| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Mainly MM singleton fixes. And a couple of ocfs2 regression fixes"
* tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kcov: don't lose track of remote references during softirqs
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick
mm: fix possible OOB in numa_rebuild_large_mapping()
mm/migrate: fix kernel BUG at mm/compaction.c:2761!
selftests: mm: make map_fixed_noreplace test names stable
mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
gcov: add support for GCC 14
zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get()
lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n
MAINTAINERS: remove Lorenzo as vmalloc reviewer
Revert "mm: init_mlocked_on_free_v3"
mm/page_table_check: fix crash on ZONE_DEVICE
gcc: disable '-Warray-bounds' for gcc-9
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- yama: document function parameter (Christian Göttsche)
- mm/util: Swap kmemdup_array() arguments (Jean-Philippe Brucker)
- kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX()
- MAINTAINERS: Update entries for Kees Cook
* tag 'hardening-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Update entries for Kees Cook
kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX()
yama: document function parameter
mm/util: Swap kmemdup_array() arguments
|
|
ld: kernel/irq/irqdomain.o: in function `irq_domain_instantiate':
kernel/irq/irqdomain.c:296:(.text+0x10dd): undefined reference to `irq_domain_alloc_generic_chips'
ld: kernel/irq/irqdomain.c:313:(.text+0x1218): undefined reference to `irq_domain_remove_generic_chips'
ld: kernel/irq/irqdomain.o: in function `irq_domain_remove':
kernel/irq/irqdomain.c:349:(.text+0x1ddf): undefined reference to `irq_domain_remove_generic_chips'
Provide the required stubs.
Fixes: e6f67ce32e8e ("irqdomain: Add support for generic irq chips creation before publishing a domain")
Reported-by: Borislav Betkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When an SVSM is present, the guest can also request attestation reports
from it. These SVSM attestation reports can be used to attest the SVSM
and any services running within the SVSM.
Extend the config-fs attestation support to provide such. This involves
creating four new config-fs attributes:
- 'service-provider' (input)
This attribute is used to determine whether the attestation request
should be sent to the specified service provider or to the SEV
firmware. The SVSM service provider is represented by the value
'svsm'.
- 'service_guid' (input)
Used for requesting the attestation of a single service within the
service provider. A null GUID implies that the SVSM_ATTEST_SERVICES
call should be used to request the attestation report. A non-null
GUID implies that the SVSM_ATTEST_SINGLE_SERVICE call should be used.
- 'service_manifest_version' (input)
Used with the SVSM_ATTEST_SINGLE_SERVICE call, the service version
represents a specific service manifest version be used for the
attestation report.
- 'manifestblob' (output)
Used to return the service manifest associated with the attestation
report.
Only display these new attributes when running under an SVSM.
[ bp: Massage.
- s/svsm_attestation_call/svsm_attest_call/g ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/965015dce3c76bb8724839d50c5dea4e4b5d598f.1717600736.git.thomas.lendacky@amd.com
|
|
The TSM attestation report support provides multiple configfs attribute
types (both for standard and binary attributes) to allow for additional
attributes to be displayed for SNP as compared to TDX. With the ability
to hide attributes via configfs, consolidate the multiple attribute groups
into a single standard attribute group and a single binary attribute
group. Modify the TDX support to hide the attributes that were previously
"hidden" as a result of registering the selective attribute groups.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/8873c45d0c8abc35aaf01d7833a55788a6905727.1717600736.git.thomas.lendacky@amd.com
|
|
In order to support dynamic decisions as to whether an attribute should be
created, add a callback that returns a bool to indicate whether the
attribute should be displayed. If no callback is registered, the attribute
is displayed by default.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/e555c8740a263fab9f83b2cbb44da1af49a2813c.1717600736.git.thomas.lendacky@amd.com
|
|
With the introduction of an SVSM, Linux will be running at a non-zero
VMPL. Any request for an attestation report at a higher privilege VMPL
than what Linux is currently running will result in an error. Allow for
the privlevel_floor attribute to be updated dynamically.
[ bp: Trim commit message. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/5a736be9384aebd98a0b7c929660f8a97cbdc366.1717600736.git.thomas.lendacky@amd.com
|
|
The core ASoC code does not modify contents of the
'auto_selectable_formats' array passed in 'struct snd_soc_dai_ops', so
make it const for code safety.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617125735.582963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MADT Multiprocessor Wakeup structure version 1 brings support for CPU offlining:
BIOS provides a reset vector where the CPU has to jump to for offlining itself.
The new TEST mailbox command can be used to test whether the CPU offlined itself
which means the BIOS has control over the CPU and can online it again via the
ACPI MADT wakeup method.
Add CPU offlining support for the ACPI MADT wakeup method by implementing custom
cpu_die(), play_dead() and stop_this_cpu() SMP operations.
CPU offlining makes it possible to hand over secondary CPUs over kexec, not
limiting the second kernel to a single CPU.
The change conforms to the approved ACPI spec change proposal. See the Link.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/all/13356251.uLZWGnKmhe@kreacher
Link: https://lore.kernel.org/r/20240614095904.1345461-19-kirill.shutemov@linux.intel.com
|
|
In order to support MADT wakeup structure version 1, provide more appropriate
names for the fields in the structure.
Rename 'mailbox_version' to 'version'. This field signifies the version of the
structure and the related protocols, rather than the version of the mailbox.
This field has not been utilized in the code thus far.
Rename 'base_address' to 'mailbox_address' to clarify the kind of address it
represents. In version 1, the structure includes the reset vector address. Clear
and distinct naming helps to prevent any confusion.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-15-kirill.shutemov@linux.intel.com
|
|
ACPI MADT doesn't allow to offline a CPU after it has been woken up.
Currently, CPU hotplug is prevented based on the confidential computing
attribute which is set for Intel TDX. But TDX is not the only possible user of
the wake up method. Any platform that uses ACPI MADT wakeup method cannot
offline CPU.
Disable CPU offlining on ACPI MADT wakeup enumeration.
This has no visible effects for users: currently, TDX guest is the only platform
that uses the ACPI MADT wakeup method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com
|
|
The ACPI MADT mailbox wakeup method doesn't allow to offline a CPU after
it has been woken up.
Currently, offlining is prevented based on the confidential computing attribute
which is set for Intel TDX. But TDX is not the only possible user of the wake up
method. The MADT wakeup can be implemented outside of a confidential computing
environment. Offline support is a property of the wakeup method, not the CoCo
implementation.
Introduce cpu_hotplug_disable_offlining() that can be called to indicate that
CPU offlining should be disabled.
This function is going to replace CC_ATTR_HOTPLUG_DISABLED for ACPI MADT wakeup
method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-4-kirill.shutemov@linux.intel.com
|
|
__irq_domain_add() has been replaced by irq_domain_instanciate() and so,
it is no more used.
Simply remove it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-21-herve.codina@bootlin.com
|
|
__irq_domain_add() wrappers use directly __irq_domain_add(). With the
introduction of irq_domain_instantiate(), __irq_domain_add() becomes
obsolete.
In order to fully remove __irq_domain_add(), convert wrappers to
irq_domain_instantiate()
[ tglx: Fixup struct initializers ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-18-herve.codina@bootlin.com
|
|
Add a devres version of irq_domain_instantiate().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-17-herve.codina@bootlin.com
|
|
The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.
Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
- Allocate generic irq chips with irq_alloc_domain_generic_chips()
- Retrieve the generic irq chips with irq_get_domain_generic_chip()
- Initialize retrieved chips: set register base address and offsets,
set several hooks such as irq_mask, irq_unmask, ...
With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.
In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com
|
|
Most of generic chip drivers need to perform some more additional
initializations on the generic chips allocated before they can be fully
ready.
These additional initializations need to be performed before the IRQ
domain is published to avoid a race condition between IRQ consumers and
suppliers.
Introduce the init() hook to perform these initializations at the right
place just after the generic chip creation. Also introduce the exit() hook
to allow reverting operations done by the init() hook just before the
generic chip is destroyed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-15-herve.codina@bootlin.com
|
|
The existing __irq_alloc_domain_generic_chips() uses a bunch of parameters
to describe the generic chips that need to be allocated.
Adding more parameters and wrappers to hide new parameters in the existing
code leads to more and more code without any relevant values and without
any flexibility.
Introduce irq_domain_alloc_generic_chips() where the generic chips
description is done using the irq_domain_chip_generic_info structure
instead of the bunch of parameters to allow flexibility and easy evolution.
Also introduce irq_domain_remove_generic_chips() to revert the operations
done by irq_domain_alloc_generic_chips().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-14-herve.codina@bootlin.com
|
|
The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.
Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com
|
|
irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.
In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com
|
|
To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.
Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com
|
|
In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.
Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com
|
|
The fwnode parameter has no reason to be a pointer to an un-const struct
fwnode_handle. Indeed, struct fwnode_handle is not supposed to be modified
by the function.
Be consistent with other function performing the same kind of operation
such as is_of_node(), is_acpi_device_node() or is_software_node(): constify
the fwnode parameter.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-5-herve.codina@bootlin.com
|
|
The existing irq_domain_add_*() functions used to instantiate an IRQ
domain are wrappers built on top of __irq_domain_add() and describe the
domain properties using a bunch of parameters.
Adding more parameters and wrappers to hide new parameters in the
existing code lead to more and more code without any relevant value and
without any flexibility.
Introduce irq_domain_instantiate() where the interrupt domain properties
are given using a irq_domain_info structure instead of the bunch of
parameters to allow flexibility and easy evolution.
irq_domain_instantiate() performs the same operation as the one done by
__irq_domain_add(). For compatibility reason with existing code, keep
__irq_domain_add() but convert it to irq_domain_instantiate().
[ tglx: Fixed up struct initializer coding style ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-3-herve.codina@bootlin.com
|
|
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325163810.669459-1-costa.shul@redhat.com
|
|
Update peci subsystem to use the same vendor-family-model
combined definition that core x86 code uses.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20240529171920.62571-1-tony.luck@intel.com
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
|
|
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I find the behavior of xa_for_each_start() slightly counter-intuitive.
It doesn't end the iteration by making the index point after the last
element. IOW calling xa_for_each_start() again after it "finished"
will run the body of the loop for the last valid element, instead
of doing nothing.
This works fine for netlink dumps if they terminate correctly
(i.e. coalesce or carefully handle NLM_DONE), but as we keep getting
reminded legacy dumps are unlikely to go away.
Fixing this generically at the xa_for_each_start() level seems hard -
there is no index reserved for "end of iteration".
ifindexes are 31b wide, tho, and iterator is ulong so for
for_each_netdev_dump() it's safe to go to the next element.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'struct mtk_adsp_ipc_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct mtk_adsp_ipc" also needs to be adjusted to this
new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15533 2383 0 17916 45fc sound/soc/sof/mediatek/mt8195/mt8195.o
After:
=====
text data bss dec hex filename
15557 2367 0 17924 4604 sound/soc/sof/mediatek/mt8195/mt8195.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/a45d6b2b5ec040ea0fc78fca662c2dca3f13a49f.1718312321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the driver core and sysfs fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc and iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is for for-next branch.
The selfIDComplete event occurs in the bus managed by one of 1394 OHCI
controller in Linux system, while the existing tracepoints events has
the lack of data about it to distinguish the issued hardware from the
others.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240614004251.460649-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
It is helpful to trace the content of self ID sequence when the core
function building bus topology.
This commit adds a tracepoints event fot the purpose. It seems not to
achieve printing variable length of array in print time without any
storage, thus the structure of event includes a superfluous array to store
the state of port. Additionally, there is no helper function to print
symbol array, thus the state of port is printed as raw value.
Link: https://lore.kernel.org/r/20240605235155.116468-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
It is a bit inconvenient to put the relative path to local header from
tree-wide header.
This commit delegates the selection to include headers into users.
Link: https://lore.kernel.org/r/20240605235155.116468-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Currently compiling block/blk-settings.c with C=1 gives the following
warning:
block/blk-settings.c:262:9: warning: context imbalance in 'queue_limits_commit_update' - wrong count at exit
request_queue.limits_lock is a mutex. Sparse locking annotation for
mutexes are currently not supported - see [0] - so drop that locking
annotation.
[0] https://lore.kernel.org/lkml/cover.1579893447.git.jbi.octave@gmail.com/T/#mbb8bda6c0a7ca7ce19f46df976a8e3b489745488
Fixes: d690cb8ae14bd ("block: add an API to atomically update queue limits")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240614090345.655716-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The work flags can be set/accessed from different tasks, both the
originator of the request, and the io-wq workers. While modifications
aren't concurrent, it still makes KMSAN unhappy. There's no real
downside to just making the flag reading/manipulation use proper
atomics here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is pretty nicely abstracted already, but let's move it to a separate
file rather than have it in the main io_uring file. With that, we can
also move the io_ev_fd struct and enum out of global scope.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 19a63c402170 ("io_uring/rsrc: keep one global dummy_ubuf")
replaced it with a global static object but this stayed behind.
Fixes: 19a63c402170 ("io_uring/rsrc: keep one global dummy_ubuf")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240523214517.31803-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
- Update tracepoints events introduced in v6.10-rc1 so that it includes
the numeric identifier of host card in which the event happens
- replace wiki URL with the current website URL in Kconfig
* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: record card index in bus_reset_handle tracepoints event
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
firewire: core: record card index in async_phy_inbound tracepoints event
firewire: core: record card index in async_phy_outbound_complete tracepoints event
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
firewire: fix website URL in Kconfig
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/250466af94f4989d638fab168e246035530e912f.1718301543.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
From: Leon Romanovsky <leonro@nvidia.com>
Internal mlx5_ib resources are created during mlx5_ib module load. This
behavior is not optimal because it consumes resources that are not
needed when SFs are created. This patch series delays the creation of
mlx5_ib internal resources to the stage when they actually used.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The test of write combining was added before in mlx5_ib driver. It
opens UD QP and posts NOP WQEs, and uses BlueFlame doorbell. When
BlueFlame is used, WQEs get written directly to a PCI BAR of the
device (in addition to memory) so that the device handles them without
having to access memory.
In this test, the WQEs written in memory are different from the ones
written to the BlueFlame which request CQE update. By checking the
completion reports posted on CQ, we can know if BlueFlame succeeds or
not. The write combining must be supported if BlueFlame succeeds as
its register is written using write combining.
This patch reimplements the test in the same way, but using a pair of
SQ and CQ only. It is moved to mlx5_core as a general feature used by
both mlx5_core and mlx5_ib.
Besides, save write combine test result of the PCI function, so that
its thousands of child functions such as SF can query without paying
the time and resource penalty by itself. The test function is called
only after failing to get the cached result. With this enhancement,
all thousands of SFs of the PF attached to same driver no longer need
to perform WC check explicitly, which is already done in the system.
This saves several commands per SF, thereby speeds up SF creation and
also saves completion EQ creation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/4ff5a8cc4c5b5b0d98397baa45a5019bcdbf096e.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing
Jonathan writes:
IIO: 1st set of new device support, cleanups etc for 6.11
Lots of new device support and 3 entirely new drivers.
Early pull request this cycle to allow for clean picking up of fixes
that are dependencies for some queued patch sets.
Device support
==============
adi,ad3552r
- Add AD3541R and AD3551R - single output variants of already supported
DACs.
adi,ad7192
- Add support for ad7194 24-bit ADC with integrated PGA.
adi,ad7380
- New ADC driver built up in a number of steps. Supports
- 2 channel differential ADCs: AD7380, AD7381
- 4 channel differential ADCs: AD7380-4, AD7381-4
- 2 channel pseudo-differential ADCs: AD7383, AD7384
- 4 channel pseudo-differential ADCs: AD7383-4, AD7384-4
adi,adis16475
- Support ADS16501 variant - ID and some different scale factors from
parts already supported.
- Driver refactoring then enables support for 6 more IMUs:
- ADIS16575-[2,3]
- ADIS16576-[2,3]
- ADIS16577-[2,3]
adi,adsi16480
- Driver refactoring and feature additions leading to support for 6 more
IMUs - with new delta angle and delta velocity feature:
- ADIS16545-[1,2,3]
- ADIS16547-[1,2,3]
bosch,bmi160
- Support for the bmi120 IMU: ID only. Also relax ID checking to warn
only on mismatch allowing use of fallback compatibles for new devices.
sciosense,ens160
- New driver for this metal oxide multi-gas sensor for indoor
air quality monitoring.
sensortek,stk3110
- Support for stk3311a and stk3311s34 light sensor variants. Relax ID
checking to warn only on a mismatch allowing use of fallback compatibles
for new devices.
vishay,veml6040
- New driver for this RGBW light sensor. Note that whilst the register
interface is very different, the dt-binding similar enough that it is
shared with the existing vishay,veml6075 binding
x-powers,axp20x
- Add support for axp192, very similar to another supported PMIC ADC variant
but with a few more GPIO channels.
Dt-binding only
===============
ti,ads1015
- Add binding (no driver support yet) for ti,tla2021
New features
============
core
- Variable scan type support. We have papered over this for a long time
so good to finally resolve it.
Some devices will change their data output format (typically resolution)
dependent on settings such as oversampling. A new callback is added
to enable this. First used in the ad7380 driver.
- Harden the core against missing callback functions.
dt-binding:
- Add a single-channel property that can be used in per channel nodes
instead of reg to indicate which device channel. This is important
in devices with a mixture of differential and single ended channels
as reg already just acted as an index for the differential channels
making things inconsistent if it had more meaning for single ended
channels.
adi,ad7380
- Use spi_optimize_message() to reduce reading message setup overhead.
- Add oversampling support using the new core functionality to allow
a device support multiple scan types.
invense,icm42600
- Support for low-power accelerometer modes. When a given sampling
frequency is only supported at one power mode, use that. Otherwise
default to low power at the cost of some noise unless overridden
via a new sysfs attribute.
silicon-labs,si70720
- Add control of the heater.
Cleanups and minor fixes
========================
core
- Cleanup use of sizeof(struct xxxx) in favor of sizeof(*variable)
Makefile
- Resort the iio/adc/Makefile which has drifted away from alphabetical
order.
gts library
- Fix sorting of lists with a zero in the middle. Doesn't happen with
upstream drivers, but good to harden this code. Add a related unit test.
multiple drivers
- Add missing MODULE_DESCRIPTION()
- Drop some unused structure fields.
- Drop some entirely unused structure definitions.
- Stop pointless initialization of i2c_device_id::driver_data to 0 in drivers
where it isn't used.
- Use spi_get_device_match_data() to replace open-coded equivalent.
adi,ad3552r
- Fix dt gain parameter names to reflect what the driver does. Note
discussion in patch to justify fixing it in the binding not the
driver.
- Tidy up some naming.
adi,ad7192
- Use read_avail() callback to handle the low pass filter.
- Add an aincom supply for pseudo differential operation.
adi,ad7606
- Use iio_device_claim_direct_scoped() to simplify error paths.
adi,ad7944
- Drop an unused function parameter.
adi,adrf6780
- Drop unused header.
adi,ad9467
- Use a DMA safe buffer for SPI transfers.
- Stop using tabs to pad structure field names. It was creating a lot
of noise.
adi,axi-adc
- Prevent races between enable and disable calls.
- Ensure the DRP (dynamic reconfiguration port) is locked. Not used
in most real designs, but better safe than sorry.
- Limit build to COMPILE_TEST or platforms for which the IP exists.
adi,axi-dac
- Limit build to COMPILE_TEST or platforms for which the IP exists.
ams,iaq
- Use __packed instead of ___attribute__((__packed__))
bosch,bmp280
- White space cleanup.
- Use BME280 prefix for registers that do not exist on the BMP280.
- Add parameter names to callback function definitions.
- Rename measure function to better reflect what it does which is wait
for a measurement to happen.
- Drop a redundant error check.
- Improve error messages
- Make error checks consistent as if (ret)
- Use unsigned types for inherently unsigned data.
- Refactor reading functions to not rely on a hidden t_fine variable.
- Make use of cleanup.h
freescale,mma7660
- Add mount matrix support.
invense,icm42600
- Enable the regmap cache to reduce bus accesses.
amlogic,meson-saradc
- Add dt-binding support for power-domains.
ti,adc161s626
- Use iio_device_claim_direct_scoped() to simplify error handling.
* tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: imu: inv_icm42600: add support of accel low-power mode
iio: document inv_icm42600 driver private sysfs attributes
MAINTAINERS: Add ScioSense ENS160
iio: chemical: ens160: add power management support
iio: chemical: ens160: add triggered buffer support
iio: chemical: add driver for ENS160 sensor
dt-bindings: iio: chemical: add ENS160 sensor
dt-bindings: vendor-prefixes: add ScioSense
iio: temperature: mcp9600: add threshold events support
dt-bindings: iio: light: add VEML6040 RGBW-LS
iio: light: driver for Vishay VEML6040
dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
iio: dac: adi-axi-dac: add platform dependencies
iio: adc: adi-axi-adc: add platform dependencies
iio: imu: inv_icm42600: add register caching in the regmap
iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
iio: dac: max5522: simplify with spi_get_device_match_data()
iio: addac: ad74413r: simplify with spi_get_device_match_data()
iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Leon Romanovsky says:
====================
net: mana: Allow variable size indirection table
Like we talked, I created new shared branch for this patch:
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared
* 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Allow variable size indirection table
====================
Link: https://lore.kernel.org/all/20240612183051.GE4966@unreal
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce numa_valid_node(nid) that verifies that nid is a valid node ID
and use that instead of comparing nid parameter with either NUMA_NO_NODE
or MAX_NUMNODES.
This makes the checks for valid node IDs consistent and more robust and
allows to get rid of multiple WARNings.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Add comment to ecc_digits_from_bytes kdoc that the first byte is expected
to hold the most significant bits of the large integer that is converted
into an array of digits.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The 'struct list' type is defined in types.h, no need to include list.h
for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
