| Age | Commit message (Collapse) | Author |
|---|
|
Fix a typo in comments: wether -> whether.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241010091355.8271-1-algonell@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With KASAN and PREEMPT_RT enabled, calling task_work_add() in
task_tick_mm_cid() may cause the following splat.
[ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe
[ 63.696416] preempt_count: 10001, expected: 0
[ 63.696416] RCU nest depth: 1, expected: 1
This problem is caused by the following call trace.
sched_tick() [ acquire rq->__lock ]
-> task_tick_mm_cid()
-> task_work_add()
-> __kasan_record_aux_stack()
-> kasan_save_stack()
-> stack_depot_save_flags()
-> alloc_pages_mpol_noprof()
-> __alloc_pages_noprof()
-> get_page_from_freelist()
-> rmqueue()
-> rmqueue_pcplist()
-> __rmqueue_pcplist()
-> rmqueue_bulk()
-> rt_spin_lock()
The rq lock is a raw_spinlock_t. We can't sleep while holding
it. IOW, we can't call alloc_pages() in stack_depot_save_flags().
The task_tick_mm_cid() function with its task_work_add() call was
introduced by commit 223baf9d17f2 ("sched: Fix performance regression
introduced by mm_cid") in v6.4 kernel.
Fortunately, there is a kasan_record_aux_stack_noalloc() variant that
calls stack_depot_save_flags() while not allowing it to allocate
new pages. To allow task_tick_mm_cid() to use task_work without
page allocation, a new TWAF_NO_ALLOC flag is added to enable calling
kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack()
if set. The task_tick_mm_cid() function is modified to add this new flag.
The possible downside is the missing stack trace in a KASAN report due
to new page allocation required when task_work_add_noallloc() is called
which should be rare.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241010014432.194742-1-longman@redhat.com
|
|
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cancelling an rx command is signalled using bit 14 of the rx DMA status
register and not bit 11.
This bit is currently unused, but this error becomes apparent, for
example, when tracing the status register when closing the port.
Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241009145110.16847-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit ebd2c8f6d2ec ("serial: kill off uart_info") has
removed uart_info, the uart_info declaration looks lonely,
let it go.
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240920053423.1373354-1-siyanteng@cqsoftware.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Setting the end address for a resource with a given size lacks a helper and
is therefore coded manually unlike the getter side which has a helper for
resource size calculation. Also, almost all callsites that calculate the
end address for a resource also set the start address right before it like
this:
res->start = start_addr;
res->end = res->start + size - 1;
Add resource_set_range(res, start_addr, size) that sets the start address
and calculates the end address to simplify this often repeated fragment.
Also add resource_set_size() for the cases where setting the start address
of the resource is not necessary but mention in its kerneldoc that
resource_set_range() is preferred when setting both addresses.
Link: https://lore.kernel.org/r/20240614100606.15830-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add drm_line_printer (Michal)
Driver Changes:
- Fix an UAF (Matt Auld)
- Sanity check compression and coherency mode (Matt Auld)
- Some PIC-ID work (Jani)
- Use IS_ENABLED() instead of defined() on config options.
- gt powergating work (Riana)
- Suppress missing out ter rpm protection warning (Rodrigo)
- Fix a vm leak (Dafna)
- Clean up and update 'has_flat_ccs' handling (Lucas)
- Fix arg to pci_iomap (Lucas)
- Mark reserved engines in shapshot (Lucas)
- Don't keep stale pointer (Michal)
- Fix build warning with CONFIG_PM=n (Arnd)
- Add a xe_bo subtest for shrinking / swapping (Thomas)
- Add a warkaround (Tejas)
- Some display PM work (Maarten)
- Enable Xe2 + PES disaggregation (Ashutosh)
- Large xe_mmio rework / cleanup (Matt Roper)
- A couple of fixes / cleanups in the xe client code (Matt Auld)
- Fix page-fault handling on closed VMs (Matt Brost)
- Fix overflow in OA batch buffer (José)
- Style fixes (Lucas, Jiapeng, Nitin)
- Fixes and new development around SRIOV (Michal)
- Use devm_add_action_or_reset() in gt code (He)
- Fix CCS offset calculation (Matt Auld)
- Remove i915_drv.h include (Rodrigo)
- Restore PCI state on resume (Rodrigo)
- Fix DSB buffer coherency / Revert DSB disabling (Maarten / Animesh)
- Convert USM lock to rwsem (Matt Brost)
- Defer gt-mmio intialization (Matt Roper)
- meemirq changes (Ilia)
- Move some PVC related code out of xe-for-CI and to the driver (Rodrigo / Jani)
- Use a helper for ASID->VM lookup (Matt Brost)
- Add new PCI id for ARL (Dnyaneshwar)
- Use Xe2_LPM steering tables for Xe2_HPM (Gustavo)
- Performance tuning work for media GT and L3 cache flushing (Gustavo)
- Clean up VM- and exec queue file lock usage (Matt Brost)
- GuC locking fix (Matt Auld)
- Fix UAF around queue destruction (Matt Auld)
- Move IRQ-related registers to dedicated header (Matt Roper)
- Resume TDR after GT reset (Matt Brost)
- Move xa_alloc to prevent UAF (Matt Auld)
- Fix OA stream close (José)
- Remove unused i915_gpu_error.h (Jani)
- Prevent null pointer access in xe_migrate_copy (Zhanjun)
- Fix memory leak when aborting binds (Matt Brost)
- Prevent UAF in send_recv() (Matt Auld)
- Fix xa_store() error checking (Matt Auld)
- drop irq disabling around xa_erase in guc code (Matt Auld)
- Use fault injection infrastructure to find issues as probe time (Francois)
- Fix a workaround implementation. (Vinay)
- Mark wedged_mode debugfs writable (Matt Roper)
- Fix for prviewous memirq work (Michal)
- More SRIOV work (Michal)
- Devcoredump work (John)
- GuC logging + devcoredump support (John)
- Don't report L3 bank availability on PTL (Shekhar)
- Replicate Xe2 PAT settings on Xe2 (Matt Roper)
- Define Xe3 feature flags (Haridhar)
- Reuse Xe2 MOCS table on on PTL (Haridhar)
- Add PTL platform definition (Haridhar)
- Add MCR steering for Xe3 (Matt)
- More work around GuC capture for devcoredump (Zhanjun)
- Improve cache flushing behaviour on bmg (Matt Auld)
- Fix shrinker test compiler warnings on 32-bit (Thomas)
- Initial set of workarounds for Xe3 (Gustavo)
- Extend workaround for xe2lpg (Aradhya)
- Fix unbalanced rpm put x 2 (Matt Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZwekBwAKCRC4FpNVCsYG
# v32oAQDnIKVwjZecI1V3oUsy2ZE3TKWx8HH4FweT6S5L6tqZwQD/b0vkeA3UaojO
# 5FIkPEqyHFbrj+Sw7bLonLb3LHv4WAE=
# =FtY6
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Oct 2024 19:53:11 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_gt_mcr.c
# drivers/gpu/drm/xe/xe_tuning.c
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zwekwrak12c5SSgo@fedora
|
|
The user thresholds mechanism is a way to have the userspace to tell
the thermal framework to send a notification when a temperature limit
is crossed. There is no id, no hysteresis, just the temperature and
the direction of the limit crossing. That means we can be notified
when a threshold is crossed the way up only, or the way down only or
both ways. That allows to create hysteresis values if it is needed.
A threshold can be added, deleted or flushed. The latter means all
thresholds belonging to a thermal zone will be deleted.
When a threshold is added:
- if the same threshold (temperature and direction) exists, an error
is returned
- if a threshold is specified with the same temperature but a
different direction, the specified direction is added
- if there is no threshold with the same temperature then it is
created
When a threshold is deleted:
- if the same threshold (temperature and direction) exists, it is
deleted
- if a threshold is specified with the same temperature but a
different direction, the specified direction is removed
- if there is no threshold with the same temperature, then an error
is returned
When the threshold are flushed:
- All thresholds related to a thermal zone are deleted
When a threshold is crossed:
- the userspace does not need to know which threshold(s) have been
crossed, it will be notified with the current temperature and the
previous temperature
- if multiple thresholds have been crossed between two updates only
one notification will be send to the userspace, it is pointless to
send a notification per thresholds crossed as the userspace can
handle that easily when it has the temperature delta information
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org
[ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The documentation says CONFIG_FUNCTION_ERROR_INJECTION is supported only
on x86. This was presumably true at the time of writing, but it's now
supported on many other architectures too. Drop this statement, since
it's not correct anymore and it fits better in other documentation
anyway.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Link: https://lore.kernel.org/r/20241010193301.995909-1-martin.kelly@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc3).
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
UAPI Changes:
- Add drm fdinfo support to panthor, and add sysfs knob to toggle.
Cross-subsystem Changes:
- Convert fbdev drivers to use backlight power constants.
- Some small dma-fence fixes.
- Some kernel-doc fixes.
Core Changes:
- Small drm client fixes.
- Document requirements that you need to file a bug before marking a test as flaky.
- Remove swapped and pinned bo's from TTM lru list.
Driver Changes:
- Assorted small fixes to panel/elida-kd35t133, nouveau, vc4, imx.
- Fix some bridges to drop cached edids on power off.
- Add Jenson BL-JT60050-01A, Samsung s6e3ha8 & AMS639RQ08 panels.
- Make 180° rotation work on ilitek-ili9881c, even for already-rotated
panels.
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/panthor/panthor_drv.c
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8dc111ca-d20c-4e0d-856e-c12d208cbf2a@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit"
* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
MAINTAINERS: Add headers and mailing list to UDP section
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
slip: make slhc_remember() more robust against malicious packets
net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
ppp: fix ppp_async_encode() illegal access
docs: netdev: document guidance on cleanup patches
phonet: Handle error of rtnl_register_module().
mpls: Handle error of rtnl_register_module().
mctp: Handle error of rtnl_register_module().
bridge: Handle error of rtnl_register_module().
vxlan: Handle error of rtnl_register_module().
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
net: do not delay dst_entries_add() in dst_release()
mptcp: pm: do not remove closing subflows
mptcp: fallback when MPTCP opts are dropped after 1st data
tcp: fix mptcp DSS corruption due to large pmtu xmit
mptcp: handle consistently DSS corruption
net: netconsole: fix wrong warning
net: dsa: refuse cross-chip mirroring operations
net: fec: don't save PTP state if PTP is unsupported
...
|
|
clocksource_change_rating() has been unused since 2017's commit
63ed4e0c67df ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code")
Remove it.
__clocksource_change_rating now only has one use which is ifdef'd.
Move it into the ifdef'd section.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010135446.213098-1-linux@treblig.org
|
|
Simplify return address printing in the function graph tracer by removing
fgraph_extras. Since this feature is only used by the function graph
tracer and the feature flags can directly accessible from the function
graph tracer, fgraph_extras can be removed from the fgraph callback.
Cc: Donglin Peng <dolinux.peng@gmail.com>
Link: https://lore.kernel.org/172857234900.270774.15378354017601069781.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The `index` argument to bpf_loop() is threaded as an u64.
This lead in a subtle verifier denial where clang cloned the argument
in another register[1].
[1] https://github.com/systemd/systemd/pull/34650#issuecomment-2401092895
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20241010035652.17830-1-technoboy85@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Paolo Abeni says:
====================
net: introduce TX H/W shaping API
We have a plurality of shaping-related drivers API, but none flexible
enough to meet existing demand from vendors[1].
This series introduces new device APIs to configure in a flexible way
TX H/W shaping. The new functionalities are exposed via a newly
defined generic netlink interface and include introspection
capabilities. Some self-tests are included, on top of a dummy
netdevsim implementation. Finally a basic implementation for the iavf
driver is provided.
Some usage examples:
* Configure shaping on a given queue:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \
--do set --json '{"ifindex": '$IFINDEX',
"shaper": {"handle":
{"scope": "queue", "id":'$QUEUEID'},
"bw-max": 2000000}}'
* Container B/W sharing
The orchestration infrastructure wants to group the
container-related queues under a RR scheduling and limit the aggregate
bandwidth:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID2'},
"weight": '$W2'}],
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope":"node"},
"bw-max": 10000000}'
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 0}}
Q1 \
\
Q2 -- node 0 ------- netdev
/ (bw-max: 10M)
Q3 /
* Delegation
A containers wants to limit the aggregate B/W bandwidth of 2 of the 3
queues it owns - the starting configuration is the one from the
previous point:
SPEC=Documentation/netlink/specs/net_shaper.yaml
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID2'},
"weight": '$W2'}],
"handle": {"scope": "node"},
"bw-max": 5000000 }'
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 1}}
Q1 -- node 1 --------\
/ (bw-max: 5M) \
Q2 / node 0 ------- netdev
/(bw-max: 10M)
Q3 ------------------/
In a group operation, when prior to the op itself, the leaves have
different parents, the user must specify the parent handle for the
group. I.e., starting from the previous config:
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope": "node"},
"bw-max": 3000000 }'
Netlink error: Invalid argument
nl_len = 96 (80) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'All the leaves shapers must have the same old parent'}
./tools/net/ynl/cli.py --spec $SPEC \
--do group --json '{"ifindex": '$IFINDEX',
"leaves": [
{"handle": {"scope": "queue", "id":'$QID1'},
"weight": '$W1'},
{"handle": {"scope": "queue", "id":'$QID3'},
"weight": '$W3'}],
"handle": {"scope": "node"},
"parent": {"scope": "node", "id": 1},
"bw-max": 3000000 }
{'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 2}}
Q1 -- node 2 ---
/(bw-max:3M)\
Q3 / \
---- node 1 \
/ (bw-max: 5M)\
Q2 node 0 ------- netdev
(bw-max: 10M)
* Cleanup:
Still starting from config 1To delete a single queue shaper
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID3'}}'
Q1 -- node 2 ---
(bw-max:3M)\
\
---- node 1 \
/ (bw-max: 5M)\
Q2 node 0 ------- netdev
(bw-max: 10M)
Deleting a node shaper relinks all its leaves to the node's parent:
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id":2}}'
Q1 ---\
\
node 1----- \
/ (bw-max: 5M)\
Q2----/ node 0 ------- netdev
(bw-max: 10M)
Deleting the last shaper under a node shaper deletes the node, too:
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID1'}}'
./tools/net/ynl/cli.py --spec $SPEC --do delete --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "queue", "id":'$QID2'}}'
./tools/net/ynl/cli.py --spec $SPEC --do get --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id": 1}}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.handle'}
Such delete recurses on parents that are left over with no leaves:
./tools/net/ynl/cli.py --spec $SPEC --do get --json \
'{"ifindex": '$IFINDEX',
"handle": {"scope": "node", "id": 0}}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.handle'}
v8: https://lore.kernel.org/cover.1727704215.git.pabeni@redhat.com
v7: https://lore.kernel.org/cover.1725919039.git.pabeni@redhat.com
v6: https://lore.kernel.org/cover.1725457317.git.pabeni@redhat.com
v5: https://lore.kernel.org/cover.1724944116.git.pabeni@redhat.com
v4: https://lore.kernel.org/cover.1724165948.git.pabeni@redhat.com
v3: https://lore.kernel.org/cover.1722357745.git.pabeni@redhat.com
RFC v2: https://lore.kernel.org/cover.1721851988.git.pabeni@redhat.com
RFC v1: https://lore.kernel.org/cover.1719518113.git.pabeni@redhat.com
====================
Link: https://patch.msgid.link/cover.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds new virtchnl opcodes and structures for rate limit
and quanta size configuration, which include:
1. VIRTCHNL_OP_CONFIG_QUEUE_BW, to configure max bandwidth for each
VF per queue.
2. VIRTCHNL_OP_CONFIG_QUANTA, to configure quanta size per queue.
3. VIRTCHNL_OP_GET_QOS_CAPS, VF queries current QoS configuration, such
as enabled TCs, arbiter type, up2tc and bandwidth of VSI node. The
configuration is previously set by DCB and PF, and now is the potential
QoS capability of VF. VF can take it as reference to configure queue TC
mapping.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/839002f7bd6f63b985a060a51b079f6e6dbbe237.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the user-space to fine-grain query the shaping features
supported by the NIC on each domain.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/3ddd10e450e3fe7d4b944c0d0b886d4483529ee6.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the basic infrastructure to implement the net-shaper
core functionality. Each network devices carries a net-shaper cache,
the NL get() operation fetches the data from such cache.
The cache is initially empty, will be fill by the set()/group()
operation implemented later and is destroyed at device cleanup time.
The net_shaper_fill_handle(), net_shaper_ctx_init(), and
net_shaper_generic_pre() implementations handle generic index type
attributes, despite the current caller always pass a constant value
to avoid more noise in later patches using them with different
attributes.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ddd10fd645a9367803ad02fca4a5664ea5ace170.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the user-space visible interface to query, configure and delete
network shapers via yaml definition.
Add dummy implementations for the relevant NL callbacks.
set() and delete() operations touch a single shaper creating/updating or
deleting it.
The group() operation creates a shaper's group, nesting multiple input
shapers under the specified output shaper.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/7a33a1ff370bdbcd0cd3f909575c912cd56f41da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows a more uniform implementation of non-dump and dump
operations, and will be used later in the series to avoid some
per-operation allocation.
Additionally rename the NL_ASSERT_DUMP_CTX_FITS macro, to
fit a more extended usage.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/1130cc2896626b84587a2a5f96a5c6829638f4da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 583be982d934 ("mctp: Add device handling and netlink interface")
Fixes: 831119f88781 ("mctp: Add neighbour netlink interface")
Fixes: 06d2f4c583a7 ("mctp: Add netlink route management")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All users of *_opp_attach|detach_genpd(), have been converted to use
dev|devm_pm_domain_attach|detach_list(), hence let's drop it along with its
corresponding exported functions.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-12-ulf.hansson@linaro.org
|
|
In the single PM domain case there is no need for platform code to specify
the index of the corresponding required OPP in DT, as the index must be
zero. This allows us to assign a required dev for the required OPP from
genpd, while attaching a device to its PM domain.
In this way, we can remove some of the genpd specific code in the OPP core
for the single PM domain case. Although, this cleanup is made from a
subsequent change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-7-ulf.hansson@linaro.org
|
|
In the multiple PM domain case we need platform code to specify the index
of the corresponding required OPP in DT for a device, which is what
*_opp_attach_genpd() is there to help us with.
However, attaching a device to its PM domains is in general better done
with dev_pm_domain_attach_list(). To avoid having two different ways to
manage this and to prepare for the removal of *_opp_attach_genpd(), let's
extend dev_pm_domain_attach|detach_list() to manage the required OPPs too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-5-ulf.hansson@linaro.org
|
|
At this point there are no consumer drivers that makes use of
_set_required_devs(), hence it should be straightforward to rework the code
to enable it to better integrate with the PM domain attach procedure.
During attach, one device at the time is being hooked up to its
corresponding PM domain. Therefore, let's update the _set_required_devs()
to align to this behaviour, allowing callers to fill out one required_dev
per call. Subsequent changes starts making use of this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20241002122232.194245-4-ulf.hansson@linaro.org
|
|
After splitting the max5970 into a MFD device clean the remaining
code and drop unused structs.
The struct max5970_data and enum max5970_chip_type aren't used.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://patch.msgid.link/20241002125500.78278-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When v4 topology support was removed, minimal topology ABI version
should have been bumped.
Fixes: fe4a07454256 ("ASoC: Drop soc-topology ABI v4 support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241009081230.304918-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is used for multiple purposes, depending on the scheduling element
created. There are a few helper struct defined a long time ago, but they
are not easy to find in the file and they are about to get new members.
This commit cleans up this area a bit by:
- moving the helper structs closer to where they are relevant.
- defining a helper union to include all of them to help
discoverability.
- making use of it everywhere element_attributes is used.
- using a consistent 'attr' name.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The likely() annotation in l3mdev_master_ifindex_by_index() has been
found to be incorrect 100% of the time in real-world workloads (e.g.,
web servers).
Annotated branches shows the following in these servers:
correct incorrect % Function File Line
0 169053813 100 l3mdev_master_ifindex_by_index l3mdev.h 81
This is happening because l3mdev_master_ifindex_by_index() is called
from __inet_check_established(), which calls
l3mdev_master_ifindex_by_index() passing the socked bounded interface.
l3mdev_master_ifindex_by_index(net, sk->sk_bound_dev_if);
Since most sockets are not going to be bound to a network device,
the likely() is giving the wrong assumption.
Remove the likely() annotation to ensure more accurate branch
prediction.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241008163205.3939629-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Dragan Simic <dsimic@manjaro.org>:
This is a small series that introduces dev_warn_probe() function, which
produces warnings on failed resource acquisitions, and improves error
handling in the probe paths of Rockchip SPI drivers, by using functions
dev_err_probe() and dev_warn_probe() properly in multiple places.
This series also performs a bunch of small, rather trivial code cleanups,
to make the code neater and a bit easier to read.
|
|
|
|
definitions
Add peric1, misc and hsi0/1 clock definitions.
- CMU_PERIC1 for USI, IC2 and I3C
- CMU_MISC for MISC, GIC and OTP
- HSI0 for PCIE
- HSI1 for USB and MMC
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241009042110.2379903-2-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Jeff Layton <jlayton@kernel.org> says:
The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around 1
per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide when to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).
If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
What we need is a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in inode->i_ctime_nsec
as a flag that indicates whether the current timestamps have been
queried via stat() or the like. When it's set, we allow the kernel to
use a fine-grained timestamp iff it's necessary to make the ctime show
a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible for a
file being changed to get a fine-grained timestamp. A file that is
altered just a bit later can then get a coarse-grained one that appears
older than the earlier fine-grained time. This violates timestamp
ordering guarantees.
To remedy this, keep a global monotonic atomic64_t value that acts as a
timestamp floor. When we go to stamp a file, we first get the latter of
the current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it with
that value.
If it has been queried, then first see whether the current coarse time
is later than the existing ctime. If it is, then we accept that value.
If it isn't, then we get a fine-grained time and try to swap that into
the global floor. Whether that succeeds or fails, we take the resulting
floor time, convert it to realtime and try to swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails, since
either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same floor
value as multigrain filesystems).
* patches from https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org:
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Link: https://lore.kernel.org/r/20241002-mgtime-v10-0-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some tracepoints around various multigrain timestamp events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-6-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
An update to the inode ctime typically requires the latest clock
value possible. The exception to this rule is when there is a nfsd write
delegation and the server is proxying timestamps from the client.
When nfsd gets a CB_GETATTR response, update the timestamp value in the
inode to the values that the client is tracking. The client doesn't send
a ctime value (since that's always determined by the exported
filesystem), but it can send a mtime value. In the case where it does,
update the ctime to a value commensurate with that instead of the
current time.
If ATTR_DELEG is set, then use ia_ctime value instead of setting the
timestamp to the current time.
With the addition of delegated timestamps, the server may receive a
request to update only the atime, which doesn't involve a ctime update.
Trust the ATTR_CTIME flag in the update and only update the ctime when
it's set.
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241002-mgtime-v10-5-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The mgtime_floor value is a global variable for tracking the latest
fine-grained timestamp handed out. Because it's a global, track the
number of times that a new floor value is assigned.
Add a new percpu counter to the timekeeping code to track the number of
floor swap events that have occurred. A later patch will add a debugfs
file to display this counter alongside other stats involving multigrain
timestamps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Link: https://lore.kernel.org/all/20241002-mgtime-v10-2-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Multigrain timestamps allow the kernel to use fine-grained timestamps when
an inode's attributes is being actively observed via ->getattr(). With
this support, it's possible for a file to get a fine-grained timestamp, and
another modified after it to get a coarse-grained stamp that is earlier
than the fine-grained time. If this happens then the files can appear to
have been modified in reverse order, which breaks VFS ordering guarantees
[1].
To prevent this, maintain a floor value for multigrain timestamps.
Whenever a fine-grained timestamp is handed out, record it, and when later
coarse-grained stamps are handed out, ensure they are not earlier than that
value. If the coarse-grained timestamp is earlier than the fine-grained
floor, return the floor value instead.
Add a static singleton atomic64_t into timekeeper.c that is used to keep
track of the latest fine-grained time ever handed out. This is tracked as a
monotonic ktime_t value to ensure that it isn't affected by clock
jumps. Because it is updated at different times than the rest of the
timekeeper object, the floor value is managed independently of the
timekeeper via a cmpxchg() operation, and sits on its own cacheline.
Add two new public interfaces:
- ktime_get_coarse_real_ts64_mg() fills a timespec64 with the later of the
coarse-grained clock and the floor time
- ktime_get_real_ts64_mg() gets the fine-grained clock value, and tries
to swap it into the floor. A timespec64 is filled with the result.
The floor value is global and updated via a single try_cmpxchg(). If
that fails then the operation raced with a concurrent update. Any
concurrent update must be later than the existing floor value, so any
racing tasks can accept any resulting floor value without retrying.
[1]: POSIX requires that files be stamped with realtime clock values, and
makes no provision for dealing with backward clock jumps. If a backward
realtime clock jump occurs, then files can appear to have been modified
in reverse order.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # documentation bits
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241002-mgtime-v10-1-d1c4717f5284@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
No one uses inet_addr_lst anymore, so let's remove it.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each IPv4 address could have a lifetime, which is useful for DHCP,
and GC is periodically executed as check_lifetime_work.
check_lifetime() does the actual GC under RTNL.
1. Acquire RTNL
2. Iterate inet_addr_lst
3. Remove IPv4 address if expired
4. Release RTNL
Namespacifying the GC is required for per-netns RTNL, but using the
per-netns hash table will shorten the time on the hash bucket iteration
under RTNL.
Let's add per-netns GC work and use the per-netns hash table.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a prep for per-netns RTNL conversion, we want to namespacify
the IPv4 address hash table and the GC work.
Let's allocate the per-netns IPv4 address hash table to
net->ipv4.inet_addr_lst and link IPv4 addresses into it.
The actual users will be converted later.
Note that the IPv6 address hash table is already namespacified.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241008172906.1326-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several files have "accept*" misspelled as "accpet*" in the comments.
Fix all such occurrences.
Signed-off-by: Alexander Zubkov <green@qrator.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241008162756.22618-2-green@qrator.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to fib_validate_source(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
All callers of fib_validate_source() already have a dscp_t variable to
pass as parameter. We just need to remove the inet_dscp_to_dsfield()
conversions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/08612a4519bc5a3578bb493fbaad82437ebb73dc.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_mc_validate_source(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_mc_validate_source() to consider are:
* ip_route_input_mc() which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* udp_v4_early_demux() which gets the DSCP directly from the IPv4
header and can simply use the ip4h_dscp() helper.
Also, stop including net/inet_dscp.h in udp.c as we don't use any of
its declarations anymore.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c91b2cca04718b7ee6cf5b9c1d5b40507d65a8d4.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_route_use_hint(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Only ip_rcv_finish_core() actually calls ip_route_use_hint(). Use the
ip4h_dscp() helper to get the DSCP from the IPv4 header.
While there, modify the declaration of ip_route_use_hint() in
include/net/route.h so that it matches the prototype of its
implementation in net/ipv4/route.c.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c40994fdf804db7a363d04fdee01bf48dddda676.1728302212.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the lives of __of_overlay_apply_kunit() callers easier by
extracting some of the boiler plate involved in referencing the DT
overlays.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240822002433.1163814-3-sboyd@kernel.org
|
|
Add a test managed version of of_clk_add_hw_provider() that
automatically unregisters the clk_hw provider upon test conclusion.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240822002433.1163814-2-sboyd@kernel.org
|
|
clk_hw_rate_is_protected() was added in 2017's commit
e55a839a7a1c ("clk: add clock protection mechanism to clk core")
but has been unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241009003552.254675-1-linux@treblig.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
