| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2015-08-17
1) Fix IPv6 ECN decapsulation for IPsec interfamily tunnels.
From Thomas Egerer.
2) Use kmemdup instead of duplicating it in xfrm_dump_sa().
From Andrzej Hajda.
3) Pass oif to the xfrm lookups so that it gets set on the flow
and the resolver routines can match based on oif.
From David Ahern.
4) Add documentation for the new xfrm garbage collector threshold.
From Alexander Duyck.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Voltage tolerance isn't necessarily same on both sides of the target
voltage and regulator_set_voltage_tol() wouldn't be suitable in such
cases.
Add another routine regulator_set_voltage_triplet(), which accepts
target, min and max voltages as arguments.
This first tries to set the voltage between the target voltage and the
upper limit, then fall back on the full range. The idea behind this is
to set regulator's voltage as close to the target voltage, as possible.
Based on regulator_set_voltage_tol().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are some errors in the docbook comments in workqueue.h that cause
warnings when the docs are built; this only recently came to light because
these comments were not used until now. Fix the comments to make the
warnings go away.
The "args..." "fix" is a hack. kerneldoc doesn't deal properly with named
variadic arguments in macros, so all I've really achieved here is to make
it shut up. Fixing kerneldoc will have to wait for more time.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 7b0ce60c0b20 ("SUNRPC: Drop double-underscores from rpc_cmp_addr{4|6}()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Sparse builds have been warning for a really long time now
that etherdevice.h has a conversion that is unsafe.
include/linux/etherdevice.h:79:32: warning: restricted __be16 degrades to integer
This code change fixes the issue and generates the exact
same assembly before/after (checked on x86_64)
Fixes: 2c722fe1c821 (etherdevice: Optimize a few is_<foo>_ether_addr functions)
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This private net_device flag can be set by drivers to inform that a
device runs fine without a qdisc attached. This was formerly done by
setting tx_queue_len to zero.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NFS: NFS over RDMA Client Side Changes
These patches improve both client performance and scalability, most notably
by increasing the maixmum allowed rsize and wsize and by increasing the number
of RDMA "credits". There are also several bugfixes, such as correcting how
WRITE compounds are encoded and fixing large NFS symlink operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
And call nfs_file_clear_open_context() directly. This makes it obvious
that nfs_file_release() will always return 0.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This function is to help determine if two sockaddrs are really the same
socket.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
I'm planning on using these functions inside the client, so remove the
underscores to make it feel like I'm using a public interface.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The conversion between struct timespec and jiffies is not year 2038
safe on 32bit systems. Introduce timespec64_to_jiffies() and
jiffies_to_timespec64() functions which use struct timespec64 to
make it ready for 2038 issue.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The current_kernel_time() is not year 2038 safe on 32bit systems
since it returns a timespec value. Introduce current_kernel_time64()
which returns a timespec64 value.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The struct itimerspec is not year 2038 safe on 32bit systems due to
the limitation of the struct timespec members. Introduce itimerspec64
which uses struct timespec64 instead and provide conversion functions.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing
Chanwoo writes:
Update extcon for v4.3
This patchset include the function update of extcon drivers without critical
update and fix minor issue of extcon drivers.
Detailed description for patchset:
1. Update the extcon drivers:
- Update the logic of microphone detection for extcon-arizona driver
- Support GPIO based USB ID detection of extcon-palmas driver
2. Fix minor issues:
- Clean code and remove the opitonal print_state() function pointer from extcon
core driver
- Clear interrupt bit state before requesting irq on extcon-max778433 driver
- Fix signedness bugs of extcon core driver
|
|
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There are a couple of uses of struct scatterlist that never go to
the dma_map_sg() helper and thus don't care about ARCH_HAS_SG_CHAIN
which indicates that we can map chained S/G list.
The most important one is the crypto code, which currently has
to open code a few helpers to always allow chaining. This patch
removes a few #ifdef ARCH_HAS_SG_CHAIN statements so that we can
switch the crypto code to these common helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Clean up kerneldoc in preparation for including the PWM documentation in
DocBook.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Remove useless tabs used for padding in structure definitions as well as
some blank lines.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Since IRQ chip helpers were introduced drivers lose ability to
register separate lockdep classes for each registered GPIO IRQ
chip and the gpiolib now is using shared lockdep class for
all GPIO IRQ chips (gpiochip_irq_lock_class).
As result, lockdep will produce warning when there are min two
stacked GPIO chips and all of them are interrupt controllers.
HW configuration which generates lockdep warning (TI dra7-evm):
[SOC GPIO bankA.gpioX]
<- irq - [pcf875x.gpioY]
<- irq - DevZ.enable_irq_wake(pcf_gpioY_irq);
The issue was reported in [1] and discussed [2].
=============================================
[ INFO: possible recursive locking detected ]
4.2.0-rc6-00013-g5d050ed-dirty #55 Not tainted
---------------------------------------------
sh/63 is trying to acquire lock:
(class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94
but task is already holding lock:
(class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(class);
lock(class);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by sh/63:
#0: (sb_writers#4){.+.+.+}, at: [<c016bbb8>] vfs_write+0x13c/0x164
#1: (&of->mutex){+.+.+.}, at: [<c01debf4>] kernfs_fop_write+0x4c/0x1a0
#2: (s_active#36){.+.+.+}, at: [<c01debfc>] kernfs_fop_write+0x54/0x1a0
#3: (pm_mutex){+.+.+.}, at: [<c009758c>] pm_suspend+0xec/0x4c4
#4: (&dev->mutex){......}, at: [<c03f77f8>] __device_suspend+0xd4/0x398
#5: (&gpio->lock){+.+.+.}, at: [<c009b940>] __irq_get_desc_lock+0x74/0x94
#6: (class){......}, at: [<c009b91c>] __irq_get_desc_lock+0x50/0x94
stack backtrace:
CPU: 0 PID: 63 Comm: sh Not tainted 4.2.0-rc6-00013-g5d050ed-dirty #55
Hardware name: Generic DRA74X (Flattened Device Tree)
[<c0016e24>] (unwind_backtrace) from [<c0013338>] (show_stack+0x10/0x14)
[<c0013338>] (show_stack) from [<c05f6b24>] (dump_stack+0x84/0x9c)
[<c05f6b24>] (dump_stack) from [<c00903f4>] (__lock_acquire+0x19c0/0x1e20)
[<c00903f4>] (__lock_acquire) from [<c0091098>] (lock_acquire+0xa8/0x128)
[<c0091098>] (lock_acquire) from [<c05fd61c>] (_raw_spin_lock_irqsave+0x38/0x4c)
[<c05fd61c>] (_raw_spin_lock_irqsave) from [<c009b91c>] (__irq_get_desc_lock+0x50/0x94)
[<c009b91c>] (__irq_get_desc_lock) from [<c009c4f4>] (irq_set_irq_wake+0x20/0xfc)
[<c009c4f4>] (irq_set_irq_wake) from [<c0393ac4>] (pcf857x_irq_set_wake+0x24/0x54)
[<c0393ac4>] (pcf857x_irq_set_wake) from [<c009c560>] (irq_set_irq_wake+0x8c/0xfc)
[<c009c560>] (irq_set_irq_wake) from [<c04a02ac>] (gpio_keys_suspend+0x70/0xd4)
[<c04a02ac>] (gpio_keys_suspend) from [<c03f6a00>] (dpm_run_callback+0x50/0x124)
[<c03f6a00>] (dpm_run_callback) from [<c03f7830>] (__device_suspend+0x10c/0x398)
[<c03f7830>] (__device_suspend) from [<c03f90f0>] (dpm_suspend+0x134/0x2f4)
[<c03f90f0>] (dpm_suspend) from [<c0096e20>] (suspend_devices_and_enter+0xa8/0x728)
[<c0096e20>] (suspend_devices_and_enter) from [<c00977cc>] (pm_suspend+0x32c/0x4c4)
[<c00977cc>] (pm_suspend) from [<c0096060>] (state_store+0x64/0xb8)
[<c0096060>] (state_store) from [<c01dec64>] (kernfs_fop_write+0xbc/0x1a0)
[<c01dec64>] (kernfs_fop_write) from [<c016b280>] (__vfs_write+0x20/0xd8)
[<c016b280>] (__vfs_write) from [<c016bb0c>] (vfs_write+0x90/0x164)
[<c016bb0c>] (vfs_write) from [<c016c330>] (SyS_write+0x44/0x9c)
[<c016c330>] (SyS_write) from [<c000f500>] (ret_fast_syscall+0x0/0x54)
Lets fix it by using separate lockdep class for each registered GPIO
IRQ Chip. This is done by wrapping gpiochip_irqchip_add call into macros.
The implementation of this patch inspired by solution done by Nicolas
Boichat for regmap [3]
[1] http://www.spinics.net/lists/linux-gpio/msg05844.html
[2] http://www.spinics.net/lists/linux-gpio/msg06021.html
[3] http://www.spinics.net/lists/arm-kernel/msg429834.html
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roger Quadros <rogerq@ti.com>
Reported-by: Roger Quadros <rogerq@ti.com>
Tested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/tegra
iommu/tegra-smmu: Changes for v4.3-rc1
A bunch of improvements by Russell King, along with a fix to restore
display support when using the SMMU. This was due to the SMMU driver
writing the wrong value of active TLB lines, effectively disabling the
TLB and causing massive underflows on the display controller because
of the latency introduced by the SMMU.
|
|
This patch add a new quirk to add a s/w timer to notify the driver
to terminate current transfer and report a data timeout to the core,
if DTO interrupt does NOT come within the given time.
dw_mmc call mmc_request_done func to finish transfer depends on
DTO interrupt. If DTO interrupt does not come in sending data state,
the current transfer will be blocked.
We got the reply from synopsys:
There are two counters but both use the same value of [31:8] bits.
Data timeout counter doesn't wait for stop clock and you should get
DRTO even when the clock is not stopped.
Host Starvation timeout counter is triggered with stop clock condition.
This means that host should get DRTO and DTO interrupt.
But this case really exists, when driver reads tuning data from
card on RK3288-pink2 board. I measured waveforms by oscilloscope
and found that card clock was always on and data lines were always
holded high level in sending data state.
There are two possibility that data over interrupt doesn't come in
reading data state on RK3X SoCs:
- get command done interrupt, but doesn't get any data-related interrupt.
- get data error interrupt, but doesn't get data over interrupt.
Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
"blk_setting" doesn't use anywhere.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
The dw_mci_init_dma() may decide to not use dma, but pio instead, caused
by things like wrong dma settings in the system.
Till now the code dw_mci_init_slot() always assumed that dma is available
when CONFIG_MMC_DW_IDMAC was defined, ignoring the host->use_dma var
set during dma init.
So when now the dma init failed for whatever reason, the transfer sizes
would still be set for dma transfers, especially including the maximum
block-count calculated from host->ring_size and resulting in a
[ 4.991109] ------------[ cut here ]------------
[ 4.991111] kernel BUG at drivers/mmc/core/core.c:256!
[ 4.991113] Internal error: Oops - BUG: 0 [#1] SMP ARM
because host->ring_size is 0 in this case and the slot init code uses
the wrong code to calculate the values.
Fix this by selecting the correct calculations using the host->use_dma
variable instead of the CONFIG_MMC_DW_IDMAC config option.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
|
|
For Freescale QorIQ LS1021AQDS board, there is a SDIO interrupt
in the process of resume without inserting SD adapter because of
some unknown issue. But the driver doesn't assign sdio_irq_thread
pointer. This will block the resume of kernel. This patch is used
to avoid using NULL sdio_irq_thread pointer.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the (not so unlikely) case that the mmc controller timeout budget is
enough for exactly one erase-group, the simplification of allowing one
sector has an enormous performance penalty. We optimize this special case
by introducing a flag that prohibits erase-group boundary crossing, so
that we can allow trimming more than one sector at a time.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Inline function __dma_request_slave_channel_compat() doesn't modify "name"
argument but passes it to dma_request_slave_channel() which already takes
it as a constant.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
This adds new descriptor flag for reusing a descriptor by submitting
multiple times by a client, for example video buffer.
Add helper APIs for this as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by:Robert Jarzmik <robert.jarzmik@free.fr>
|
|
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone
has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the AEAD conversion is complete we can rip out the old
AEAD interafce and associated code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the helpers aead_init_geniv and aead_exit_geniv
which are type-safe and intended the replace the existing geniv
init/exit helpers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
into drm-next
A couple of fixes from the previous pull request as well as gl3 support.
There is one drm core change, an export of a previously private function.
Take 2 implementing screen targets, this time with the fbdev code adjusted
accordingly.
Also there is an implementation of register-driven command buffers, that
overrides the FIFO ring for command processing. It's needed for our upcoming
hardware revision.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: (35 commits)
drm/vmwgfx: Fix copyright headers
drm/vmwgfx: Add DX query support. Various fixes.
drm/vmwgfx: Add command parser support for a couple of DX commands
drm/vmwgfx: Command parser fixes for DX
drm/vmwgfx: Initial DX support
drm/vmwgfx: Update device includes for DX device functionality
drm: export the DRM permission check code
drm/vmwgfx: Fix crash when unloading vmwgfx v2
drm/vmwgfx: Fix framebuffer creation on older hardware
drm/vmwgfx: Fixed topology boundary checking for Screen Targets
drm/vmwgfx: Fix an uninitialized value
drm/vmwgfx: Fix compiler warning with 32-bit dma_addr_t
drm/vmwgfx: Kill a bunch of sparse warnings
drm/vmwgfx: Fix kms preferred mode sorting
drm/vmwgfx: Reinstate the legacy display system dirty callback
drm/vmwgfx: Implement fbdev on kms v2
drm/vmwgfx: Add a kernel interface to create a framebuffer v2
drm/vmwgfx: Avoid cmdbuf alloc sleeping if !TASK_RUNNING
drm/vmwgfx: Convert screen targets to new helpers v3
drm/vmwgfx: Convert screen objects to the new helpers
...
|
|
Linux 4.2-rc7
Backmerge master for i915 fixes
|
|
commit "nfc: st-nci: Rename st21nfcb to st-nci" adds
include/linux/platform_data/st_nci.h duplicated with
include/linux/platform_data/st-nci.h.
Only drivers/nfc/st-nci/i2c.c uses platform_data/st_nci.h.
Cc: stable@vger.kernel.org
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
|
|
This commits moves the Intersil/Techwell PCI vendor ID, and
the device IDs for the TW68 PCI video capture cards.
This will allow to support future Intersil/Techwell devices
without duplicating the IDs.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Platforms using the OMAP3 ISP have all switched to DT, drop platform
data support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Conversion to the use of pinned pfns made some functions unused. Remove
them. Also there's no need to lock mmap_sem in __buf_prepare() anymore.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Provide simple helper functions to map virtual address range into an
array of pfns / pages.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Provide new function get_vaddr_frames(). This function maps virtual
addresses from given start and fills given array with page frame numbers of
the corresponding pages. If given start belongs to a normal vma, the function
grabs reference to each of the pages to pin them in memory. If start
belongs to VM_IO | VM_PFNMAP vma, we don't touch page structures. Caller
must make sure pfns aren't reused for anything else while he is using
them.
This function is created for various drivers to simplify handling of
their buffers.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This adds a debugfs hook to read/write registers in the ST
sensors using debugfs. Proved to be awesome help when trying
to debug why IRQs do not arrive.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
We can remove everything from struct sb_writers except frozen
and add the array of percpu_rw_semaphore's instead.
This patch doesn't remove sb_writers->wait_unfrozen yet, we keep
it for get_super_thawed(). We will probably remove it later.
This change tries to address the following problems:
- Firstly, __sb_start_write() looks simply buggy. It does
__sb_end_write() if it sees ->frozen, but if it migrates
to another CPU before percpu_counter_dec(), sb_wait_write()
can wrongly succeed if there is another task which holds
the same "semaphore": sb_wait_write() can miss the result
of the previous percpu_counter_inc() but see the result
of this percpu_counter_dec().
- As Dave Hansen reports, it is suboptimal. The trivial
microbenchmark that writes to a tmpfs file in a loop runs
12% faster if we change this code to rely on RCU and kill
the memory barriers.
- This code doesn't look simple. It would be better to rely
on the generic locking code.
According to Dave, this change adds the same performance
improvement.
Note: with this change both freeze_super() and thaw_super() will do
synchronize_sched_expedited() 3 times. This is just ugly. But:
- This will be "fixed" by the rcu_sync changes we are going
to merge. After that freeze_super()->percpu_down_write()
will use synchronize_sched(), and thaw_super() won't use
synchronize() at all.
This doesn't need any changes in fs/super.c.
- Once we merge rcu_sync changes, we can also change super.c
so that all wb_write->rw_sem's will share the single ->rss
in struct sb_writes, then freeze_super() will need only one
synchronize_sched().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
|
|
Of course, this patch is ugly as hell. It will be (partially)
reverted later. We add it to ensure that other WIP changes in
percpu_rw_semaphore won't break fs/super.c.
We do not even need this change right now, percpu_free_rwsem()
is fine in atomic context. But we are going to change this, it
will be might_sleep() after we merge the rcu_sync() patches.
And even after that we do not really need destroy_super_work(),
we will kill it in any case. Instead, destroy_super_rcu() should
just check that rss->cb_state == CB_IDLE and do call_rcu() again
in the (very unlikely) case this is not true.
So this is just the temporary kludge which helps us to avoid the
conflicts with the changes which will be (hopefully) routed via
rcu tree.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
|
|
Add percpu_rwsem_release() and percpu_rwsem_acquire() for the users
which need to return to userspace with percpu-rwsem lock held and/or
pass the ownership to another thread.
TODO: change percpu_rwsem_release() to use rwsem_clear_owner(). We can
either fold kernel/locking/rwsem.h into include/linux/rwsem.h, or add
the non-inline percpu_rwsem_clear_owner().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Add percpu_down_read_trylock(), it will have the user soon.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Preparation to hide the sb->s_writers internals from xfs and btrfs.
Add 2 trivial define's they can use rather than play with ->s_writers
directly. No changes in btrfs/transaction.o and xfs/xfs_aops.o.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
single MST fixes from Maarten.
* tag 'topic/drm-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel:
drm/dp/mst: Remove port after removing connector.
|
|
|
|
Move struct at91_usbh_data back in ohci-at91.c as this is the only user
left after switching all at91 platforms to DT only.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With this patch a flag instead of a variable
is used for the default device authorization.
Signed-off-by: Stefan Koch <skoch@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Interfaces are allowed per default.
This can disabled or enabled (again) by writing 0 or 1 to
/sys/bus/usb/devices/usbX/interface_authorized_default
Signed-off-by: Stefan Koch <skoch@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
