summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-06-23Merge x86/urgent into x86/fpuBorislav Petkov
Pick up dependent changes which either went mainline (x86/urgent is based on -rc7 and that contains them) as urgent fixes and the current x86/urgent branch which contains two more urgent fixes, so that the bigger FPU rework can base off ontop. Signed-off-by: Borislav Petkov <bp@suse.de>
2021-06-23Merge series "ASoC: tlv320aic32x4: Add support for TAS2505" from Claudius ↵Mark Brown
Heine <ch@denx.de>: Hi, this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver. kind regards, Claudius Changes from v1: - clarified commit message of first patch, which add the type value to the struct - removed unnecessary code to put and get speaker volume - removed 'Gain' from 'HP Driver Playback Volume' control - fixed rebase issues Claudius Heine (3): ASoC: tlv320aic32x4: add type to device private data struct ASoC: tlv320aic32x4: add support for TAS2505 ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible .../bindings/sound/tlv320aic32x4.txt | 1 + sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++- sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++- sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++- sound/soc/codecs/tlv320aic32x4.h | 10 ++ 5 files changed, 186 insertions(+), 9 deletions(-) base-commit: 70585216fe7730d9fb5453d3e2804e149d0fe201 -- 2.32.0
2021-06-23iommu/arm-smmu-qcom: Add stall supportRob Clark
Add, via the adreno-smmu-priv interface, a way for the GPU to request the SMMU to stall translation on faults, and then later resume the translation, either retrying or terminating the current translation. This will be used on the GPU side to "freeze" the GPU while we snapshot useful state for devcoredump. Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210610214431.539029-5-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault infoJordan Crouse
Add a callback in adreno-smmu-priv to read interesting SMMU registers to provide an opportunity for a richer debug experience in the GPU driver. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210610214431.539029-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: deprecate MSM_BO_UNCACHED (map as writecombine instead)Jonathan Marek
There shouldn't be any reason to ever use uncached over writecombine, so just use writecombine for MSM_BO_UNCACHED. Note: userspace never used MSM_BO_UNCACHED anyway Signed-off-by: Jonathan Marek <jonathan@marek.ca> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> Link: https://lore.kernel.org/r/20210423190833.25319-6-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: add MSM_BO_CACHED_COHERENTJonathan Marek
Add a new cache mode for creating coherent host-cached BOs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Link: https://lore.kernel.org/r/20210423190833.25319-5-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23Merge branch 'topic/ppc-kvm' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into HEAD - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: allow advertising vendor-specific capabilitiesJohannes Berg
There may be cases where vendor-specific elements need to be used over the air. Rather than have driver or firmware add them and possibly cause problems that way, add them to the iftype-data band capabilities. This way we can advertise to userspace first, and use them in mac80211 next. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: add cfg80211_any_usable_channels()Johannes Berg
This helper function checks if there are any usable channels on any of the given bands with the given properties (as expressed by disallowed channel flags). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.2b613addaa85.Idaf8b859089490537878a7de5c7453a873a3f638@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: remove ieee80211_get_he_sta_cap()Johannes Berg
This function turned out to be too easy to misuse since it doesn't consider the interface type. Remove it now that we no longer use it in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.8c9c72f914b0.I68e9c0626dc77a0f67f238a05ae16a0b77b09895@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23ieee80211: add defines for HE PHY cap byte 10Johannes Berg
One bit out of the previously completely reserved byte 10 in the PHY capabilities is used since 802.11ax D7.0, add a new define for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c026feb3873d.I380f52a05ddb4153bc77ff7f276a3484819f69b2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23nl80211/cfg80211: add BSS color to NDP ranging parametersAvraham Stern
In NDP ranging, the initiator need to set the BSS color in the NDP to the BSS color of the responder. Add the BSS color as a parameter for NDP ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f097a6144b59.I27dec8b994df52e691925ea61be4dd4fa6d396c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add to bss_conf if broadcast TWT is supportedShaul Triebitz
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23ieee80211: define timing measurement in extended capabilities IEKrishnanand Prabhu
Define the bit used for timing measurement support in extended capabilities IE, used for time synchronization. Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.b75f40765538.I92b50e43e29272c97d17ed5f37f216f4caf0f205@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23ieee80211: add the value for Category '6' in "rtw_ieee80211_category"Christophe JAILLET
Preparation work for removing the "enum rtw_ieee80211_category" in "drivers/staging/rtl8188eu/include/ieee80211.h" and "drivers/staging/rtl8723bs/include/ieee80211.h". This enum is similar to "enum ieee80211_category" from "include/linux/ieee80211.h". However it defines the value '6' as RTW_WLAN_CATEGORY_FT. So add a corresponding value in "ieee80211_category" Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/66be0187869bd7dae1c0b0785a32db695ee9872e.1624108556.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: move A-MPDU session check from minstrel_ht to mac80211Felix Fietkau
This avoids calling back into tx handlers from within the rate control module. Preparation for deferring rate control until tx dequeue Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210617163113.75815-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: expose the rfkill device to the low level driverEmmanuel Grumbach
This will allow the low level driver to query the rfkill state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210616202826.9833-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add ieee80211_is_tx_data helper functionPhilipp Borgers
Add a helper function that checks if a frame is a data frame. Frames with hardware encapsulation enabled are data frames. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210519122019.92359-2-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23cfg80211: remove CFG80211_MAX_NUM_DIFFERENT_CHANNELSJohannes Berg
We no longer need to put any limits here, hardware will and mac80211-hwsim can do whatever it likes. The reason we had this was some accounting code (still mentioned in the comment) but that code was deleted in commit c781944b71f8 ("cfg80211: Remove unused cfg80211_can_use_iftype_chan()"). Link: https://lore.kernel.org/r/20210506221159.d1d61db1d31c.Iac4da68d54b9f1fdc18a03586bbe06aeb9515425@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23Merge tag 'phy-for-5.14_v2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-23f2fs: compress: add compress_inode to cache compressed blocksChao Yu
Support to use address space of inner inode to cache compressed block, in order to improve cache hit ratio of random read. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-06-23f2fs: introduce FI_COMPRESS_RELEASED instead of using IMMUTABLE bitJaegeuk Kim
Once we release compressed blocks, we used to set IMMUTABLE bit. But it turned out it disallows every fs operations which we don't need for compression. Let's just prevent writing data only. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-06-23Backmerge tag 'v5.13-rc7' into drm-nextDave Airlie
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply, and to bake in the conflicts so far.
2021-06-22ext4: add discard/zeroout flags to journal flushLeah Rumancik
Add a flags argument to jbd2_journal_flush to enable discarding or zero-filling the journal blocks while flushing the journal. Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-06-22net/xfrm: Add inner_ipproto into sec_pathHuy Nguyen
The inner_ipproto saves the inner IP protocol of the plain text packet. This allows vendor's IPsec feature making offload decision at skb's features_check and configuring hardware at ndo_start_xmit. For example, ConnectX6-DX IPsec device needs the plaintext's IP protocol to support partial checksum offload on VXLAN/GENEVE packet over IPsec transport mode tunnel. Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Huy Nguyen <huyn@nvidia.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-22mptcp: add allow_join_id0 in mptcp_out_optionsGeliang Tang
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit, labeled "C" of the MP_CAPABLE option. Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge tag 'icc-5.14-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.14 Here are changes for the 5.14-rc1 merge window consisting of interconnect driver updates. Driver changes: - New driver for SC7280 platforms. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Add SC7280 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7280 DT bindings
2021-06-22sctp: process sctp over udp icmp err on sctp sideXin Long
Previously, sctp over udp was using udp tunnel's icmp err process, which only does sk lookup on sctp side. However for sctp's icmp error process, there are more things to do, like syncing assoc pmtu/retransmit packets for toobig type err, and starting proto_unreach_timer for unreach type err etc. Now after adding PLPMTUD, which also requires to process toobig type err on sctp side. This patch is to process icmp err on sctp side by parsing the type/code/info in .encap_err_lookup and call sctp's icmp processing functions. Note as the 'redirect' err process needs to know the outer ip(v6) header's, we have to leave it to udp(v6)_err to handle it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when a probe succeeds on HB ACK recv pathXin Long
As described in rfc8899#section-5.2, when a probe succeeds, there might be the following state transitions: - Base -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_BIG_STEP, - Error -> Search, occurs when probe succeeds with BASE_PLPMTU, pl.pmtu is changed from SCTP_MIN_PLPMTU to SCTP_BASE_PLPMTU, pl.probe_size increases by SCTP_PL_BIG_STEP. - Search -> Search Complete, occurs when probe succeeds with the probe size SCTP_MAX_PLPMTU less than pl.probe_high, pl.pmtu is not changing, but update *pathmtu* with it, pl.probe_size is set back to pl.pmtu to double check it. - Search Complete -> Search, occurs when probe succeeds with the probe size equal to pl.pmtu, pl.pmtu is not changing, pl.probe_size increases by SCTP_PL_MIN_STEP. So search process can be described as: 1. When it just enters 'Search' state, *pathmtu* is not updated with pl.pmtu, and probe_size increases by a big step (SCTP_PL_BIG_STEP) each round. 2. Until pl.probe_high is set when a probe fails, and probe_size decreases back to pl.pmtu, as described in the last patch. 3. When the probe with the new size succeeds, probe_size changes to increase by a small step (SCTP_PL_MIN_STEP) due to pl.probe_high is set. 4. Until probe_size is next to pl.probe_high, the searching finishes and it goes to 'Complete' state and updates *pathmtu* with pl.pmtu, and then probe_size is set to pl.pmtu to confirm by once more probe. 5. This probe occurs after "30 * probe_inteval", a much longer time than that in Search state. Once it is done it goes to 'Search' state again with probe_size increased by SCTP_PL_MIN_STEP. As we can see above, during the searching, pl.pmtu changes while *pathmtu* doesn't. *pathmtu* is only updated when the search finishes by which it gets an optimal value for it. A big step is used at the beginning until it gets close to the optimal value, then it changes to a small step until it has this optimal value. The small step is also used in 'Complete' until it goes to 'Search' state again and the probe with 'pmtu + the small step' succeeds, which means a higher size could be used. Then probe_size changes to increase by a big step again until it gets close to the next optimal value. Note that anytime when black hole is detected, it goes directly to 'Base' state with pl.pmtu set to SCTP_BASE_PLPMTU, as described in the last patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send pathXin Long
The state transition is described in rfc8899#section-5.2, PROBE_COUNT == MAX_PROBES means the probe fails for MAX times, and the state transition includes: - Base -> Error, occurs when BASE_PLPMTU Confirmation Fails, pl.pmtu is set to SCTP_MIN_PLPMTU, probe_size is still SCTP_BASE_PLPMTU; - Search -> Base, occurs when Black Hole Detected, pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; - Search Complete -> Base, occurs when Black Hole Detected pl.pmtu is set to SCTP_BASE_PLPMTU, probe_size is set back to SCTP_BASE_PLPMTU; Note a black hole is encountered when a sender is unaware that packets are not being delivered to the destination endpoint. So it includes the probe failures with equal probe_size to pl.pmtu, and definitely not include that with greater probe_size than pl.pmtu. The later one is the normal probe failure where probe_size should decrease back to pl.pmtu and pl.probe_high is set. pl.probe_high would be used on HB ACK recv path in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: do the basic send and recv for PLPMTUD probeXin Long
This patch does exactly what rfc8899#section-6.2.1.2 says: The SCTP sender needs to be able to determine the total size of a probe packet. The HEARTBEAT chunk could carry a Heartbeat Information parameter that includes, besides the information suggested in [RFC4960], the probe size to help an implementation associate a HEARTBEAT ACK with the size of probe that was sent. The sender could also use other methods, such as sending a nonce and verifying the information returned also contains the corresponding nonce. The length of the PAD chunk is computed by reducing the probing size by the size of the SCTP common header and the HEARTBEAT chunk. Note that HB ACK chunk will carry back whatever HB chunk carried, including the probe_size we put it in; We also check hbinfo->probe_size in the HB ACK against link->pl.probe_size to validate this HB ACK chunk. v1->v2: - Remove the unused 'sp' and add static for sctp_packet_bundle_pad(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add the probe timer in transport for PLPMTUDXin Long
There are 3 timers described in rfc8899#section-5.1.1: PROBE_TIMER, PMTU_RAISE_TIMER, CONFIRMATION_TIMER This patches adds a 'probe_timer' in transport, and it works as either PROBE_TIMER or PMTU_RAISE_TIMER. At most time, it works as PROBE_TIMER and expires every a 'probe_interval' time to send the HB probe packet. When transport pl enters COMPLETE state, it works as PMTU_RAISE_TIMER and expires in 'probe_interval * 30' time to go back to SEARCH state and do searching again. SCTP HB is an acknowledged packet, CONFIRMATION_TIMER is not needed. The timer will start when transport pl enters BASE state and stop when it enters DISABLED state. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add the constants/variables and states and some APIs for transportXin Long
These are 4 constants described in rfc8899#section-5.1.2: MAX_PROBES, MIN_PLPMTU, MAX_PLPMTU, BASE_PLPMTU; And 2 variables described in rfc8899#section-5.1.3: PROBED_SIZE, PROBE_COUNT; And 5 states described in rfc8899#section-5.2: DISABLED, BASE, SEARCH, SEARCH_COMPLETE, ERROR; And these 4 APIs are used to reset/update PLPMTUD, check if PLPMTUD is enabled, and calculate the additional headers length for a transport. Note the member 'probe_high' in transport will be set to the probe size when a probe fails with this probe size in the next patches. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transportXin Long
With this socket option, users can change probe_interval for a transport, asoc or sock after it's created. Note that if the change is for an asoc, also apply the change to each transport in this asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add probe_interval in sysctl and sock/asoc/transportXin Long
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add pad chunk and its make function and event tableXin Long
This chunk is defined in rfc4820#section-3, and used to pad an SCTP packet. The receiver must discard this chunk and continue processing the rest of the chunks in the packet. Add it now, as it will be bundled with a heartbeat chunk to probe pmtu in the following patches. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge branch 'mlx5_realtime_ts' into rdma.git for-nextJason Gunthorpe
Aharon Landau says: ==================== In case device supports only real-time timestamp, the kernel will fail to create QP despite rdma-core requested such timestamp type. It is because device returns free-running timestamp, and the conversion from free-running to real-time is performed in the user space. This series fixes it, by returning real-time timestamp. ==================== * mlx5_realtime_ts: RDMA/mlx5: Support real-time timestamp directly from the device RDMA/mlx5: Refactor get_ts_format functions to simplify code Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22compiler_attributes.h: cleanups for GCC 4.9+Nick Desaulniers
Since commit 6ec4476ac825 ("Raise gcc version requirement to 4.9") we no longer support building the kernel with GCC 4.8; drop the preprocess checks for __GNUC_MINOR__ version. It's implied that if __GNUC_MAJOR__ is 4, then the only supported version of __GNUC_MINOR__ left is 9. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210621231822.2848305-3-ndesaulniers@google.com
2021-06-22compiler_attributes.h: define __no_profile, add to noinstrNick Desaulniers
noinstr implies that we would like the compiler to avoid instrumenting a function. Add support for the compiler attribute no_profile_instrument_function to compiler_attributes.h, then add __no_profile to the definition of noinstr. Link: https://lore.kernel.org/lkml/20210614162018.GD68749@worktop.programming.kicks-ass.net/ Link: https://reviews.llvm.org/D104257 Link: https://reviews.llvm.org/D104475 Link: https://reviews.llvm.org/D104658 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80223 Reviewed-by: Fangrui Song <maskray@google.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210621231822.2848305-2-ndesaulniers@google.com
2021-06-22Merge tag 'v5.13-rc7' into rdma.git for-nextJason Gunthorpe
Linux 5.13-rc7 Needed for dependencies in following patches. Merge conflict in rxe_cmop.c resolved by compining both patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22ethtool: Use kernel data types for internal EEPROM structIdo Schimmel
The struct is not visible to user space and therefore should not use the user visible data types. Instead, use internal data types like other structures in the file. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Document correct attribute typeIdo Schimmel
'ETHTOOL_A_MODULE_EEPROM_DATA' is a binary attribute, not a nested one. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22RDMA/mlx5: Support real-time timestamp directly from the deviceAharon Landau
Currently, if the user asks for a real-time timestamp, the device will return a free-running one, and the timestamp will be translated to real-time in the user-space. When the device supports only real-time timestamp and not free-running, the creation of the QP will fail even though the user needs supported the real-time one. To prevent this, we will return the real-time timestamp directly from the device. Link: https://lore.kernel.org/r/c6cfc8e6f038575c5c2de6505830f7e74e4de80d.1623829775.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22RDMA/core: Use flexible array for mad dataKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. Without a flexible array, this looks like an attempt to perform a memcpy() read beyond the end of the packet->mad.data array: drivers/infiniband/core/user_mad.c: memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR); Switch from [0] to [] to use the appropriately handled type for trailing bytes. Link: https://lore.kernel.org/r/20210616202615.1247242-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22wwan: core: add WWAN common private data for netdevSergey Ryazanov
The WWAN core not only multiplex the netdev configuration data, but process it too, and needs some space to store its private data associated with the netdev. Add a structure to keep common WWAN core data. The structure will be stored inside the netdev private data before WWAN driver private data and have a field to make it easier to access the driver data. Also add a helper function that simplifies drivers access to their data. At the moment we use the common WWAN private data to store the WWAN data link (channel) id at the time the link is created, and report it back to user using the .fill_info() RTNL callback. This should help the user to be aware which network interface is bound to which WWAN device data channel. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: support default netdev creationSergey Ryazanov
Most, if not each WWAN device driver will create a netdev for the default data channel. Therefore, add an option for the WWAN netdev ops registration function to create a default netdev for the WWAN device. A WWAN device driver should pass a default data channel link id to the ops registering function to request the creation of a default netdev, or a special value WWAN_NO_DEFAULT_LINK to inform the WWAN core that the default netdev should not be created. For now, only wwan_hwsim utilize the default link creation option. Other drivers will be reworked next. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: no more hold netdev ops owning moduleSergey Ryazanov
The WWAN netdev ops owner holding was used to protect from the unexpected memory disappear. This approach causes a dependency cycle (driver -> core -> driver) and effectively prevents a WWAN driver unloading. E.g. WWAN hwsim could not be unloaded until all simulated devices are removed: ~# modprobe wwan_hwsim devices=2 ~# lsmod | grep wwan wwan_hwsim 16384 2 wwan 20480 1 wwan_hwsim ~# rmmod wwan_hwsim rmmod: ERROR: Module wwan_hwsim is in use ~# echo > /sys/kernel/debug/wwan_hwsim/hwsim0/destroy ~# echo > /sys/kernel/debug/wwan_hwsim/hwsim1/destroy ~# lsmod | grep wwan wwan_hwsim 16384 0 wwan 20480 1 wwan_hwsim ~# rmmod wwan_hwsim For a real device driver this will cause an inability to unload module until a served device is physically detached. Since the last commit we are removing all child netdev(s) when a driver unregister the netdev ops. This allows us to permit the driver unloading, since any sane driver will call ops unregistering on a device deinitialization. So, remove the holding of an ops owner to make it easier to unload a driver module. The owner field has also beed removed from the ops structure as there are no more users of this field. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: mdiobus: Introduce fwnode_mdbiobus_register()Marcin Wojtas
This patch introduces a new helper function that wraps acpi_/of_ mdiobus_register() and allows its usage via common fwnode_ interface. Fall back to raw mdiobus_register() in case CONFIG_FWNODE_MDIO is not enabled, in order to satisfy compatibility in all future user drivers. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22clocksource: Provide kernel module to test clocksource watchdogPaul E. McKenney
When the clocksource watchdog marks a clock as unstable, this might be due to that clock being unstable or it might be due to delays that happen to occur between the reads of the two clocks. It would be good to have a way of testing the clocksource watchdog's ability to distinguish between these two causes of clock skew and instability. Therefore, provide a new clocksource-wdtest module selected by a new TEST_CLOCKSOURCE_WATCHDOG Kconfig option. This module has a single module parameter named "holdoff" that provides the number of seconds of delay before testing should start, which defaults to zero when built as a module and to 10 seconds when built directly into the kernel. Very large systems that boot slowly may need to increase the value of this module parameter. This module uses hand-crafted clocksource structures to do its testing, thus avoiding messing up timing for the rest of the kernel and for user applications. This module first verifies that the ->uncertainty_margin field of the clocksource structures are set sanely. It then tests the delay-detection capability of the clocksource watchdog, increasing the number of consecutive delays injected, first provoking console messages complaining about the delays and finally forcing a clock-skew event. Unexpected test results cause at least one WARN_ON_ONCE() console splat. If there are no splats, the test has passed. Finally, it fuzzes the value returned from a clocksource to test the clocksource watchdog's ability to detect time skew. This module checks the state of its clocksource after each test, and uses WARN_ON_ONCE() to emit a console splat if there are any failures. This should enable all types of test frameworks to detect any such failures. This facility is intended for diagnostic use only, and should be avoided on production systems. Reported-by: Chris Mason <clm@fb.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20210527190124.440372-5-paulmck@kernel.org
generated by cgit (git 2.34.1) at 2025-09-14 10:23:19 +0000