocations by IB/coreLeon Romanovsky
Convert SRQ allocation from drivers to be in the IB/core Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA: Handle AH allocations by IB/coreLeon Romanovsky
Simplify drivers by ensuring lifetime of ib_ah object. The changes in .create_ah() go hand in hand with relevant update in .destroy_ah(). We will use this opportunity and convert .destroy_ah() to don't fail, as it was suggested a long time ago, because there is nothing to do in case of failure during destroy. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/core: Support object allocation in atomic contextLeon Romanovsky
AH objects are allocated in atomic context and those allocations should be done with GFP_ATOMIC. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08IB: When attrs.udata/ufile is available use that instead of uobjectJason Gunthorpe
The ucontext and ufile should not be accessed via the uobject, all these cases have an attrs so use that instead. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/nldev: Return device protocolLeon Romanovsky
Add new RDMA_NLDEV_ATTR_DEV_PROTOCOL attribute to give ability for UDEV rules create IB device stable names based on link type protocol. The assumption that devices like mlx4 with duality in their link type under one IB device struct won't be allowed in the future. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEsShiraz Saleem
Combine contiguous regions of PAGE_SIZE pages into single scatter list entry while building the scatter table for a umem. This minimizes the number of the entries in the scatter list and reduces the DMA mapping overhead, particularly with the IOMMU. Set default max_seg_size in core for IB devices to 2G and do not combine if we exceed this limit. Also, purge npages in struct ib_umem as we now DMA map the umem SGL with sg_nents and npage computation is not needed. Drivers should now be using ib_umem_num_pages(), so fix the last stragglers. Move npages tracking to ib_umem_odp as ODP drivers still need it. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Gal Pressman <galpress@amazon.com> Tested-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08dma-mapping: remove leftover NULL device supportChristoph Hellwig
Most dma_map_ops implementations already had some issues with a NULL device, or did simply crash if one was fed to them. Now that we have cleaned up all the obvious offenders we can stop to pretend we support this mode. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-08block: don't use for-inside-for in bio_for_each_segment_allMing Lei
Commit 6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") changes bio_for_each_segment_all() to use for-inside-for. This way breaks all bio_for_each_segment_all() call with error out branch via 'break', since now 'break' can only break from the inner loop. Fixes this issue by implementing bio_for_each_segment_all() via single 'for' loop, and now the logic is very similar with normal bvec iterator. Cc: Qu Wenruo <quwenruo.btrfs@gmx.com> Cc: linux-btrfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: Omar Sandoval <osandov@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-and-Tested-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Fixes: 6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08rcu: validate arguments for rcu tracepointsYafang Shao
When CONFIG_RCU_TRACE is not set, all these tracepoints are defined as do-nothing macro. We'd better make those inline functions that take proper arguments. As RCU_TRACE() is defined as do-nothing marco as well when CONFIG_RCU_TRACE is not set, so we can clean it up. Link: http://lkml.kernel.org/r/1553602391-11926-4-git-send-email-laoar.shao@gmail.com Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is ↵Yafang Shao
not set The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should be not exposed to user if CONFIG_SCHEDSTATS is not set. Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08tracing: introduce TRACE_EVENT_NOP()Yafang Shao
Sometimes we want to define a tracepoint as a do-nothing function. So I introduce TRACE_EVENT_NOP, DECLARE_EVENT_CLASS_NOP and DEFINE_EVENT_NOP for this kind of usage. Link: http://lkml.kernel.org/r/1553602391-11926-2-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08tracing: stop making gpio tracing configurableUwe Kleine-König
gpio tracing was made configurable in 4.4-rc1 (commit ddd70280bf0e ("tracing: gpio: Add Kconfig option for enabling/disabling trace events")). Since then it is the only event type that can be compiled conditionally. Given that there is only little overhead I don't understand the reasoning and I was annoyed more than once that gpio events were not available without recompiling. So drop the Kconfig symbol and make gpio events available unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-08cfg80211/nl80211: Offload OWE processing to user space in AP modeSunil Dutt
This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRICNarayanraddi Masti
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scanvamsi krishna
This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: vamsi krishna <vamsin@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rebase on refactoring, add policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08mac80211: make ieee80211_schedule_txq schedule empty TXQsFelix Fietkau
Currently there is no way for the driver to signal to mac80211 that it should schedule a TXQ even if there are no packets on the mac80211 part of that queue. This is problematic if the driver has an internal retry queue to deal with software A-MPDU retry. This patch changes the behavior of ieee80211_schedule_txq to always schedule the queue, as its only user (ath9k) seems to expect such behavior already: it calls this function on tx status and on powersave wakeup whenever its internal retry queue is not empty. Also add an extra argument to ieee80211_return_txq to get the same behavior. This fixes an issue on ath9k where tx queues with packets to retry (and no new packets in mac80211) would not get serviced. Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08cfg80211: add ratelimited variants of err and warnStanislaw Gruszka
wiphy_{err,warn}_ratelimited will be used by rt2x00 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-08arch: Remove dummy mmiowb() definitions from arch codeWill Deacon
Now that no driver code is using mmiowb() directly, remove the dummy definitions remaining in architectures that don't make use of asm-generic/io.h, as well as the definition in asm-generic/io.h itself. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08Merge tag 'v5.1-rc3' into develLinus Walleij
Linux 5.1-rc3
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessorsWill Deacon
Removing explicit calls to mmiowb() from driver code means that we must now call into the generic mmiowb_spin_{lock,unlock}() functions from the core spinlock code. In order to elide barriers following critical sections without any I/O writes, we also hook into the asm-generic I/O routines. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08asm-generic/mmiowb: Add generic implementation of mmiowb() trackingWill Deacon
In preparation for removing all explicit mmiowb() calls from driver code, implement a tracking system in asm-generic based loosely on the PowerPC implementation. This allows architectures with a non-empty mmiowb() definition to have the barrier automatically inserted in spin_unlock() following a critical section containing an I/O write. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08cpufreq: intel_pstate: Update max frequency on global turbo changesRafael J. Wysocki
While the cpuinfo.max_freq value doesn't really matter for intel_pstate in the active mode, in the passive mode it is used by governors as the maximum physical frequency of the CPU and the results of governor computations generally depend on it. Also it is made available to user space via sysfs and it should match the current HW configuration. For this reason, make intel_pstate update cpuinfo.max_freq for all CPUs if it detects a global change of turbo frequency settings from "disable" to "enable" or the other way associated with a _PPC change notification from the platform firmware. Note that policy_is_inactive(), cpufreq_cpu_acquire(), cpufreq_cpu_release(), and cpufreq_set_policy() need to be made available to it for this purpose. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200759 Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-04-08gpio: mmio: Drop bgpio_dir_invertedLinus Walleij
The direction inversion semantics are now handled by simply using the registers for in/out available, no need to keep track of inversion semantics exmplicitly anymore. Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Jan Kotas <jank@cadence.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-08Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
We haven't backmerged for a while and this creates some coherency issues across DRM drivers. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-08mtd: nand: omap: Fix comment in platform data using wrong Kconfig symbolMiquel Raynal
The symbol that is being used in the #if/#endif block is not the one which is mentioned at the bottom. Fixes: 93af53b8633c ("nand: omap2: Remove horrible ifdefs to fix module probe") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->ecc_{strength,step}_dsBoris Brezillon
nand_device embeds a nand_ecc_req object which contains the minimum strength and step-size required by the NAND device. Drop the chip->ecc_{strength,step}_ds fields and use chip->base.eccreq.{strength,step_size} instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->numchipsBoris Brezillon
The same information is provided by nanddev_ntargets(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->chipsizeBoris Brezillon
The target size can now be returned by nanddev_get_targetsize(). Get rid of the chip->chipsize field and use this helper instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->bits_per_cellBoris Brezillon
Now that we inherit from nand_device, we can use nand_device->memorg.bits_per_cell instead of having our own field at the nand_chip level. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nanddev_mtd_max_bad_blocks()Boris Brezillon
nanddev_mtd_max_bad_blocks() is implemented by the generic NAND layer and is already doing what we need. Reuse this function instead of having our own implementation. While at it, get rid of the ->max_bb_per_die and ->blocks_per_die fields which are now unused. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Move all page cache related fields to a sub-structBoris Brezillon
Looking at the field names it's hard to tell what ->data_buf, ->pagebuf and ->pagebuf_bitflips are for. Clarify that by moving those fields in a sub-struct named pagecache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Provide a helper to get chip->data_bufBoris Brezillon
We plan to move cache related fields to a pagecache struct in nand_chip but some drivers access ->pagebuf directly to invalidate the cache before they start using ->data_buf. Let's provide an helper that returns a pointer to ->data_buf after invalidating the cache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Prepare things to reuse the generic NAND layerBoris Brezillon
The generic NAND layer provides abstraction of NAND devices no matter the bus that is used to communicate with the chip. Basing the raw NAND core on this generic layer should avoid duplication of common operations, like iterating over all pages/blocks for MTD IO/erase operations. In order to re-use this layer, we must first inherit from nand_device and then initialize the nand_device struct appropriately. This patch is taking care of the former. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nand_to_mtd() in nand_{set,get}_flash_node()Boris Brezillon
Use the nand_to_mtd() helper to access chip->mtd as done everywhere else. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: nand: Add a helper to retrieve the number of pages per targetBoris Brezillon
Will be used by the raw NAND framework. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: nand: Add a helper returning the number of eraseblocks per targetBoris Brezillon
Some drivers in the raw NAND framework seems to need this helper, so let's just add it instead of open-coding the logic. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: nand: Add max_bad_eraseblocks_per_lun info to memorgBoris Brezillon
NAND datasheets usually give the maximum number of bad blocks per LUN and this number can be used to help upper layers decide how much blocks they should reserve for bad block handling. Add a max_bad_eraseblocks_per_lun to the nand_memory_organization struct and update the NAND_MEMORG() macro (and its users) accordingly. We also provide a default mtd->_max_bad_blocks() implementation. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08dt-bindings: clk: axg-audio: add g12a supportJerome Brunet
Add a new compatible string and additional clock ids for audio clock controller of the g12a SoC family. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-2-jbrunet@baylibre.com
2019-04-08ASoC: core: conditionally increase module refcount on component openRanjani Sridharan
Recently, for Intel platforms the "ignore_module_refcount" field was introduced for the component driver. In order to avoid a deadlock preventing the PCI modules from being removed even when the card was idle, the refcounts were not incremented for the device driver module during component probe. However, this change introduced a nasty side effect: the device driver module can be unloaded while a pcm stream is open. This patch proposes to change the field to be renamed as "module_get_upon_open". When this field is set, the module refcount should be incremented on pcm open amd decremented upon pcm close. This will enable modules to be removed when no PCM playback/capture happens and prevent removal when the component is actually in use. Also, align with the skylake component driver with the new name. Fixes: b450b878('ASoC: core: don't increase component module refcount unconditionally' Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08xfrm: store xfrm_mode directly, not its addressFlorian Westphal
This structure is now only 4 bytes, so its more efficient to cache a copy rather than its address. No significant size difference in allmodconfig vmlinux. With non-modular kernel that has all XFRM options enabled, this series reduces vmlinux image size by ~11kb. All xfrm_mode indirections are gone and all modes are built-in. before (ipsec-next master): text data bss dec filename 21071494 7233140 11104324 39408958 vmlinux.master after this series: 21066448 7226772 11104324 39397544 vmlinux.patched With allmodconfig kernel, the size increase is only 362 bytes, even all the xfrm config options removed in this series are modular. before: text data bss dec filename 15731286 6936912 4046908 26715106 vmlinux.master after this series: 15731492 6937068 4046908 26715468 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove afinfo pointer from xfrm_modeFlorian Westphal
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from ipv6 in case of CONFIG_IPV6=m. This change has virtually no effect on vmlinux size, but it reduces afinfo size and allows followup patch to make xfrm modes const. v2: mark if (afinfo) tests as likely (Sabrina) re-fetch afinfo according to inner_mode in xfrm_prepare_input(). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove output2 indirection from xfrm_modeFlorian Westphal
similar to previous patch: no external module dependencies, so we can avoid the indirection by placing this in the core. This change removes the last indirection from xfrm_mode and the xfrm4|6_mode_{beet,tunnel}.c modules contain (almost) no code anymore. Before: text data bss dec hex filename 3957 136 0 4093 ffd net/xfrm/xfrm_output.o 587 44 0 631 277 net/ipv4/xfrm4_mode_beet.o 649 32 0 681 2a9 net/ipv4/xfrm4_mode_tunnel.o 625 44 0 669 29d net/ipv6/xfrm6_mode_beet.o 599 32 0 631 277 net/ipv6/xfrm6_mode_tunnel.o After: text data bss dec hex filename 5359 184 0 5543 15a7 net/xfrm/xfrm_output.o 171 24 0 195 c3 net/ipv4/xfrm4_mode_beet.o 171 24 0 195 c3 net/ipv4/xfrm4_mode_tunnel.o 172 24 0 196 c4 net/ipv6/xfrm6_mode_beet.o 172 24 0 196 c4 net/ipv6/xfrm6_mode_tunnel.o v2: fold the *encap_add functions into xfrm*_prepare_output preserve (move) output2 comment (Sabrina) use x->outer_mode->encap, not inner fix a build breakage on ppc (kbuild robot) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input2 indirection from xfrm_modeFlorian Westphal
No external dependencies on any module, place this in the core. Increase is about 1800 byte for xfrm_input.o. The beet helpers get added to internal header, as they can be reused from xfrm_output.c in the next patch (kernel contains several copies of them in the xfrm{4,6}_mode_beet.c files). Before: text data bss dec filename 5578 176 2364 8118 net/xfrm/xfrm_input.o 1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o 171 40 0 211 net/ipv4/xfrm4_mode_transport.o 1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o 1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o 172 40 0 212 net/ipv6/xfrm6_mode_ro.o 172 40 0 212 net/ipv6/xfrm6_mode_transport.o 1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o After: text data bss dec filename 7373 200 2364 9937 net/xfrm/xfrm_input.o 587 44 0 631 net/ipv4/xfrm4_mode_beet.o 171 32 0 203 net/ipv4/xfrm4_mode_transport.o 649 32 0 681 net/ipv4/xfrm4_mode_tunnel.o 625 44 0 669 net/ipv6/xfrm6_mode_beet.o 172 32 0 204 net/ipv6/xfrm6_mode_ro.o 172 32 0 204 net/ipv6/xfrm6_mode_transport.o 599 32 0 631 net/ipv6/xfrm6_mode_tunnel.o v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix AF_UNSPEC selector breakage (bisected by Benedict Wong) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove gso_segment indirection from xfrm_modeFlorian Westphal
These functions are small and we only have versions for tunnel and transport mode for ipv4 and ipv6 respectively. Just place the 'transport or tunnel' conditional in the protocol specific function instead of using an indirection. Before: 3226 12 0 3238 net/ipv4/esp4_offload.o 7004 492 0 7496 net/ipv4/ip_vti.o 3339 12 0 3351 net/ipv6/esp6_offload.o 11294 460 0 11754 net/ipv6/ip6_vti.o 1180 72 0 1252 net/ipv4/xfrm4_mode_beet.o 428 48 0 476 net/ipv4/xfrm4_mode_transport.o 1271 48 0 1319 net/ipv4/xfrm4_mode_tunnel.o 1083 60 0 1143 net/ipv6/xfrm6_mode_beet.o 172 48 0 220 net/ipv6/xfrm6_mode_ro.o 429 48 0 477 net/ipv6/xfrm6_mode_transport.o 1164 48 0 1212 net/ipv6/xfrm6_mode_tunnel.o 15730428 6937008 4046908 26714344 vmlinux After: 3461 12 0 3473 net/ipv4/esp4_offload.o 7000 492 0 7492 net/ipv4/ip_vti.o 3574 12 0 3586 net/ipv6/esp6_offload.o 11295 460 0 11755 net/ipv6/ip6_vti.o 1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o 171 40 0 211 net/ipv4/xfrm4_mode_transport.o 1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o 1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o 172 40 0 212 net/ipv6/xfrm6_mode_ro.o 172 40 0 212 net/ipv6/xfrm6_mode_transport.o 1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o 15730424 6937008 4046908 26714340 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
generated by cgit (git 2.34.1) at 2025-09-15 19:49:25 +0000