| Age | Commit message (Collapse) | Author |
|---|
|
auxiliary_find_device has been unused since commit
1c5de097bea3 ("net/mlx5: Fix mlx5_get_next_dev() peer device matching")
which was the only use since it was originally added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20240929141112.69824-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove macro list_for_each_reverse due to below reasons:
- it is same as list_for_each_prev.
- it is not used by current kernel tree.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240917-fix_list-v2-1-d2914665e89f@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the UART auxiliary devices. This enables access to up to
3 different UARTs, which are implemented in the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-9-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the battery auxiliary device. This enables monitoring of
the battery.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-8-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the fan auxiliary device. This enables monitoring of the
fan.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-7-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the SPI controller auxiliary device. This enables access
to the SPI flash of the FPGA and some other SPI devices.
The actual list of SPI devices is detected by reading some bits out of
the previously registered I2C EEPROM.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-4-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the return type of vxlan_snoop() from bool to enum
skb_drop_reason. In this commit, two drop reasons are introduced:
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce skb drop reasons to the function vxlan_rcv(). Following new
drop reasons are added:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_IP_TUNNEL_ECN
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make skb_vlan_inet_prepare return the skb drop reasons, which is just
what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of
it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the function pskb_inet_may_pull_reason() and make
pskb_inet_may_pull a simple inline call to it. The drop reasons of it just
come from pskb_may_pull_reason().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the function pskb_network_may_pull_reason() and make
pskb_network_may_pull() a simple inline call to it. The drop reasons of
it just come from pskb_may_pull_reason.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the index is ORed with V4L2_FMTDESC_FLAG_ENUM_ALL the
driver clears the flag and enumerate all the possible formats,
ignoring any limitations from the current configuration.
Drivers which do not support this flag yet always return an EINVAL.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: improved doc when the new flag is not supported by the driver]
|
|
pwm: Support for duty_offset
Support a new abstraction for pwm configuration that allows to specify
the time between start of period and the raising edge of the signal
("duty offset").
This is used in a patch series by Trevor Gamblin for triggering an ADC
conversion and afterwards read out the result. See
https://lore.kernel.org/linux-iio/20240909-ad7625_r1-v5-0-60a397768b25@baylibre.com/
for more details.
|
|
Simple type conversion with no functional change implied.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241010181535.3083262-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linux 6.12-rc2
Resolved movement of asm/unaligned.h to linux/unaligned.h
|
|
Add new helpers to export received or transmitted HDMI InfoFrames to
debugfs.
This complements similar code in drm where the transmitted HDMI infoframes
are exported to debugfs.
The same names have been used as in drm, so this is consistent.
The exported infoframes can be parsed with the edid-decode utility.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This new function returns the dentry of the top-level debugfs "v4l2"
directory. If it does not exist yet, then it is created first.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
|
|
After we made sure no fib_seq_read() handlers needs RTNL anymore,
we can remove RTNL from fib_seq_sum().
Note that after RTNL was dropped, fib_seq_sum() result was possibly
outdated anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib6_tables_seq_read() and
fib6_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib4_rules_seq_read()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() on readers.
Constify 'struct net' argument of fib_rules_seq_read()
and lookup_rules_ops().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xe3_lpd display is functionally identical to xe2_lpd for now so reuse
the device description. A separate xe3 definition will be added in the
future if/when new feature flags are required.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010224311.50133-2-matthew.s.atwood@intel.com
|
|
Remove the scaffold member from the lsm_prop. Remove the
remaining places it is being set.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace the secid in the netlbl_audit structure with an lsm_prop.
Remove scaffolding that was required when the value was a secid.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: fix the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Create a new LSM hook security_cred_getlsmprop() which, like
security_cred_getsecid(), fetches LSM specific attributes from the
cred structure. The associated data elements in the audit sub-system
are changed from a secid to a lsm_prop to accommodate multiple possible
LSM audit users.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the security_inode_getsecid() interface to fill in a
lsm_prop structure instead of a u32 secid. This allows for its
callers to gather data from all registered LSMs. Data is provided
for IMA and audit. Change the name to security_inode_getlsmprop().
Cc: linux-integrity@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the security_current_getsecid_subj() and
security_task_getsecid_obj() interfaces to fill in a lsm_prop structure
instead of a u32 secid. Audit interfaces will need to collect all
possible security data for possible reporting.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There may be more than one LSM that provides IPC data for auditing.
Change security_ipc_getsecid() to fill in a lsm_prop structure instead
of the u32 secid. Change the name to security_ipc_getlsmprop() to
reflect the change.
Cc: audit@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Replace the secid value stored in struct audit_context with a struct
lsm_prop. Change the code that uses this value to accommodate the
change. security_audit_rule_match() expects a lsm_prop, so existing
scaffolding can be removed. A call to security_secid_to_secctx()
is changed to security_lsmprop_to_secctx(). The call to
security_ipc_getsecid() is scaffolded.
A new function lsmprop_is_set() is introduced to identify whether
an lsm_prop contains a non-zero value.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak, fix lsmprop_is_set() typo]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add a new hook security_lsmprop_to_secctx() and its LSM specific
implementations. The LSM specific code will use the lsm_prop element
allocated for that module. This allows for the possibility that more
than one module may be called upon to translate a secid to a string,
as can occur in the audit code.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the secid parameter of security_audit_rule_match
to a lsm_prop structure pointer. Pass the entry from the
lsm_prop structure for the approprite slot to the LSM hook.
Change the users of security_audit_rule_match to use the
lsm_prop instead of a u32. The scaffolding function lsmprop_init()
fills the structure with the value of the old secid, ensuring that
it is available to the appropriate module hook. The sources of
the secid, security_task_getsecid() and security_inode_getsecid(),
will be converted to use the lsm_prop structure later in the series.
At that point the use of lsmprop_init() is dropped.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When more than one security module is exporting data to audit and
networking sub-systems a single 32 bit integer is no longer
sufficient to represent the data. Add a structure to be used instead.
The lsm_prop structure definition is intended to keep the LSM
specific information private to the individual security modules.
The module specific information is included in a new set of
header files under include/lsm. Each security module is allowed
to define the information included for its use in the lsm_prop.
SELinux includes a u32 secid. Smack includes a pointer into its
global label list. The conditional compilation based on feature
inclusion is contained in the include/lsm files.
Cc: apparmor@lists.ubuntu.com
Cc: bpf@vger.kernel.org
Cc: selinux@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: added include/linux/lsm/ to MAINTAINERS, subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
sysctl_tcp_l3mdev_accept is read from TCP receive fast path from
tcp_v6_early_demux(),
__inet6_lookup_established,
inet_request_bound_dev_if().
Move it to netns_ipv4_read_rx.
Remove the '#ifdef CONFIG_NET_L3_MASTER_DEV' that was guarding
its definition.
Note this adds a hole of three bytes that could be filled later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Link: https://patch.msgid.link/20241010034100.320832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a missing colon.
Cc: dri-devel@lists.freedesktop.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20241010160942.192caf60@canb.auug.org.au/
Fixes: fc5d96670eb2 ("drm/ttm: Move swapped objects off the manager's LRU list")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010124545.82023-1-thomas.hellstrom@linux.intel.com
|
|
When the eml_lock is already taken, we need an unlocked version.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007121241.30914-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Hardcoded driver date is useless, so use kernel version as a driver date
to make identifying .ko file easier. Also allow to pass DRIVER_DATE
on build time to allow versioning the driver in case it is built out
of the tree.
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930195322.461209-13-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
|
|
Fix a typo in comments: wether -> whether.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241010091355.8271-1-algonell@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
|
|
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit ebd2c8f6d2ec ("serial: kill off uart_info") has
removed uart_info, the uart_info declaration looks lonely,
let it go.
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240920053423.1373354-1-siyanteng@cqsoftware.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Setting the end address for a resource with a given size lacks a helper and
is therefore coded manually unlike the getter side which has a helper for
resource size calculation. Also, almost all callsites that calculate the
end address for a resource also set the start address right before it like
this:
res->start = start_addr;
res->end = res->start + size - 1;
Add resource_set_range(res, start_addr, size) that sets the start address
and calculates the end address to simplify this often repeated fragment.
Also add resource_set_size() for the cases where setting the start address
of the resource is not necessary but mention in its kerneldoc that
resource_set_range() is preferred when setting both addresses.
Link: https://lore.kernel.org/r/20240614100606.15830-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
# v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
# 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
# =FtY6
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_gt_mcr.c
# drivers/gpu/drm/xe/xe_tuning.c
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
|
|
The user thresholds mechanism is a way to have the userspace to tell
the thermal framework to send a notification when a temperature limit
is crossed. There is no id, no hysteresis, just the temperature and
the direction of the limit crossing. That means we can be notified
when a threshold is crossed the way up only, or the way down only or
both ways. That allows to create hysteresis values if it is needed.
A threshold can be added, deleted or flushed. The latter means all
thresholds belonging to a thermal zone will be deleted.
When a threshold is added:
- if the same threshold (temperature and direction) exists, an error
is returned
- if a threshold is specified with the same temperature but a
different direction, the specified direction is added
- if there is no threshold with the same temperature then it is
created
When a threshold is deleted:
- if the same threshold (temperature and direction) exists, it is
deleted
- if a threshold is specified with the same temperature but a
different direction, the specified direction is removed
- if there is no threshold with the same temperature, then an error
is returned
When the threshold are flushed:
- All thresholds related to a thermal zone are deleted
When a threshold is crossed:
- the userspace does not need to know which threshold(s) have been
crossed, it will be notified with the current temperature and the
previous temperature
- if multiple thresholds have been crossed between two updates only
one notification will be send to the userspace, it is pointless to
send a notification per thresholds crossed as the userspace can
handle that easily when it has the temperature delta information
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org
[ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
