| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
pwm: Support for duty_offset
Support a new abstraction for pwm configuration that allows to specify
the time between start of period and the raising edge of the signal
("duty offset").
This is used in a patch series by Trevor Gamblin for triggering an ADC
conversion and afterwards read out the result. See
https://lore.kernel.org/linux-iio/20240909-ad7625_r1-v5-0-60a397768b25@baylibre.com/
for more details.
|
|
The RTC and VBATTB don't share the MSTOP control bit (but only the bus
clock and the reset signal). As the MSTOP control is modeled though power
domains add power domain ID for the RTC device available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241019084738.3370489-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Pull compress-offload API extension for accel operation mode
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a requirement to expose the audio hardware that accelerates various
tasks for user space such as sample rate converters, compressed
stream decoders, etc.
This is description for the API extension for the compress ALSA API which
is able to handle "tasks" that are not bound to real-time operations
and allows for the serialization of operations.
For details, refer to "compress-accel.rst" document.
Cc: Mark Brown <broonie@kernel.org>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: Nicolas Dufresne <nicolas@ndufresne.ca>
Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241002093904.1809799-1-perex@perex.cz
|
|
Add a new if_not_guard() macro to cleanup.h for handling
conditional guards such as mutext_trylock().
This is more ergonomic than scoped_guard() for most use cases.
Instead of hiding the error handling statement in the macro args, it
works like a normal if statement and allow the error path to be indented
while the normal code flow path is not indented. And it avoid unwanted
side-effect from hidden for loop in scoped_guard().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Co-developed-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20241001-cleanup-if_not_cond_guard-v1-1-7753810b0f7a@baylibre.com
|
|
Change scoped_guard() and scoped_cond_guard() macros to make reasoning
about them easier for static analysis tools (smatch, compiler
diagnostics), especially to enable them to tell if the given usage of
scoped_guard() is with a conditional lock class (interruptible-locks,
try-locks) or not (like simple mutex_lock()).
Add compile-time error if scoped_cond_guard() is used for non-conditional
lock class.
Beyond easier tooling and a little shrink reported by bloat-o-meter
this patch enables developer to write code like:
int foo(struct my_drv *adapter)
{
scoped_guard(spinlock, &adapter->some_spinlock)
return adapter->spinlock_protected_var;
}
Current scoped_guard() implementation does not support that,
due to compiler complaining:
error: control reaches end of non-void function [-Werror=return-type]
Technical stuff about the change:
scoped_guard() macro uses common idiom of using "for" statement to declare
a scoped variable. Unfortunately, current logic is too hard for compiler
diagnostics to be sure that there is exactly one loop step; fix that.
To make any loop so trivial that there is no above warning, it must not
depend on any non-const variable to tell if there are more steps. There is
no obvious solution for that in C, but one could use the compound
statement expression with "goto" jumping past the "loop", effectively
leaving only the subscope part of the loop semantics.
More impl details:
one more level of macro indirection is now needed to avoid duplicating
label names;
I didn't spot any other place that is using the
"for (...; goto label) if (0) label: break;" idiom, so it's not packed for
reuse beyond scoped_guard() family, what makes actual macros code cleaner.
There was also a need to introduce const true/false variable per lock
class, it is used to aid compiler diagnostics reasoning about "exactly
1 step" loops (note that converting that to function would undo the whole
benefit).
Big thanks to Andy Shevchenko for help on this patch, both internal and
public, ranging from whitespace/formatting, through commit message
clarifications, general improvements, ending with presenting alternative
approaches - all despite not even liking the idea.
Big thanks to Dmitry Torokhov for the idea of compile-time check for
scoped_cond_guard() (to use it only with conditional locsk), and general
improvements for the patch.
Big thanks to David Lechner for idea to cover also scoped_cond_guard().
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lkml.kernel.org/r/20241018113823.171256-1-przemyslaw.kitszel@intel.com
|
|
Guard functions in local_lock.h are defined using DEFINE_GUARD() and
DEFINE_LOCK_GUARD_1() macros having lock type defined as pointer in
the percpu address space. The functions, defined by these macros
return value in generic address space, causing:
cleanup.h:157:18: error: return from pointer to non-enclosed address space
and
cleanup.h:214:18: error: return from pointer to non-enclosed address space
when strict percpu checks are enabled.
Add explicit casts to remove address space of the returned pointer.
Found by GCC's named address space checks.
Fixes: e4ab322fbaaa ("cleanup: Add conditional guard support")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240819074124.143565-1-ubizjak@gmail.com
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge bpf fixes after downstream PR.
No conflicts.
Adjacent changes in:
include/linux/bpf.h
include/uapi/linux/bpf.h
kernel/bpf/btf.c
kernel/bpf/helpers.c
kernel/bpf/syscall.c
kernel/bpf/verifier.c
kernel/trace/bpf_trace.c
mm/slab_common.c
tools/include/uapi/linux/bpf.h
tools/testing/selftests/bpf/Makefile
Link: https://lore.kernel.org/all/20241024215724.60017-1-daniel@iogearbox.net/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
|
|
As with PSCI v1.1 in commit 512865d83fd9 ("KVM: arm64: Bump guest PSCI
version to 1.1"), expose v1.3 to the guest by default. The SYSTEM_OFF2
call which is exposed by doing so is compatible for userspace because
it's just a new flag in the event that KVM raises, in precisely the same
way that SYSTEM_RESET2 was compatible when v1.1 was enabled by default.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-4-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The v1.3 PSCI spec (https://developer.arm.com/documentation/den0022) adds
the SYSTEM_OFF2 function. Add definitions for it and its hibernation type
parameter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-2-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Now we can use new port related functions for port parsing. Use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/87bjzab5sd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
We already have of_graph_get_next_endpoint(), but it is not
intuitive to use in some case.
(X) node {
(Y) ports {
(P0) port@0 { endpoint { remote-endpoint = ...; };};
(P10) port@1 { endpoint { remote-endpoint = ...; };
(P11) endpoint { remote-endpoint = ...; };};
(P2) port@2 { endpoint { remote-endpoint = ...; };};
};
};
For example, if I want to handle port@1's 2 endpoints (= P10, P11),
I want to use like below
P10 = of_graph_get_next_endpoint(port1, NULL);
P11 = of_graph_get_next_endpoint(port1, P10);
But 1st one will be error, because of_graph_get_next_endpoint()
requested 1st parameter is "node" (X) or "ports" (Y), not but "port".
Below works well, but it will get P0
P0 = of_graph_get_next_endpoint(node, NULL);
P0 = of_graph_get_next_endpoint(ports, NULL);
In other words, we can't handle P10/P11 directly via
of_graph_get_next_endpoint().
There is another non intuitive behavior on of_graph_get_next_endpoint().
In case of if I could get P10 pointer for some way, and if I want to
handle port@1 things by loop, I would like use it like below
/*
* "ep" is now P10, and handle port1 things here,
* but we don't know how many endpoints port1 have.
*
* Because "ep" is non NULL now, we can use port1
* as of_graph_get_next_endpoint(port1, xxx)
*/
do {
/* do something for port1 specific things here */
} while (ep = of_graph_get_next_endpoint(port1, ep))
But it also not worked as I expected.
I expect it will be P10 -> P11 -> NULL,
but it will be P10 -> P11 -> P2, because
of_graph_get_next_endpoint() will fetch "endpoint" beyond the "port".
It is not useful for generic driver.
To handle endpoint more intuitive, create of_graph_get_next_port_endpoint()
of_graph_get_next_port_endpoint(port1, NULL); // P10
of_graph_get_next_port_endpoint(port1, P10); // P11
of_graph_get_next_port_endpoint(port1, P11); // NULL
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87jzdyb5t5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
We have endpoint base functions
- of_graph_get_next_endpoint()
- of_graph_get_endpoint_count()
- for_each_endpoint_of_node()
Here, for_each_endpoint_of_node() loop finds each endpoints
ports {
port@0 {
(1) endpoint {...};
};
port@1 {
(2) endpoint {...};
};
...
};
In above case, it finds endpoint as (1) -> (2) -> ...
Basically, user/driver knows which port is used for what, but not in
all cases. For example on flexible/generic driver case, how many ports
are used is not fixed.
For example Sound Generic Card driver which is very flexible/generic and
used from many venders can't know how many ports are used, and used for
what, because it depends on each vender SoC and/or its used board.
And more, the port can have multi endpoints. For example Generic Sound
Card case, it supports many type of connection between CPU / Codec, and
some of them uses multi endpoint in one port. see below.
ports {
(A) port@0 {
(1) endpoint@0 {...};
(2) endpoint@1 {...};
};
(B) port@1 {
(3) endpoint {...};
};
...
};
Generic Sound Card want to handle each connection via "port" base instead
of "endpoint" base. But, it is very difficult to handle each "port" via
existing for_each_endpoint_of_node(). Because getting each "port" via
of_get_parent() from each "endpoint" doesn't work. For example in above
case, both (1) (2) endpoint has same "port" (= A).
Add "port" base functions.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ldyeb5t9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Get correct cores_per_package for SMT systems, enable IRQ if do_ale()
triggered in irq-enabled context, and fix some bugs about vDSO, memory
managenent, hrtimer in KVM, etc"
* tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
LoongArch: Make KASAN usable for variable cpu_vabits
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
LoongArch: Don't crash in stack_top() for tasks without vDSO
LoongArch: Set correct size for vDSO code mapping
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
LoongArch: Get correct cores_per_package for SMT systems
LoongArch: Use "Exception return address" to comment ERA
|
|
This allows a tracer to control the ABI of the tracee, as on arm64.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V supports pointer masking with a variable number of tag bits
(which is called "PMLEN" in the specification) and which is configured
at the next higher privilege level.
Wire up the PR_SET_TAGGED_ADDR_CTRL and PR_GET_TAGGED_ADDR_CTRL prctls
so userspace can request a lower bound on the number of tag bits and
determine the actual number of tag bits. As with arm64's
PR_TAGGED_ADDR_ENABLE, the pointer masking configuration is
thread-scoped, inherited on clone() and fork() and cleared on execve().
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241016202814.4061541-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Follow the interlace_allowed example and calculate drm_connector's
ycbcr_420_allowed flag as AND of all drm_bridge's ycbcr_420_allowed
flags in a chain. This is one of the gaps between several
bridge-specific connector implementations and drm_bridge_connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-1-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This patch adds uptr support in the map_value of the task local storage.
struct map_value {
struct user_data __uptr *uptr;
};
struct {
__uint(type, BPF_MAP_TYPE_TASK_STORAGE);
__uint(map_flags, BPF_F_NO_PREALLOC);
__type(key, int);
__type(value, struct value_type);
} datamap SEC(".maps");
A new bpf_obj_pin_uptrs() is added to pin the user page and
also stores the kernel address back to the uptr for the
bpf prog to use later. It currently does not support
the uptr pointing to a user struct across two pages.
It also excludes PageHighMem support to keep it simple.
As of now, the 32bit bpf jit is missing other more crucial bpf
features. For example, many important bpf features depend on
bpf kfunc now but so far only one arch (x86-32) supports it
which was added by me as an example when kfunc was first
introduced to bpf.
The uptr can only be stored to the task local storage by the
syscall update_elem. Meaning the uptr will not be considered
if it is provided by the bpf prog through
bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE).
This is enforced by only calling
bpf_local_storage_update(swap_uptrs==true) in
bpf_pid_task_storage_update_elem. Everywhere else will
have swap_uptrs==false.
This will pump down to bpf_selem_alloc(swap_uptrs==true). It is
the only case that bpf_selem_alloc() will take the uptr value when
updating the newly allocated selem. bpf_obj_swap_uptrs() is added
to swap the uptr between the SDATA(selem)->data and the user provided
map_value in "void *value". bpf_obj_swap_uptrs() makes the
SDATA(selem)->data takes the ownership of the uptr and the user space
provided map_value will have NULL in the uptr.
The bpf_obj_unpin_uptrs() is called after map->ops->map_update_elem()
returning error. If the map->ops->map_update_elem has reached
a state that the local storage has taken the uptr ownership,
the bpf_obj_unpin_uptrs() will be a no op because the uptr
is NULL. A "__"bpf_obj_unpin_uptrs is added to make this
error path unpin easier such that it does not have to check
the map->record is NULL or not.
BPF_F_LOCK is not supported when the map_value has uptr.
This can be revisited later if there is a use case. A similar
swap_uptrs idea can be considered.
The final bit is to do unpin_user_page in the bpf_obj_free_fields().
The earlier patch has ensured that the bpf_obj_free_fields() has
gone through the rcu gp when needed.
Cc: linux-mm@kvack.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241023234759.860539-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In a later patch, bpf_selem_free() will call unpin_user_page()
through bpf_obj_free_fields(). unpin_user_page() may take spin_lock.
However, some bpf_selem_free() call paths have held a raw_spin_lock.
Like this:
raw_spin_lock_irqsave()
bpf_selem_unlink_storage_nolock()
bpf_selem_free()
unpin_user_page()
spin_lock()
To avoid spinlock nested in raw_spinlock, bpf_selem_free() should be
done after releasing the raw_spinlock. The "bool reuse_now" arg is
replaced with "struct hlist_head *free_selem_list" in
bpf_selem_unlink_storage_nolock(). The bpf_selem_unlink_storage_nolock()
will append the to-be-free selem at the free_selem_list. The caller of
bpf_selem_unlink_storage_nolock() will need to call the new
bpf_selem_free_list(free_selem_list, reuse_now) to free the selem
after releasing the raw_spinlock.
Note that the selem->snode cannot be reused for linking to
the free_selem_list because the selem->snode is protected by the
raw_spinlock that we want to avoid holding. A new
"struct hlist_node free_node;" is union-ized with
the rcu_head. Only the first one successfully
hlist_del_init_rcu(&selem->snode) will be able
to use the free_node. After succeeding hlist_del_init_rcu(&selem->snode),
the free_node and rcu_head usage is serialized such that they
can share the 16 bytes in a union.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_selem_alloc()
In a later patch, the task local storage will only accept uptr
from the syscall update_elem and will not accept uptr from
the bpf prog. The reason is the bpf prog does not have a way
to provide a valid user space address.
bpf_local_storage_update() and bpf_selem_alloc() are used by
both bpf prog bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE)
and bpf syscall update_elem. "bool swap_uptrs" arg is added
to bpf_local_storage_update() and bpf_selem_alloc() to tell if
it is called by the bpf prog or by the bpf syscall. When
swap_uptrs==true, it is called by the syscall.
The arg is named (swap_)uptrs because the later patch will swap
the uptrs between the newly allocated selem and the user space
provided map_value. It will make error handling easier in case
map->ops->map_update_elem() fails and the caller can decide
if it needs to unpin the uptr in the user space provided
map_value or the bpf_local_storage_update() has already
taken the uptr ownership and will take care of unpinning it also.
Only swap_uptrs==false is passed now. The logic to handle
the true case will be added in a later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch introduces the "__uptr" type tag to BTF. It is to define
a pointer pointing to the user space memory. This patch adds BTF
logic to pass the "__uptr" type tag.
btf_find_kptr() is reused for the "__uptr" tag. The "__uptr" will only
be supported in the map_value of the task storage map. However,
btf_parse_struct_meta() also uses btf_find_kptr() but it is not
interested in "__uptr". This patch adds a "field_mask" argument
to btf_find_kptr() which will return BTF_FIELD_IGNORE if the
caller is not interested in a “__uptr” field.
btf_parse_kptr() is also reused to parse the uptr.
The btf_check_and_fixup_fields() is changed to do extra
checks on the uptr to ensure that its struct size is not larger
than PAGE_SIZE. It is not clear how a uptr pointing to a CO-RE
supported kernel struct will be used, so it is also not allowed now.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
|
|
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
route_doit() calls phonet_route_add() or phonet_route_del()
for RTM_NEWROUTE or RTM_DELROUTE, respectively.
Both functions only touch phonet_pernet(dev_net(dev))->routes,
which is currently protected by RTNL and its dedicated mutex,
phonet_routes.lock.
We will convert route_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, rtm_phonet_notify() fetches netns and ifindex from dev.
Once route_doit() is converted to RCU, rtm_phonet_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to rtm_phonet_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
addr_doit() calls phonet_address_add() or phonet_address_del()
for RTM_NEWADDR or RTM_DELADDR, respectively.
Both functions only touch phonet_device_list(dev_net(dev)),
which is currently protected by RTNL and its dedicated mutex,
phonet_device_list.lock.
We will convert addr_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The thresholds exist but there is no notification neither action code
related to them yet.
These changes implement the netlink for the notifications when the
thresholds are crossed, added, deleted or flushed as well as the
commands which allows to get the list of the thresholds, flush them,
add and delete.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-3-daniel.lezcano@linaro.org
[ rjw: Use the thermal_zone guard for locking, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add and use a special guard for cooling devices.
This allows quite a few error code paths to be simplified among
other things and brings in code size reduction for a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5837621.DvuYhMxLoT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Embed UHS-II access/control functionality into the MMC request
processing flow.
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com>
[Ulf: A couple of cleanups and fixed sd_uhs2_power_off()]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A common pattern when using pid fds is having to get information
about the process, which currently requires /proc being mounted,
resolving the fd to a pid, and then do manual string parsing of
/proc/N/status and friends. This needs to be reimplemented over
and over in all userspace projects (e.g.: I have reimplemented
resolving in systemd, dbus, dbus-daemon, polkit so far), and
requires additional care in checking that the fd is still valid
after having parsed the data, to avoid races.
Having a programmatic API that can be used directly removes all
these requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct
so that more parameters can be added later if needed. Start with
returning pid/tgid/ppid and creds unconditionally, and cgroupid
optionally.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Link: https://lore.kernel.org/r/20241010155401.2268522-1-luca.boccassi@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
* tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
====================
Link: https://patch.msgid.link/20241023143005.2297694-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
spin_trylock_irqsave() has a __cond_lock() wrapper which points to
__spin_trylock_irqsave(). The function then invokes spin_trylock() which
has another __cond_lock() finally pointing to rt_spin_trylock().
The compiler has no problem to parse this but sparse does not recognise
that users of spin_trylock_irqsave() acquire a conditional lock and
complains.
Remove one layer of __cond_lock() so that sparse recognises conditional
locking.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812104200.2239232-3-bigeasy@linutronix.de
|
|
The sleeping locks on PREEMPT_RT (rt_spin_lock() and friends) lack
sparse annotation. Therefore a missing spin_unlock() won't be spotted by
sparse in a PREEMPT_RT build while it is noticed on a !PREEMPT_RT build.
Add the __acquires/__releases macros to the lock/ unlock functions. The
trylock functions already use the __cond_lock() wrapper.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812104200.2239232-2-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-10-22
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Link: https://patch.msgid.link/20241022092226.654370-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
An uncomfortably large set of fixes due to me not getting round to
sending them for longer than I should due to travel and illness. This
is mostly smaller driver specific changes, but there are a couple of
generic changes:
- Bumping the minimal topology ABI we check for during validation, the
code had support for v4 removed previously but the update of the
define used for initial validation was missed.
- Fix the assumption that DAPM structs will be embedded in a component
which isn't true for card widgets when doing name comparisons, though
fortunately this is rarely triggered.
We've pulled in one Soundwire fix which was part of a larger series
fixing cleanup issues in on Intel Soundwire systems.
|
|
The PCIe Bandwidth Controller performs RMW accesses the Link Control 2
Register which can occur concurrently to other sources of Link Control 2
Register writes. Therefore, add Link Control 2 Register among the PCI
Express Capability Registers that need RMW locking.
Link: https://lore.kernel.org/r/20241018144755.7875-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
i.MX91 has similar Clock Control Module(CCM) design as i.MX93, only add
few new clock compared to i.MX93.
Add a new compatible string and some new clocks for i.MX91.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241023184651.381265-4-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
IMX93_CLK_END should be dropped as it is not part of the ABI.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241023184651.381265-3-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Whether a cgroup is frozen is determined solely by whether it is set to
to be frozen and whether its parent is frozen. Currently, when is cgroup
is frozen or unfrozen, it iterates through the entire subtree to freeze
or unfreeze its descentdants. However, this is unesessary for a cgroup
that does not change its effective frozen status. This path aims to skip
the subtree if its parent does not have a change in effective freeze.
For an example, subtree like, a-b-c-d-e-f-g, when a is frozen, the
entire tree is frozen. If we freeze b and c again, it is unesessary to
iterate d, e, f and g. So does that If we unfreeze b/c.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Now that we have laid the groundwork, introduce OA sync properties in the
uapi and parse the input xe_sync array as is done elsewhere in the
driver. Also add DRM_XE_OA_CAPS_SYNCS bit in OA capabilities for userspace.
v2: Fix and document DRM_XE_SYNC_TYPE_USER_FENCE for OA (Matt B)
Add DRM_XE_OA_CAPS_SYNCS bit to OA capabilities (Jose)
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-3-ashutosh.dixit@intel.com
|
|
This change allows the uprobe consumer to behave as session which
means that 'handler' and 'ret_handler' callbacks are connected in
a way that allows to:
- control execution of 'ret_handler' from 'handler' callback
- share data between 'handler' and 'ret_handler' callbacks
The session concept fits to our common use case where we do filtering
on entry uprobe and based on the result we decide to run the return
uprobe (or not).
It's also convenient to share the data between session callbacks.
To achive this we are adding new return value the uprobe consumer
can return from 'handler' callback:
UPROBE_HANDLER_IGNORE
- Ignore 'ret_handler' callback for this consumer.
And store cookie and pass it to 'ret_handler' when consumer has both
'handler' and 'ret_handler' callbacks defined.
We store shared data in the return_consumer object array as part of
the return_instance object. This way the handle_uretprobe_chain can
find related return_consumer and its shared data.
We also store entry handler return value, for cases when there are
multiple consumers on single uprobe and some of them are ignored and
some of them not, in which case the return probe gets installed and
we need to have a way to find out which consumer needs to be ignored.
The tricky part is when consumer is registered 'after' the uprobe
entry handler is hit. In such case this consumer's 'ret_handler' gets
executed as well, but it won't have the proper data pointer set,
so we can filter it out.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-3-jolsa@kernel.org
|
|
Adding data pointer to both entry and exit consumer handlers and all
its users. The functionality itself is coming in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-2-jolsa@kernel.org
|
|
Q6 firmware takes care of bringup clocks, so remove them.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240820055618.267554-5-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Q6 firmware takes care of bringup clocks, so remove them.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Link: https://lore.kernel.org/r/20240820055618.267554-4-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
