| Age | Commit message (Collapse) | Author |
|---|
|
Preparations for future V4L2_FLAG_MEMORY_NON_CONSISTENT support.
Extend vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory consistency configuration.
An attempt to allocate a buffer with consistency requirements
which don't match queue's consistency model will fail.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
By setting or clearing V4L2_FLAG_MEMORY_NON_CONSISTENT flag
user-space should be able to set or clear queue's NON_CONSISTENT
->dma_attrs. Queue's ->dma_attrs are passed to the underlying
allocator in __vb2_buf_mem_alloc(), so thus user-space is able
to request vb2 buffer's memory to be either consistent (coherent)
or non-consistent.
The patch set also adds a corresponding capability flag:
fill_buf_caps() reports V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
when queue supports user-space cache management hints. Note,
however, that MMAP_CACHE_HINTS capability only valid when the
queue is used for memory MMAP-ed streaming I/O.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Some machine drivers allocate or request resources with
snd_soc_link_init() phase of the card probe. These resources need to
be properly released when removing a card, and this patch suggests a
dual exit() callback.
The exit() is invoked in soc_remove_pcm_runtime(), which is not
completely symmetric with the init() invoked in soc_init_pcm_runtime().
Alternate solutions were considered, e.g. adding a .remove() callback
for the platform driver, but that's not symmetrical at all and would
be difficult to handle if there are more than one dailink implementing
an .init(). We looked also into using .remove_dai_link() callback, but
that would also be imbalanced.
Note that because of the error handling in snd_soc_bind_card(), which
jumps to probe_end, there is no way to guarantee the exit() is invoked
with resources allocated in the init(). Prior to releasing those
resources, implementations of the exit() callback shall check the
resources are valid.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200622154241.29053-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set video buffer cache management flags corresponding to V4L2 cache
flags.
Both ->prepare() and ->finish() cache management hints should be
passed during this stage (buffer preparation), because there is
no other way for user-space to tell V4L2 to avoid ->finish() cache
flush.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Extend vb2_buffer and vb2_queue structs with cache management
members.
V4L2 UAPI already contains two buffer flags which user-space,
supposedly, can use to control buffer cache sync:
- V4L2_BUF_FLAG_NO_CACHE_INVALIDATE
- V4L2_BUF_FLAG_NO_CACHE_CLEAN
None of these, however, do anything at the moment. This patch
set is intended to change it.
Since user-space cache management hints are supposed to be
implemented on a per-buffer basis we need to extend vb2_buffer
struct with two new members ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish, which will store corresponding
user-space hints.
In order to preserve the existing behaviour, user-space cache
managements flags will be handled only by those drivers that
permit user-space cache hints. That's the purpose of vb2_queue
->allow_cache_hints member. Driver must set ->allow_cache_hints
during queue initialisation to enable cache management hints
mechanism.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Switch from 'unsigned' to 'unsigned int' so that checkpatch doesn't
complain.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
DIAGNOSE 0x318 (diag318) sets information regarding the environment
the VM is running in (Linux, z/VM, etc) and is observed via
firmware/service events.
This is a privileged s390x instruction that must be intercepted by
SIE. Userspace handles the instruction as well as migration. Data
is communicated via VCPU register synchronization.
The Control Program Name Code (CPNC) is stored in the SIE block. The
CPNC along with the Control Program Version Code (CPVC) are stored
in the kvm_vcpu_arch struct.
This data is reset on load normal and clear resets.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200622154636.5499-3-walling@linux.ibm.com
[borntraeger@de.ibm.com: fix sync_reg position]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to Vybrid Security RM, CCM_CCGR11[CG176] can be used to gate
CAAM ipg clock.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-imx@nxp.com
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix a typo in gue.h
Signed-off-by: Aiden Leong <aiden.leong@aibsd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current iterators are impossible to understand at first glance
without switching back and forth between the definitions and their
actual use in the for loops.
So introduce some convenience names to help readability.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the mdb hooks in felix and exports the mdb functions from
ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VersaClock driver now supports some additional bindings to support
child nodes which can configure optional settings like mode, voltage
and slew.
This patch updates the binding document to describe what is available
in the driver.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200603154329.31579-2-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
- Enable CPU clks on Qualcomm IPQ6018 SoCs
* clk-qcom:
clk: qcom: smd: Add support for MSM8936 rpm clocks
dt-bindings: clock: rpmcc: Document MSM8936 compatible
clk: qcom: smd: Add support for SDM660 rpm clocks
clk: qcom: Add ipq6018 apss clock controller
clk: qcom: Add DT bindings for ipq6018 apss clock controller
clk: qcom: Add ipq apss pll driver
dt-bindings: clock: add ipq6018 a53 pll compatible
|
|
Add missing definition of rpm clk for msm8936 soc (also used by msm8939)
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20200613072745.1249003-2-vincent.knecht@mailoo.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for this new phy ID.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for this new phy ID.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Board serial number is a serial number, often available in PCI
*Vital Product Data*.
Also, update devlink-info.rst documentation file.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, this support is limited to active-backup mode, as I'm not sure
about the feasilibity of mapping an xfrm_state's offload handle to
multiple hardware devices simultaneously, and we rely on being able to
pass some hints to both the xfrm and NIC driver about whether or not
they're operating on a slave device.
I've tested this atop an Intel x520 device (ixgbe) using libreswan in
transport mode, succesfully achieving ~4.3Gbps throughput with netperf
(more or less identical to throughput on a bare NIC in this system),
as well as successful failover and recovery mid-netperf.
v2: just use CONFIG_XFRM_OFFLOAD for wrapping, isolate more code with it
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is prep work for initial support of bonding hardware encryption
pass-through support. The bonding driver will fill in the slave_dev
pointer, and we use that to know not to skb_push() again on a given
skb that was already processed on the bond device.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since none of the functions need to modify the input mac address,
constify them.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI PF and VF devlink port can manage the function represented by a
devlink port.
Allow users to set port function's hardware address.
Example of a PCI VF port which supports a port function:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00
$ devlink port function set pci/0000:06:00.0/2 hw_addr 00:11:22:33:44:55
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:11:22:33:44:55
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI PF and VF devlink port can manage the function represented by
a devlink port.
Enable users to query port function's hardware address.
Example of a PCI VF port which supports a port function:
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:11:22:33:44:66
$ devlink port show pci/0000:06:00.0/2 -jp
{
"port": {
"pci/0000:06:00.0/2": {
"type": "eth",
"netdev": "enp6s0pf0vf1",
"flavour": "pcivf",
"pfnum": 0,
"vfnum": 1,
"function": {
"hw_addr": "00:11:22:33:44:66"
}
}
}
}
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently rpmh_invalidate() always returns success. Update its
return type to void.
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
|
|
Commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than
a mask") changed the type of the key_permission callback functions, but
didn't change the type of the hook, which trips indirect call checking with
Control-Flow Integrity (CFI). This change fixes the issue by changing the
hook type to match the functions.
Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
The end-to-end (E2E) workaround is needed for Falcon Ridge (TBT 2)
controller when E2E is enabled for both ends of the host-to-host
connection. However, we never supported full E2E in the first place so
this code is not necessary at the moment. Further this allows us to use
all available rings for data except ring 0 which is reserved for the
control path.
The complete E2E flow control is explained in the USB4 spec so we may
add it back later if needed but at least the networking driver seems to
work fine without, and the higher level stack, like TCP will retransmit
lost packets anyway.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
E0 is not allowed with Level 4:
BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:
'128-bit equivalent strength for link and encryption keys
required using FIPS approved algorithms (E0 not allowed,
SAFER+ not allowed, and P-192 not allowed; encryption key
not shortened'
SC enabled:
> HCI Event: Read Remote Extended Features (0x23) plen 13
Status: Success (0x00)
Handle: 256
Page: 1/2
Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Secure Simple Pairing (Host Support)
LE Supported (Host)
Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 256
Encryption: Enabled with AES-CCM (0x02)
SC disabled:
> HCI Event: Read Remote Extended Features (0x23) plen 13
Status: Success (0x00)
Handle: 256
Page: 1/2
Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Secure Simple Pairing (Host Support)
LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 256
Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 256
Reason: Authentication Failure (0x05)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.
There's a collection of the usual sort of device specific fixes and
also a bunch of people have been working on spidev and the userspace
test program spidev_test so they've got an unusually large collection
of small fixes"
* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a potential use-after-free in spidev_release()
spi: spidev: fix a race between spidev_release and spidev_remove
spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
spi: uapi: spidev: Use TABs for alignment
spi: spi-fsl-dspi: Free DMA memory with matching function
spi: tools: Add macro definitions to fix build errors
spi: tools: Make default_tx/rx and input_tx static
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi: rspi: Use requested instead of maximum bit rate
spi: spidev_test: Use %u to format unsigned numbers
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
|
|
No driver is using snd_soc_component_read32() anymore.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dw74mbv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_component_read32()
We had read/write function for Codec, Platform, etc,
but these has been merged into snd_soc_component_read/write().
Internally, it is using regmap or driver function.
In read case, each styles are like below
regmap
ret = regmap_read(..., reg, &val);
driver function
val = xxx->read(..., reg);
Because of this kind of different style, to keep same read style,
when we merged each read function into snd_soc_component_read(),
we created snd_soc_component_read32(), like below.
commit 738b49efe6c6 ("ASoC: add snd_soc_component_read32")
(1) val = snd_soc_component_read32(component, reg);
(2) ret = snd_soc_component_read(component, reg, &val);
Many drivers are using snd_soc_component_read32(), and
some drivers are using snd_soc_component_read() today.
In generally, we don't check read function successes,
because, we will have many other issues at initial timing
if read function didn't work.
Now we can use soc_component_err() when error case.
This means, it is easy to notice if error occurred.
This patch aggressively merge snd_soc_component_read() and _read32(),
and makes snd_soc_component_read/write() as generally style.
This patch do
1) merge snd_soc_component_read() and snd_soc_component_read32()
2) it uses soc_component_err() when error case (easy to notice)
3) keeps read32 for now by #define
4) update snd_soc_component_read() for all drivers
Because _read() user drivers are not too many, this patch changes
all user drivers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the extended advertisement feature is enabled, a hardcoded min and
max interval of 0x8000 is used. This patch fixes this issue by using
the configured min/max value.
This was validated by setting min/max in main.conf and making sure the
right setting is applied:
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen
25 #93 [hci0] 10.953011
…
Min advertising interval: 181.250 msec (0x0122)
Max advertising interval: 181.250 msec (0x0122)
…
Signed-off-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This separate helper only existed to guarantee the mutual exclusivity of
CLONE_PIDFD and CLONE_PARENT_SETTID for legacy clone since CLONE_PIDFD
abuses the parent_tid field to return the pidfd. But we can actually handle
this uniformely thus removing the helper. For legacy clone we can detect
that CLONE_PIDFD is specified in conjunction with CLONE_PARENT_SETTID
because they will share the same memory which is invalid and for clone3()
setting the separate pidfd and parent_tid fields to the same memory is
bogus as well. So fold that helper directly into _do_fork() by detecting
this case.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: x86@kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.8
This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.
There's also a few new device IDs for x86 systems.
|
|
Add set event function in cmdq helper functions to set specific event.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Link: https://lore.kernel.org/r/1592749115-24158-12-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Export finalize function to client which helps append eoc and jump
command to pkt. Let client decide call finalize or not.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1592749115-24158-9-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add assign function in cmdq helper which assign constant value into
internal register by index.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Link: https://lore.kernel.org/r/1592749115-24158-3-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add rpm smd clocks, PMIC and bus clocks which are required on
SDM630/660 (and APQ variants) for clients to vote on.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622090252.36568-1-konradybcio@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add dt-binding for ipq6018 apss clock controller
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592800092-20533-4-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Checks if the file supports it, and initializes the values that we need.
Caller passes in 'data' pointer, if any, and the callback function to
be used.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If set, this indicates that the file system supports IOCB_WAITQ for
buffered reads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Normally waiting for a page to become unlocked, or locking the page,
requires waiting for IO to complete. Add support for lock_page_async()
and wait_on_page_locked_async(), which are callback based instead. This
allows a caller to get notified when a page becomes unlocked, rather
than wait for it.
We add a new iocb field, ki_waitq, to pass in the necessary data for this
to happen. We can unionize this with ki_cookie, since that is only used
for polled IO. Polled IO can never co-exist with async callbacks, as it is
(by definition) polled completions. struct wait_page_key is made public,
and we define struct wait_page_async as the interface between the caller
and the core.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes in this patch, just in preparation for allowing
more callers.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide a way for the caller to specify that IO should be marked
with REQ_NOWAIT to avoid blocking on allocation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
poll events should be 32-bits to cover EPOLLEXCLUSIVE.
Explicit word-swap the poll32_events for big endian to make sure the ABI
is not changed. We call this feature IORING_FEAT_POLL_32BITS,
applications who want to use EPOLLEXCLUSIVE should check the feature bit
first.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- NULL dereference in octeontx
- PM reference imbalance in ks-sa
- deadlock in crypto manager
- memory leak in drbg
- missing socket limit check on receive SG list size in algif_skcipher
- typos in caam
- warnings in ccp and hisilicon
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - always try to free Jitter RNG instance
crypto: marvell/octeontx - Fix a potential NULL dereference
crypto: algboss - don't wait during notifier callback
crypto: caam - fix typos
crypto: ccp - Fix sparse warnings in sev-dev
crypto: hisilicon - Cap block size at 2^31
crypto: algif_skcipher - Cap recv SG list at ctx->used
hwrng: ks-sa - Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a 5.7 regression fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
scsi: ufs-bsg: Fix runtime PM imbalance on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
|
