| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the qcom AHCI controller DT bindings to DT schema (from
Rayyan)
- Cleanup of libata core and drivers code handling controller and
device quirks to rename "blacklist" to the more neutral "quirk" and
to replace the rarely used "horkage" term with the more common
"quirk" naming (me)
- Add libata-core message to print the quirks applied to a controller
or device (me)
- Remove the not-so-useful function ata_noop_qc_prep() from libata core
(me)
- ahci_imx driver cleanup, improvements and DT bindings compatible
strings update (Richard and Dan)
- libahci_platform improvements (Zhang)
- Remove obsolete functions declarations from libata header files (from
Gaosheng)
- Improve teh ahci_brcm driver using managed device resources funetions
(Zhang)
- Introduce new helper function to improve libata EH code readability
(Niklas)
- Enable module autoloading for the pata_ftide010, pata_ixp4xx and
sata_gemini drivers (Liao)
- Move SATA related functions and data declaraions from libata-core to
libata-sata (me)
- Rename the function handling the sense data for successful NCQ
commands log to better reflect that function actions (me)
- Reduce libata memory usage by moving port resources to struct
ata_device and by optimizing the management of resources for CDL
capable devices (me)
- Improve libata-eh handling of failed ATA passthrough commands
(Niklas)
* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
ata: libata: Fix W=1 compilation warning
ata: libata: Improve CDL resource management
ata: libata: Introduce ata_dev_free_resources
ata: libata: Move sector_buf from struct ata_port to struct ata_device
ata: libata: Rename ata_eh_read_sense_success_ncq_log()
ata: libata: Move sata_std_hardreset() definition to libata-sata.c
ata: libata: Move sata_down_spd_limit() to libata-sata.c
ata: libata: Improve __ata_qc_complete()
ata: libata-scsi: Improve ata_scsi_handle_link_detach()
ata: libata: Cleanup libata-transport
ata: sata_gemini: Enable module autoloading
ata: pata_ixp4xx: Enable module autoloading
ata: pata_ftide010: Enable module autoloading
ata: libata: Add helper ata_eh_decide_disposition()
ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
ata: libata: Remove obsolete function declarations
ata: ahci_imx: Fix error code in probe()
ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
ata: ahci_imx: Correct the email address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- New HID over SPI driver for Goodix devices that don't follow
Microsoft's HID-over-SPI specification, so a separate driver is
needed. Currently supported device is GT7986U touchscreen (Charles
Wang)
- support for new hardware features in Wacom driver (high-res wheel
scrolling, touchstrings with relative motions, support for two
touchrings) (Jason Gerecke)
- support for customized vendor firmware loading in intel-ish driver
(Zhang Lixu)
- fix for theoretical race condition in i2c-hid (Dmitry Torokhov)
- support for HIDIOCREVOKE -- evdev's EVIOCREVOKE equivalent in hidraw
(Peter Hutterer)
- initial hidraw selftest implementation (Benjamin Tissoires)
- constification of device-specific report descriptors (Thomas
Weißschuh)
- other small assorted fixes and device ID / quirk additions
* tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
hid: cp2112: Use irq_get_trigger_type() helper
HID: i2c-hid: ensure various commands do not interfere with each other
HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio
HID: wacom: Do not warn about dropped packets for first packet
HID: wacom: Support sequence numbers smaller than 16-bit
HID: lg: constify fixed up report descriptor
HID: uclogic: constify fixed up report descriptor
HID: waltop: constify fixed up report descriptor
HID: sony: constify fixed up report descriptor
HID: pxrc: constify fixed up report descriptor
HID: steelseries: constify fixed up report descriptor
HID: viewsonic: constify fixed up report descriptor
HID: vrc2: constify fixed up report descriptor
HID: xiaomi: constify fixed up report descriptor
HID: maltron: constify fixed up report descriptor
HID: keytouch: constify fixed up report descriptor
HID: holtek-kbd: constify fixed up report descriptor
HID: dr: constify fixed up report descriptor
HID: bigbenff: constify fixed up report descriptor
HID: picoLCD: Use backlight power constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Hans de Goede:
- asus-wmi: Add support for vivobook fan profiles
- dell-laptop: Add knobs to change battery charge settings
- lg-laptop: Add operation region support
- intel-uncore-freq: Add support for efficiency latency control
- intel/ifs: Add SBAF test support
- intel/pmc: Ignore all LTRs during suspend
- platform/surface: Support for arm64 based Surface devices
- wmi: Pass event data directly to legacy notify handlers
- x86/platform/geode: switch GPIO buttons and LEDs to software
properties
- bunch of small cleanups, fixes, hw-id additions, etc.
* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
MAINTAINERS: adjust file entry in INTEL MID PLATFORM
platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
platform/mellanox: mlxbf-pmc: fix lockdep warning
platform/x86/amd: pmf: Add quirk for TUF Gaming A14
platform/x86: touchscreen_dmi: add nanote-next quirk
platform/x86: asus-wmi: don't fail if platform_profile already registered
platform/x86: asus-wmi: add debug print in more key places
platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
MAINTAINERS: Add Intel MID section
platform/x86: panasonic-laptop: Add support for programmable buttons
platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
platform/x86: intel/pmc: Ignore all LTRs during suspend
platform/x86: wmi: Call both legacy and WMI driver notify handlers
platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
platform/x86: wmi: Remove wmi_get_event_data()
platform/x86: wmi: Pass event data directly to legacy notify handlers
platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
platform/x86: x86-android-tablets: Fix spelling in the comments
platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- video: Reduce code when CONFIG_HAS_IOPORT=n
- xenfb: Fix crash by assigning fb_info->device
- pxafb: Fix possible use after free in pxafb_task()
- efifb: Introduce and use new devm_register_framebuffer() function
- mmpfb: Utilize devm_clk_get_enabled() helpers
- various typo fixes and code cleanups
* tag 'fbdev-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: Fix typo in comment
fbdev: pxafb: Fix possible use after free in pxafb_task()
fbdev: xen-fbfront: Assign fb_info->device
fbdev: hyperv_fb: Convert comma to semicolon
fbdev: imsttfb: convert comma to semicolon
fbdev: pxa3xx-gcu: Convert comma to semicolon
fbdev: efifb: Use driver-private screen_info for sysfs
fbdev: efifb: Use devm_register_framebuffer()
fbdev: efifb: Register sysfs groups through driver core
fbdev: Introduce devm_register_framebuffer()
fbdev: omapfb: Use sysfs_emit_at() to simplify code
fbdev: omapfb: panel-sony-acx565akm: Simplify show_cabc_available_modes()
fbdev: mmp: Use devm_clk_get_enabled() helpers
fbdev: hpfb: Fix an error handling path in hpfb_dio_probe()
video: Handle HAS_IOPORT dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Allow ATS on VF when parent device is identity mapped
- Optimize unmap path on ARM io-pagetable implementation
- Use of_property_present()
ARM-SMMU changes:
- SMMUv2:
- Devicetree binding updates for Qualcomm MMU-500 implementations
- Extend workarounds for broken Qualcomm hypervisor to avoid
touching features that are not available (e.g. 16KiB page
support, reserved context banks)
- SMMUv3:
- Support for NVIDIA's custom virtual command queue hardware
- Fix Stage-2 stall configuration and extend tests to cover this
area
- A bunch of driver cleanups, including simplification of the
master rbtree code
- Minor cleanups and fixes across both drivers
Intel VT-d changes:
- Retire si_domain and convert to use static identity domain
- Batched IOTLB/dev-IOTLB invalidation
- Small code refactoring and cleanups
AMD-Vi changes:
- Cleanup and refactoring of io-pagetable code
- Add parameter to limit the used io-pagesizes
- Other cleanups and fixes"
* tag 'iommu-updates-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (77 commits)
dt-bindings: arm-smmu: Add compatible for QCS8300 SoC
iommu/amd: Test for PAGING domains before freeing a domain
iommu/amd: Fix argument order in amd_iommu_dev_flush_pasid_all()
iommu/amd: Add kernel parameters to limit V1 page-sizes
iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg
iommu/arm-smmu-v3: Add types for each level of the CD table
iommu/arm-smmu-v3: Shrink the cdtab l1_desc array
iommu/arm-smmu-v3: Do not use devm for the cd table allocations
iommu/arm-smmu-v3: Remove strtab_base/cfg
iommu/arm-smmu-v3: Reorganize struct arm_smmu_strtab_cfg
iommu/arm-smmu-v3: Add types for each level of the 2 level stream table
iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()
iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660
iommu/arm-smmu-v3: Use the new rb tree helpers
dt-bindings: arm-smmu: document the support on SA8255p
iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent
iommu/tegra241-cmdqv: Drop static at local variable
iommu/tegra241-cmdqv: Fix ioremap() error handling in probe()
iommu/amd: Do not set the D bit on AMD v2 table entries
iommu/amd: Correct the reported page sizes from the V1 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- driver for Sophgo SG2042 external hardware monitor
- thermal sensor driver for Surface Aggregator Module
Added support to existing drivers:
- oxp-sensors: Support for multiple new devices.
- nct6775: Added G15CF to ASUS WMI monitoring list
Modernizations:
- driver cleanup and update to use with_info API: ina2xx, lm92,
lm95234, max1619, max1668, and max6697.
API updates:
- removed unused devm_hwmon_device_unregister() API function
Other notable changes
- implement and use generic bus access delay for pmbus drivers
- use with scoped for each OF child loop in several drivers
- module unloading fixes for gsc-hwmon and ntc_thermistor drivers
- converted various drivers to use multi-byte regmap operations
- adt7475: Improved devicetree based configuration
- ltc2947: Move to firmware agnostic API
- ltc2978: Converted devicetree description to yaml
- max16065: Addressed overflows when writing limit attributes
Various other minor cleanups, fixes and improvements"
* tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (96 commits)
hwmon: Remove devm_hwmon_device_unregister() API function
hwmon: (sch5636) Print unknown ID in error string via %*pE
hwmon: (sht21) Use %*ph to print small buffer
hwmon: (pmbus/mpq7932) Constify struct regulator_desc
hwmon: pmbus: pli12096bc: Add write delay
hwmon: pmbus: zl6100: Use generic code
hwmon: pmbus: ucd9000: Use generic code
hwmon: pmbus: max15301: Use generic code
hwmon: pmbus: Implement generic bus access delay
hwmon: (ina2xx) Use shunt voltage to calculate current
hwmon: (ina2xx) Add support for current limits
hwmon: (ina2xx) Pass register to alert limit write functions
hwmon: (ina2xx) Convert to use with_info hwmon API
hwmon: (ina2xx) Move ina2xx_get_value()
hwmon: (ina2xx) Set alert latch
hwmon: (ina2xx) Consolidate chip initialization code
hwmon: (ina2xx) Fix various overflow issues
hwmon: (ina2xx) Re-initialize chip using regmap functions
hwmon: (ina2xx) Use local regmap pointer if used more than once
hwmon: (ina2xx) Mark regmap_config as const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- lib/string_choices:
- Add str_up_down() helper (Michal Wajdeczko)
- Add str_true_false()/str_false_true() helper (Hongbo Li)
- Introduce several opposite string choice helpers (Hongbo Li)
- lib/string_helpers:
- rework overflow-dependent code (Justin Stitt)
- fortify: refactor test_fortify Makefile to fix some build problems
(Masahiro Yamada)
- string: Check for "nonstring" attribute on strscpy() arguments
- virt: vbox: Replace 1-element arrays with flexible arrays
- media: venus: hfi_cmds: Replace 1-element arrays with flexible arrays
* tag 'hardening-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add some comments to make more clear for string choices helpers.
lib/string_choices: Introduce several opposite string choice helpers
lib/string_choices: Add str_true_false()/str_false_true() helper
string: Check for "nonstring" attribute on strscpy() arguments
media: venus: hfi_cmds: struct hfi_session_release_buffer_pkt: Add __counted_by annotation
media: venus: hfi_cmds: struct hfi_session_release_buffer_pkt: Replace 1-element array with flexible array
virt: vbox: struct vmmdev_hgcm_pagelist: Replace 1-element array with flexible array
lib/string_helpers: rework overflow-dependent code
coccinelle: Add rules to find str_down_up() replacements
string_choices: Add wrapper for str_down_up()
coccinelle: Add rules to find str_up_down() replacements
lib/string_choices: Add str_up_down() helper
fortify: use if_changed_dep to record header dependency in *.cmd files
fortify: move test_fortify.sh to lib/test_fortify/
fortify: refactor test_fortify Makefile to fix some build problems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- binfmt_elf: Dump smaller VMAs first in ELF cores (Brian Mak)
- binfmt_elf: mseal address zero (Jeff Xu)
- binfmt_elf, coredump: Log the reason of the failed core dumps (Roman
Kisel)
* tag 'execve-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: mseal address zero
binfmt_elf: Dump smaller VMAs first in ELF cores
binfmt_elf, coredump: Log the reason of the failed core dumps
coredump: Standartize and fix logging
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- ramoops: Fix .rst typo (Steven Rostedt)
- pstore: replace spinlock_t by raw_spinlock_t (Wen Yang)
* tag 'pstore-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: replace spinlock_t by raw_spinlock_t
pstore/ramoops: Fix typo as there is no "reserver"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains some cleanups to the core and some mostly minor updates
to a bunch of drivers and device tree bindings. One thing worth
pointing out is that it contains an immutable branch containing
support for a new mfd chip (Analog Devices ADP5585) with several sub
drivers.
Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
Herring and Wolfram Sang for code contributions and reviews and to Lee
Jones for preparing the above mentioned immutable branch"
* tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits)
pwm: stm32: Fix a typo
dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
dt-bindings: pwm: amlogic: Add optional power-domains
pwm: Switch back to struct platform_driver::remove()
dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
pwm: axi-pwmgen: use shared macro for version reg
pwm: atmel-hlcdc: Drop trailing comma
pwm: atmel-hlcdc: Enable module autoloading
pwm: omap-dmtimer: Use of_property_read_bool()
pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled
pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()
pwm: Simplify pwm_capture()
pwm: lp3943: Use of_property_count_u32_elems() to get property length
pwm: Don't export pwm_capture()
pwm: Make info in traces about affected pwm more useful
dt-bindings: pwm: renesas,tpu: Add r8a779h0 support
dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support
pwm: adp5585: Add Analog Devices ADP5585 support
gpio: adp5585: Add Analog Devices ADP5585 support
mfd: adp5585: Add Analog Devices ADP5585 core support
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add documentation for the mmc-test driver
- Register the eMMC RPMB partition with the RPMB subsystem
- Some various cleanups
MMC host:
- dw_mmc-rockchip: Add support for the RK3576 variant
- renesas_sdhi: Add support for the RZ/V2H(P) variant
- sdhci_am654: Add a retry mechanism for tuning
- sdhci-atmel: Convert DT bindings to json schema
- sdhci-of-dwcmshc:
- Add eMMC HW reset support for BlueField-3 SoC
- Add support for the RK3576 variant
- Add support for the Sophgo SG2042 variant
- sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI
Misc/Tee:
- Add Replay Protected Memory Block (RPMB) subsystem
- Let optee probe RPMB device using RPMB subsystem"
* tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (41 commits)
mmc: core: Use dev_err_probe for deferred regulators
optee: Fix a NULL vs IS_ERR() check
mmc: sdhci_am654: Add prints to tuning algorithm
mmc: sdhci_am654: Add retry tuning
dt-bindings: mmc: Add support for rk3576 eMMC
Documentation: mmc: Add mmc-test doc
rpmb: fix error path in rpmb_dev_register()
optee: add RPMB dependency
mmc: block: add RPMB dependency
mmc: core Convert UNSTUFF_BITS macro to inline function
dt-bindings: mmc: sdhci-atmel: Convert to json schema
mmc: core: Convert simple_stroul to kstroul
mmc: core: Calculate size from pointer
mmc: cqhci: Make use of cqhci_halted() routine
mmc: core: Replace the argument of mmc_sd_switch() with defines
mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
mmc: dw_mmc-rockchip: Add internal phase support
dt-bindings: mmc: Add support for rk3576 dw-mshc
mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC
mmc: core: remove left-over data structure declarations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- No particularly important patchset this cycle, but we have a few
usual improvements: like using a better/more recent helper or
checking a return value.
Raw NAND changes:
- The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers
- a couple of exit path have been fixed (mtk, denali)
- TI GPMC bindings have been enhanced to comply with up-to-date
partition descriptions
- a load of small and misc fixes
SPI-NAND changes:
- The most impacting series this cycle is bringing support for
continuous reads in the SPI-NAND subsystem.
This is a feature already merged in the raw NAND subsystem which
allows optimizing the internal fetch times in the chip while
reading sequential pages within an eraseblock.
For now only Macronix NANDs benefit from this feature. While we are
talking about Macronix, some of their chip need an explicit action
for selecting a different plane, and support for it has also been
brought.
- The bitflip threshold has also been set to the same arbitrary level
as in the raw NAND subsystem to optimize wear leveling decisions
- Add upport for a new Winbond chip
SPI NOR changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name.
The probe path tries to access the name without checking its
existence first. S28HS256T is the first flash to define its entry
without a name, uncovering this issue"
* tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits)
mtd: spi-nor: fix flash probing
mtd: spi-nor: spansion: Add support for S28HS256T
mtd: spi-nor: winbond: add Zetta ZD25Q128C support
mtd: spi-nor: micron-st: Add n25q064a WP support
mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`
mtd: spinand: macronix: Flag parts needing explicit plane select
mtd: spinand: Add support for setting plane select bits
dt-bindings: mtd: ti, gpmc-nand: support partitions node
mtd: rawnand: mtk: Fix init error path
mtd: powernv: Add check devm_kasprintf() returned value
mtd: rawnand: mtk: Factorize out the logic cleaning mtk chips
mtd: rawnand: atmel: Add message on DMA usage
mtd: rawnand: meson: Fix typo in function name
mtd: spi-nand: macronix: Continuous read support
mtd: spi-nand: macronix: Add a possible bitflip status flag
mtd: spi-nand: macronix: Extract the bitflip retrieval logic
mtd: spi-nand: macronix: Fix helper name
mtd: spi-nand: Expose spinand_write_reg_op()
mtd: spi-nand: Add continuous read support
mtd: spi-nand: Isolate the MTD read logic in a helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon
devices
Drivers:
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
Documentation updates
Misc minor cleanups and fixes"
* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: hwmon: Fix missing temp1_max_alarm attribute
power: supply: Drop use_cnt check from power_supply_property_is_writeable()
power: supply: ab8500: Constify struct kobj_type
power: supply: max1720x: fix a double free on error in probe()
power: supply: axp20x_battery: add support for AXP717
power: supply: axp20x_usb_power: Add support for AXP717
dt-bindings: power: supply: axp20x: Add AXP717 compatible
dt-bindings: power: supply: axp20x: Add AXP717 compatible
power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
power: supply: max1720x: add read support for nvmem
mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
power: supply: core: constify psy_tzd_ops
power: reset: brcmstb: Do not go into infinite loop if reset fails
power: reset: brcmstb: Use devm_register_sys_off_handler()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's mostly refactoring and improving APIs for slab users in
the kernel, along with some debugging improvements.
- kmem_cache_create() refactoring (Christian Brauner)
Over the years have been growing new parameters to
kmem_cache_create() where most of them are needed only for a small
number of caches - most recently the rcu_freeptr_offset parameter.
To avoid adding new parameters to kmem_cache_create() and adjusting
all its callers, or creating new wrappers such as
kmem_cache_create_rcu(), we can now pass extra parameters using the
new struct kmem_cache_args. Not explicitly initialized fields
default to values interpreted as unused.
kmem_cache_create() is for now a wrapper that works both with the
new form: kmem_cache_create(name, object_size, args, flags) and the
legacy form: kmem_cache_create(name, object_size, align, flags,
ctor)
- kmem_cache_destroy() waits for kfree_rcu()'s in flight (Vlastimil
Babka, Uladislau Rezki)
Since SLOB removal, kfree() is allowed for freeing objects
allocated by kmem_cache_create(). By extension kfree_rcu() as
allowed as well, which can allow converting simple call_rcu()
callbacks that only do kmem_cache_free(), as there was never a
kmem_cache_free_rcu() variant. However, for caches that can be
destroyed e.g. on module removal, the cache owners knew to issue
rcu_barrier() first to wait for the pending call_rcu()'s, and this
is not sufficient for pending kfree_rcu()'s due to its internal
batching optimizations. Ulad has provided a new
kvfree_rcu_barrier() and to make the usage less error-prone,
kmem_cache_destroy() calls it. Additionally, destroying
SLAB_TYPESAFE_BY_RCU caches now again issues rcu_barrier()
synchronously instead of using an async work, because the past
motivation for async work no longer applies. Users of custom
call_rcu() callbacks should however keep calling rcu_barrier()
before cache destruction.
- Debugging use-after-free in SLAB_TYPESAFE_BY_RCU caches (Jann Horn)
Currently, KASAN cannot catch UAFs in such caches as it is legal to
access them within a grace period, and we only track the grace
period when trying to free the underlying slab page. The new
CONFIG_SLUB_RCU_DEBUG option changes the freeing of individual
object to be RCU-delayed, after which KASAN can poison them.
- Delayed memcg charging (Shakeel Butt)
In some cases, the memcg is uknown at allocation time, such as
receiving network packets in softirq context. With
kmem_cache_charge() these may be now charged later when the user
and its memcg is known.
- Misc fixes and improvements (Pedro Falcato, Axel Rasmussen,
Christoph Lameter, Yan Zhen, Peng Fan, Xavier)"
* tag 'slab-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm, slab: restore kerneldoc for kmem_cache_create()
io_uring: port to struct kmem_cache_args
slab: make __kmem_cache_create() static inline
slab: make kmem_cache_create_usercopy() static inline
slab: remove kmem_cache_create_rcu()
file: port to struct kmem_cache_args
slab: create kmem_cache_create() compatibility layer
slab: port KMEM_CACHE_USERCOPY() to struct kmem_cache_args
slab: port KMEM_CACHE() to struct kmem_cache_args
slab: remove rcu_freeptr_offset from struct kmem_cache
slab: pass struct kmem_cache_args to do_kmem_cache_create()
slab: pull kmem_cache_open() into do_kmem_cache_create()
slab: pass struct kmem_cache_args to create_cache()
slab: port kmem_cache_create_usercopy() to struct kmem_cache_args
slab: port kmem_cache_create_rcu() to struct kmem_cache_args
slab: port kmem_cache_create() to struct kmem_cache_args
slab: add struct kmem_cache_args
slab: s/__kmem_cache_create/do_kmem_cache_create/g
memcg: add charging of already allocated slab objects
mm/slab: Optimize the code logic in find_mergeable()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
|
Pull workqueue updates from Tejun Heo:
"Nothing major:
- workqueue.panic_on_stall boot param added
- alloc_workqueue_lockdep_map() added (used by DRM)
- Other cleanusp and doc updates"
* tag 'wq-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
kernel/workqueue.c: fix DEFINE_PER_CPU_SHARED_ALIGNED expansion
workqueue: Fix another htmldocs build warning
workqueue: fix null-ptr-deref on __alloc_workqueue() error
workqueue: Don't call va_start / va_end twice
workqueue: Fix htmldocs build warning
workqueue: Add interface for user-defined workqueue lockdep map
workqueue: Change workqueue lockdep map to pointer
workqueue: Split alloc_workqueue into internal function and lockdep init
Documentation: kernel-parameters: add workqueue.panic_on_stall
workqueue: add cmdline parameter workqueue.panic_on_stall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset isolation improvements
- cpuset cgroup1 support is split into its own file behind the new
config option CONFIG_CPUSET_V1. This makes it the second controller
which makes cgroup1 support optional after memcg
- Handling of unavailable v1 controller handling improved during
cgroup1 mount operations
- union_find applied to cpuset. It makes code simpler and more
efficient
- Reduce spurious events in pids.events
- Cleanups and other misc changes
- Contains a merge of cgroup/for-6.11-fixes to receive cpuset fixes
that further changes build upon
* tag 'cgroup-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (34 commits)
cgroup: Do not report unavailable v1 controllers in /proc/cgroups
cgroup: Disallow mounting v1 hierarchies without controller implementation
cgroup/cpuset: Expose cpuset filesystem with cpuset v1 only
cgroup/cpuset: Move cpu.h include to cpuset-internal.h
cgroup/cpuset: add sefltest for cpuset v1
cgroup/cpuset: guard cpuset-v1 code under CONFIG_CPUSETS_V1
cgroup/cpuset: rename functions shared between v1 and v2
cgroup/cpuset: move v1 interfaces to cpuset-v1.c
cgroup/cpuset: move validate_change_legacy to cpuset-v1.c
cgroup/cpuset: move legacy hotplug update to cpuset-v1.c
cgroup/cpuset: add callback_lock helper
cgroup/cpuset: move memory_spread to cpuset-v1.c
cgroup/cpuset: move relax_domain_level to cpuset-v1.c
cgroup/cpuset: move memory_pressure to cpuset-v1.c
cgroup/cpuset: move common code to cpuset-internal.h
cgroup/cpuset: introduce cpuset-v1.c
selftest/cgroup: Make test_cpuset_prs.sh deal with pre-isolated CPUs
cgroup/cpuset: Account for boot time isolated CPUs
cgroup/cpuset: remove use_parent_ecpus of cpuset
cgroup/cpuset: remove fetch_xcpus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- a new int_pow test suite
- documentation update to clarify filename best practices
- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT
- change to build compile_commands.json automatically instead of
requiring a manual build
* tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib/math: Add int_pow test suite
kunit: tool: Build compile_commands.json
kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
Documentation: KUnit: Update filename best practices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
- Use the topology information of number of packages for making the
decision about TSC trust instead of using the number of online nodes
which is not reflecting the real topology.
- Stop the PIT timer 0 when its not in use as to stop pointless
emulation in the VMM.
- Fix the PIT timer stop sequence for timer 0 so it truly stops both
real hardware and buggy VMM emulations.
* tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Check for sockets instead of CPUs to make code match comment
clockevents/drivers/i8253: Fix stop sequence for timer 0
x86/i8253: Disable PIT timer 0 when not in use
x86/tsc: Use topology_max_packages() to get package number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Thomas Gleixner:
- Rework kcpuid to handle the the autogenerated CSV file correctly and
update the CSV file to cover the whole zoo of CPUID.
- Avoid memcpy() for ia32 syscall_get_arguments() and use direct
assignments as fortified memcpy() is unhappy about writing/reading
beyond the end of the addresses destination/source struct member
- A few new PCI IDs for AMD
- Update MAINTAINERS to cover x86 specific selftests
* tag 'x86-misc-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add selftests/x86 entry
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h
x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments()
MAINTAINERS: Add x86 cpuid database entry
tools/x86/kcpuid: Introduce a complete cpuid bitfields CSV file
tools/x86/kcpuid: Parse subleaf ranges if provided
tools/x86/kcpuid: Recognize all leaves with subleaves
tools/x86/kcpuid: Strip bitfield names leading/trailing whitespace
tools/x86/kcpuid: Protect against faulty "max subleaf" values
tools/x86/kcpuid: Set max possible subleaves count to 64
tools/x86/kcpuid: Properly align long-description columns
tools/x86/kcpuid: Remove unused variable
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 memory management updates from Thomas Gleixner:
- Make LAM enablement safe vs. kernel threads using a process mm
temporarily as switching back to the process would not update CR3 and
therefore not enable LAM causing faults in user space when using
tagged pointers. Cure it by synchronizing LAM enablement via IPIs to
all CPUs which use the related mm.
- Cure a LAM harmless inconsistency between CR3 and the state during
context switch. It's both confusing and prone to lead to real bugs
- Handle alt stack handling for threads which run with a non-zero
protection key. The non-zero key prevents the kernel to access the
alternate stack. Cure it by temporarily enabling all protection keys
for the alternate stack setup/restore operations.
- Provide a EFI config table identity mapping for kexec kernel to
prevent kexec fails because the new kernel cannot access the config
table array
- Use GB pages only when a full GB is mapped in the identity map as
otherwise the CPU can speculate into reserved areas after the end of
memory which causes malfunction on UV systems.
- Remove the noisy and pointless SRAT table dump during boot
- Use is_ioremap_addr() for iounmap() address range checks instead of
high_memory. is_ioremap_addr() is more precise.
* tag 'x86-mm-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Improve iounmap() address range checks
x86/mm: Remove duplicate check from build_cr3()
x86/mm: Remove unused NX related declarations
x86/mm: Remove unused CR3_HW_ASID_BITS
x86/mm: Don't print out SRAT table information
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
x86/kexec: Add EFI config table identity mapping for kexec kernel
selftests/mm: Add new testcases for pkeys
x86/pkeys: Restore altstack access in sigreturn()
x86/pkeys: Update PKRU to enable all pkeys before XSAVE
x86/pkeys: Add helper functions to update PKRU on the sigframe
x86/pkeys: Add PKRU as a parameter in signal handling functions
x86/mm: Cleanup prctl_enable_tagged_addr() nr_bits error checking
x86/mm: Fix LAM inconsistency during context switch
x86/mm: Use IPIs to synchronize LAM enablement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Provide FPU buffer layout in core dumps:
Debuggers have guess the FPU buffer layout in core dumps, which is
error prone. This is because AMD and Intel layouts differ.
To avoid buggy heuristics add a ELF section which describes the buffer
layout which can be retrieved by tools"
* tag 'x86-fpu-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/elf: Add a new FPU buffer layout info to x86 core files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core update from Thomas Gleixner:
"Enable UBSAN traps for x86, which provides better reporting through
metadata encodeded into UD1"
* tag 'x86-core-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Enable UBSAN traps on x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all cleanup work of various kinds, while the
diffstat for the core is quite large this is almost all cleanups and
documentation improvments with some small fixes rather than any new
feature work. We do have support for a couple of new devices but these
are small additions to existing drivers rather than new drivers.
- Removal of the SM5703 driver which does not have it's dependencies
available.
- Support for Allwinner AXP717, and Qualcomm WCN6855.
The Allwinner support shares some commits with the MFD tree"
* tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (66 commits)
regulator: sm5703: Remove because it is unused and fails to build
regulator: Split up _regulator_get()
regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
regulator: max8973: Use irq_get_trigger_type() helper
regulator: core: fix the broken behavior of regulator_dev_lookup()
regulator: max77650: Use container_of and constify static data
regulator: hi6421v530: Use container_of and constify static data
regulator: hi6421v530: Drop unused 'eco_microamp'
regulator: qcom-refgen: Constify static data
regulator: pfuze100: Constify static data
regulator: pcap: Constify static data
regulator: mtk-dvfsrc: Constify static data
regulator: max77826: Constify static data
regulator: max77826: Drop unused 'rdesc' in 'struct max77826_regulator_info'
regulator: tps65023: Constify static data
regulator: hi6421v600: Constify static data
regulator: hi6421: Constify static data
regulator: da9121: Constify static data
regulator: da9063: Constify static data
regulator: da9055: Constify static data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main update here is Matti's work allowing regmap irqdomains to be
given custom names (allowing multiple interrupt controllers associatd
with a single struct device), this pulls in some commits from Thomas'
tree which it depends on.
Otherwise there's a bit of work on improving handling of regmaps
protected with spinlocks when used with complex cache types, fixing
some valid but harmless lockdep reports seen with some new driver
work"
* tag 'regmap-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add coverage of spinlocked regmaps
regcache: use map->alloc_flags also for allocating cache
regmap: Use locking during kunit tests
regmap: Hold the regmap lock when allocating and freeing the cache
regmap: Allow setting IRQ domain name suffix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"This is the "last" part of the support for the new nbcon consoles.
Where "nbcon" stays for "No Big console lock CONsoles" aka not under
the console_lock.
New callbacks are added to struct console:
- write_thread() for flushing nbcon consoles in task context.
- write_atomic() for flushing nbcon consoles in atomic context,
including NMI.
- con->device_lock() and device_unlock() for taking the driver
specific lock, for example, port->lock.
New printk-specific kthreads are created:
- per-console kthreads which get responsible for flushing normal
priority messages on nbcon consoles.
- thread which gets responsible for flushing normal priority messages
on all consoles when CONFIG_RT enabled.
The new callbacks are called under a special per-console lock which
has already been added back in v6.7. It allows to distinguish three
severities: normal, emergency, and panic. A context with a higher
priority could take over the ownership when it is safe even in the
middle of handling a record. The panic context could do it even when
it is not safe. But it is allowed only for the final desperate flush
before entering the infinite loop.
The new lock helps to flush the messages directly in emergency and
panic contexts. But it is not enough in all situations:
- console_lock() is still need for synchronization against boot
consoles.
- con->device_lock() is need for synchronization against other
operations on the same HW, e.g. serial port speed setting,
non-printk related read/write.
The dependency on con->device_lock() is mutual. Any code taking the
driver specific lock has to acquire the related nbcon console context
as well. For example, see the new uart_port_lock() API. It provides
the necessary synchronization against emergency and panic contexts
where the messages are flushed only under the new per-console lock.
Maybe surprisingly, a quite tricky part is the decision how to flush
the consoles in various situations. It has to take into account:
- message priority: normal, emergency, panic
- scheduling context: task, atomic, deferred_legacy
- registered consoles: boot, legacy, nbcon
- threads are running: early boot, suspend, shutdown, panic
- caller: printk(), pr_flush(), printk_flush_in_panic(),
console_unlock(), console_start(), ...
The primary decision is made in printk_get_console_flush_type(). It
creates a hint what the caller should do:
- flush nbcon consoles directly or via the kthread
- call the legacy loop (console_unlock()) directly or via irq_work
The existing behavior is preserved for the legacy consoles. The only
exception is that they are not longer flushed directly from printk()
in panic() before CPUs are stopped. But this blocking happens only
when at least one nbcon console is registered. The motivation is to
increase a chance to produce the crash dump. They legacy consoles
might create a deadlock in compare with nbcon consoles. The nbcon
console should allow to see the messages even when the crash dump
fails.
There are three possible ways how nbcon consoles are flushed:
- The per-nbcon-console kthread is responsible for flushing messages
added with the normal priority. This is the default mode.
- The legacy loop, aka console_unlock(), is used when there is still
a boot console registered. There is no easy way how to match an
early console driver with a nbcon console driver. And the
console_lock() provides the only reliable serialization at the
moment.
The legacy loop uses either con->write_atomic() or
con->write_thread() callbacks depending on whether it is allowed to
schedule. The atomic variant has to be used from printk().
- In other situations, the messages are flushed directly using
write_atomic() which can be called in any context, including NMI.
It is primary needed during early boot or shutdown, in emergency
situations, and panic.
The emergency priority is used by a code called within
nbcon_cpu_emergency_enter()/exit(). At the moment, it is used in four
situations: WARN(), Oops, lockdep, and RCU stall reports.
Finally, there is no nbcon console at the moment. It means that the
changes should _not_ modify the existing behavior. The only exception
is CONFIG_RT which would force offloading the legacy loop, for normal
priority context, into the dedicated kthread"
* tag 'printk-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (54 commits)
printk: Avoid false positive lockdep report for legacy printing
printk: nbcon: Assign nice -20 for printing threads
printk: Implement legacy printer kthread for PREEMPT_RT
tty: sysfs: Add nbcon support for 'active'
proc: Add nbcon support for /proc/consoles
proc: consoles: Add notation to c_start/c_stop
printk: nbcon: Show replay message on takeover
printk: Provide helper for message prepending
printk: nbcon: Rely on kthreads for normal operation
printk: nbcon: Use thread callback if in task context for legacy
printk: nbcon: Relocate nbcon_atomic_emit_one()
printk: nbcon: Introduce printer kthreads
printk: nbcon: Init @nbcon_seq to highest possible
printk: nbcon: Add context to usable() and emit()
printk: Flush console on unregister_console()
printk: Fail pr_flush() if before SYSTEM_SCHEDULING
printk: nbcon: Add function for printers to reacquire ownership
printk: nbcon: Use raw_cpu_ptr() instead of open coding
printk: Use the BITS_PER_LONG macro
lockdep: Mark emergency sections in lockdep splats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
- Prepare the core for supporting parallel hotplug on loongarch
- A small set of cleanups and enhancements
* tag 'smp-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Mark smp_prepare_boot_cpu() __init
cpu: Fix W=1 build kernel-doc warning
cpu/hotplug: Provide weak fallback for arch_cpuhp_init_parallel_bringup()
cpu/hotplug: Make HOTPLUG_PARALLEL independent of HOTPLUG_SMT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM framework to static calls
This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.
- Add the Integrity Policy Enforcement (IPE) LSM
This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.
Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.
- Move the lifecycle management of the LSM blobs to the LSM framework
Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.
Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.
- Fix problems with the LSM's handling of F_SETOWN
The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.
- Fix potential problems with the security_inode_free() LSM hook
Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.
Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.
- Refactor two LSM hooks to better fit the LSM return value patterns
The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.
- Various cleanups and improvements
A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.
* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
|
|
Pull io_uring async discard support from Jens Axboe:
"Sitting on top of both the 6.12 block and io_uring core branches,
here's support for async discard through io_uring.
This allows applications to issue async discards, rather than rely on
the blocking sync ioctl discards we already have. The sync support is
difficult to use outside of idle/cleanup periods.
On a real (but slow) device, testing shows the following results when
compared to sync discard:
qd64 sync discard: 21K IOPS, lat avg 3 msec (max 21 msec)
qd64 async discard: 76K IOPS, lat avg 845 usec (max 2.2 msec)
qd64 sync discard: 14K IOPS, lat avg 5 msec (max 25 msec)
qd64 async discard: 56K IOPS, lat avg 1153 usec (max 3.6 msec)
and synthetic null_blk testing with the same queue depth and block
size settings as above shows:
Type Trim size IOPS Lat avg (usec) Lat Max (usec)
==============================================================
sync 4k 144K 444 20314
async 4k 1353K 47 595
sync 1M 56K 1136 21031
async 1M 94K 680 760"
* tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux:
block: implement async io_uring discard cmd
block: introduce blk_validate_byte_range()
filemap: introduce filemap_invalidate_pages
io_uring/cmd: give inline space in request to cmds
io_uring/cmd: expose iowq to cmds
|
|
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
|
|
Pull io_uring updates from Jens Axboe:
- NAPI fixes and cleanups (Pavel, Olivier)
- Add support for absolute timeouts (Pavel)
- Fixes for io-wq/sqpoll affinities (Felix)
- Efficiency improvements for dealing with huge pages (Chenliang)
- Support for a minwait mode, where the application essentially has two
timouts - one smaller one that defines the batch timeout, and the
overall large one similar to what we had before. This enables
efficient use of batching based on count + timeout, while still
working well with periods of less intensive workloads
- Use ITER_UBUF for single segment sends
- Add support for incremental buffer consumption. Right now each
operation will always consume a full buffer. With incremental
consumption, a recv/read operation only consumes the part of the
buffer that it needs to satisfy the operation
- Add support for GCOV for io_uring, to help retain a high coverage of
test to code ratio
- Fix regression with ocfs2, where an odd -EOPNOTSUPP wasn't correctly
converted to a blocking retry
- Add support for cloning registered buffers from one ring to another
- Misc cleanups (Anuj, me)
* tag 'for-6.12/io_uring-20240913' of git://git.kernel.dk/linux: (35 commits)
io_uring: add IORING_REGISTER_COPY_BUFFERS method
io_uring/register: provide helper to get io_ring_ctx from 'fd'
io_uring/rsrc: add reference count to struct io_mapped_ubuf
io_uring/rsrc: clear 'slot' entry upfront
io_uring/io-wq: inherit cpuset of cgroup in io worker
io_uring/io-wq: do not allow pinning outside of cpuset
io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
io_uring/sqpoll: do not allow pinning outside of cpuset
io_uring/eventfd: move refs to refcount_t
io_uring: remove unused rsrc_put_fn
io_uring: add new line after variable declaration
io_uring: add GCOV_PROFILE_URING Kconfig option
io_uring/kbuf: add support for incremental buffer consumption
io_uring/kbuf: pass in 'len' argument for buffer commit
Revert "io_uring: Require zeroed sqe->len on provided-buffers send"
io_uring/kbuf: move io_ring_head_to_buf() to kbuf.h
io_uring/kbuf: add io_kbuf_commit() helper
io_uring/kbuf: shrink nr_iovs/mode in struct buf_sel_arg
io_uring: wire up min batch wake timeout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings mostly refactoring, cleanups, minor performance
optimizations and usual fixes. The folio API conversions are most
noticeable.
There's one less visible change that could have a high impact. The
extent lock scope for read is reduced, not held for the entire
operation. In the buffered read case it's left to page or inode lock,
some direct io read synchronization is still needed.
This used to prevent deadlocks induced by page faults during direct
io, so there was a 4K limitation on the requests, e.g. for io_uring.
In the future this will allow smoother integration with iomap where
the extent read lock was a major obstacle.
User visible changes:
- the FSTRIM ioctl updates the processed range even after an error or
interruption
- cleaner thread is woken up in SYNC ioctl instead of waking the
transaction thread that can take some delay before waking up the
cleaner, this can speed up cleaning of deleted subvolumes
- print an error message when opening a device fail, e.g. when it's
unexpectedly read-only
Core changes:
- improved extent map handling in various ways (locking, iteration, ...)
- new assertions and locking annotations
- raid-stripe-tree locking fixes
- use xarray for tracking dirty qgroup extents, switched from rb-tree
- turn the subpage test to compile-time condition if possible (e.g.
on x86_64 with 4K pages), this allows to skip a lot of ifs and
remove dead code
- more preparatory work for compression in subpage mode
Cleanups and refactoring
- folio API conversions, many simple cases where page is passed so
switch it to folios
- more subpage code refactoring, update page state bitmap processing
- introduce auto free for btrfs_path structure, use for the simple
cases"
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: only unlock the to-be-submitted ranges inside a folio
btrfs: merge btrfs_folio_unlock_writer() into btrfs_folio_end_writer_lock()
btrfs: BTRFS_PATH_AUTO_FREE in orphan.c
btrfs: use btrfs_path auto free in zoned.c
btrfs: DEFINE_FREE for struct btrfs_path
btrfs: remove btrfs_folio_end_all_writers()
btrfs: constify more pointer parameters
btrfs: rework BTRFS_I as macro to preserve parameter const
btrfs: add and use helper to verify the calling task has locked the inode
btrfs: always update fstrim_range on failure in FITRIM ioctl
btrfs: convert copy_inline_to_page() to use folio
btrfs: convert btrfs_decompress() to take a folio
btrfs: convert zstd_decompress() to take a folio
btrfs: convert lzo_decompress() to take a folio
btrfs: convert zlib_decompress() to take a folio
btrfs: convert try_release_extent_mapping() to take a folio
btrfs: convert try_release_extent_state() to take a folio
btrfs: convert submit_eb_page() to take a folio
btrfs: convert submit_eb_subpage() to take a folio
btrfs: convert read_key_bytes() to take a folio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"Recently, we added the ability to list mounts in other mount
namespaces and the ability to retrieve namespace file descriptors
without having to go through procfs by deriving them from pidfds.
This extends nsfs in two ways:
(1) Add the ability to retrieve information about a mount namespace
via NS_MNT_GET_INFO.
This will return the mount namespace id and the number of mounts
currently in the mount namespace. The number of mounts can be
used to size the buffer that needs to be used for listmount() and
is in general useful without having to actually iterate through
all the mounts.
The structure is extensible.
(2) Add the ability to iterate through all mount namespaces over
which the caller holds privilege returning the file descriptor
for the next or previous mount namespace.
To retrieve a mount namespace the caller must be privileged wrt
to it's owning user namespace. This means that PID 1 on the host
can list all mounts in all mount namespaces or that a container
can list all mounts of its nested containers.
Optionally pass a structure for NS_MNT_GET_INFO with
NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount
namespace in one go.
(1) and (2) can be implemented for other namespace types easily.
Together with recent api additions this means one can iterate through
all mounts in all mount namespaces without ever touching procfs.
The commit message in 49224a345c48 ('Merge patch series "nsfs: iterate
through mount namespaces"') contains example code how to do this"
* tag 'vfs-6.12.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: iterate through mount namespaces
file: add fput() cleanup helper
fs: add put_mnt_ns() cleanup helper
fs: allow mount namespace fd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
