| Age | Commit message (Collapse) | Author |
|---|
|
Add device tree bindings for the global clock controller on Qualcomm
SM8750 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-5-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drivers will need to register dmem regions at probe time, so let's
give them a drm-managed helper.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-3-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This code is based on the RDMA and misc cgroup initially, but now
uses page_counter. It uses the same min/low/max semantics as the memory
cgroup as a result.
There's a small mismatch as TTM uses u64, and page_counter long pages.
In practice it's not a problem. 32-bits systems don't really come with
>=4GB cards and as long as we're consistently wrong with units, it's
fine. The device page size may not be in the same units as kernel page
size, and each region might also have a different page size (VRAM vs GART
for example).
The interface is simple:
- Call dmem_cgroup_register_region()
- Use dmem_cgroup_try_charge to check if you can allocate a chunk of memory,
use dmem_cgroup__uncharge when freeing it. This may return an error code,
or -EAGAIN when the cgroup limit is reached. In that case a reference
to the limiting pool is returned.
- The limiting cs can be used as compare function for
dmem_cgroup_state_evict_valuable.
- After having evicted enough, drop reference to limiting cs with
dmem_cgroup_pool_state_put.
This API allows you to limit device resources with cgroups.
You can see the supported cards in /sys/fs/cgroup/dmem.capacity
You need to echo +dmem to cgroup.subtree_control, and then you can
partition device memory.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204143112.1250983-1-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Use a plain BLK_MQ_F_* flag to select the round robin tag selection
instead of overlaying an enum with just two possible values into the
flags space.
Doing so allows adding a BLK_MQ_F_MAX sentinel for simplified overflow
checking in the messy debugfs helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250106083531.799976-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only queues that really can't support a scheduler are those that
do not have a gendisk associated with them, and thus can't be used for
non-passthrough commands. In addition to those null_blk can optionally
set the flag, which is a bad odd. Replace the null_blk usage with
BLK_MQ_F_NO_SCHED_BY_DEFAULT to keep the expected semantics and then
remove BLK_MQ_F_NO_SCHED as the non-disk queues never call into
elevator_init_mq or blk_register_queue which adds the sysfs attributes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250106083531.799976-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a prepare patch to add cache_check_rcu, will use it with follow
patch.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the connection limit only apply to unconfirmed connections,
there is no need to configure it. So remove all the configuration and
fix the number of unconfirmed connections as always 64 - which is
now given a name: XPT_MAX_TMP_CONN
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The heuristic for limiting the number of incoming connections to nfsd
currently uses sv_nrthreads - allowing more connections if more threads
were configured.
A future patch will allow number of threads to grow dynamically so that
there will be no need to configure sv_nrthreads. So we need a different
solution for limiting connections.
It isn't clear what problem is solved by limiting connections (as
mentioned in a code comment) but the most likely problem is a connection
storm - many connections that are not doing productive work. These will
be closed after about 6 minutes already but it might help to slow down a
storm.
This patch adds a per-connection flag XPT_PEER_VALID which indicates
that the peer has presented a filehandle for which it has some sort of
access. i.e the peer is known to be trusted in some way. We now only
count connections which have NOT been determined to be valid. There
should be relative few of these at any given time.
If the number of non-validated peer exceed a limit - currently 64 - we
close the oldest non-validated peer to avoid having too many of these
useless connections.
Note that this patch significantly changes the meaning of the various
configuration parameters for "max connections". The next patch will
remove all of these.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_thread_init_status() contains an open-coded
store_release_wake_up(). It is cleaner to use that function directly
rather than needing to remember the barrier.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use page_to_phys instead of open coding it now that it is available in an
architecture independent way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250106081437.798213-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is handy to know whether the link has playback-only/capture-only flags
when debugging.
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250106050659.57924-3-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These fields are from the dai_link, not the dai.
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250106050659.57924-2-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since these are hidden inside CONFIG_REGULATOR, building the consumer
drivers without CONFIG_REGULATOR will result in the following build error:
>> drivers/pci/pwrctrl/slot.c:39:15: error: implicit declaration of
function 'of_regulator_bulk_get_all'; did you mean 'regulator_bulk_get'?
[-Werror=implicit-function-declaration]
39 | ret = of_regulator_bulk_get_all(dev, dev_of_node(dev),
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| regulator_bulk_get
cc1: some warnings being treated as errors
This also removes the duplicated definitions that were possibly added to
fix the build issues.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501020407.HmQQQKa0-lkp@intel.com/
Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250104115058.19216-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the definition is in drivers/regulator/of_regulator.c and compiled
only if CONFIG_OF is enabled, building the consumer driver without
CONFIG_OF and with CONFIG_REGULATOR will result in below build error:
ERROR: modpost: "of_regulator_bulk_get_all" [drivers/pci/pwrctrl/pci-pwrctl-slot.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412181640.12Iufkvd-lkp@intel.com/
Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250104115058.19216-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper function in include/linux/io_uring/cmd.h to read the
async_data pointer from a struct io_uring_cmd.
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In case an op handler for ->uring_cmd() needs stable storage for user
data, it can allocate io_uring_cmd_data->op_data and use it for the
duration of the request. When the request gets cleaned up, uring_cmd
will free it automatically.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In preparation for making this more generically available for
->uring_cmd() usage that needs stable command data, rename it and move
it to io_uring/cmd.h instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The return value of amd_iommu_detect is not used, so remove it and
is consistent with other iommu detect functions.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250103165808.80939-1-gaoshiyuan@baidu.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add forward-declaration for the struct drm_display_mode, missed in the
commit 47368ab437fd ("drm/display: hdmi: add generic mode_valid helper")
Fixes: 47368ab437fd ("drm/display: hdmi: add generic mode_valid helper")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104-hdmi-state-display-mode-v1-1-3c06d36e726f@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Allow the user to configure needed_{head,tail}room for both netkit
devices. The idea is similar to 163e529200af ("veth: implement
ndo_set_rx_headroom") with the difference that the two parameters
can be specified upon device creation. By default the current behavior
stays as is which is needed_{head,tail}room is 0.
In case of Cilium, for example, the netkit devices are not enslaved
into a bridge or openvswitch device (rather, BPF-based redirection
is used out of tcx), and as such these parameters are not propagated
into the Pod's netns via peer device.
Given Cilium can run in vxlan/geneve tunneling mode (needed_headroom)
and/or be used in combination with WireGuard (needed_{head,tail}room),
allow the Cilium CNI plugin to specify these two upon netkit device
creation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/bpf/20241220234658.490686-1-daniel@iogearbox.net
|
|
Packets handled by hardware have added secpath as a way to inform XFRM
core code that this path was already handled. That secpath is not needed
at all after policy is checked and it is removed later in the stack.
However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward),
that secpath is not removed and packets which already were handled are reentered
to the driver TX path with xfrm_offload set.
The following kernel panic is observed in mlx5 in such case:
mlx5_core 0000:04:00.0 enp4s0f0np0: Link up
mlx5_core 0000:04:00.1 enp4s0f1np1: Link up
Initializing XFRM netlink socket
IPsec XFRM device driver
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: Oops: 0010 [#1] PREEMPT SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffb87380003800 EFLAGS: 00010206
RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf
RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00
RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010
R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00
R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e
FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
? show_regs+0x63/0x70
? __die_body+0x20/0x60
? __die+0x2b/0x40
? page_fault_oops+0x15c/0x550
? do_user_addr_fault+0x3ed/0x870
? exc_page_fault+0x7f/0x190
? asm_exc_page_fault+0x27/0x30
mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core]
mlx5e_xmit+0x58e/0x1980 [mlx5_core]
? __fib_lookup+0x6a/0xb0
dev_hard_start_xmit+0x82/0x1d0
sch_direct_xmit+0xfe/0x390
__dev_queue_xmit+0x6d8/0xee0
? __fib_lookup+0x6a/0xb0
? internal_add_timer+0x48/0x70
? mod_timer+0xe2/0x2b0
neigh_resolve_output+0x115/0x1b0
__neigh_update+0x26a/0xc50
neigh_update+0x14/0x20
arp_process+0x2cb/0x8e0
? __napi_build_skb+0x5e/0x70
arp_rcv+0x11e/0x1c0
? dev_gro_receive+0x574/0x820
__netif_receive_skb_list_core+0x1cf/0x1f0
netif_receive_skb_list_internal+0x183/0x2a0
napi_complete_done+0x76/0x1c0
mlx5e_napi_poll+0x234/0x7a0 [mlx5_core]
__napi_poll+0x2d/0x1f0
net_rx_action+0x1a6/0x370
? atomic_notifier_call_chain+0x3b/0x50
? irq_int_handler+0x15/0x20 [mlx5_core]
handle_softirqs+0xb9/0x2f0
? handle_irq_event+0x44/0x60
irq_exit_rcu+0xdb/0x100
common_interrupt+0x98/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
RIP: 0010:pv_native_safe_halt+0xb/0x10
Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22
0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb
40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8
RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680
RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4
RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70
R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40
R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8
? default_idle+0x9/0x20
arch_cpu_idle+0x9/0x10
default_idle_call+0x29/0xf0
do_idle+0x1f2/0x240
cpu_startup_entry+0x2c/0x30
rest_init+0xe7/0x100
start_kernel+0x76b/0xb90
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xc0/0x110
? setup_ghcb+0xe/0x130
common_startup_64+0x13e/0x141
</TASK>
Modules linked in: esp4_offload esp4 xfrm_interface
xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc
intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw
qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc
scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456
async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx
libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul
polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3
sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample
virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffb87380003800 EFLAGS: 00010206
RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf
RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00
RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010
R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00
R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e
FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 5958372ddf62 ("xfrm: add RX datapath protection for IPsec packet offload mode")
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 18 are MM and 7 are non-MM.
The usual bunch of singletons and two doubletons - please see the
relevant changelogs for details"
* tag 'mm-hotfixes-stable-2025-01-04-18-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
MAINTAINERS: change Arınç _NAL's name and email address
scripts/sorttable: fix orc_sort_cmp() to maintain symmetry and transitivity
mm/util: make memdup_user_nul() similar to memdup_user()
mm, madvise: fix potential workingset node list_lru leaks
mm/damon/core: fix ignored quota goals and filters of newly committed schemes
mm/damon/core: fix new damon_target objects leaks on damon_commit_targets()
mm/list_lru: fix false warning of negative counter
vmstat: disable vmstat_work on vmstat_cpu_down_prep()
mm: shmem: fix the update of 'shmem_falloc->nr_unswapped'
mm: shmem: fix incorrect index alignment for within_size policy
percpu: remove intermediate variable in PERCPU_PTR()
mm: zswap: fix race between [de]compression and CPU hotunplug
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
fs/proc/task_mmu: fix pagemap flags with PMD THP entries on 32bit
kcov: mark in_softirq_really() as __always_inline
docs: mm: fix the incorrect 'FileHugeMapped' field
mailmap: modify the entry for Mathieu Othacehe
mm/kmemleak: fix sleeping function called from invalid context at print message
mm: hugetlb: independent PMD page table shared count
maple_tree: reload mas before the second call for mas_empty_area
...
|
|
There is not real point in a helper just to assign three values to four
fields, especially when the surrounding code is working on the
neighbor fields directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20250103073417.459715-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lift bio_split_rw_at into blk_rq_append_bio so that it validates the
hardware limits. With this all passthrough callers can simply add
bio_add_page to build the bio and delay checking for exceeding of limits
to this point instead of doing it for each page.
While this looks like adding a new expensive loop over all bio_vecs,
blk_rq_append_bio is already doing that just to counter the number of
segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20250103073417.459715-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When CONFIG_AUDIT is set, its CONFIG_NET dependency is also set, and the
dev_get_by_index and init_net symbols (used by dump_common_audit_data)
are found by the linker. dump_common_audit_data() should then failed to
build when CONFIG_NET is not set. However, because the compiler is
smart, it knows that audit_log_start() always return NULL when
!CONFIG_AUDIT, and it doesn't build the body of common_lsm_audit(). As
a side effect, dump_common_audit_data() is not built and the linker
doesn't error out because of missing symbols.
Let's only build lsm_audit.o when CONFIG_SECURITY and CONFIG_AUDIT are
both set, which is checked with the new CONFIG_HAS_SECURITY_AUDIT.
ipv4_skb_to_auditdata() and ipv6_skb_to_auditdata() are only used by
Smack if CONFIG_AUDIT is set, so they don't need fake implementations.
Because common_lsm_audit() is used in multiple places without
CONFIG_AUDIT checks, add a fake implementation.
Link: https://lore.kernel.org/r/20241122143353.59367-2-mic@digikod.net
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: James Morris <jmorris@namei.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
If the backlog of listen() is set to zero, sk_acceptq_is_full() allows
one connection to be made, but inet_csk_reqsk_queue_is_full() does not.
When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full()
will cause an immediate drop before the sk_acceptq_is_full() check in
tcp_conn_request(), resulting in no connection can be made.
This patch tries to keep consistent with 64a146513f8f ("[NET]: Revert
incorrect accept queue backlog changes.").
Link: https://lore.kernel.org/netdev/20250102080258.53858-1-kuniyu@amazon.com/
Fixes: ef547f2ac16b ("tcp: remove max_qlen_log")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250102171426.915276-1-dzq.aishenghu0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This helper functions reduce the burden in the drivers that want to
fetch a gain and time selector for a given scale or a new optimal gain.
The former is currently achieved by calling
iio_gts_find_gain_sel_for_scale_using_time() for the current time
selector, and then iterating over the rest of time selectors if the
gain selector was not found.
The latter requires a combination of multiple iio-gts helpers to find
the new gain, look for an optimal gain if there was no exact match, and
set a minimum gain if the optimal gain is not in the range of available
gains.
Provide simpler workflows by means of functions that address common
patterns in the users of the iio-gts helpers.
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241230-veml3235_scale-v3-1-48a5795e2f64@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Export PLL_VIDEO_2X and PLL_MIPI, these will be used to explicitly
select TCON0 clock parent in dts
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20250104074035.1611136-2-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
simple_empty() and simple_offset_empty() perform the same task.
The latter's use as a canary to find bugs has not found any new
issues. A subsequent patch will remove the use of the mtree for
iterating directory contents, so revert back to using a similar
mechanism for determining whether a directory is indeed empty.
Only one such mechanism is ever needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Bring in the VFS changes for uncached buffered io.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a file system supports uncached buffered IO, it may set FOP_DONTCACHE
and enable support for RWF_DONTCACHE. If RWF_DONTCACHE is attempted
without the file system supporting it, it'll get errored with -EOPNOTSUPP.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20241220154831.1086649-8-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The HDMI Connectors need to perform a variety of tasks when the HDMI
connector state changes. Such tasks include setting or invalidating CEC
address, notifying HDMI codec driver, updating scrambler data, etc.
Implementing such tasks in a driver-specific callbacks is error prone.
Start implementing the generic helper function (currently handling only
the HDMI Codec framework) to be used by drivers utilizing HDMI Connector
framework.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add necessary glue code to be able to use new HDMI codec framework from
the DRM bridge drivers. The drm_bridge implements a limited set of the
hdmi_codec_ops interface, with the functions accepting both
drm_connector and drm_bridge instead of just a generic void pointer.
This framework is integrated with the DRM HDMI Connector framework, but
can also be used for DisplayPort connectors.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-4-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Several DRM drivers implement HDMI codec support (despite its name it
applies to both HDMI and DisplayPort drivers). Implement generic
framework to be used by these drivers. This removes a requirement to
implement get_eld() callback and provides default implementation for
codec's plug handling.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The no_capture_mute flag might differ from platform to platform,
especially in the case of the wrapping implementations, like the
upcoming DRM HDMI Codec framework. Move the flag next to all other flags
in struct hdmi_codec_pdata.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The upcoming DRM connector HDMI codec implementation is going to use
codec-specific data in the .get_dai_id to get drm_connector. Pass data
to the callback, as it is done with other hdmi_codec_ops callbacks.
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Due to the removal of the Niagara2 SPU driver, crypto_hash_walk_first(),
crypto_hash_walk_done(), crypto_hash_walk_last(), and struct
crypto_hash_walk are now only used in crypto/ahash.c. Therefore, make
them all private to crypto/ahash.c. I.e. un-export the two functions
that were exported, make the functions static, and move the struct
definition to the .c file. As part of this, move the functions to
earlier in the file to avoid needing to add forward declarations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireles and netfilter.
Nothing major here. Over the last two weeks we gathered only around
two-thirds of our normal weekly fix count, but delaying sending these
until -rc7 seemed like a really bad idea.
AFAIK we have no bugs under investigation. One or two reverts for
stuff for which we haven't gotten a proper fix will likely come in the
next PR.
Current release - fix to a fix:
- netfilter: nft_set_hash: unaligned atomic read on struct
nft_set_ext
- eth: gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
Previous releases - regressions:
- net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
- mptcp:
- fix sleeping rcvmsg sleeping forever after bad recvbuffer adjust
- fix TCP options overflow
- prevent excessive coalescing on receive, fix throughput
- net: fix memory leak in tcp_conn_request() if map insertion fails
- wifi: cw1200: fix potential NULL dereference after conversion to
GPIO descriptors
- phy: micrel: dynamically control external clock of KSZ PHY, fix
suspend behavior
Previous releases - always broken:
- af_packet: fix VLAN handling with MSG_PEEK
- net: restrict SO_REUSEPORT to inet sockets
- netdev-genl: avoid empty messages in NAPI get
- dsa: microchip: fix set_ageing_time function on KSZ9477 and LAN937X
- eth:
- gve: XDP fixes around transmit, queue wakeup etc.
- ti: icssg-prueth: fix firmware load sequence to prevent time
jump which breaks timesync related operations
Misc:
- netlink: specs: mptcp: add missing attr and improve documentation"
* tag 'net-6.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init
net: ti: icssg-prueth: Fix firmware load sequence.
mptcp: prevent excessive coalescing on receive
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()
mptcp: fix recvbuffer adjust on sleeping rcvmsg
ila: serialize calls to nf_register_net_hooks()
af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK
af_packet: fix vlan_get_tci() vs MSG_PEEK
net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()
net: restrict SO_REUSEPORT to inet sockets
net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets
net: sfc: Correct key_len for efx_tc_ct_zone_ht_params
net: wwan: t7xx: Fix FSM command timeout issue
sky2: Add device ID 11ab:4373 for Marvell 88E8075
mptcp: fix TCP options overflow.
net: mv643xx_eth: fix an OF node reference leak
gve: trigger RX NAPI instead of TX NAPI in gve_xsk_wakeup
eth: bcmsysport: fix call balance of priv->clk handling routines
net: llc: reset skb->transport_header
netlink: specs: mptcp: fix missing doc
...
|
|
Renesas RZ/G3E Pin Control DT Binding Definitions
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
|
|
Renesas RZ/V2H Pin Control DT Binding Definitions
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
|
|
renesas-pinctrl-for-v6.14
Renesas RZ/G3E Pin Control DT Binding Definitions
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
|
|
renesas-pinctrl-for-v6.14
Renesas RZ/V2H Pin Control DT Binding Definitions
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
|
|
Add documentation for the pin controller found on the Renesas RZ/G3E
(R9A09G047) SoC. The RZ/G3E PFC is similar to the RZ/V2H SoC but has more
pins(P00-PS3).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/V2H has ports P0-P9 and PA-PB. Add support for defining alpha-numerical
ports in DT using RZV2H_* macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A lot of fixes accumulated over the holiday break:
- Static tool fixes, value is already proven to be NULL, possible
integer overflow
- Many bnxt_re fixes:
- Crashes due to a mismatch in the maximum SGE list size
- Don't waste memory for user QPs by creating kernel-only
structures
- Fix compatability issues with older HW in some of the new HW
features recently introduced: RTS->RTS feature, work around 9096
- Do not allow destroy_qp to fail
- Validate QP MTU against device limits
- Add missing validation on madatory QP attributes for RTR->RTS
- Report port_num in query_qp as required by the spec
- Fix creation of QPs of the maximum queue size, and in the
variable mode
- Allow all QPs to be used on newer HW by limiting a work around
only to HW it affects
- Use the correct MSN table size for variable mode QPs
- Add missing locking in create_qp() accessing the qp_tbl
- Form WQE buffers correctly when some of the buffers are 0 hop
- Don't crash on QP destroy if the userspace doesn't setup the
dip_ctx
- Add the missing QP flush handler call on the DWQE path to avoid
hanging on error recovery
- Consistently use ENXIO for return codes if the devices is
fatally errored
- Try again to fix VLAN support on iwarp, previous fix was reverted
due to breaking other cards
- Correct error path return code for rdma netlink events
- Remove the seperate net_device pointer in siw and rxe which
syzkaller found a way to UAF
- Fix a UAF of a stack ib_sge in rtrs
- Fix a regression where old mlx5 devices and FW were wrongly
activing new device features and failing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/mlx5: Enable multiplane mode only when it is supported
RDMA/bnxt_re: Fix error recovery sequence
RDMA/rtrs: Ensure 'ib_sge list' is accessible
RDMA/rxe: Remove the direct link to net_device
RDMA/hns: Fix missing flush CQE for DWQE
RDMA/hns: Fix warning storm caused by invalid input in IO path
RDMA/hns: Fix accessing invalid dip_ctx during destroying QP
RDMA/hns: Fix mapping error of zero-hop WQE buffer
RDMA/bnxt_re: Fix the locking while accessing the QP table
RDMA/bnxt_re: Fix MSN table size for variable wqe mode
RDMA/bnxt_re: Add send queue size check for variable wqe
RDMA/bnxt_re: Disable use of reserved wqes
RDMA/bnxt_re: Fix max_qp_wrs reported
RDMA/siw: Remove direct link to net_device
RDMA/nldev: Set error code in rdma_nl_notify_event
RDMA/bnxt_re: Fix reporting hw_ver in query_device
RDMA/bnxt_re: Fix to export port num to ib_query_qp
RDMA/bnxt_re: Fix setting mandatory attributes for modify_qp
RDMA/bnxt_re: Add check for path mtu in modify_qp
RDMA/bnxt_re: Fix the check for 9060 condition
...
|
|
btf_id is missing
There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n.
In particular, the report is on tcp_congestion_ops that has
a "struct module *owner" member.
For struct_ops that has a "struct module *owner" member,
it can be extended either by the regular kernel module or
by the bpf_struct_ops. bpf_try_module_get() will be used
to do the refcounting and different refcount is done
based on the owner pointer. When CONFIG_MODULES=n,
the btf_id of the "struct module" is missing:
WARN: resolve_btfids: unresolved symbol module
Thus, the bpf_try_module_get() cannot do the correct refcounting.
Not all subsystem's struct_ops requires the "struct module *owner" member.
e.g. the recent sched_ext_ops.
This patch is to disable bpf_struct_ops registration if
the struct_ops has the "struct module *" member and the
"struct module" btf_id is missing. The btf_type_is_fwd() helper
is moved to the btf.h header file for this test.
This has happened since the beginning of bpf_struct_ops which has gone
through many changes. The Fixes tag is set to a recent commit that this
patch can apply cleanly. Considering CONFIG_MODULES=n is not
common and the age of the issue, targeting for bpf-next also.
Fixes: 1611603537a4 ("bpf: Create argument information for nullable arguments.")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/bpf/74665.1733669976@localhost/
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241220201818.127152-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds MSM_PARAM_UCHE_TRAP_BASE that will be used by Mesa
implementation for VK_KHR_shader_clock and GL_ARB_shader_clock.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/627036/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port")
Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org
Cc: stable@vger.kernel.org
Reported-by: Francesco Poli <invernomuto@paranoici.org>
Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
