| Age | Commit message (Collapse) | Author |
|---|
|
Starting with LunarLake (LNL) and onward, some hardware capabilities are
visible to the sound driver directly. At the same time, these may no
longer be visible to the AudioDSP firmware. Update resource allocation
function to rely on the registers when possible.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Link: https://patch.msgid.link/20250407112352.3720779-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starting with LNL platform, Intel HDAudio Links carry IDs specifying
non-HDAudio transfer type they help facilitate e.g.: 0xC0 for I2S as
defined by AZX_REG_ML_LEPTR_ID_INTEL_SSP.
The mechanism accounts for LEPTR register as it is Reserved if
LCAP.ALT for given Link equals 0.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Link: https://patch.msgid.link/20250407112352.3720779-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is common for the DisplayPort bridges to implement audio support. In
preparation to providing a generic framework for DP audio, add
corresponding interface to struct drm_bridge. As suggested by Maxime
for now this is mostly c&p of the corresponding HDMI audio API.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-2-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
As pointed out by Laurent, OP bits are supposed to describe operations.
Split DRM_BRIDGE_OP_HDMI_AUDIO from DRM_BRIDGE_OP_HDMI instead of
overloading DRM_BRIDGE_OP_HDMI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250314-dp-hdmi-audio-v6-1-dbd228fa73d7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Introduce a configuration option that allows users to build the
intel_pmc_ipc driver without ACPI support. This is useful for
systems where ACPI is not available or desired.
Based on the discussion from the patch [1], it was necessary to
provide this option to accommodate specific use cases.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20250227121522.1802832-6-yong.liang.choong@linux.intel.com/#26280764 [1]
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250313085526.1439092-1-yong.liang.choong@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de5f,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
V4L2_TYPE_IS_OUTPUT() returns true for V4L2_BUF_TYPE_VIDEO_OVERLAY
which definitely belongs to CAPTURE.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Explicitly compare a buffer type only with valid buffer types,
to avoid matching a buffer type outside of the valid buffer type set.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
|
|
DRM bridges are currently considered as a fixed element of a DRM card, and
thus their lifetime is assumed to extend for as long as the card
exists. New use cases, such as hot-pluggable hardware with video bridges,
require DRM bridges to be added to and removed from a DRM card without
tearing the card down. This is possible for connectors already (used by DP
MST), it is now needed for DRM bridges as well.
As a first preliminary step, make bridges reference-counted to allow a
struct drm_bridge (along with the private driver structure embedding it) to
stay allocated even after the driver has been removed, until the last
reference is put.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-2-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Add a macro to allocate and initialize a DRM bridge embedded within a
private driver struct.
Compared to current practice, which is based on [devm_]kzalloc() allocation
followed by open-coded initialization of fields, this allows to have a
common and explicit API to allocate and initialize DRM bridges.
Besides being useful to consolidate bridge driver code, this is a
fundamental step in preparation for adding dynamic lifetime to bridges
based on refcount.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250326-drm-bridge-refcount-v9-1-5e0661fe1f84@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Add palette support and export GAMMA properties via sysfs. User-space
compositors can use this interface for programming gamma ramps or night
mode.
Vesadrm supports palette updates via VGA DAC registers or VESA palette
calls. Up to 256 palette entries are available. Userspace always supplies
gamma ramps of 256 entries. If the native color format does not match
this because pixel component have less then 8 bits, vesadrm interpolates
among the palette entries.
The code uses CamelCase style in a few places to match the VESA manuals.
v3:
- fix coding style
v2:
- use CONFIG_X86_32 instead of __i386__ (checkpatch)
- protect struct vesadrm.pmi with CONFIG_X86_32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-19-tzimmermann@suse.de
|
|
Add support for screen_info setups with VIDEO_TYPE_EFI. Provide the
minimum functionality of reading modes, updating and clearing the display.
There is existing support for these displays provided by simpledrm with
CONFIG_SYSFB_SIMPLEFB=y. Using efidrm over simpledrm will allows for the
mapping of video memory with correct caching. Simpledrm always assumes WC
caching, while fully cached memory is possible with efidrm. Efidrm will
also allow for the use of additional functionality provided by EFI, such
as EDID information.
In addition to efidrm, add struct pixel_format plus initializer macros.
The type and macros describe pixel formats in a generic way on order to
find the DRM format from the screen_info settings. Similar existing code
in SIMPLEFB_FORMATS and fbdev is not really what is needed in efidrm,
but SIMPLEFB_FORMATS can later be converted to struct pixel_format.
v4:
- depend on CONFIG_EFI
- disallow module for now as efi_mem_desc_lookup() is not exported
v3:
- depend on !SYSFB_SIMPLEFB (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-15-tzimmermann@suse.de
|
|
Move the calculation of the bits per pixels for screen_info into a
helper function. This will make it available to other callers besides
the firmware code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-14-tzimmermann@suse.de
|
|
Add a YAML schema for the T-HEAD TH1520 SoC reset controller. This
controller manages resets for subsystems such as the GPU within the
TH1520 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-2-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
All users are converted to lock guards.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250313142524.388478168@linutronix.de
|
|
The SMP conditional wrappers around raw_spin_[un]lock() have no real
value. On !SMP kernels the lock operations are NOOPs except for a
preempt_disable/enable() pair on PREEMPT enabled kernels, which are not
really worth to optimize for. Aside of that this evades lockdep on !SMP
kernels.
Remove the !SMP stubs and make it unconditional.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250313142524.011345765@linutronix.de
|
|
Use a common iterator for all callbacks. We could go for something even
more elaborate (advance step-by-step similar to iov_iter) but I really
don't think this is warranted.
Link: https://lore.kernel.org/r/20250329-work-freeze-v2-5-a47af37ecc3d@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use a common iterator for all callbacks.
Link: https://lore.kernel.org/r/20250329-work-freeze-v2-4-a47af37ecc3d@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
During freeze/thaw we need to be able to freeze all writers during
suspend/hibernate. Otherwise tasks such as systemd-journald that mmap a
file and write to it will not be frozen after we've already frozen the
filesystem.
This has some risk of not being able to freeze processes in case a
process has acquired SB_FREEZE_PAGEFAULT under mmap_sem or
SB_FREEZE_INTERNAL under some other filesytem specific lock. If the
filesystem is frozen, a task can block on the frozen filesystem with
e.g., mmap_sem held. If some other task then blocks on grabbing that
mmap_sem, hibernation ill fail because it is unable to hibernate a task
holding mmap_sem. This could be fixed by making a range of filesystem
related locks use freezable sleeping. That's impractical and not
warranted just for suspend/hibernate. Assume that this is an infrequent
problem and we've given userspace a way to skip filesystem freezing
through a sysfs file.
Link: https://lore.kernel.org/r/20250402-work-freeze-v2-2-6719a97b52ac@kernel.org
Link: https://lore.kernel.org/r/20250327140613.25178-3-James.Bottomley@HansenPartnership.com
[brauner: make all freeze levels set TASK_FREEZABLE and rewrite commit message]
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Percpu-rwsems are used for superblock locking. However, we know the
read percpu-rwsem we take for sb_start_write() on a frozen filesystem
needs not to inhibit system from suspending or hibernating. That
means it needs to wait with TASK_UNINTERRUPTIBLE | TASK_FREEZABLE.
Introduce a new percpu_down_read_freezable() that allows us to control
whether TASK_FREEZABLE is added to the wait flags.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/r/20250327140613.25178-2-James.Bottomley@HansenPartnership.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All callers and implementations are now removed, so remove the operation
and update the documentation to match.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250402150005.2309458-10-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This will be the replacement for shmem_writepage().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250402150005.2309458-6-willy@infradead.org
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add new function *_twothreecell() to extend support to parse three-cell
interrupts which encoded as <instance hwirq irqflag>, the translate
function will retrieve irq number and flag from last two cells.
This API will be used in gpio irq driver which need to work with
two or three cells cases.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250326-04-gpio-irq-threecell-v3-1-aab006ab0e00@gentoo.org
|
|
The family of functions:
lookup_one()
lookup_one_unlocked()
lookup_one_positive_unlocked()
appear designed to be used by external clients of the filesystem rather
than by filesystems acting on themselves as the lookup_one_len family
are used.
They are used by:
btrfs/ioctl - which is a user-space interface rather than an internal
activity
exportfs - i.e. from nfsd or the open_by_handle_at interface
overlayfs - at access the underlying filesystems
smb/server - for file service
They should be used by nfsd (more than just the exportfs path) and
cachefs but aren't.
It would help if the documentation didn't claim they should "not be
called by generic code".
Also the path component name is passed as "name" and "len" which are
(confusingly?) separate by the "base". In some cases the len in simply
"strlen" and so passing a qstr using QSTR() would make the calling
clearer.
Other callers do pass separate name and len which are stored in a
struct. Sometimes these are already stored in a qstr, other times it
easily could be.
So this patch changes these three functions to receive a 'struct qstr *',
and improves the documentation.
QSTR_LEN() is added to make it easy to pass a QSTR containing a known
len.
[brauner@kernel.org: take a struct qstr pointer]
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-2-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit fa8dede4d0a0 ("irqchip: remove davinci aintc driver") removed the
davinci aintc driver but left behind the associated header. Remove it
now.
Fixes: fa8dede4d0a0 ("irqchip: remove davinci aintc driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20250306084552.15894-1-brgl@bgdev.pl
|
|
__VA_OPT__ is a macro that is useful when some arguments can be present
or not to entirely skip some part of a definition. Unfortunately, it
is a too recent addition that some of the still supported old GCC
versions do not know about, and is anyway not part of C11 that is the
version used in the kernel.
Find a trick to remove this macro, typically '__VA_ARGS__ + 0' is a
workaround used in netlink.h which works very well here, as we either
expect:
- 0
- A positive value
- No value, which means the field should be 0.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503181330.YcDXGy7F-lkp@intel.com/
Fixes: 7ce0d16d5802 ("mtd: spinand: Add an optional frequency to read from cache macros")
Cc: stable@vger.kernel.org
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The line_index member in the struct acpi_gpio_params replicates
what is covered in the ACPI GpioIo() or GpioInt() resource.
The value there is limited to 16-bit one, so we don't really need
to have a full 32-bit storage for it. Together with followed
boolean the structure will be smaller.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3)
Function old new delta
acpi_gpio_property_lookup 417 414 -3
Total: Before=15361, After=15358, chg -0.02%
`pahole` difference before and after:
- /* size: 12, cachelines: 1, members: 3 */
- /* padding: 3 */
+ /* size: 8, cachelines: 1, members: 3 */
+ /* padding: 1 */
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Normally scratch page is not allowed when a vm is operate under page
fault mode, i.e., in the existing codes, DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE
and DRM_XE_VM_CREATE_FLAG_FAULT_MODE are mutual exclusive. The reason
is fault mode relies on recoverable page to work, while scratch page
can mute recoverable page fault.
On xe2 and xe3, out of bound prefetch can cause page fault and further
system hang because xekmd can't resolve such page fault. SYCL and OCL
language runtime requires out of bound prefetch to be silently dropped
without causing any functional problem, thus the existing behavior
doesn't meet language runtime requirement.
At the same time, HW prefetching can cause page fault interrupt. Due to
page fault interrupt overhead (i.e., need Guc and KMD involved to fix
the page fault), HW prefetching can be slowed by many orders of magnitude.
Fix those problems by allowing scratch page under fault mode for xe2 and
xe3. With scratch page in place, HW prefetching could always hit scratch
page instead of causing interrupt.
A side effect is, scratch page could hide application program error.
Application out of bound accesses are hided by scratch page mapping,
instead of get reported to user.
v2: Refine commit message (Thomas)
v3: Move the scratch page flag check to after scratch page wa (Thomas)
v4: drop NEEDS_SCRATCH macro (matt)
Add a comment to DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250403165328.2438690-4-oak.zeng@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
<crypto/internal/chacha.h> is now included only by crypto/chacha.c, so
fold it into there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Following the example of the crc32 and crc32c code, make the crypto
subsystem register both generic and architecture-optimized chacha20,
xchacha20, and xchacha12 skcipher algorithms, all implemented on top of
the appropriate library functions. This eliminates the need for every
architecture to implement the same skcipher glue code.
To register the architecture-optimized skciphers only when
architecture-optimized code is actually being used, add a function
chacha_is_arch_optimized() and make each arch implement it. Change each
architecture's ChaCha module_init function to arch_initcall so that the
CPU feature detection is guaranteed to run before
chacha_is_arch_optimized() gets called by crypto/chacha.c. In the case
of s390, remove the CPU feature based module autoloading, which is no
longer needed since the module just gets pulled in via function linkage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto_ctr_encrypt_walk() is no longer used so remove it.
Note that some existing drivers currently rely on the transitive
includes of some other crypto headers so retain those for the time
being.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Update the documentation to be consistent with the fact that shash
may not be used in hard IRQs.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add new API interface to do SEV/SNP platform shutdown when KVM module
is unloaded.
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add acomp_walk which is similar to skcipher_walk but tailored for
acomp.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the dynamic stream allocation code into acomp and make it
available as a helper for acomp algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Per-cpu buffers can be wasteful when the number of CPUs is large,
especially if the buffer itself is likely to never be used. Reduce
such wastage by only allocating them on first use of a particular
CPU.
On start-up allocate a single buffer on the first possible CPU.
For every other CPU a work struct will be scheduled on first use
to allocate the buffer for that CPU. Until the allocation succeeds
simply use the first CPU's buffer which is protected under a spin
lock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 9ae4577bc077 ("crypto: api - Use work queue in
crypto_destroy_instance") introduced a work struct to free an
instance after the last user goes away.
Move the delayed work from the instance into its template so that
when the template is unregistered it can ensure that all its
instances have been freed before returning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CS related fields are sparse in the struct spi_device. Group them.
While at it, fix the comment style of cs_index_mask.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250331103609.4160281-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit e894efef9ac7 ("ASoC: core: add support to card rebind")
there is a support for card rebind. The support is only partial though.
Let's consider the following scenarios both of which aim to enumerate a
sound card:
1)
snd_soc_add_component(comp1);
(...)
snd_soc_register_card(card1);
2)
snd_soc_register_card(card1);
(...)
snd_soc_add_component(comp1);
For the sake of simplicity, let comp1 be the last dependency needed for
the card1 to enumerate.
Case 1) will end up succeeding whereas 2) is a certain fail -
snd_soc_bind_card() does not honor unbind_card_list so even a non-fatal
return code of EPROBE_DEFER will cause the card to collapse. Given the
typical usecase of platform_device serving as a card->dev and its
probe() ending with:
int carddev_probe(struct platform_device *pdev)
{
(...)
return devm_snd_soc_register_card(dev, card);
}
failure to register card triggers device_unbind_cleanup() -
really_probe() in dd.c.
To allow for card registration to be deferred while being friendly
towards existing users of devm_snd_soc_register_card(), add new
card->devres_dev field, and devm_xxx() variants for card registration:
devm_snd_soc_register_deferrable_card() (external)
devm_snd_soc_bind_card() (internal)
In essence, if requested, devm_snd_soc_bind_card() replaces
snd_soc_bind_card(). The rebind procedure takes care of destroying
old devres before attempting the new bind. This makes sure nothing is
left hanging if binding fails and card becomes unbound but is still
registered to the ASoC framework.
To allow snd_soc_bind_card() to be reused by the deferrable friends,
move 'client_mutex' locking to the function's callers and select between
devm_xxx and non-devm_xxx variants of snd_soc_bind_card() based on
card->devres_dev.
On top of the feature, the refactoring brings two benefits:
a) single lock/unlock of 'client_mutex' in snd_soc_add_component()
instead of ambiguous unlock and immediate lock in
snd_soc_try_rebind_card()
b) all unbind_card_list manipulations done under 'client_mutex'
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250404101622.3673850-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
|
|
The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().
Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de
|
|
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de
|
|
hrtimer_init() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/003722f60c7a2a4f8d4ed24fb741aa313b7e5136.1738746927.git.namcao@linutronix.de
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. To simplify future commits, change the
signatures of existing cgroup-based rstat functions to become css-based and
rename them to reflect that.
Though the signatures have changed, the implementations have not. Within
these functions use the css->cgroup pointer to obtain the associated cgroup
and allow code to function the same just as it did before this patch. At
applicable call sites, pass the subsystem-specific css pointer as an
argument or pass a pointer to cgroup::self if not in subsystem context.
Note that cgroup_rstat_updated_list() and cgroup_rstat_push_children()
are not altered yet since there would be a larger amount of css to
cgroup conversions which may overcomplicate the code at this
intermediate phase.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The cgroup struct has a css field called "self". The main difference
between this css and the others found in the cgroup::subsys array is that
cgroup::self has a NULL subsystem pointer. There are several places where
checks are performed to determine whether the css in question is
cgroup::self or not. Instead of accessing css->ss directly, introduce a
helper function that shows the intent and use where applicable.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. The base stats are not an actual subsystem,
but in future commits they will have exclusive rstat trees just as other
subsystems will.
Moving the base stat objects into a new struct allows the cgroup_rstat_cpu
struct to become more compact since it now only contains the minimum amount
of pointers needed for rstat participation. Subsystems will (in future
commits) make use of the compact cgroup_rstat_cpu struct while avoiding the
memory overhead of the base stat objects which they will not use.
An instance of the new struct cgroup_rstat_base_cpu was placed on the
cgroup struct so it can retain ownership of these base stats common to all
cgroups. A helper function was added for looking up the cpu-specific base
stats of a given cgroup. Finally, initialization and variable names were
adjusted where applicable.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
