summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-07-23padata: remove stop functionDaniel Jordan
padata_stop() has two callers and is unnecessary in both cases. When pcrypt calls it before padata_free(), it's being unloaded so there are no outstanding padata jobs[0]. When __padata_free() calls it, it's either along the same path or else pcrypt initialization failed, which of course means there are also no outstanding jobs. Removing it simplifies padata and saves text. [0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/ Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-23padata: remove start functionDaniel Jordan
padata_start() is only used right after pcrypt allocates an instance with all possible CPUs, when PADATA_INVALID can't happen, so there's no need for a separate "start" step. It can be done during allocation to save text, make using padata easier, and avoid unneeded calls in the future. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-23Merge tag 'fpga-for-5.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.9-rc1 Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge window. DFL: - Xu's changes add support for AFU interrupt handling and puts them to use for error handling. - Xu's other change also adds another device-id for the Intel FPGA PAC N3000. - John's change converts from using get_user_pages() to pin_user_pages(). - Gustavo's patch cleans up some of the allocation by using struct_size(). Xilinx: - Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers and updates the comments and dt-bindings to reflect the fact it also supports 7 series devices. Core: - Tom cleaned up the fpga-bridge / fpga-mgr core by removing some dead-stores. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add device id for Intel FPGA PAC N3000 Documentation: fpga: dfl: add descriptions for interrupt related interfaces. fpga: dfl: afu: add AFU interrupt support fpga: dfl: fme: add interrupt support for global error reporting fpga: dfl: afu: add interrupt support for port error reporting fpga: dfl: introduce interrupt trigger setting API fpga: dfl: pci: add irq info for feature devices enumeration fpga: dfl: parse interrupt info for feature devices on enumeration fpga manager: xilinx-spi: check INIT_B pin during write_init dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO fpga: Fix dead store in fpga-bridge.c fpga: Fix dead store fpga-mgr.c fpga: dfl: Use struct_size() in kzalloc() fpga manager: xilinx-spi: remove unneeded, mistyped variables fpga manager: xilinx-spi: valid for the 7 Series too dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
2020-07-23Merge tag 'soundwire-5.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.9-rc1 This contains few core changes and bunch of Intel driver updates: - Adds definitions for 1.2 spec - Sanyog left as a MAINTAINER and Bard took his place while Sanyog is a reviewer now. - Intel: Lots of updates to stream/dai handling, wake support and link synchronization. * tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits) Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx soundwire: intel: add wake interrupt support soundwire: intel/cadence: merge Soundwire interrupt handlers/threads soundwire: intel_init: use EXPORT_SYMBOL_NS soundwire: intel_init: add implementation of sdw_intel_enable_irq() soundwire: intel: introduce helper for link synchronization soundwire: intel: introduce a helper to arm link synchronization soundwire: intel: revisit SHIM programming sequences. soundwire: intel: reuse code for wait loops to set/clear bits soundwire: fix the kernel-doc comment soundwire: sdw.h: fix indentation soundwire: sdw.h: fix PRBS/Static_1 swapped definitions soundwire: intel: don't free dma_data in DAI shutdown soundwire: cadence: allocate/free dma_data in set_sdw_stream soundwire: intel: remove stream allocation/free soundwire: stream: add helper to startup/shutdown streams soundwire: intel: implement get_sdw_stream() operations MAINTAINERS: change SoundWire maintainer soundwire: bus: initialize bus clock base and scale registers soundwire: extend SDW_SLAVE_ENTRY ...
2020-07-23Merge tag 'amd-drm-next-5.9-2020-07-17' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.9-2020-07-17: amdgpu: - SI UVD/VCE clock support - Updates for Sienna Cichlid - Expose drm rotation property - Atomfirmware updates for renoir - updates to GPUVM hub handling for different register layouts - swSMU restructuring and cleanups - RAS fixes - DC fixes - mode1 reset support for Sienna Cichlid - Add support for Navy Flounder GPUs amdkfd: - Add SMI events watch interface UAPI: - Add amdkfd SMI events watch interface Userspace which uses this interface: https://github.com/RadeonOpenCompute/rocm_smi_lib/commit/2235ede34c456f1c7d3490f6fe74825d442d272e Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200717132022.4014-1-alexander.deucher@amd.com
2020-07-23Merge tag 'drm-xilinx-dpsub-20200718' of git://linuxtv.org/pinchartl/media ↵Dave Airlie
into drm-next Xilinx ZynqMP DisplayPort Subsystem driver Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200718001755.GA5962@pendragon.ideasonboard.com
2020-07-23Merge tag 'drm-misc-next-2020-07-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: Cross-subsystem Changes: - Convert panel-dsi-cm and ingenic bindings to YAML. - Add lockdep annotations for dma-fence. \o/ - Describe why indefinite fences are a bad idea - Update binding for rocktech jh057n00900. Core Changes: - Add vblank workers. - Use spin_(un)lock_irq instead of the irqsave/restore variants in crtc code. - Add managed vram helpers. - Convert more logging to drm functions. - Replace more http links with https in core and drivers. - Cleanup to ttm iomem functions and implementation. - Remove TTM CMA memtype as it doesn't work correctly. - Remove TTM_MEMTYPE_FLAG_MAPPABLE for many drivers that have no unmappable memory resources. Driver Changes: - Add CRC support to nouveau, using the new vblank workers. - Dithering and atomic state fix for nouveau. - Fixes for Frida FRD350H54004 panel. - Add support for OSD mode (sprite planes), IPU (scaling) and multiple panels/bridges to ingenic. - Use managed vram helpers in ast. - Assorted small fixes to ingenic, i810, mxsfb. - Remove optional unused ttm dummy functions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d6bf269e-ccb2-8a7b-fdae-226e9e3f8274@linux.intel.com
2020-07-22qed: introduce qed_chain_get_elem_used{,u32}()Alexander Lobakin
Add reverse-variants of qed_chain_get_elem_left{,u32}() to be able to know current chain occupation. They will be used in the upcoming qede XDP_REDIRECT code. They share most of the logics with the mentioned ones, so were reused to collapse the latters. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: optimize common chain accessorsAlexander Lobakin
Constify chain pointers and refactor qed_chain_get_elem_left{,u32}() a bit. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: add support for different page sizes for chainsAlexander Lobakin
Extend current infrastructure to store chain page size in a struct and use it in all functions instead of fixed QED_CHAIN_PAGE_SIZE. Its value remains the default one, but can be overridden in qed_chain_init_params before chain allocation. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: simplify chain allocation with init params structAlexander Lobakin
To simplify qed_chain_alloc() prototype and call sites, introduce struct qed_chain_init_params to specify chain params, and pass a pointer to filled struct to the actual qed_chain_alloc() instead of a long list of separate arguments. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: move chain initialization inlines next to allocation functionsAlexander Lobakin
qed_chain_init*() are used in one file/place on "cold" path only, so they can be uninlined and moved next to the call sites. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: sanitize PBL chains allocationAlexander Lobakin
PBL chain elements are actually DMA addresses stored in __le64, but currently their size is hardcoded to 8, and DMA addresses are assigned via cast to variable-sized dma_addr_t without any bitwise conversions. Change the type of pbl_virt array to match the actual one, add a new field to store the size of allocated DMA memory and sanitize elements assignment. Misc: give more logic names to the members of qed_chain::pbl_sp embedded struct. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: reformat "qed_chain.h" a bitAlexander Lobakin
Reformat structs and macros definitions a bit prior to making functional changes. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge tag 'samsung-soc-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.9 1. Restore big.LITTLE cpuidle support on Exynos542x boards. 2. Cleanups and minor fixes. * tag 'samsung-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c24xx: Replace HTTP links with HTTPS ones ARM: s3c24xx: leds: Convert to use GPIO descriptors ARM: exynos: MCPM: Restore big.LITTLE cpuidle support ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val Link: https://lore.kernel.org/r/20200721180900.13844-4-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-drivers-for-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.9 For RPMh this fixes an issue where ktime was used during suspend, allows the driver to be used on ARM targets and some minor cleanups. It adds support for the latest format version in the socinfo driver and adds identifiers for SM8250 and SDM630. SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM gains compatibles MSM8994 and IPQ8074. The GENI core code gains interconnect path voting and performance level support, with subsequent patches integrating this with the SPI, I2C, UART and QSPI drivers. Following this the KGDB support for the GENI serial driver is improved, the performance related to chip-select is improved for SPI and QSPI. * tag 'qcom-drivers-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits) soc: qcom: geni: Fix NULL pointer dereference tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for console serial: qcom_geni_serial: Always use 4 bytes per TX FIFO word serial: qcom_geni_serial: Make kgdb work even if UART isn't console spi: spi-geni-qcom: Get rid of most overhead in prepare_message() spi: spi-geni-qcom: Set the clock properly at runtime resume spi: spi-geni-qcom: Avoid clock setting if not needed spi: spi-qcom-qspi: Set an autosuspend delay of 250 ms spi: spi-qcom-qspi: Avoid clock setting if not needed spi: spi-qcom-qspi: Use OPP API to set clk/perf state firmware: qcom_scm: Add msm8994 compatible firmware: qcom_scm: Fix legacy convention SCM accessors <linux/of.h>: add stub for of_get_next_parent() to fix qcom build error dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC spi: spi-geni-qcom: Use OPP API to set clk/perf state tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state spi: spi-qcom-qspi: Add interconnect support spi: spi-geni-qcom: Add interconnect support spi: spi-geni-qcom: Combine the clock setting code tty: serial: qcom_geni_serial: Add interconnect support ... Link: https://lore.kernel.org/r/20200721044812.3429652-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-drivers-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.9: - Update SCU irq code to call pm_system_wakeup() in general MU IRQ handler, so that system can be waked up when MU IRQ arrives. - Move i.MX SCU soc driver into imx firmware folder to get it initialized from i.MX SCU firmware driver. - Clean up soc-imx-scu driver a bit by using devm_kasprintf(). - Correct postfix setting for cm40 power domain in scu-pd driver. - Add resource management support for IMX_SCU firmware driver. - Add more cm4 resources to i.MX SCU power domain driver. - Select ARM_GIC_V3 from SOC_IMX8M for being able to use GICv3 driver in AARCH32 mode Linux on AARCH64 hardware. * tag 'imx-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: select ARM_GIC_V3 for i.MX8M firmware: imx: Move i.MX SCU soc driver into imx firmware folder firmware: imx: scu-pd: add more cm4 resources firmware: imx: add resource management api firmware: imx: scu-pd: fix cm40 power domain soc: imx: scu: use devm_kasprintf firmware: imx: make sure MU irq can wake up system from suspend mode Link: https://lore.kernel.org/r/20200720085536.24138-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
arm/drivers Reset controller updates for v5.9 This tag moves the reset-simple header out of drivers/reset for use by drivers outside of drivers/reset, adds a .reset() callback to reset-simple, converts i.MX reset bindings to json-schema, fixes a compile warning in the reset-intel-gw driver, and replaces some HTTP links with HTTPS ones in comments. * tag 'reset-for-v5.9' of git://git.pengutronix.de/pza/linux: reset: Replace HTTP links with HTTPS ones reset: intel: fix a compile warning about REG_OFFSET redefined dt-bindings: reset: Convert i.MX7 reset to json-schema dt-bindings: reset: Convert i.MX reset to json-schema reset: simple: Add reset callback reset: Move reset-simple header out of drivers/reset Link: https://lore.kernel.org/r/b718f052e38abbaac599d80645376b75e54aa5bd.camel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22dt-bindings: clock: sparx5: Add bindings include fileLars Povlsen
The Sparx5 support 9 different clock outputs. This include file has defines for each supported clock ordinal. Link: https://lore.kernel.org/r/20200615133242.24911-8-lars.povlsen@microchip.com Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-dt-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 46 non-merge commits during the last 6 day(s) which contain a total of 68 files changed, 4929 insertions(+), 526 deletions(-). The main changes are: 1) Run BPF program on socket lookup, from Jakub. 2) Introduce cpumap, from Lorenzo. 3) s390 JIT fixes, from Ilya. 4) teach riscv JIT to emit compressed insns, from Luke. 5) use build time computed BTF ids in bpf iter, from Yonghong. ==================== Purely independent overlapping changes in both filter.h and xdp.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22Merge branch 'ib-5.8-tcb' into HEADJonathan Cameron
Series needed as base for a clocksource tree hence immutable branch
2020-07-22Merge branch 'ib-5.8-jz47xx-ts' into HEADJonathan Cameron
Immutable branch may be needed in input for a joystick set that is dependent on it.
2020-07-22leds: trigger: add support for LED-private device triggersMarek Behún
Some LED controllers may come with an internal HW triggering mechanism for the LED and the ability to switch between SW control and the internal HW control. This includes most PHYs, various ethernet switches, the Turris Omnia LED controller or AXP20X PMIC. This adds support for registering such triggers. This code is based on work by Pavel Machek <pavel@ucw.cz> and Ondřej Jirman <megous@megous.com>. Signed-off-by: Marek Behún <marek.behun@nic.cz> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-22leds: lp55xx: Add multicolor framework support to lp55xxDan Murphy
Add multicolor framework support for the lp55xx family. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-22leds: multicolor: Introduce a multicolor class definitionDan Murphy
Introduce a multicolor class that groups colored LEDs within a LED node. The multicolor class groups monochrome LEDs and allows controlling two aspects of the final combined color: hue and lightness. The former is controlled via the intensity file and the latter is controlled via brightness file. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> [squashed leds: multicolor: Fix camel case in documentation in]
2020-07-22misc: rtsx: Use standard PCI definitionsBjorn Helgaas
When reading registers defined by the PCIe spec, use the names already defined by the PCI core. This makes maintenance of the PCI core and drivers easier. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org [ additional replacements due to changes in my tree - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Find L1 PM Substates capability instead of hard-codingBjorn Helgaas
Instead of hard-coding the location of the L1 PM Substates capability based on the Device ID, search for it in the extended capabilities list. This works for any device, as long as it implements the L1 PM Substates capability correctly, so it doesn't require maintenance as new devices are added. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org [ minor addition due to differences in my tree - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Remove rtsx_pci_read/write_config() wrappersBjorn Helgaas
rtsx_pci_read_config_dword() and similar wrappers around the PCI config accessors add very little value, and they obscure the fact that often we are accessing standard PCI registers that should be coordinated with the PCI core. Remove the wrappers and use the PCI config accessors directly. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org [ fixed up some other instances as original patch was based on old tree - gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Remove unused pcie_capBjorn Helgaas
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-3-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22i2c: drop duplicated word in the header fileRandy Dunlap
Drop the doubled word "be" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-22perf: <linux/perf_event.h>: drop a duplicated wordRandy Dunlap
Drop the repeated word "the" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200719003027.20798-1-rdunlap@infradead.org
2020-07-22arch_topology, sched/core: Cleanup thermal pressure definitionValentin Schneider
The following commit: 14533a16c46d ("thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code") moved the definition of arch_set_thermal_pressure() to sched/core.c, but kept its declaration in linux/arch_topology.h. When building e.g. an x86 kernel with CONFIG_SCHED_THERMAL_PRESSURE=y, cpufreq_cooling.c ends up getting the declaration of arch_set_thermal_pressure() from include/linux/arch_topology.h, which is somewhat awkward. On top of this, sched/core.c unconditionally defines o The thermal_pressure percpu variable o arch_set_thermal_pressure() while arch_scale_thermal_pressure() does nothing unless redefined by the architecture. arch_*() functions are meant to be defined by architectures, so revert the aforementioned commit and re-implement it in a way that keeps arch_set_thermal_pressure() architecture-definable, and doesn't define the thermal pressure percpu variable for kernels that don't need it (CONFIG_SCHED_THERMAL_PRESSURE=n). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200712165917.9168-2-valentin.schneider@arm.com
2020-07-22trace/events/sched.h: fix duplicated wordRandy Dunlap
Change "It it" to "It is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/25305c1d-4ee8-e091-d20f-e700ddad49fd@infradead.org
2020-07-22linux/sched/mm.h: drop duplicated words in commentsRandy Dunlap
Drop doubled words "to" and "that". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/927ea8d8-3f6c-9b65-4c2b-63ab4bd59ef1@infradead.org
2020-07-22sched: nohz: stop passing around unused "ticks" parameter.Paul Gortmaker
The "ticks" parameter was added in commit 0f004f5a696a ("sched: Cure more NO_HZ load average woes") since calc_global_nohz() was called and needed the "ticks" argument. But in commit c308b56b5398 ("sched: Fix nohz load accounting -- again!") it became unused as the function calc_global_nohz() dropped using "ticks". Fixes: c308b56b5398 ("sched: Fix nohz load accounting -- again!") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1593628458-32290-1-git-send-email-paul.gortmaker@windriver.com
2020-07-22sched: Better document ttwu()Peter Zijlstra
Dave hit the problem fixed by commit: b6e13e85829f ("sched/core: Fix ttwu() race") and failed to understand much of the code involved. Per his request a few comments to (hopefully) clarify things. Requested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200702125211.GQ4800@hirez.programming.kicks-ass.net
2020-07-22Merge branch 'sched/urgent'Peter Zijlstra
2020-07-22x86, vmlinux.lds: Page-align end of ..page_aligned sectionsJoerg Roedel
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
2020-07-21Merge branch 'for-linus' into nextDmitry Torokhov
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
2020-07-21raid: md_p.h: drop duplicated word in a commentRandy Dunlap
Drop the doubled word "the" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Song Liu <song@kernel.org> Cc: linux-raid@vger.kernel.org Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-21Merge branch 'elan-i2c' into nextDmitry Torokhov
Bring in update to Elan touchpad driver to support newer touchpads with higher resolution.
2020-07-21bareudp: Reverted support to enable & disable rx metadata collectionMartin Varghese
The commit fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") breaks the the original(5.7) default behavior of bareudp module to collect RX metadadata at the receive. It was added to avoid the crash at the kernel neighbour subsytem when packet with metadata from bareudp is processed. But it is no more needed as the commit 394de110a733 ("net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb") solves this crash. Fixes: fe80536acf83 ("bareudp: Added attribute to enable & disable rx metadata collection") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22ipvs: queue delayed work to expire no destination connections if ↵Andrew Sy Kim
expire_nodest_conn=1 When expire_nodest_conn=1 and a destination is deleted, IPVS does not expire the existing connections until the next matching incoming packet. If there are many connection entries from a single client to a single destination, many packets may get dropped before all the connections are expired (more likely with lots of UDP traffic). An optimization can be made where upon deletion of a destination, IPVS queues up delayed work to immediately expire any connections with a deleted destination. This ensures any reused source ports from a client (within the IPVS timeouts) are scheduled to new real servers instead of silently dropped. Signed-off-by: Andrew Sy Kim <kim.andrewsy@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-21devlink: Add comment for devlink instance lockParav Pandit
Add comment to describe the purpose of devlink instance lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21fs-verity: use smp_load_acquire() for ->i_verity_infoEric Biggers
Normally smp_store_release() or cmpxchg_release() is paired with smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with the more lightweight READ_ONCE(). However, for this to be safe, all the published memory must only be accessed in a way that involves the pointer itself. This may not be the case if allocating the object also involves initializing a static or global variable, for example. fsverity_info::tree_params.hash_alg->tfm is a crypto_ahash object that's internal to and is allocated by the crypto subsystem. So by using READ_ONCE() for ->i_verity_info, we're relying on internal implementation details of the crypto subsystem. Remove this fragile assumption by using smp_load_acquire() instead. Also fix the cmpxchg logic to correctly execute an ACQUIRE barrier when losing the cmpxchg race, since cmpxchg doesn't guarantee a memory barrier on failure. (Note: I haven't seen any real-world problems here. This change is just fixing the code to be guaranteed correct and less fragile.) Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()") Link: https://lore.kernel.org/r/20200721225920.114347-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-07-21fscrypt: use smp_load_acquire() for ->i_crypt_infoEric Biggers
Normally smp_store_release() or cmpxchg_release() is paired with smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with the more lightweight READ_ONCE(). However, for this to be safe, all the published memory must only be accessed in a way that involves the pointer itself. This may not be the case if allocating the object also involves initializing a static or global variable, for example. fscrypt_info includes various sub-objects which are internal to and are allocated by other kernel subsystems such as keyrings and crypto. So by using READ_ONCE() for ->i_crypt_info, we're relying on internal implementation details of these other kernel subsystems. Remove this fragile assumption by using smp_load_acquire() instead. (Note: I haven't seen any real-world problems here. This change is just fixing the code to be guaranteed correct and less fragile.) Fixes: e37a784d8b6a ("fscrypt: use READ_ONCE() to access ->i_crypt_info") Link: https://lore.kernel.org/r/20200721225920.114347-5-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-07-21net: phylink: add interface to configure clause 22 PCS PHYRussell King
Add an interface to configure the advertisement for a clause 22 PCS PHY, and set the AN enable flag in the BMCR appropriately. Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: phylink: add struct phylink_pcsRussell King
Add a way for MAC PCS to have private data while keeping independence from struct phylink_config, which is used for the MAC itself. We need this independence as we will have stand-alone code for PCS that is independent of the MAC. Introduce struct phylink_pcs, which is designed to be embedded in a driver private data structure. This structure does not include a mdio_device as there are PCS implementations such as the Marvell DSA and network drivers where this is not necessary. Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net: phylink: re-implement interface configuration with PCSRussell King
With PCS support, how we implement interface reconfiguration (or other major reconfiguration) is not up to the job; we end up reconfiguring the PCS for an interface change while the link could potentially be up. In order to solve this, add two additional MAC methods for major configuration, one to prepare for the change, and one to finish the change. This allows mvneta and mvpp2 to shutdown what they require prior to the MAC and PCS configuration calls, and then restart as appropriate. This impacts ksettings_set(), which now needs to identify whether the change is a minor tweak to the advertisement masks or whether the interface mode has changed, and call the appropriate function for that update. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 10:03:49 +0000