summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-04-14mfd: ntxec: Support for EC in Tolino Shine 2 HDAndreas Kemnade
Add the version of the EC in the Tolino Shine 2 HD to the supported versions. It seems not to have an RTC and does not ack data written to it. The vendor kernel happily ignores write errors, using I2C via userspace i2c-set also shows the error. So add a quirk to ignore that error. PWM can be successfully configured despite of that error. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: rn5t618: Do not cache various USB related registersAndreas Kemnade
These register get reset to their OTP defaults after USB plugging. And while at it, also add a missing register for detecting the charger type. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Remove support for dangling device propertiesHeikki Krogerus
From now on only accepting complete software nodes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: core: Add support for software nodesHeikki Krogerus
The old device property API is going to be removed and replaced with the newer software node API. This prepares MFD subsystem for the transition. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: da9063: Support SMBus and I2C modeHubert Streidl
By default the PMIC DA9063 2-wire interface is SMBus compliant. This means the PMIC will automatically reset the interface when the clock signal ceases for more than the SMBus timeout of 35 ms. If the I2C driver / device is not capable of creating atomic I2C transactions, a context change can cause a ceasing of the clock signal. This can happen if for example a real-time thread is scheduled. Then the DA9063 in SMBus mode will reset the 2-wire interface. Subsequently a write message could end up in the wrong register. This could cause unpredictable system behavior. The DA9063 PMIC also supports an I2C compliant mode for the 2-wire interface. This mode does not reset the interface when the clock signal ceases. Thus the problem depicted above does not occur. This patch tests for the bus functionality "I2C_FUNC_I2C". It can reasonably be assumed that the bus cannot obey SMBus timings if this functionality is set. SMBus commands most probably are emulated in this case which is prone to the latency issue described above. This patch enables the I2C bus mode if I2C_FUNC_I2C is set or otherwise keeps the default SMBus mode. Signed-off-by: Hubert Streidl <hubert.streidl@de.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-m10-bmc: Add access table configuration to the regmapMatthew Gerlach
This patch adds access tables to the MAX 10 BMC regmap. This prevents the host from accessing the unwanted I/O space. It also filters out the invalid outputs when reading the regmap debugfs interface. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-m10-bmc: Simplify the legacy version reg definitionXu Yilun
The version register is the only one in the legacy I/O space to be accessed, so it is not necessary to define the legacy base & version register offset. A direct definition of the legacy version register address would be fine. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: intel-m10-bmc: Fix the register access rangeXu Yilun
This patch fixes the max register address of MAX 10 BMC. The range 0x20000000 ~ 0x200000fc are for control registers of the QSPI flash controller, which are not accessible to host. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Remove support for AB3100Arnd Bergmann
The ST-Ericsson U300 platform has been removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: lp87565: Remove unused define 'LP87565_NUM_BUCK'Luca Ceresoli
This define appears incorrect, but it is completely unused so it can be removed. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: dbx500-prcmu: Use true and false for bool variableJiapeng Chong
Fix the following coccicheck warning: ./include/linux/mfd/db8500-prcmu.h:723:8-9: WARNING: return of 0/1 in function 'db8500_prcmu_is_ac_wake_requested' with return type bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14Merge tag 'ib-mfd-watchdog-v5.13' into ibs-for-mfd-mergedLee Jones
Immutable branch between MFD and Watchdog due for the v5.13 merge window
2021-04-14Merge tags 'ib-mfd-clk-gpio-regulator-rtc-v5.13', 'ib-mfd-extcon-v5.13', ↵Lee Jones
'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window Immutable branch between MFD and Extcon due for the v5.13 merge window Immutable branch between MFD and Input due for the v5.13 merge window Immutable branch between MFD and Platform/x86 due for the v5.13 merge window Immutable branch between MFD and Power due for the v5.13 merge window Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
2021-04-14usb: typec: tcpm: Honour pSnkStdby requirement during negotiationBadhri Jagan Sridharan
>From PD Spec: The Sink Shall transition to Sink Standby before a positive or negative voltage transition of VBUS. During Sink Standby the Sink Shall reduce its power draw to pSnkStdby. This allows the Source to manage the voltage transition as well as supply sufficient operating current to the Sink to maintain PD operation during the transition. The Sink Shall complete this transition to Sink Standby within tSnkStdby after evaluating the Accept Message from the Source. The transition when returning to Sink operation from Sink Standby Shall be completed within tSnkNewPower. The pSnkStdby requirement Shall only apply if the Sink power draw is higher than this level. The above requirement needs to be met to prevent hard resets from port partner. Without the patch: (5V/3A during SNK_DISCOVERY all the way through explicit contract) [ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 95.837190] VBUS on [ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 95.882086] polarity 1 [ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 95.883441] enable vbus discharge ret:0 [ 95.883445] Requesting mux state 1, usb-role 2, orientation 2 [ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 96.038960] VBUS on [ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 96.383946] Setting voltage/current limit 5000 mV 3000 mA [ 96.383961] vbus=0 charge:=1 [ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 96.394404] PD RX, header: 0x2161 [1] [ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA [] [ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 96.394416] Setting usb_comm capable false [ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA [ 96.395093] PD TX, header: 0x1042 [ 96.397404] PD TX complete, status: 0 [ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 96.400826] PD RX, header: 0x363 [1] [ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 96.577315] PD RX, header: 0x566 [1] [ 96.577321] Setting voltage/current limit 9000 mV 2000 mA [ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] With the patch: [ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 168.522348] VBUS on [ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 168.568688] polarity 1 [ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 168.570158] enable vbus discharge ret:0 [ 168.570161] Requesting mux state 1, usb-role 2, orientation 2 [ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 169.070695] Setting voltage/current limit 5000 mV 3000 mA [ 169.070702] vbus=0 charge:=1 [ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 169.077162] PD RX, header: 0x2161 [1] [ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA [] [ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 169.077191] Setting usb_comm capable false [ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA [ 169.077762] PD TX, header: 0x1042 [ 169.079990] PD TX complete, status: 0 [ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 169.083183] VBUS on [ 169.084195] PD RX, header: 0x363 [1] [ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 169.084206] Setting standby current 5000 mV @ 500 mA [ 169.084209] Setting voltage/current limit 5000 mV 500 mA [ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 169.260222] PD RX, header: 0x566 [1] [ 169.260227] Setting voltage/current limit 9000 mV 2000 mA [ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] [ 169.261570] AMS POWER_NEGOTIATION finished Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14SUNRPC: Remove trace_xprt_transmit_queuedChuck Lever
This tracepoint can crash when dereferencing snd_task because when some transports connect, they put a cookie in that field instead of a pointer to an rpc_task. BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc] Read of size 2 at addr ffff8881a83bd3a0 by task git/331872 CPU: 11 PID: 331872 Comm: git Tainted: G S 5.12.0-rc2-00007-g3ab6e585a7f9 #1453 Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015 Call Trace: dump_stack+0x9c/0xcf print_address_description.constprop.0+0x18/0x239 kasan_report+0x174/0x1b0 trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc] xprt_prepare_transmit+0x8e/0xc1 [sunrpc] call_transmit+0x4d/0xc6 [sunrpc] Fixes: 9ce07ae5eb1d ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-14SUNRPC: Add tracepoint that fires when an RPC is retransmittedChuck Lever
A separate tracepoint can be left enabled all the time to capture rare but important retransmission events. So for example: kworker/u26:3-568 [009] 156.967933: xprt_retransmit: task:44093@5 xid=0xa25dbc79 nfsv3 WRITE ntrans=2 Or, for example, enable all nfs and nfs4 tracepoints, and set up a trigger to disable tracing when xprt_retransmit fires to capture everything that leads up to it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-14NFS: Split attribute support out from the server capabilitiesTrond Myklebust
There are lots of attributes, and they are crowding out the bit space. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-14KEYS: trusted: Introduce TEE based Trusted KeysSumit Garg
Add support for TEE based trusted keys where TEE provides the functionality to seal and unseal trusted keys using hardware unique key. Refer to Documentation/staging/tee.rst for detailed information about TEE. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14KEYS: trusted: Add generic trusted keys frameworkSumit Garg
Current trusted keys framework is tightly coupled to use TPM device as an underlying implementation which makes it difficult for implementations like Trusted Execution Environment (TEE) etc. to provide trusted keys support in case platform doesn't posses a TPM device. Add a generic trusted keys framework where underlying implementations can be easily plugged in. Create struct trusted_key_ops to achieve this, which contains necessary functions of a backend. Also, define a module parameter in order to select a particular trust source in case a platform support multiple trust sources. In case its not specified then implementation itetrates through trust sources list starting with TPM and assign the first trust source as a backend which has initiazed successfully during iteration. Note that current implementation only supports a single trust source at runtime which is either selectable at compile time or during boot via aforementioned module parameter. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: Make sealed key properly interoperableJames Bottomley
The current implementation appends a migratable flag to the end of a key, meaning the format isn't exactly interoperable because the using party needs to know to strip this extra byte. However, all other consumers of TPM sealed blobs expect the unseal to return exactly the key. Since TPM2 keys have a key property flag that corresponds to migratable, use that flag instead and make the actual key the only sealed quantity. This is secure because the key properties are bound to a hash in the private part, so if they're altered the key won't load. Backwards compatibility is implemented by detecting whether we're loading a new format key or not and correctly setting migratable from the last byte of old format keys. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: use ASN.1 TPM2 key format for the blobsJames Bottomley
Modify the TPM2 key format blob output to export and import in the ASN.1 form for TPM2 sealed object keys. For compatibility with prior trusted keys, the importer will also accept two TPM2B quantities representing the public and private parts of the key. However, the export via keyctl pipe will only output the ASN.1 format. The benefit of the ASN.1 format is that it's a standard and thus the exported key can be used by userspace tools (openssl_tpm2_engine, openconnect and tpm2-tss-engine). The format includes policy specifications, thus it gets us out of having to construct policy handles in userspace and the format includes the parent meaning you don't have to keep passing it in each time. This patch only implements basic handling for the ASN.1 format, so keys with passwords but no policy. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14security: keys: trusted: fix TPM2 authorizationsJames Bottomley
In TPM 1.2 an authorization was a 20 byte number. The spec actually recommended you to hash variable length passwords and use the sha1 hash as the authorization. Because the spec doesn't require this hashing, the current authorization for trusted keys is a 40 digit hex number. For TPM 2.0 the spec allows the passing in of variable length passwords and passphrases directly, so we should allow that in trusted keys for ease of use. Update the 'blobauth' parameter to take this into account, so we can now use plain text passwords for the keys. so before keyctl add trusted kmk "new 32 blobauth=f572d396fae9206628714fb2ce00f72e94f2258fkeyhandle=81000001" @u after we will accept both the old hex sha1 form as well as a new directly supplied password: keyctl add trusted kmk "new 32 blobauth=hello keyhandle=81000001" @u Since a sha1 hex code must be exactly 40 bytes long and a direct password must be 20 or less, we use the length as the discriminator for which form is input. Note this is both and enhancement and a potential bug fix. The TPM 2.0 spec requires us to strip leading zeros, meaning empyty authorization is a zero length HMAC whereas we're currently passing in 20 bytes of zeros. A lot of TPMs simply accept this as OK, but the Microsoft TPM emulator rejects it with TPM_RC_BAD_AUTH, so this patch makes the Microsoft TPM emulator work with trusted keys. Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips") Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14oid_registry: Add TCG defined OIDS for TPM keysJames Bottomley
The TCG has defined an OID prefix "2.23.133.10.1" for the various TPM key uses. We've defined three of the available numbers: 2.23.133.10.1.3 TPM Loadable key. This is an asymmetric key (Usually RSA2048 or Elliptic Curve) which can be imported by a TPM2_Load() operation. 2.23.133.10.1.4 TPM Importable Key. This is an asymmetric key (Usually RSA2048 or Elliptic Curve) which can be imported by a TPM2_Import() operation. Both loadable and importable keys are specific to a given TPM, the difference is that a loadable key is wrapped with the symmetric secret, so must have been created by the TPM itself. An importable key is wrapped with a DH shared secret, and may be created without access to the TPM provided you know the public part of the parent key. 2.23.133.10.1.5 TPM Sealed Data. This is a set of data (up to 128 bytes) which is sealed by the TPM. It usually represents a symmetric key and must be unsealed before use. The ASN.1 binary key form starts of with this OID as the first element of a sequence, giving the binary form a unique recognizable identity marker regardless of encoding. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14lib: Add ASN.1 encoderJames Bottomley
We have a need in the TPM2 trusted keys to return the ASN.1 form of the TPM key blob so it can be operated on by tools outside of the kernel. The specific tools are the openssl_tpm2_engine, openconnect and the Intel tpm2-tss-engine. To do that, we have to be able to read and write the same binary key format the tools use. The current ASN.1 decoder does fine for reading, but we need pieces of an ASN.1 encoder to write the key blob in binary compatible form. For backwards compatibility, the trusted key reader code will still accept the two TPM2B quantities that it uses today, but the writer will only output the ASN.1 form. The current implementation only encodes the ASN.1 bits we actually need. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14regulator: rohm-regulator: Support SNVS HW state.Matti Vaittinen
The ROHM BD71815 supports setting voltage levels/regulator status for HW-states "RUN", "SUSPEND", "LPSR" and "SNVS". Add DT parsing helper also for SNVS state. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Support for ROHM BD71815 PMIC coreMatti Vaittinen
Add core support for ROHM BD71815 Power Management IC. The IC integrates regulators, a battery charger with a coulomb counter, a real-time clock (RTC), clock gate and general-purpose outputs (GPO). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Sort ROHM chip ID list for better readabilityMatti Vaittinen
Sort the ID list so it is easier to see which ICs are present. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: Add ROHM BD71815 IDMatti Vaittinen
Add chip ID for ROHM BD71815 and PMIC so that drivers can identify this IC. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14mfd: bd718x7: simplify by cleaning unnecessary device dataMatti Vaittinen
Most ROHM PMIC sub-devices only use the regmap pointer from parent device. They can obtain this by dev_get_regamap so in most cases the MFD device does not need to allocate and populate the driver data. Simplify drivers by removing this. The BD70528 still needs the access to watchdog mutex so keep rohm_regmap_dev in use on BD70528 RTC and WDG drivers for now. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-04-14fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGIDVivek Goyal
When posix access ACL is set, it can have an effect on file mode and it can also need to clear SGID if. - None of caller's group/supplementary groups match file owner group. AND - Caller is not priviliged (No CAP_FSETID). As of now fuser server is responsible for changing the file mode as well. But it does not know whether to clear SGID or not. So add a flag FUSE_SETXATTR_ACL_KILL_SGID and send this info with SETXATTR to let file server know that sgid needs to be cleared as well. Reported-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-04-14fuse: extend FUSE_SETXATTR requestVivek Goyal
Fuse client needs to send additional information to file server when it calls SETXATTR(system.posix_acl_access), so add extra flags field to the structure. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-04-13bpf: Return target info when a tracing bpf_link is queriedToke Høiland-Jørgensen
There is currently no way to discover the target of a tracing program attachment after the fact. Add this information to bpf_link_info and return it when querying the bpf_link fd. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413091607.58945-1-toke@redhat.com
2021-04-13Merge branch 'mlx5_memic_ops' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Maor Gottlieb says: ==================== This series from Maor extends MEMIC to support atomic operations from the host in addition to already supported regular read/write. ==================== * 'memic_ops': RDMA/mlx5: Expose UAPI to query DM RDMA/mlx5: Add support in MEMIC operations RDMA/mlx5: Add support to MODIFY_MEMIC command RDMA/mlx5: Re-organize the DM code RDMA/mlx5: Move all DM logic to separate file RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number net/mlx5: Add MEMIC operations related bits
2021-04-13RDMA/mlx5: Expose UAPI to query DMMaor Gottlieb
Expose UAPI to query MEMIC DM, this will let user space application that didn't allocate the DM but has access to by owning the matching command FD to retrieve its information. Link: https://lore.kernel.org/r/20210411122924.60230-8-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-13RDMA/mlx5: Add support in MEMIC operationsMaor Gottlieb
MEMIC buffer, in addition to regular read and write operations, can support atomic operations from the host. Introduce and implement new UAPI to allocate address space for MEMIC operations such as atomic. This includes: 1. Expose new IOCTL for request mapping of MEMIC operation. 2. Hold the operations address in a list, so same operation to same DM will be allocated only once. 3. Manage refcount on the mlx5_ib_dm object, so it would be keep valid until all addresses were unmapped. Link: https://lore.kernel.org/r/20210411122924.60230-7-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-13RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line numberMaor Gottlieb
In order to support multiple methods declaration in the same file we should use the line number as part of the name. Link: https://lore.kernel.org/r/20210411122924.60230-3-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-13Merge tag 'drm-msm-next-2021-04-11' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-next msm-next from Rob: * Big DSI phy/pll cleanup. Includes some clk patches, acked by maintainer * Initial support for sc7280 * compatibles fixes for sm8150/sm8250 * cleanups for all dpu gens to use same bandwidth scaling paths (\o/) * various shrinker path lock contention optimizations * unpin/swap support for GEM objects (disabled by default, enable with msm.enable_eviction=1 .. due to various combinations of iommu drivers with older gens I want to get more testing on hw I don't have in front of me before enabling by default) * The usual assortment of misc fixes and cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvL=4aw15qoY8fbKG9FCgnx8Y-dCtf7xiFwTQSHopwSQg@mail.gmail.com
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-13net/mlx5: Add MEMIC operations related bitsMaor Gottlieb
Add the MEMIC operations bits and structures to the mlx5_ifc file. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-04-13arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)Peter Collingbourne
This change introduces a prctl that allows the user program to control which PAC keys are enabled in a particular task. The main reason why this is useful is to enable a userspace ABI that uses PAC to sign and authenticate function pointers and other pointers exposed outside of the function, while still allowing binaries conforming to the ABI to interoperate with legacy binaries that do not sign or authenticate pointers. The idea is that a dynamic loader or early startup code would issue this prctl very early after establishing that a process may load legacy binaries, but before executing any PAC instructions. This change adds a small amount of overhead to kernel entry and exit due to additional required instruction sequences. On a DragonBoard 845c (Cortex-A75) with the powersave governor, the overhead of similar instruction sequences was measured as 4.9ns when simulating the common case where IA is left enabled, or 43.7ns when simulating the uncommon case where IA is disabled. These numbers can be seen as the worst case scenario, since in more realistic scenarios a better performing governor would be used and a newer chip would be used that would support PAC unlike Cortex-A75 and would be expected to be faster than Cortex-A75. On an Apple M1 under a hypervisor, the overhead of the entry/exit instruction sequences introduced by this patch was measured as 0.3ns in the case where IA is left enabled, and 33.0ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5 Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-13lightnvm: remove duplicate include in lightnvm.hZhang Yunkai
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h' is duplicated.It is also included in the 5th and 7th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com> Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-13Merge branch 'kvm-arm64/vgic-5.13' into kvmarm-master/nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-13Merge branch 'kvm-arm64/ptp' into kvmarm-master/nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-13Merge branch 'kvm-arm64/nvhe-panic-info' into kvmarm-master/nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-13NFSv4: Add support for the NFSv4.2 "change_attr_type" attributeTrond Myklebust
The change_attr_type allows the server to provide a description of how the change attribute will behave. This again will allow the client to optimise its behaviour w.r.t. attribute revalidation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-13ACPI: utils: Document for_each_acpi_dev_match() macroAndy Shevchenko
The macro requires to call acpi_dev_put() on each iteration. Due to this it doesn't tolerate sudden disappearence of the devices. Document all these nuances to prevent users blindly call it without understanding the possible issues. While at it, add the note to the acpi_dev_get_next_match_dev() and advertise acpi_dev_put() instead of put_device() in the whole family of the helper functions. Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro") Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13NFS: Separate tracking of file mode cache validity from the uid/gidTrond Myklebust
chown()/chgrp() and chmod() are separate operations, and in addition, there are mode operations that are performed automatically by the server. So let's track mode validity separately from the file ownership validity. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-13ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI codeAndy Shevchenko
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put() and reuse both in ACPI code in drivers/acpi/. While at it, use acpi_bus_put_acpi_device() in one place instead of the above. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13NFS: Separate tracking of file nlinks cache validity from the mode/uid/gidTrond Myklebust
Rename can cause us to revalidate the access cache, so lets track the nlinks separately from the mode/uid/gid. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit (git 2.34.1) at 2025-09-13 18:07:43 +0000