| Age | Commit message (Collapse) | Author |
|---|
|
'clk-rockchip' into clk-next
* clk-counted:
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
* clk-imx:
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: imx: add i.MX95 BLK CTL clk driver
dt-bindings: clock: support i.MX95 Display Master CSR module
dt-bindings: clock: support i.MX95 BLK CTL module
dt-bindings: clock: add i.MX95 clock header
clk: imx: imx8mp: Add pm_runtime support for power saving
* clk-amlogic:
clk: meson: s4: fix module autoloading
clk: meson: fix module license to GPL only
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
clk: meson: add vclk driver
clk: meson: pll: print out pll name when unable to lock it
clk: meson: s4: pll: determine maximum register in regmap config
clk: meson: s4: peripherals: determine maximum register in regmap config
clk: meson: a1: pll: determine maximum register in regmap config
clk: meson: a1: peripherals: determine maximum register in regmap config
* clk-binding:
dt-bindings: clock: fixed: Define a preferred node name
* clk-rockchip:
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
clk: rockchip: rk3588: Add reset line for HDMI Receiver
clk: rockchip: rk3568: Add missing USB480M_PHY mux
dt-bindings: reset: Define reset id used for HDMI Receiver
dt-bindings: clock: rockchip: add USB480M_PHY mux
|
|
clk-next
- STM32MP257 SoC clk driver
- Allocate clk_ops dynamically for SCMI clk driver
* clk-stm:
dt-bindings: clocks: stm32mp25: add access-controllers description
clk: stm32: introduce clocks for STM32MP257 platform
dt-bindings: clocks: stm32mp25: add description of all parents
clk: stm32mp13: use platform device APIs
* clk-renesas:
clk: renesas: r9a08g045: Add support for power domains
clk: renesas: rzg2l: Extend power domain support
dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S
dt-bindings: clock: r9a08g045-cpg: Add power domain IDs
dt-bindings: clock: r9a07g054-cpg: Add power domain IDs
dt-bindings: clock: r9a07g044-cpg: Add power domain IDs
dt-bindings: clock: r9a07g043-cpg: Add power domain IDs
clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT
clk: renesas: r8a7740: Remove unused div4_clk.flags field
clk: renesas: r9a07g043: Add clock and reset entry for PLIC
clk: renesas: r8a779h0: Add INTC-EX clock
clk: renesas: r8a779h0: Add MSIOF clocks
clk: renesas: r8a779a0: Fix CANFD parent clock
clk: rs9: fix wrong default value for clock amplitude
clk: renesas: r8a779h0: Add timer clocks
clk: renesas: r8a779h0: Add SCIF clocks
clk: renesas: r9a07g044: Mark resets array as const
clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const
clk: renesas: r8a779h0: Add thermal clock
dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks
* clk-scmi:
clk: scmi: Add support for get/set duty_cycle operations
clk: scmi: Add support for re-parenting restricted clocks
clk: scmi: Add support for rate change restricted clocks
clk: scmi: Add support for state control restricted clocks
clk: scmi: Allocate CLK operations dynamically
* clk-allwinner:
clk: sunxi-ng: fix module autoloading
clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate
clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
|
|
- Remove unused Interrupt Message Store (IMS) support (Bjorn Helgaas)
* pci/ims-removal:
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()"
Revert "PCI/MSI: Provide stubs for IMS functions"
|
|
- Move DBI accesses from dw_pcie_ep_init() to dw_pcie_ep_init_complete() so
drivers for endpoints that require Refclk for DBI access, e.g., qcom and
tegra194, can control when this happens (Manivannan Sadhasivam)
- Add endpoint API kernel-doc (Manivannan Sadhasivam)
- Remove .deinit() callback and instead call rcar_gen4_pcie_ep_deinit()
explicitly from rcar-gen4, which was the only user (Manivannan
Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to correspond with
dw_pcie_ep_init() (Manivannan Sadhasivam)
- Add dw_pcie_ep_cleanup() for drivers that need to clean up eDMA resources
when PERST# is asserted, e.g., qcom, tegra194 (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
better reflect the functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from drivers instead of from
dw_pcie_ep_init() so drivers, e.g., qcom and tegra194, can do it when
Refclk is available (Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which previously identified drivers
that required Refclk before DBI access, because it's now unnecessary
(Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: endpoint: Remove "core_init_notifier" flag
PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
PCI: dwc: ep: Add Kernel-doc comments for APIs
PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
|
|
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
|
|
- Add support for DOE Discovery version 2 (Alexey Kardashevskiy)
* pci/doe:
PCI/DOE: Support discovery version 2
|
|
- Lock the upstream bridge while using it to perform a Secondary Bus Reset
(Dave Jiang)
- Return failure when attempting Secondary Bus Reset below a CXL Port that
has SBR masked (Dave Jiang)
- Add a "cxl_bus" reset method that temporarily unmasks SBR (Dave Jiang)
- Add a warning if we reset a CXL type 3 memory device that was in use
while being reset (Dave Jiang)
* pci/cxl:
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
PCI/CXL: Add 'cxl_bus' reset method for devices below CXL Ports
PCI/CXL: Fail bus reset if upstream CXL Port has SBR masked
PCI: Lock upstream bridge for pci_reset_function()
PCI/CXL: Move CXL Vendor ID to pci_ids.h
|
|
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/213ebf62-53a3-42b7-8518-ecd5cd6d6b08@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
f646c2a0a668 ("PCI: Return u8 from pci_find_capability() and similar") and
ee8b1c478a9f ("PCI: Return u16 from pci_find_ext_capability() and similar")
updated the return type of the extern declarations, but neglected to update
the type of the stubs used when CONFIG_PCI is not enabled.
Update them to match the extern declarations.
Link: https://lore.kernel.org/r/20240327180234.1529164-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Replace the last references to PCI_IRQ_LEGACY with PCI_IRQ_INTX in pci.h
header file. With this change, PCI_IRQ_LEGACY is unused and we can remove
its definition.
Link: https://lore.kernel.org/r/20240325070944.3600338-29-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
|
|
When debugging GPU hangs Mesa developers are finding it useful to replay
the captured error state against the simulator. But due various simulator
limitations which prevent replicating all hangs, one step further is being
able to replay against a real GPU.
This is almost doable today with the missing part being able to upload the
captured context image into the driver state prior to executing the
uploaded hanging batch and all the buffers.
To enable this last part we add a new context parameter called
I915_CONTEXT_PARAM_CONTEXT_IMAGE. It follows the existing SSEU
configuration pattern of being able to select which context to apply
against, paired with the actual image and its size.
Since this is adding a new concept of debug only uapi, we hide it behind
a new kconfig option and also require activation with a module parameter.
Together with a warning banner printed at driver load, all those combined
should be sufficient to guard against inadvertently enabling the feature.
In terms of implementation we allow the legacy context set param to be
used since that removes the need to record the per context data in the
proto context, while still allowing flexibility of specifying context
images for any context.
Mesa MR using the uapi can be seen at:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27594
v2:
* Fix whitespace alignment as per checkpatch.
* Added warning on userspace misuse.
* Rebase for extracting ce->default_state shadowing.
v3:
* Rebase for I915_CONTEXT_PARAM_LOW_LATENCY.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145939.87427-2-tursulin@igalia.com
|
|
Pull workqueue updates from Tejun Heo:
- Work items can now be disabled and enabled, and cancel_work_sync()
and disable_work() can be called form atomic contexts for BH work
items.
This closes feature gap with tasklet and should allow converting all
existing tasklet users to BH workqueues.
- Improve pool sharing for unbound workqueues with strict affinity.
- Misc changes including doc updates, improved debug annotations and
cleanups.
* tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Use "@..." in function comment to describe variable length argument
workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead()
workqueue: remove unnecessary import and function in wq_monitor.py
workqueue: Introduce enable_and_queue_work() convenience function
workqueue: add function in event of workqueue_activate_work
workqueue: Cleanup subsys attribute registration
workqueue: Use list_last_entry() to get the last idle worker
workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict
workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead()
workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items
workqueue: Remember whether a work item was on a BH workqueue
workqueue: Remove WORK_OFFQ_CANCELING
workqueue: Implement disable/enable for (delayed) work items
workqueue: Preserve OFFQ bits in cancel[_sync] paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- The locking around cpuset hotplug processing has always been a bit of
mess which was worked around by making hotplug processing
asynchronous. The asynchronity isn't great and led to other issues.
We tried to make the behavior synchronous a while ago but that led to
lockdep splats. Waiman took another stab at cleaning up and making it
synchronous. The patch has been in -next for well over a month and
there haven't been any complaints, so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
selftests/cgroup: Drop define _GNU_SOURCE
docs: cgroup-v1: Update page cache removal functions
selftests/cgroup: fix uninitialized variables in test_zswap.c
selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
selftests/cgroup: fix clang warnings: uninitialized fd variable
selftests/cgroup: fix clang build failures for abs() calls
cgroup/cpuset: Remove outdated comment in sched_partition_write()
cgroup/cpuset: Fix incorrect top_cpuset flags
cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
cgroup/cpuset: Statically initialize more members of top_cpuset
cgroup: Avoid unnecessary looping in cgroup_no_v1()
cgroup, legacy_freezer: update comment for freezer_css_offline()
docs, cgroup: add entries for pids to cgroup-v2.rst
cgroup: don't call cgroup1_pidlist_destroy_all() for v2
cgroup_freezer: update comment for freezer_css_online()
cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
cgroup/pids: Remove superfluous zeroing
docs: cgroup-v1: Fix description for css_online
...
|
|
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
This reverts commit e23d4192bf9b612bce5b24f22719fd3cc6edaa69.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This reverts commit 0194425af0c87acaad457989a2c6d90dba58e776.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa431244f ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This reverts commit c9e5bea273834a63b5e9ba90ad94b305ba50704e.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa431244f ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This reverts commit 41efa431244f6498833ff8ee8dde28c4924c5479.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, this could be squashed with these commits:
0194425af0c8 ("PCI/MSI: Provide IMS (Interrupt Message Store) support")
c9e5bea27383 ("PCI/MSI: Provide pci_ims_alloc/free_irq()")
which added the non-stub implementations.
Link: https://lore.kernel.org/r/20240410221307.2162676-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Three CXL mailbox passthrough commands are added to support the
populating and clearing of vendor debug logs:
- Get Log Capabilities
- Get Supported Log Sub-List Commands
- Clear Log
- Add support of Device Phyiscal Address (DPA) to Host Physical Address
(HPA) translation for CXL events of cxl_dram and cxl_general media.
This allows user space to figure out which CXL region the event
occured via trace event.
- Connect CXL to CPER reporting.
If a device is configured for firmware first, CXL event records are
not sent directly to the host. Those records are reported through EFI
Common Platform Error Records (CPER). Add support to route the CPER
records through the CXL sub-system in order to provide DPA to HPA
translation and also event decoding and tracing. This is useful for
users to determine which system issues may correspond to specific
hardware events.
- A number of misc cleanups and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl/cper: Remove duplicated GUID defines
cxl/cper: Fix non-ACPI-APEI-GHES build
cxl/pci: Process CPER events
acpi/ghes: Process CXL Component Events
cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
cxl/acpi: Cleanup __cxl_parse_cfmws()
cxl/region: Fix cxlr_pmem leaks
cxl/core: Add region info to cxl_general_media and cxl_dram events
cxl/region: Move cxl_trace_hpa() work to the region driver
cxl/region: Move cxl_dpa_to_region() work to the region driver
cxl/trace: Correct DPA field masks for general_media & dram events
MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
cxl/hdm: Debug, use decoder name function
cxl: Fix use of phys_to_target_node() for x86
cxl/hdm: dev_warn() on unsupported mixed mode decoder
cxl/test: Enhance event testing
cxl/hdm: Add debug message for invalid interleave granularity
cxl: Fix compile warning for cxl_security_ops extern
cxl/mbox: Add Clear Log mailbox command
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"The changes include removing duplicate code and updating the nvdimm
tree to the current kernel interfaces such as using const for struct
device_type and changing the platform remove callback signature"
* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove redundant assignment to variable rc
ndtest: Convert to platform remove callback returning void
nvdimm/btt: always set max_integrity_segments
nvdimm: remove nd_integrity_init
dax: constify the struct device_type usage
powerpc/papr_scm: Move duplicate definitions to common header files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
|
The current mipi_dsi_*_write_seq() macros are non-intutitive because
they contain a hidden "return" statement that will return out of the
_caller_ of the macro. Let's mark them as deprecated and instead
introduce some new macros that are more intuitive.
These new macros are less optimal when an error occurs but should
behave more optimally when there is no error. Specifically these new
macros cause smaller code to get generated and the code size savings
(less to fetch from RAM, less cache space used, less RAM used) are
important. Since the error case isn't something we need to optimize
for and these new macros are easier to understand and more flexible,
they should be used.
After converting to use these new functions, one example shows some
nice savings while also being easier to understand.
$ scripts/bloat-o-meter \
...after/panel-novatek-nt36672e.ko \
...ctx/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988)
Function old new delta
nt36672e_1080x2408_60hz_init 6236 5248 -988
Total: Before=10651, After=9663, chg -9.28%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
|
|
Through a cooperative effort between Hsin-Yi Wang and Dmitry
Baryshkov, we have realized the dev_err() in the
mipi_dsi_*_write_seq() macros was causing quite a bit of bloat to the
kernel. Let's hoist this call into drm_mipi_dsi.c by adding a "chatty"
version of the functions that includes the print. While doing this,
add a bit more comments to these macros making it clear that they
print errors and also that they return out of _the caller's_ function.
Without any changes to clients this gives a nice savings. Specifically
the macro was inlined and thus the error report call was inlined into
every call to mipi_dsi_dcs_write_seq() and
mipi_dsi_generic_write_seq(). By using a call to a "chatty" function,
the usage is reduced to one call in the chatty function and a function
call at the invoking site.
Building with my build system shows one example:
$ scripts/bloat-o-meter \
.../before/panel-novatek-nt36672e.ko \
.../after/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-4404 (-4404)
Function old new delta
nt36672e_1080x2408_60hz_init 10640 6236 -4404
Total: Before=15055, After=10651, chg -29.25%
Note that given the change in location of the print it's harder to
include the "cmd" in the printout for mipi_dsi_dcs_write_seq() since,
theoretically, someone could call the new chatty function with a
zero-size array and it would be illegal to dereference data[0].
There's a printk format to print the whole buffer and this is probably
more useful for debugging anyway. Given that we're doing this for
mipi_dsi_dcs_write_seq(), let's also print the buffer for
mipi_dsi_generic_write_seq() in the error case.
It should be noted that the current consensus of DRM folks is that the
mipi_dsi_*_write_seq() should be deprecated due to the non-intuitive
return behavior. A future patch will formally mark them as deprecated
and provide an alternative.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.4.Id15fae80582bc74a0d4f1338987fa375738f45b9@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.4.Id15fae80582bc74a0d4f1338987fa375738f45b9@changeid
|
|
We really don't expect these errors to be printed over and over
again. When a driver hits the error it should bail out. Just use a
normal error print.
This gives a nice space savings for users of these functions:
$ scripts/bloat-o-meter \
.../before/panel-novatek-nt36672e.ko \
.../after/panel-novatek-nt36672e.ko
add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-16760 (-16760)
Function old new delta
nt36672e_1080x2408_60hz_init 17080 10640 -6440
nt36672e_1080x2408_60hz_init._rs 10320 - -10320
Total: Before=31815, After=15055, chg -52.68%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.3.I9982cd5d8014de7a4513f5619f66f88da49ce4ec@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.3.I9982cd5d8014de7a4513f5619f66f88da49ce4ec@changeid
|
|
The mipi_dsi_generic_write_seq() macro makes a call to
mipi_dsi_generic_write() which returns a type ssize_t. The macro then
stores it in an int and checks to see if it's negative. This could
theoretically be a problem if "ssize_t" is larger than "int".
To see the issue, imagine that "ssize_t" is 32-bits and "int" is
16-bits, you could see a problem if there was some code out there that
looked like:
mipi_dsi_generic_write_seq(dsi, <32768 bytes as arguments>);
...since we'd get back that 32768 bytes were transferred and 32768
stored in a 16-bit int would look negative.
Though there are no callsites where we'd actually hit this (even if
"int" was only 16-bit), it's cleaner to make the types match so let's
fix it.
Fixes: a9015ce59320 ("drm/mipi-dsi: Add a mipi_dsi_dcs_write_seq() macro")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.2.Iadb65b8add19ed3ae3ed6425011beb97e380a912@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.2.Iadb65b8add19ed3ae3ed6425011beb97e380a912@changeid
|
|
The mipi_dsi_dcs_write_seq() macro makes a call to
mipi_dsi_dcs_write_buffer() which returns a type ssize_t. The macro
then stores it in an int and checks to see if it's negative. This
could theoretically be a problem if "ssize_t" is larger than "int".
To see the issue, imagine that "ssize_t" is 32-bits and "int" is
16-bits, you could see a problem if there was some code out there that
looked like:
mipi_dsi_dcs_write_seq(dsi, cmd, <32767 bytes as arguments>);
...since we'd get back that 32768 bytes were transferred and 32768
stored in a 16-bit int would look negative.
Though there are no callsites where we'd actually hit this (even if
"int" was only 16-bit), it's cleaner to make the types match so let's
fix it.
Fixes: 2a9e9daf7523 ("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Use more informative names for the livepatch transition states
* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Rename KLP_* to KLP_TRANSITION_*
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
|
|
Pull smb client updates from Steve French:
- three important fixes to recent netfs conversion to fix various
xfstest failures, and rmmod oops
- cleanup patch to fix various GCC-14 warnings
* tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix perf regression with cached writes with netfs conversion
cifs: Fix locking in cifs_strict_readv()
cifs: Change from mempool_destroy to mempool_exit for request pools
smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb,
omap2 and sh7760fb, as well as the addition of some HAS_IOPORT
dependencies and adjustment of generated logo file to make build
reproducible"
* tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: offb: replace of_node_put with __free(device_node)
fbdev: savage: Handle err return when savagefb_check_var failed
video: hdmi: prefer length specifier in format over string copying
fbdev: uvesafb: replace deprecated strncpy with strscpy_pad
fbdev: au1200fb: replace deprecated strncpy with strscpy
fbdev: fsl-diu-fb: replace deprecated strncpy with strscpy_pad
video: logo: Drop full path of the input filename in generated file
fbdev: add HAS_IOPORT dependencies
fbdev: sh7760fb: allow modular build
fbdev: sisfb: hide unused variables
fbdev: shmobile: fix snprintf truncation
fbdev: omap2: replace of_graph_get_next_endpoint()
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
|
|
It's confusing for INTEL_RPLP_IDS() to include INTEL_RPLU_IDS(). Even if
we treat them the same elsewhere, the lists of PCI IDs should not.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/28fe0910efb93a28c400728af14beff015667f42.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most other PCI ID macros do not encode the gen in the name. Follow suit
for TGL.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/044a5c553dc4564431bbef197d5e2dd085624fc2.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most other PCI ID macros do not encode the gen in the name. Follow suit
for ICL.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36973674bf333dfdd7cd32ae656754bfa150022b.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It's confusing for INTEL_CFL_IDS() to include all WHL and CML PCI
IDs. Even if we treat them the same in a lot of places, CML is a
platform of its own, and the lists of PCI IDs should not conflate them.
Largely go by the idea that if a platform has a name, group its PCI IDs
together.
That said, AML is special, having both KBL and CFL variants. Leave that
alone.
v2: Also split out WHL not just CML (Rodrigo)
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7cca91dc78ed2b5982f14e400f03a1704645e475.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add INTEL_IVB_IDS() to identify all IVBs except IVB Q transcode.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed89a25b2c6bce318fe59e883d18b62d9453196b.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add INTEL_SNB_IDS() to identify all SNBs.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffcb2d954ad9bca78ccd39836dc0a3dc7c6c0253.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most other PCI ID macros use platform acronyms. Follow suit for ILK. Add
INTEL_ILK_IDS() to identify all ILKs.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/27ada56363cfa6a5b093cb31908a4b89aa912621.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most other PCI ID macros use platform acronyms. Follow suit for PNV. Add
INTEL_PNV_IDS() to identify all PNVs.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f9b34a2cd388244be03263a5147776bfe64d5ac.1715340032.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Two IMA changes, one EVM change, a use after free bug fix, and a code
cleanup to address "-Wflex-array-member-not-at-end" warnings:
- The existing IMA {ascii, binary}_runtime_measurements lists include
a hard coded SHA1 hash. To address this limitation, define per TPM
enabled hash algorithm {ascii, binary}_runtime_measurements lists
- Close an IMA integrity init_module syscall measurement gap by
defining a new critical-data record
- Enable (partial) EVM support on stacked filesystems (overlayfs).
Only EVM portable & immutable file signatures are copied up, since
they do not contain filesystem specific metadata"
* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add crypto agility support for template-hash algorithm
evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
ima: re-evaluate file integrity on file metadata change
evm: Store and detect metadata inode attributes changes
ima: Move file-change detection variables into new structure
evm: Use the metadata inode to calculate metadata hash
evm: Implement per signature type decision in security_inode_copy_up_xattr
security: allow finer granularity in permitting copy-up of security xattrs
ima: Rename backing_inode to real_inode
integrity: Avoid -Wflex-array-member-not-at-end warnings
ima: define an init_module critical data record
ima: Fix use-after-free on a dentry's dname.name
|
|
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer produces this report:
[ 65.194362] ------------[ cut here ]------------
[ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9
[ 65.203607] -2147483648 * 177 cannot be represented in type 'int'
[ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 65.219923] Call Trace:
[ 65.221556] <TASK>
[ 65.223029] dump_stack_lvl+0x93/0xd0
[ 65.225573] handle_overflow+0x171/0x1b0
[ 65.228219] sr_select_speed+0xeb/0xf0
[ 65.230786] ? __pm_runtime_resume+0xe6/0x130
[ 65.233606] sr_block_ioctl+0x15d/0x1d0
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the kernel
with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer").
Firstly, let's change the type of "speed" to unsigned long as
sr_select_speed()'s only caller passes in an unsigned long anyways.
$ git grep '\.select_speed'
| drivers/scsi/sr.c: .select_speed = sr_select_speed,
...
| static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi,
| unsigned long arg)
| {
| ...
| return cdi->ops->select_speed(cdi, arg);
| }
Next, let's add an extra check to make sure we don't exceed 0xffff/177
(350) since 0xffff is the max speed. This has two benefits: 1) we deal
with integer overflow before it happens and 2) we properly respect the
max speed of 0xffff. There are some "magic" numbers here but I did not
want to change more than what was necessary.
Link: https://github.com/llvm/llvm-project/pull/82432 [1]
Closes: https://github.com/KSPP/linux/issues/357
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
|
Add definitions for panel replay selective update
v2: Remove unnecessary Cc from commit message
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-6-jouni.hogander@intel.com
|
