| Age | Commit message (Collapse) | Author |
|---|
|
Toke mentioned unrcu_pointer() existence, allowing
to remove some of the ugly casts we have when using
xchg() for rcu protected pointers.
Also make inet_rcv_compat const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In function deferred_init_memmap(), we call
deferred_init_mem_pfn_range_in_zone() to get the next deferred_init_pfn.
But we always search it from the very beginning.
Since we save the index in i, we can leverage this to search from i next
time.
[rppt refine the comment]
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/all/20240605071339.15330-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Add back HW-GRO to the reported features.
As the current implementation of HW-GRO uses KSMs with a
specific fixed buffer size (256B) to map its headers buffer,
we reported the feature only if the NIC is supporting KSM and
the minimum value for buffer size is below the requested one.
iperf3 bandwidth comparison:
+---------+--------+--------+-----------+
| streams | SW GRO | HW GRO | Unit |
|---------+--------+--------+-----------|
| 1 | 36 | 42 | Gbits/sec |
| 4 | 34 | 39 | Gbits/sec |
| 8 | 31 | 35 | Gbits/sec |
+---------+--------+--------+-----------+
A downstream patch will add skb fragment coalescing which will improve
performance considerably.
Benchmark details:
VM based setup
CPU: Intel(R) Xeon(R) Platinum 8380 CPU, 24 cores
NIC: ConnectX-7 100GbE
iperf3 and irq running on same CPU over a single receive queue
Signed-off-by: Yoray Zack <yorayz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240603212219.1037656-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSM Mkey is KLM Mkey with a fixed buffer size. Due to this fact,
it is a faster mechanism than KLM.
SHAMPO feature used KLMs Mkeys for memory mappings of its headers buffer.
As it used KLMs with the same buffer size for each entry,
we can use KSMs instead.
This commit changes the Mkeys that map the SHAMPO headers buffer
from KLMs to KSMs.
Signed-off-by: Yoray Zack <yorayz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240603212219.1037656-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We normally ksm_zero_pages++ in ksmd when page is merged with zero page,
but ksm_zero_pages-- is done from page tables side, where there is no any
accessing protection of ksm_zero_pages.
So we can read very exceptional value of ksm_zero_pages in rare cases,
such as -1, which is very confusing to users.
Fix it by changing to use atomic_long_t, and the same case with the
mm->ksm_zero_pages.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-2-34bb358fdc13@linux.dev
Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM")
Fixes: 6080d19f0704 ("ksm: add ksm zero pages for each process")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
if CONFIG_SYSFS is not enabled in config, we get the below error,
All errors (new ones prefixed by >>):
s390-linux-ld: mm/memory.o: in function `count_mthp_stat':
>> include/linux/huge_mm.h:285:(.text+0x191c): undefined reference to `mthp_stats'
s390-linux-ld: mm/huge_memory.o:(.rodata+0x10): undefined reference to `mthp_stats'
vim +285 include/linux/huge_mm.h
279
280 static inline void count_mthp_stat(int order, enum mthp_stat_item item)
281 {
282 if (order <= 0 || order > PMD_ORDER)
283 return;
284
> 285 this_cpu_inc(mthp_stats.stats[order][item]);
286 }
287
Link: https://lkml.kernel.org/r/20240523210045.40444-1-21cnbao@gmail.com
Fixes: ec33687c6749 ("mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405231728.tCAogiSI-lkp@intel.com/
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback'
are confusing with an 'anon_' prefix, since the shmem can swap out
non-anonymous pages. So drop the 'anon_' prefix to keep consistent with
the old swap counter names.
This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the
field.
Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com
Fixes: d0f048ac39f6 ("mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters")
Fixes: 42248b9d34ea ("mm: add docs for per-order mTHP counters and transhuge_page ABI")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the ACPI EC and AC drivers, the ACPI APEI error injection
driver and build issues related to the dev_is_pnp() macro referring to
pnp_bus_type that is not exported to modules.
Specifics:
- Fix error handling during EC operation region accesses in the ACPI
EC driver (Armin Wolf)
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams)
- Fix build failures related to the dev_is_pnp() macro by redefining
it as a proper function and exporting it to modules as appropriate
and unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko)
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh)"
* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: AC: Properly notify powermanagement core about changes
PNP: Hide pnp_bus_type from the non-PNP code
PNP: Make dev_is_pnp() to be a function and export it for modules
ACPI: EC: Avoid returning AE_OK on errors in address space handler
ACPI: EC: Abort address space access upon error
ACPI: APEI: EINJ: Fix einj_dev release leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
|
|
No users after do_readlinkat started doing the job on its own.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240604155257.109500-3-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
define new gfx12 uapi flags
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use preempt_model_preemptible() to detect a preemptible kernel when
deciding whether or not to reschedule in order to drop a contended
spinlock or rwlock. Because PREEMPT_DYNAMIC selects PREEMPTION, kernels
built with PREEMPT_DYNAMIC=y will yield contended locks even if the live
preemption model is "none" or "voluntary". In short, make kernels with
dynamically selected models behave the same as kernels with statically
selected models.
Somewhat counter-intuitively, NOT yielding a lock can provide better
latency for the relevant tasks/processes. E.g. KVM x86's mmu_lock, a
rwlock, is often contended between an invalidation event (takes mmu_lock
for write) and a vCPU servicing a guest page fault (takes mmu_lock for
read). For _some_ setups, letting the invalidation task complete even
if there is mmu_lock contention provides lower latency for *all* tasks,
i.e. the invalidation completes sooner *and* the vCPU services the guest
page fault sooner.
But even KVM's mmu_lock behavior isn't uniform, e.g. the "best" behavior
can vary depending on the host VMM, the guest workload, the number of
vCPUs, the number of pCPUs in the host, why there is lock contention, etc.
In other words, simply deleting the CONFIG_PREEMPTION guard (or doing the
opposite and removing contention yielding entirely) needs to come with a
big pile of data proving that changing the status quo is a net positive.
Opportunistically document this side effect of preempt=full, as yielding
contended spinlocks can have significant, user-visible impact.
Fixes: c597bfddc9e9 ("sched: Provide Kconfig support for default dynamic preempt mode")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/kvm/ef81ff36-64bb-4cfe-ae9b-e3acf47bff24@proxmox.com
|
|
Move the declarations and inlined implementations of the preempt_model_*()
helpers to preempt.h so that they can be referenced in spinlock.h without
creating a potential circular dependency between spinlock.h and sched.h.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ankur Arora <ankur.a.arora@oracle.com>
Link: https://lkml.kernel.org/r/20240528003521.979836-2-ankur.a.arora@oracle.com
|
|
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.
Fixes: ad8110706f38 ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
|
|
Add KVM_CAP_X86_APIC_BUS_CYCLES_NS capability to configure the APIC
bus clock frequency for APIC timer emulation.
Allow KVM_ENABLE_CAPABILITY(KVM_CAP_X86_APIC_BUS_CYCLES_NS) to set the
frequency in nanoseconds. When using this capability, the user space
VMM should configure CPUID leaf 0x15 to advertise the frequency.
Vishal reported that the TDX guest kernel expects a 25MHz APIC bus
frequency but ends up getting interrupts at a significantly higher rate.
The TDX architecture hard-codes the core crystal clock frequency to
25MHz and mandates exposing it via CPUID leaf 0x15. The TDX architecture
does not allow the VMM to override the value.
In addition, per Intel SDM:
"The APIC timer frequency will be the processor’s bus clock or core
crystal clock frequency (when TSC/core crystal clock ratio is
enumerated in CPUID leaf 0x15) divided by the value specified in
the divide configuration register."
The resulting 25MHz APIC bus frequency conflicts with the KVM hardcoded
APIC bus frequency of 1GHz.
The KVM doesn't enumerate CPUID leaf 0x15 to the guest unless the user
space VMM sets it using KVM_SET_CPUID. If the CPUID leaf 0x15 is
enumerated, the guest kernel uses it as the APIC bus frequency. If not,
the guest kernel measures the frequency based on other known timers like
the ACPI timer or the legacy PIT. As reported by Vishal the TDX guest
kernel expects a 25MHz timer frequency but gets timer interrupt more
frequently due to the 1GHz frequency used by KVM.
To ensure that the guest doesn't have a conflicting view of the APIC bus
frequency, allow the userspace to tell KVM to use the same frequency that
TDX mandates instead of the default 1Ghz.
Reported-by: Vishal Annapurve <vannapurve@google.com>
Closes: https://lore.kernel.org/lkml/20231006011255.4163884-1-vannapurve@google.com
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/6748a4c12269e756f0c48680da8ccc5367c31ce7.1714081726.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Adding a sysctl knob to allow user to specify a default
rto_min at socket init time, other than using the hard
coded 200ms default rto_min.
Note that the rto_min route option has the highest precedence
for configuring this setting, followed by the TCP_BPF_RTO_MIN
socket option, followed by the tcp_rto_min_us sysctl.
Signed-off-by: Kevin Yang <yyd@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jaroslav reports Dell's OMSA Systems Management Data Engine
expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo()
and inet_dump_ifaddr(). We already added a similar fix previously in
commit 460b0d33cf10 ("inet: bring NLM_DONE out to a separate recv() again")
Instead of modifying all the dump handlers, and making them look
different than modern for_each_netdev_dump()-based dump handlers -
put the workaround in rtnetlink code. This will also help us move
the custom rtnl-locking from af_netlink in the future (in net-next).
Note that this change is not touching rtnl_dump_all(). rtnl_dump_all()
is different kettle of fish and a potential problem. We now mix families
in a single recvmsg(), but NLM_DONE is not coalesced.
Tested:
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \
--dump getaddr --json '{"ifa-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \
--dump getlink
Fixes: 3e41af90767d ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()")
Fixes: cdb2f80f1c10 ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devicetree binding document and related header file for
Amlogic A4 secure power domains.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240529-a4_secpowerdomain-v2-1-47502fc0eaf3@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
"struct devlink_dpipe_table_ops" only contains some function pointers.
Update "struct devlink_dpipe_table" and the 'table_ops' parameter of
devl_dpipe_table_register() so that structures in drivers can be
constified.
Constifying these structures will move some data to a read-only section, so
increase overall security.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_heap_allocation_data defines the UAPI as follows:
struct dma_heap_allocation_data {
__u64 len;
__u32 fd;
__u32 fd_flags;
__u64 heap_flags;
};
However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
|
|
'cfpktq' has been unused since
commit 73d6ac633c6c ("caif: code cleanup").
'caif_packet_funcs' is declared but never defined.
Remove both of them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.
Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.
When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
No functional change.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Upgrade EC_CMD_GET_NEXT_EVENT to version 3.
The max supported version will be v3. So, we speak v3 even if the EC
says it supports v4+.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Link: https://lore.kernel.org/r/20240604230837.2878737-1-dnojiri@chromium.org
[tzungbi: uint32_t -> u32 per suggested by checkpatch.pl]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Add struct ec_response_get_next_event_v3 to upgrade
EC_CMD_GET_NEXT_EVENT to version 3.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Link: https://lore.kernel.org/r/20240604170552.2517189-1-dnojiri@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Recently, ufs-mcq feature has been introduced to QEMU hw/ufs device [1].
This patch adds MCQ support for upstream QEMU UFS PCI controller. This
patch provides mandatory vops callbacks to make UFS controller work
properly on MCQ mode. Operation and Runtime Config register stride is
fixed to 48bytes which is implemented by qemu.
[1] https://lore.kernel.org/qemu-devel/cover.1716876237.git.jeuk20.kim@samsung.com/
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240531212244.1593535-2-minwoo.im@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, adis library allows configuration only for edge interrupts,
needed for data ready sampling.
This patch removes the restriction for level interrupts for devices
which have FIFO support.
Furthermore, in case of devices which have FIFO support,
devm_request_threaded_irq is used for interrupt allocation, to avoid
flooding the processor with the FIFO watermark level interrupt, which
is active until enough data has been read from the FIFO.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-7-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new API called devm_adis_setup_buffer_and_trigger_with_attrs() which
also takes buffer attributes as a parameter.
Rewrite devm_adis_setup_buffer_and_trigger() implementation such that it
calls devm_adis_setup_buffer_and_trigger_with_attrs() with buffer
attributes parameter NULL
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Link: https://lore.kernel.org/r/20240527142618.275897-4-ramona.bolboaca13@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds new fields to the iio_channel structure to support multiple
scan types per channel. This is useful for devices that support multiple
resolution modes or other modes that require different data formats of
the raw data.
To make use of this, drivers need to implement the new callback
get_current_scan_type() to resolve the scan type for a given channel
based on the current state of the driver. There is a new scan_type_ext
field in the iio_channel structure that should be used to store the
scan types for any channel that has more than one. There is also a new
flag has_ext_scan_type that acts as a type discriminator for the
scan_type/ext_scan_type union. A union is used so that we don't grow
the size of the iio_channel structure and also makes it clear that
scan_type and ext_scan_type are mutually exclusive.
The buffer code is the only code in the IIO core code that is using the
scan_type field. This patch updates the buffer code to use the new
iio_channel_validate_scan_type() function to ensure it is returning the
correct scan type for the current state of the device when reading the
sysfs attributes. The buffer validation code is also update to validate
any additional scan types that are set in the scan_type_ext field. Part
of that code is refactored to a new function to avoid duplication.
Some userspace tools may need to be updated to re-read the scan type
after writing any other attribute. During testing, we noticed that we
had to restart iiod to get it to re-read the scan type after enabling
oversampling on the ad7380 driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-3-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This gives the channel scan_type a named type so that it can be used
to simplify code in later commits.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240530-iio-add-support-for-multiple-scan-types-v3-1-cbc4acea2cfa@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
While the experiment did reveal that there are additional places that are
missing the lock during secondary bus reset, one of the places that needs
to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep
annotation.
Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is
currently dependent on the fact that the device_lock() is marked
lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that
annotation, pci_bus_lock() would need to use something like a new
pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the
topology, and a hope that the depth of a PCI tree never exceeds the max
value for a lockdep subclass.
The alternative to ripping out the lockdep coverage would be to deploy a
dynamic lock key for every PCI device. Unfortunately, there is evidence
that increasing the number of keys that lockdep needs to track to be
per-PCI-device is prohibitively expensive for something like the
cfg_access_lock.
The main motivation for adding the annotation in the first place was to
catch unlocked secondary bus resets, not necessarily catch lock ordering
problems between cfg_access_lock and other locks. Solve that narrower
problem with follow-on patches, and just due to targeted revert for now.
Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com
Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
|
|
There are a few of_node related APIs defined in the driver core.
Group the respective declarations and definitions in the header.
There is no functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240531145129.1506733-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First of all, there is no user for the platform data in the kernel.
Second, it needs a lot of updates to follow the modern standards
of the kernel, including proper Device Tree bindings and device
property handling.
For now, just hide the legacy platform data in the driver's code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added functions that can be called by a fgraph_ops entryfunc and retfunc to
store state between the entry of the function being traced to the exit of
the same function. The fgraph_ops entryfunc() may call
fgraph_reserve_data() to store up to 32 words onto the task's shadow
ret_stack and this then can be retrieved by fgraph_retrieve_data() called
by the corresponding retfunc().
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509109089.162236.11372474169781184034.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.959703050@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The use of the task->trace_recursion for the logic used for the function
graph no-trace was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use
that instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509107907.162236.6564679266777519065.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.796709456@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The use of the task->trace_recursion for the logic used for the function
graph depth was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509106728.162236.2398372644430125344.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.634870264@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The use of the task->trace_recursion for the logic used for the
set_graph_function was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509105520.162236.10339831553995971290.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.472955399@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a "task variables" array on the tasks shadow ret_stack that is the
size of longs for each possible registered fgraph_ops. That's a total
of 16, taking up 8 * 16 = 128 bytes (out of a page size 4k).
This will allow for fgraph_ops to do specific features on a per task basis
having a way to maintain state for each task.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509104383.162236.12239656156685718550.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.308806126@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that the function_graph has a main callback that handles the function
graph subops tracing, it no longer honors the pid filtering of ftrace. Add
back this logic in the function_graph code to update the gops callback for
the entry function to test if it should trace the current task or not.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.991720703@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Allow for instances to have their own ftrace_ops part of the fgraph_ops
that makes the funtion_graph tracer filter on the set_ftrace_filter file
of the instance and not the top instance.
This uses the new ftrace_startup_subops(), by using graph_ops as the
"manager ops" that defines the callback function and adds the functions
defined by the filters of the ops for each trace instance. The callback
defined by the manager ops will call the registered fgraph ops that were
added to the fgraph_array.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509102088.162236.15758883237657317789.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.832946261@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The subops filters use a "manager" ops to enable and disable its filters.
The manager ops can handle more than one subops, and its filter is what
controls what functions get set. Add a ftrace_hash_move_and_update_subops()
function that will update the manager ops when the subops filters change.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.673932251@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There are cases where a single system will use a single function callback
to handle multiple users. For example, to allow function_graph tracer to
have multiple users where each can trace their own set of functions, it is
useful to only have one ftrace_ops registered to ftrace that will call a
function by the function_graph tracer to handle the multiplexing with the
different registered function_graph tracers.
Add a "subop_list" to the ftrace_ops that will hold a list of other
ftrace_ops that the top ftrace_ops will manage.
The function ftrace_startup_subops() that takes the manager ftrace_ops and
a subop ftrace_ops it will manage. If there are no subops with the
ftrace_ops yet, it will copy the ftrace_ops subop filters to the manager
ftrace_ops and register that with ftrace_startup(), and adds the subop to
its subop_list. If the manager ops already has something registered, it
will then merge the new subop filters with what it has and enable the new
functions that covers all the subops it has.
To remove a subop, ftrace_shutdown_subops() is called which will use the
subop_list of the manager ops to rebuild all the functions it needs to
trace, and update the ftrace records to only call the functions it now has
registered. If there are no more functions registered, it will then call
ftrace_shutdown() to disable itself completely.
Note, it is up to the manager ops callback to always make sure that the
subops callbacks are called if its filter matches, as there are times in
the update where the callback could be calling more functions than those
that are currently registered.
This could be updated to handle other systems other than function_graph,
for example, fprobes could use this (but will need an interface to call
ftrace_startup_subops()).
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.508431129@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Some of the flags for ftrace_startup() may be exposed even when
CONFIG_DYNAMIC_FTRACE is not configured in. This is fine as the difference
between dynamic ftrace and static ftrace is done within the internals of
ftrace itself. No need to have use cases fail to compile because dynamic
ftrace is disabled.
This change is needed to move some of the logic of what is passed to
ftrace_startup() out of the parameters of ftrace_startup().
Link: https://lore.kernel.org/linux-trace-kernel/171509100890.162236.4362350342549122222.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.350654104@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that function graph tracing can handle more than one user, allow it to
be enabled in the ftrace instances. Note, the filtering of the functions is
still joined by the top level set_ftrace_filter and friends, as well as the
graph and nograph files.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509099743.162236.1699959255446248163.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.190630762@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pass the fgraph_ops structure to the function graph callbacks. This will
allow callbacks to add a descriptor to a fgraph_ops private field that wil
be added in the future and use it for the callbacks. This will be useful
when more than one callback can be registered to the function graph tracer.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509098588.162236.4787930115997357578.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.035147698@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Allow for multiple users to attach to function graph tracer at the same
time. Only 16 simultaneous users can attach to the tracer. This is because
there's an array that stores the pointers to the attached fgraph_ops. When
a function being traced is entered, each of the ftrace_ops entryfunc is
called and if it returns non zero, its index into the array will be added
to the shadow stack.
On exit of the function being traced, the shadow stack will contain the
indexes of the ftrace_ops on the array that want their retfunc to be
called.
Because a function may sleep for a long time (if a task sleeps itself),
the return of the function may be literally days later. If the ftrace_ops
is removed, its place on the array is replaced with a ftrace_ops that
contains the stub functions and that will be called when the function
finally returns.
If another ftrace_ops is added that happens to get the same index into the
array, its return function may be called. But that's actually the way
things current work with the old function graph tracer. If one tracer is
removed and another is added, the new one will get the return calls of the
function traced by the previous one, thus this is not a regression. This
can be fixed by adding a counter to each time the array item is updated and
save that on the shadow stack as well, such that it won't be called if the
index saved does not match the index on the array.
Note, being able to filter functions when both are called is not completely
handled yet, but that shouldn't be too hard to manage.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509096221.162236.8806372072523195752.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.555493396@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In order to make it possible to have multiple callbacks registered with the
function_graph tracer, the retstack needs to be converted from an array of
ftrace_ret_stack structures to an array of longs. This will allow to store
the list of callbacks on the stack for the return side of the functions.
Link: https://lore.kernel.org/linux-trace-kernel/171509092742.162236.4427737821399314856.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.073111754@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Günter reports build breakage for m68k "m5208evb_defconfig" plus
CONFIG_BLK_DEV_INITRD=y caused by commit 66bc1a173328 ("treewide:
Use sysfs_bin_attr_simple_read() helper").
The defconfig disables CONFIG_SYSFS, so sysfs_bin_attr_simple_read()
is not compiled into the kernel. But init/initramfs.c references
that function in the initializer of a struct bin_attribute.
Add an empty static inline to avoid the build breakage.
Fixes: 66bc1a173328 ("treewide: Use sysfs_bin_attr_simple_read() helper")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/e12b0027-b199-4de7-b83d-668171447ccc@roeck-us.net
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/05f4290439a58730738a15b0c99cd8576c4aa0d9.1716461752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no more in-kernel users of this function, and no driver should
ever be using it, so remove it from the kernel.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230704131715.44454-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
