summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-04-04PM / Domains: Add generic data pointer to genpd data structDave Gerlach
Add a void *data pointer to struct generic_pm_domain_data. Because this exists for each device associated with a genpd it will allow us to assign per-device data if needed on a platform for control of that specific device. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-04-04nvme_fc: Clean up host fcpio done status handlingJames Smart
As Dan Carpenter pointed out: mixing 16-bit nvme status with 32-bit error status from driver. Corrected comment on fcp request struct status field, and converted done routine to explicitly set nvme status codes for nvme status. Signed-off-by: James Smart <james.smart@broadcom.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04nvme_fc: Sync FC-NVME header with standardJames Smart
Update FC-NVME definitions to match FC-NVME r1.14 (16-020vB) plus change voted in by 2/22 FC-NVME Adhoc (see HOSTID below). Includes the following: - Addition of "status_code" field to ERSP IU - Addition of FC-NVME LS RJT reason_codes and reason_explanations - CreateAssociation payload, HostID field shortened to 16 bytes Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04net/utils: generic inet_pton_with_scope helperSagi Grimberg
Several locations in the stack need to handle ipv4/ipv6 (with scope) and port strings conversion to sockaddr. Add a helper that takes either AF_INET, AF_INET6 or AF_UNSPEC (for wildcard) to centralize this handling. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-04drm: bridge: dw-hdmi: Move HPD handling to PHY operationsNeil Armstrong
The HDMI TX controller support HPD and RXSENSE signaling from the PHY via it's STAT0 PHY interface, but some vendor PHYs can manage these signals independently from the controller, thus these STAT0 handling should be moved to PHY specific operations and become optional. The existing STAT0 HPD and RXSENSE handling code is refactored into a supplementaty set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491309119-24220-2-git-send-email-narmstrong@baylibre.com
2017-04-04drm: bridge: dw-hdmi: Switch to V4L bus format and encodingsNeil Armstrong
Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04reset: add exported __reset_control_get, return NULL if optionalPhilipp Zabel
Rename the internal __reset_control_get/put functions to __reset_control_get/put_internal and add an exported __reset_control_get equivalent to __of_reset_control_get that takes a struct device parameter. This avoids the confusing call to __of_reset_control_get in the non-DT case and fixes the devm_reset_control_get_optional function to return NULL if RESET_CONTROLLER is enabled but dev->of_node == NULL. Fixes: bb475230b8e5 ("reset: make optional functions really optional") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04can: initial support for network namespacesMario Kicherer
This patch adds initial support for network namespaces. The changes only enable support in the CAN raw, proc and af_can code. GW and BCM still have their checks that ensure that they are used only from the main namespace. The patch boils down to moving the global structures, i.e. the global filter list and their /proc stats, into a per-namespace structure and passing around the corresponding "struct net" in a lot of different places. Changes since v1: - rebased on current HEAD (2bfe01e) - fixed overlong line Signed-off-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04Merge tag 'topic/synopsys-media-formats-2017-04-03' of ↵Sean Paul
git://anongit.freedesktop.org/git/drm-misc into drm-misc-next Media formats for synopsys HDMI TX Controller Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay
2017-04-04can: ti_hecc: Convert TI HECC driver to DT only driverYegor Yefremov
This patch converts TI HECC driver to DT only driver. This results in removing ti_hecc.h containing now obsolete platform data. Former transceiver_switch callback function will be now modelled via regulator API. Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04Merge tag 'v4.11-rc5' into patchworkMauro Carvalho Chehab
Linux 4.11-rc5 * tag 'v4.11-rc5': (1168 commits) Linux 4.11-rc5 tty: pl011: fix earlycon work-around for QDF2400 erratum 44 kasan: do not sanitize kexec purgatory drivers/rapidio/devices/tsi721.c: make module parameter variable name unique mm/hugetlb.c: don't call region_abort if region_chg fails kasan: report only the first error by default hugetlbfs: initialize shared policy as part of inode allocation mm: fix section name for .data..ro_after_init mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd() mm: workingset: fix premature shadow node shrinking with cgroups mm: rmap: fix huge file mmap accounting in the memcg stats mm: move mm_percpu_wq initialization earlier mm: migrate: fix remove_migration_pte() for ksm pages nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type NFSv4.1 fix infinite loop on IO BAD_STATEID error serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text tty/serial: atmel: fix TX path in atmel_console_write() tty/serial: atmel: fix race condition (TX+DMA) serial: mxs-auart: Fix baudrate calculation irqchip/mips-gic: Fix Local compare interrupt ...
2017-04-04drm: Add data transmission order bus flagLaurent Pinchart
The flags indicate whether data is transmitted LSB to MSB or MSB to LSB on the bus. The exact meaning is bus-type dependent. For instance, for LVDS buses the flags indicate whether the seven data bits transmitted in a clock pulse are sent in normal order (MSB to LSB, slots 0 to 6) or reverse order (LSB to MSB, slots 6 to 0). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: Move Tegra flowctrl driverJon Hunter
The flowctrl driver is required for both ARM and ARM64 Tegra devices and in order to enable support for it for ARM64, move the Tegra flowctrl driver into drivers/soc/tegra. By moving the flowctrl driver, tegra_flowctrl_init() is now called by via an early initcall and to prevent this function from attempting to mapping IO space for a non-Tegra device, a test for 'soc_is_tegra()' is also added. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04soc/tegra: Fix link errors with PMC disabledArnd Bergmann
With the new Tegra186 PMC driver merged, anything that relies on the previous PMC driver fails to link when that is disabled: arch/arm/mach-tegra/pm.o: In function `tegra_pm_set': pm.c:(.text.tegra_pm_set+0x3c): undefined reference to `tegra_pmc_enter_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_suspend_enter': pm.c:(.text.tegra_suspend_enter+0x4): undefined reference to `tegra_pmc_get_suspend_mode' arch/arm/mach-tegra/pm.o: In function `tegra_init_suspend': pm.c:(.init.text+0x1c): undefined reference to `tegra_pmc_get_suspend_mode' pm.c:(.init.text+0x74): undefined reference to `tegra_pmc_set_suspend_mode' ERROR: tegra_powergate_sequence_power_up [drivers/ata/ahci_tegra.ko] undefined! ERROR: tegra_powergate_power_off [drivers/ata/ahci_tegra.ko] undefined! Making the definition depend on the presence of the driver makes it build again, though that might not be the correct fix. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 854014236290 ("soc/tegra: Implement Tegra186 PMC support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABIChristoffer Dall
As an oversight, for GICv2, we accidentally export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a word, meaning that userspace must always use the lower 5 bits to communicate with the KVM device and must shift the value left by 3 places to obtain the actual priority mask level. Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR, we have to fix the value we export when emulating a GICv2 on top of a hardware GICv3 and exporting the emulated GICv2 state to userspace. Take the chance to clarify this aspect of the ABI. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-04KVM: arm64: Ensure LRs are clear when they should beChristoffer Dall
We currently have some code to clear the list registers on GICv3, but we never call this code, because the caller got nuked when removing the old vgic. We also used to have a similar GICv2 part, but that got lost in the process too. Let's reintroduce the logic for GICv2 and call the logic when we initialize the use of hypervisors on the CPU, for example when first loading KVM or when exiting a low power state. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-04sched,tracing: Update trace_sched_pi_setprio()Peter Zijlstra
Pass the PI donor task, instead of a numerical priority. Numerical priorities are not sufficient to describe state ever since SCHED_DEADLINE. Annotate all sched tracepoints that are currently broken; fixing them will bork userspace. *hate*. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170323150216.353599881@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-04sched/rtmutex: Refactor rt_mutex_setprio()Peter Zijlstra
With the introduction of SCHED_DEADLINE the whole notion that priority is a single number is gone, therefore the @prio argument to rt_mutex_setprio() doesn't make sense anymore. So rework the code to pass a pi_task instead. Note this also fixes a problem with pi_top_task caching; previously we would not set the pointer (call rt_mutex_update_top_task) if the priority didn't change, this could lead to a stale pointer. As for the XXX, I think its fine to use pi_task->prio, because if it differs from waiter->prio, a PI chain update is immenent. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170323150216.303827095@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-04sched/rtmutex/deadline: Fix a PI crash for deadline tasksXunlei Pang
A crash happened while I was playing with deadline PI rtmutex. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff810eeb8f>] rt_mutex_get_top_task+0x1f/0x30 PGD 232a75067 PUD 230947067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 10994 Comm: a.out Not tainted Call Trace: [<ffffffff810b658c>] enqueue_task+0x2c/0x80 [<ffffffff810ba763>] activate_task+0x23/0x30 [<ffffffff810d0ab5>] pull_dl_task+0x1d5/0x260 [<ffffffff810d0be6>] pre_schedule_dl+0x16/0x20 [<ffffffff8164e783>] __schedule+0xd3/0x900 [<ffffffff8164efd9>] schedule+0x29/0x70 [<ffffffff8165035b>] __rt_mutex_slowlock+0x4b/0xc0 [<ffffffff81650501>] rt_mutex_slowlock+0xd1/0x190 [<ffffffff810eeb33>] rt_mutex_timed_lock+0x53/0x60 [<ffffffff810ecbfc>] futex_lock_pi.isra.18+0x28c/0x390 [<ffffffff810ed8b0>] do_futex+0x190/0x5b0 [<ffffffff810edd50>] SyS_futex+0x80/0x180 This is because rt_mutex_enqueue_pi() and rt_mutex_dequeue_pi() are only protected by pi_lock when operating pi waiters, while rt_mutex_get_top_task(), will access them with rq lock held but not holding pi_lock. In order to tackle it, we introduce new "pi_top_task" pointer cached in task_struct, and add new rt_mutex_update_top_task() to update its value, it can be called by rt_mutex_setprio() which held both owner's pi_lock and rq lock. Thus "pi_top_task" can be safely accessed by enqueue_task_dl() under rq lock. Originally-From: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Xunlei Pang <xlpang@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170323150216.157682758@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-04Merge branch 'sched/core' into locking/coreThomas Gleixner
Required for the rtmutex/sched_deadline patches which depend on both branches
2017-04-04extcon: Add new extcon_register_notifier_all() to monitor all external ↵Chanwoo Choi
connectors The extcon core already provides the extcon_register_notifier() function in order to register the notifier block which is used to monitor the state change for the specific external connector such as EXTCON_USB, EXTCON_USB_HOST and so on. The extcon consumer uses the this function. The extcon consumer might need to monitor the all supported external connectors from the extcon device. In this case, The extcon consumer should have each notifier_block structure for each external connector. This patch adds the new extcon_register_notifier_all() function that extcon consumer is able to monitor the state change of all supported external connectors by using only one notifier_block structure. - List of new added functions: int extcon_register_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int extcon_unregister_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); void devm_extcon_unregister_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2017-04-03qed: Manage with less memory regions for RoCERam Amrani
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flowcache: more "unsigned int"Alexey Dobriyan
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flowcache: make flow_key_size() return "unsigned int"Alexey Dobriyan
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03vfs: add common GETFSMAP ioctl definitionsDarrick J. Wong
Add the GETFSMAP headers to the VFS kernel headers Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-04-03sctp: check for dst and pathmtu update in sctp_packet_configXin Long
This patch is to move sctp_transport_dst_check into sctp_packet_config from sctp_packet_transmit and add pathmtu check in sctp_packet_config. With this fix, sctp can update dst or pathmtu before appending chunks, which can void dropping packets in sctp_packet_transmit when dst is obsolete or dst's mtu is changed. This patch is also to improve some other codes in sctp_packet_config. It updates packet max_size with gso_max_size, checks for dst and pathmtu, and appends ecne chunk only when packet is empty and asoc is not NULL. It makes sctp flush work better, as we only need to set up them once for one flush schedule. It's also safe, since asoc is NULL only when the packet is created by sctp_ootb_pkt_new in which it just gets the new dst, no need to do more things for it other than set packet with transport's pathmtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctpXin Long
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03PCI: Avoid FLR for Intel 82579 NICsSasha Neftin
Per Intel Specification Update 335553-002 (see link below), some 82579 network adapters advertise a Function Level Reset (FLR) capability, but they can hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Add a quirk to prevent the use of FLR on these devices. [bhelgaas: changelog, comments] Link: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/82579lm-82579v-gigabit-network-connection-spec-update.pdf Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-03ACPICA: Update TPM2 ACPI tableJiandi An
TCG ACPI Specification Family "1.2" and "2.0" Version 1.2 Revision 8 introduces new start method for ARM SMC. - Add new start method (type 11) for ARM SMC - Add start method specific parameters offset for ARM SMC start method Signed-off-by: Jiandi An <anjiandi@codeaurora.org> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_crb: request and relinquish locality 0Jarkko Sakkinen
This commit adds support for requesting and relinquishing locality 0 in tpm_crb for the course of command transmission. In order to achieve this, two new callbacks are added to struct tpm_class_ops: - request_locality - relinquish_locality With CRB interface you first set either requestAccess or relinquish bit from TPM_LOC_CTRL_x register and then wait for locAssigned and tpmRegValidSts bits to be set in the TPM_LOC_STATE_x register. The reason why were are doing this is to make sure that the driver will work properly with Intel TXT that uses locality 2. There's no explicit guarantee that it would relinquish this locality. In more general sense this commit enables tpm_crb to be a well behaving citizen in a multi locality environment. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
2017-04-04Merge branch 'vmwgfx-fixes-4.11' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Set of vmwgfx fixes * 'vmwgfx-fixes-4.11' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl() drm/vmwgfx: Remove getparam error message drm/ttm: Avoid calling drm_ht_remove from atomic context drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl() drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl() drm/vmwgfx: Type-check lookups of fence objects
2017-04-03Merge branch 'ib/4.11-rc3-i2c-irq-resources' into nextDmitry Torokhov
Bring in changes to i2c to better manage device properties and to allow specifying client interrupt through a resource structure.
2017-04-03Merge tag 'v4.11-rc5' into nextDmitry Torokhov
Sync up with mainline to bring in changes to input subsystem merged through other trees.
2017-04-03Input: cros_ec_keyb - add an EC event for sysrqRajat Jain
Some form factors (detachables/tablets) may not have a keyboard and thus user may have to resort to using a defined EC UI to send sysrq(s) to the kernel in order to collect crash info etc. This UI typically is in the form of user pressing volume / power buttons in some specific sequence and for some specific time. Add a new EC event that allows EC to communicate the sysrq to the AP. (We're skipping event number 5 because it has been reserved for something else) Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-03ftrace: Have init/main.c call ftrace directly to free init memorySteven Rostedt (VMware)
Relying on free_reserved_area() to call ftrace to free init memory proved to not be sufficient. The issue is that on x86, when debug_pagealloc is enabled, the init memory is not freed, but simply set as not present. Since ftrace was uninformed of this, starting function tracing still tries to update pages that are not present according to the page tables, causing ftrace to bug, as well as killing the kernel itself. Instead of relying on free_reserved_area(), have init/main.c call ftrace directly just before it frees the init memory. Then it needs to use __init_begin and __init_end to know where the init memory location is. Looking at all archs (and testing what I can), it appears that this should work for each of them. Reported-by: kernel test robot <xiaolong.ye@intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-03perf: qcom: Add L3 cache PMU driverAgustin Vega-Frias
This adds a new dynamic PMU to the Perf Events framework to program and control the L3 cache PMUs in some Qualcomm Technologies SOCs. The driver supports a distributed cache architecture where the overall cache for a socket is comprised of multiple slices each with its own PMU. Access to each individual PMU is provided even though all CPUs share all the slices. User space needs to aggregate to individual counts to provide a global picture. The driver exports formatting and event information to sysfs so it can be used by the perf user space tools with the syntaxes: perf stat -a -e l3cache_0_0/read-miss/ perf stat -a -e l3cache_0_0/event=0x21/ Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> [will: fixed sparse issues] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-03KEYS: Add a key restriction structMat Martineau
Key link restrictions require restriction-specific data as well as a restriction-specific function pointer. As a first step toward replacing the restrict_link pointer in struct key, define a more general key_restriction structure that captures the required function, key, and key type pointers. Key type modules should not be pinned on account of this key type pointer because the pointer will be cleared by the garbage collector if the key type is unregistered. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Split role of the keyring pointer for keyring restrict functionsMat Martineau
The first argument to the restrict_link_func_t functions was a keyring pointer. These functions are called by the key subsystem with this argument set to the destination keyring, but restrict_link_by_signature expects a pointer to the relevant trusted keyring. Restrict functions may need something other than a single struct key pointer to allow or reject key linkage, so the data used to make that decision (such as the trust keyring) is moved to a new, fourth argument. The first argument is now always the destination keyring. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03KEYS: Use a typedef for restrict_link function pointersMat Martineau
This pointer type needs to be returned from a lookup function, and without a typedef the syntax gets cumbersome. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
2017-04-03media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX ControllerNeil Armstrong
In order to describe the RGB and YUV bus formats used to feed the Synopsys DesignWare HDMI TX Controller, add missing formats to the list of Bus Formats. Documentation for these formats is added in a separate patch. Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-3-git-send-email-narmstrong@baylibre.com
2017-04-03KEYS: Add a system blacklist keyringDavid Howells
Add the following: (1) A new system keyring that is used to store information about blacklisted certificates and signatures. (2) A new key type (called 'blacklist') that is used to store a blacklisted hash in its description as a hex string. The key accepts no payload. (3) The ability to configure a list of blacklisted hashes into the kernel at build time. This is done by setting CONFIG_SYSTEM_BLACKLIST_HASH_LIST to the filename of a list of hashes that are in the form: "<hash>", "<hash>", ..., "<hash>" where each <hash> is a hex string representation of the hash and must include all necessary leading zeros to pad the hash to the right size. The above are enabled with CONFIG_SYSTEM_BLACKLIST_KEYRING. Once the kernel is booted, the blacklist keyring can be listed: root@andromeda ~]# keyctl show %:.blacklist Keyring 723359729 ---lswrv 0 0 keyring: .blacklist 676257228 ---lswrv 0 0 \_ blacklist: 123412341234c55c1dcc601ab8e172917706aa32fb5eaf826813547fdf02dd46 The blacklist cannot currently be modified by userspace, but it will be possible to load it, for example, from the UEFI blacklist database. A later commit will make it possible to load blacklisted asymmetric keys in here too. Signed-off-by: David Howells <dhowells@redhat.com>
2017-04-03Merge tag 'v4.11-rc5' into x86/mm, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-03drivers/of/base.c: Add of_property_read_u64_indexAlistair Popple
There is of_property_read_u32_index but no u64 variant. This patch adds one similar to the u32 version for u64. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-03Merge tag 'iio-for-4.12c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Third set of new device support, cleanups and features for IIO in the 4.12 cycle Somewhat dominated in patch numbers of last of the outreachy application window related patches (they are still coming, despite window being closed which is good to see!) Good set of new drivers as well. New device support * ASPEED ADC - new driver * cpcap PMIC ADC - new driver * hid-humidity - driver for HID compatible humidity sensors. * ltc2497 ADC - new driver * mpu6050 - bring bindings up to date and add trivial support for 9250 * rockchip-saradc - update bindings to cover rk3328 * vl6180 light, proximity and time of flight sensor. - new driver Features * meson-saradc - add calibration Cleanup and minor fixes * ad5504 - constify attribute_group structure - drop casting of void * * ad7150 - replace some shifts of 1 by BIT macro usage * ad7152 - blank lines between function definitions * ad7280a - octal permissions. * ad7606 - replace use of core mlock mutex with a local lock * ad7746 - replace some shifts of 1 by BIT macro usage - function parameter alignment - drop some excessive brackets (introduced in last pull request) * ad7753 - white space cleanup * ad7754 - includes in alphabetical order and groupped appropriately. - change from missuse of internal mlock mutex to using the buffer lock to also protect values during frequency update. * ad779x - constify attribute_group structures * ad9832 - octal permissions * adis16060 - remove use of core mlock mutex in favour of adding a local _spi_write_then_read which can use the local buffer protection lock. - fix naming of above function. * adis16203 - remove locking during reads of calibbias that doesn't protect anything not protected elsewhere. * adis16209 - remove unnecessary braces in single statement if * adis16240 - remove unnecessary braces in single statement if * adt7136 - drop excess blank lines and put some in between functions. * ams-iaq - replace comma with semi colon. Not actual bug, just unusual syntax. * apds9960 - constify attribute group structure * as3935 - constify attribute group structure * bm1750 - constify attribute group structure * cros_ec - devm version of triggered buffer setup to simplify code. * exynos - drop casting of void * * hdc100x - constify attribute_group structure * hid-accel - fix wrong scale for newly introduced gravity sensor. * hts221 - drop casting of void * * hx711 - constify attribute_group structure * imx7d_adc - drop casting of void * * lm35333 - constify attribute_group structure * lsm6dsx - drop casting of void * - hold ODR configuration until enabling to avoid a race condition. * max1027 - drop casting of void * * max11100 - fix a comma where semicolon was intended (no actual bug, just odd) * max1363 - constify attribute_group structure * ms sensors - drop casting of void * * rockchip_saradc - drop casting of void * * sun4i-gpadc - fix missing dependency on THERMAL or presence of stubs (issue only introduced in pervious set) - drop casting of void * * tsl2x7x - fix wrong standard deviation calc. Note these aren't actually used for anything at the moment so bug didn't really matter. - constify attribute group structure. * vf610adc - drop casting of void * * vz89x - replace comma with semicolon. Not actual bug, just odd syntax. * zpa2326 - drop casting of void *
2017-04-03Merge 4.11-rc5 into tty-nextGreg Kroah-Hartman
We want the serial fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-03Merge 4.11-rc5 into usb-nextGreg Kroah-Hartman
We want the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-03ARM: dts: r8a7792: Correct Z clockGeert Uytterhoeven
Unlike other R-Car Gen2 SoCs with Cortex-A15 CPU cores, R-Car V2H does not have a programmable Z clock (Cortex-A15 CPU core clock), but uses a fixed divider. This is similar to the Z2 clock (Cortex-A7 CPU core clock) on R-Car E2. Hence: - Remove the Z clock output from the cpg_clocks node, as this implied a programmable clock, - Add the Z clock as a fixed factor clock, - Let the first CPU node point to the new Z clock, - Remove the Z clock index from the bindings (this definition was used by r8a7792.dtsi only, and was not a contract between DT and driver). Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ALSA: hda - Move SKL+ vendor specific register definitions to hda_register.hTakashi Iwai
They may be used by both legacy and ASoC drivers. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03ALSA: hda - Avoid tricky macrosTakashi Iwai
The macros _snd_hdac_chip_read() and *_write() expand to different types (b,w,l) per their argument. They were thought to be used only internally for other snd_hdac_chip_*() macros, but in some situations we need to call these directly, and they are way too ugly. Instead of saving a few lines, we just write these macros explicitly with the types, so that they can be used in a saner way. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-15 12:10:38 +0000