Age | Commit message (Collapse) | Author |
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit bigger than last week, but overall amdgpu/xe
with some ivpu bits and a random few fixes, and dropping the
ttm_backup struct which wrapped struct file and was recently
frowned at.
drm:
- Fix overflow when generating wedged event
ttm:
- Fix documentation
- Remove struct ttm_backup
panel:
- simple: Fix timings for AUO G101EVN010
amdgpu:
- DC FP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
xe:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
i915:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
ivpu:
- Increase timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
v3d:
- Avoid memory leak in job handling"
* tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation
drm/xe: Add config control for svm flush work
drm/xe: Release force wake first then runtime power
drm/xe/gsc: do not flush the GSC worker from the reset path
drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs
drm/xe: Add page queue multiplier
drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush
drm/amdgpu: fix pm notifier handling
Revert "drm/amd: Stop evicting resources on APUs in suspend"
drm/amdgpu/vcn: using separate VCN1_AON_SOC offset
drm/amd/display: Fix wrong handling for AUX_DEFER case
drm/amd/display: Copy AUX read reply data whenever length > 0
drm/amd/display: Remove incorrect checking in dmub aux handler
drm/amd/display: Fix the checking condition in dmub aux handling
drm/amd/display: Shift DMUB AUX reply command if necessary
drm/amd/display: Call FP Protect Before Mode Programming/Mode Support
...
|
|
Add the function ring_buffer_record_is_on_cpu() that returns true if the
ring buffer for a give CPU is writable and false otherwise.
Also add tracer_tracing_is_on_cpu() to return if the ring buffer for a
given CPU is writeable for a given trace_array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212236.059853898@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
if it works under NMI and doesn't use any context-dependent things,
should be fine for any program type. The detailed discussion is in [1].
[1] https://lore.kernel.org/all/CAEf4Bza6gK3dsrTosk6k3oZgtHesNDSrDd8sdeQ-GiS6oJixQg@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20250506061434.94277-2-yangfeng59949@163.com
|
|
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Keep track of the number requests a ring currently has allocated (and
not freed), it'll be needed in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c8f8308294dc2a1cb8925d984d937d4fc14ab5d4.1746788718.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit f7ee1f13d606 ("mm/vmalloc: enable mapping of huge pages at pte
level in vmap") added its support by reusing the set_huge_pte_at() API,
which is otherwise only used for user mappings. But when unmapping those
huge ptes, it continued to call ptep_get_and_clear(), which is a
layering violation. To date, the only arch to implement this support is
powerpc and it all happens to work ok for it.
But arm64's implementation of ptep_get_and_clear() can not be safely
used to clear a previous set_huge_pte_at(). So let's introduce a new
arch opt-in function, arch_vmap_pte_range_unmap_size(), which can
provide the size of a (present) pte. Then we can call
huge_ptep_get_and_clear() to tear it down properly.
Note that if vunmap_range() is called with a range that starts in the
middle of a huge pte-mapped page, we must unmap the entire huge page so
the behaviour is consistent with pmd and pud block mappings. In this
case emit a warning just like we do for pmd/pud mappings.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20250422081822.1836315-9-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Convert page_table_check_p[mu]d_set(...) to
page_table_check_p[mu]ds_set(..., nr) to allow checking a contiguous set
of pmds/puds in single batch. We retain page_table_check_p[mu]d_set(...)
as macros that call new batch functions with nr=1 for compatibility.
arm64 is about to reorganise its pte/pmd/pud helpers to reuse more code
and to allow the implementation for huge_pte to more efficiently set
ptes/pmds/puds in batches. We need these batch-helpers to make the
refactoring possible.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20250422081822.1836315-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Previously, when reducing a qdisc's limit via the ->change() operation, only
the main skb queue was trimmed, potentially leaving packets in the gso_skb
list. This could result in NULL pointer dereference when we only check
sch->limit against sch->q.qlen.
This patch introduces a new helper, qdisc_dequeue_internal(), which ensures
both the gso_skb list and the main queue are properly flushed when trimming
excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie)
are updated to use this helper in their ->change() routines.
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Reported-by: Will <willsroot@protonmail.com>
Reported-by: Savy <savy@syst3mfailure.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_CGROUPS is not selected, {get,put}_cgroup_ns become no-ops
and therefore it is not necessary to compile in the code for changing
the reference count.
When CONFIG_CGROUP is selected, there is no valid case where
either of {get,put}_cgroup_ns() will be called with a NULL argument.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Link: https://lore.kernel.org/20250508184930.183040-3-jsavitz@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow the power subsystem to support filesystem freeze for
suspend and hibernate.
For some kernel subsystems it is paramount that they are guaranteed that
they are the owner of the freeze to avoid any risk of deadlocks. This is
the case for the power subsystem. Enable it to recognize whether it did
actually freeze the filesystem.
If userspace has 10 filesystems and suspend/hibernate manges to freeze 5
and then fails on the 6th for whatever odd reason (current or future)
then power needs to undo the freeze of the first 5 filesystems. It can't
just walk the list again because while it's unlikely that a new
filesystem got added in the meantime it still cannot tell which
filesystems the power subsystem actually managed to get a freeze
reference count on that needs to be dropped during thaw.
There's various ways out of this ugliness. For example, record the
filesystems the power subsystem managed to freeze on a temporary list in
the callbacks and then walk that list backwards during thaw to undo the
freezing or make sure that the power subsystem just actually exclusively
freezes things it can freeze and marking such filesystems as being owned
by power for the duration of the suspend or resume cycle. I opted for
the latter as that seemed the clean thing to do even if it means more
code changes.
If hibernation races with filesystem freezing (e.g. DM reconfiguration),
then hibernation need not freeze a filesystem because it's already
frozen but userspace may thaw the filesystem before hibernation actually
happens.
If the race happens the other way around, DM reconfiguration may
unexpectedly fail with EBUSY.
So allow FREEZE_EXCL to nest with other holders. An exclusive freezer
cannot be undone by any of the other concurrent freezers.
Link: https://lore.kernel.org/r/20250329-work-freeze-v2-6-a47af37ecc3d@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a header that describes the 3A statistics buffer and the
parameters buffer for C3 ISP
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
C3ISP_PARAMS is the C3 ISP Parameters format.
C3ISP_STATS is the C3 ISP Statistics format.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.
v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com
|
|
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
The xSPI IP found on RZ/G3E SoC similar to RPC-IF interface, but it
can support writes on memory-mapped area. Even though the registers are
different, the rpcif driver code can be reused for xSPI by adding wrapper
functions.
|
|
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new TSM Measurement helper library (tsm-mr) for TVM guest drivers
to expose MRs (Measurement Registers) as sysfs attributes, with Crypto
Agility support.
Add the following new APIs (see include/linux/tsm-mr.h for details):
- tsm_mr_create_attribute_group(): Take on input a `struct
tsm_measurements` instance, which includes one `struct
tsm_measurement_register` per MR with properties like `TSM_MR_F_READABLE`
and `TSM_MR_F_WRITABLE`, to determine the supported operations and create
the sysfs attributes accordingly. On success, return a `struct
attribute_group` instance that will typically be included by the guest
driver into `miscdevice.groups` before calling misc_register().
- tsm_mr_free_attribute_group(): Free the memory allocated to the attrubute
group returned by tsm_mr_create_attribute_group().
tsm_mr_create_attribute_group() creates one attribute for each MR, with
names following this pattern:
MRNAME[:HASH]
- MRNAME - Placeholder for the MR name, as specified by
`tsm_measurement_register.mr_name`.
- :HASH - Optional suffix indicating the hash algorithm associated with
this MR, as specified by `tsm_measurement_register.mr_hash`.
Support Crypto Agility by allowing multiple definitions of the same MR
(i.e., with the same `mr_name`) with distinct HASH algorithms.
NOTE: Crypto Agility, introduced in TPM 2.0, allows new hash algorithms to
be introduced without breaking compatibility with applications using older
algorithms. CC architectures may face the same challenge in the future,
needing new hashes for security while retaining compatibility with older
hashes, hence the need for Crypto Agility.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
[djbw: fixup bin_attr const conflict]
Link: https://patch.msgid.link/20250509020739.882913-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We don't need these definitions. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldr6pqlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no snd_soc_disconnect_sync() implementation, and no one is
using it. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz6qpql7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
* tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not using key encryption size when its known
Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
====================
Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Retain the locked design, but check rate-limiting even when the lock
could not be acquired.
Link: https://lore.kernel.org/all/Z_VRo63o2UsVoxLG@pathway.suse.cz/
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
The ___ratelimit() function special-cases the jiffies-counter value of zero
as "uninitialized". This works well on 64-bit systems, where the jiffies
counter is not going to return to zero for more than half a billion years
on systems with HZ=1000, but similar 32-bit systems take less than 50 days
to wrap the jiffies counter. And although the consequences of wrapping the
jiffies counter seem to be limited to minor confusion on the duration of
the rate-limiting interval that happens to end at time zero, it is almost
no work to avoid this confusion.
Therefore, introduce a RATELIMIT_INITIALIZED bit to the ratelimit_state
structure's ->flags field so that a ->begin value of zero is no longer
special.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
The ratelimit_state structure's ->missed field is sometimes incremented
locklessly, and it would be good to avoid lost counts. This is also
needed to count the number of misses due to trylock failure. Therefore,
convert the ratelimit_state structure's ->missed field to atomic_t.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
A number of ratelimit use cases do open-coded access to the
ratelimit_state structure's ->missed field. This works, but is a bit
messy and makes it more annoying to make changes to this field.
Therefore, provide a ratelimit_state_inc_miss() function that increments
the ->missed field, a ratelimit_state_get_miss() function that reads
out the ->missed field, and a ratelimit_state_reset_miss() function
that reads out that field, but that also resets its value to zero.
These functions will replace client-code open-coded uses of ->missed.
In addition, a new ratelimit_state_reset_interval() function encapsulates
what was previously open-coded lock acquisition and direct field updates.
[ paulmck: Apply kernel test robot feedback. ]
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
drm:
- Fix overflow when generating wedged event
ivpu:
- Increate timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
panel:
- simple: Fix timings for AUO G101EVN010
ttm:
- Fix documentation
- Remove struct ttm_backup
v3d:
- Avoid memory leak in job handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250508104939.GA76697@2a02-2454-fd5e-fd00-c110-cbf2-6528-c5be.dyn6.pyur.net
|
|
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The CPU hotplug handlers are called twice: at prepare and online stage.
Their role is to:
1) Enable/disable a CPU context. This is irrelevant and even buggy at
the prepare stage because the CPU is still offline. On early
secondary CPU up, creating an event attached to that CPU might
silently fail because the CPU context is observed as online but the
context installation's IPI failure is ignored.
2) Update the scope cpumasks and re-migrate the events accordingly in
the CPU down case. This is irrelevant at the prepare stage.
3) Remove the events attached to the context of the offlining CPU. It
even uses an (unnecessary) IPI for it. This is also irrelevant at the
prepare stage.
Also none of the *_PREPARE and *_STARTING architecture perf related CPU
hotplug callbacks rely on CPUHP_PERF_PREPARE.
CPUHP_AP_PERF_ONLINE is enough and the right place to perform the work.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424161128.29176-4-frederic@kernel.org
|
|
Since commit 2070887fdeac ("futex: fix restart in wait_requeue_pi"),
futex_wait_requeue_pi() no longer uses restart_block. Update the comment
accordingly.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250428193445.4571-1-namcao@linutronix.de
|
|
Contrary to how it is implemented right now, the usb480m clock is a
controllable mux that can switch between the 24MHz oscillator and the
clock output of the usb2phy.
Add the needed clock-id to allow setting this mux from DT.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-2-heiko@sntech.de
|
|
Renesas RZ/G3E XSPI and GBETH Core DT Binding Definitions
XSPI and Gigabit Ethernet PTP reference core clock DT binding
definitions for the Renesas RZ/G3E (R9A09G047) SoC, shared by driver and
DT source files.
|
|
Add definitions for XSPI core clock and Gigabit Ethernet PTP reference
core clocks in the R9A09G047 CPG DT bindings header file.
The clk_spi is modelled as a fixed divider clock with parent clk_spix2 and
factor two as both parent and child share same gating bit.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
These clocks are for SD/SDIO tuning purpose and come with registers
in GRF syscon.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250506092206.46143-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-10-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Move this API to the canonical timers_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-8-mingo@kernel.org
|
|
Move this macro to the canonical TIMER_* namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-7-mingo@kernel.org
|
|
Move this API to the canonical __timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-6-mingo@kernel.org
|
|
Move this API to the canonical __timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-5-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-4-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-3-mingo@kernel.org
|
|
Pull in the platform MSI/GIC changes which are seperate for the PCI
endpoint driver updates.
|
|
Since the integer wrapping sanitizer's behavior depends on its associated
.scl file, we must force a full rebuild if the file changes. If not,
instrumentation may differ between targets based on when they were built.
Generate a new header file, integer-wrap.h, any time the Clang .scl
file changes. Include the header file in compiler-version.h when its
associated feature name, INTEGER_WRAP, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20250503184623.2572355-3-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
While the randstruct GCC plugin was being rebuilt if the randstruct seed
changed, Clang builds did not notice the change. This could result in
differing struct layouts in a target depending on when it was built.
Include the existing generated header file in compiler-version.h when
its associated feature name, RANDSTRUCT, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Link: https://lore.kernel.org/r/20250503184623.2572355-2-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There was no dependency between the plugins changing and the rest of the
kernel being built. This could cause strange behaviors as instrumentation
could vary between targets depending on when they were built.
Generate a new header file, gcc-plugins.h, any time the GCC plugins
change. Include the header file in compiler-version.h when its associated
feature name, GCC_PLUGINS, is defined. This will be picked up by fixdep
and force rebuilds where needed.
Add a generic "touch" kbuild command, which will be used again in
a following patch. Add a "normalize_path" string helper to make the
"TOUCH" output less ugly.
Link: https://lore.kernel.org/r/20250503184623.2572355-1-kees@kernel.org
Tested-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Currently, to statically initialize the struct members of the `type`
object created by _DEFINE_FLEX(), the internal `obj` member must be
explicitly referenced at the call site. See:
struct flex {
int a;
int b;
struct foo flex_array[];
};
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.obj = {
.a = 0,
.b = 1,
},
});
This leaks _DEFINE_FLEX() internal implementation details and make
the helper harder to use and read.
Fix this and allow for a more natural and intuitive C99 init-style:
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.a = 0,
.b = 1,
});
Note that before these changes, the `initializer` argument was optional,
but now it's required.
Also, update "counter" member initialization in DEFINE_FLEX().
Fixes: 26dd68d293fd ("overflow: add DEFINE_FLEX() for on-stack allocs")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aBQVeyKfLOkO9Yss@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add new STACK_FLEX_ARRAY_SIZE() helper to get the size of a
flexible-array member defined using DEFINE_FLEX()/DEFINE_RAW_FLEX()
at compile time.
This is essentially the same as ARRAY_SIZE() but for on-stack
flexible-array members.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/83d53744e11c80eb3f03765238cbe648855f4168.1745355442.git.gustavoars@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|
|
Since commits 7ff0104a8052 ("f2fs: Remove f2fs_write_node_page()") and
3b47398d9861 ("f2fs: Remove f2fs_write_meta_page()'), f2fs can't be
called from reclaim context any more. Remove all code keyed of the
wbc->for_reclaim flag, which is now only set for writing out swap or
shmem pages inside the swap code, but never passed to file systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
sensor_config is not used anywhere and its struct int3472_sensor_config
type also is not declared anywhere, drop it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|