| Age | Commit message (Collapse) | Author |
|---|
|
This patch introduces a new counter to memory.stat that tracks hugeTLB
usage, only if hugeTLB accounting is done to memory.current. This feature
is enabled the same way hugeTLB accounting is enabled, via the
memory_hugetlb_accounting mount flag for cgroupsv2.
1. Why is this patch necessary?
Currently, memcg hugeTLB accounting is an opt-in feature [1] that adds
hugeTLB usage to memory.current. However, the metric is not reported in
memory.stat. Given that users often interpret memory.stat as a breakdown
of the value reported in memory.current, the disparity between the two
reports can be confusing. This patch solves this problem by including the
metric in memory.stat as well, but only if it is also reported in
memory.current (it would also be confusing if the value was reported in
memory.stat, but not in memory.current)
Aside from the consistency between the two files, we also see benefits in
observability. Userspace might be interested in the hugeTLB footprint of
cgroups for many reasons. For instance, system admins might want to
verify that hugeTLB usage is distributed as expected across tasks: i.e.
memory-intensive tasks are using more hugeTLB pages than tasks that don't
consume a lot of memory, or are seen to fault frequently. Note that this
is separate from wanting to inspect the distribution for limiting purposes
(in which case, hugeTLB controller makes more sense).
2. We already have a hugeTLB controller. Why not use that?
It is true that hugeTLB tracks the exact value that we want. In fact, by
enabling the hugeTLB controller, we get all of the observability benefits
that I mentioned above, and users can check the total hugeTLB usage,
verify if it is distributed as expected, etc.
With this said, there are 2 problems:
(a) They are still not reported in memory.stat, which means the
disparity between the memcg reports are still there.
(b) We cannot reasonably expect users to enable the hugeTLB controller
just for the sake of hugeTLB usage reporting, especially since
they don't have any use for hugeTLB usage enforcing [2].
3. Implementation Details:
In the alloc / free hugetlb functions, we call lruvec_stat_mod_folio
regardless of whether memcg accounts hugetlb. mem_cgroup_commit_charge
which is called from alloc_hugetlb_folio will set memcg for the folio only
if the CGRP_ROOT_MEMORY_HUGETLB_ACCOUNTING cgroup mount option is used, so
lruvec_stat_mod_folio accounts per-memcg hugetlb counters only if the
feature is enabled. Regardless of whether memcg accounts for hugetlb, the
newly added global counter is updated and shown in /proc/vmstat.
The global counter is added because vmstats is the preferred framework for
cgroup stats. It makes stat items consistent between global and cgroups.
It also provides a per-node breakdown, which is useful. Because it does
not use cgroup-specific hooks, we also keep generic MM code separate from
memcg code.
[1] https://lore.kernel.org/all/20231006184629.155543-1-nphamcs@gmail.com/
[2] Of course, we can't make a new patch for every feature that can be
duplicated. However, since the existing solution of enabling the
hugeTLB controller is an imperfect solution that still leaves a
discrepancy between memory.stat and memory.curent, I think that it
is reasonable to isolate the feature in this case.
Link: https://lkml.kernel.org/r/20241101204402.1885383-1-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the
object_is_on_stack() function may produce incorrect results due to the
presence of tags in the obj pointer, while the stack pointer does not have
tags. This discrepancy can lead to incorrect stack object detection and
subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled.
Example of the warning:
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4
Hardware name: linux,dummy-virt (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __debug_object_init+0x330/0x364
lr : __debug_object_init+0x330/0x364
sp : ffff800082ea7b40
x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534
x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0
x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418
x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000
x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e
x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e
x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800
x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001
x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4
x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050
Call trace:
__debug_object_init+0x330/0x364
debug_object_init_on_stack+0x30/0x3c
schedule_hrtimeout_range_clock+0xac/0x26c
schedule_hrtimeout+0x1c/0x30
wait_task_inactive+0x1d4/0x25c
kthread_bind_mask+0x28/0x98
init_rescuer+0x1e8/0x280
workqueue_init+0x1a0/0x3cc
kernel_init_freeable+0x118/0x200
kernel_init+0x28/0x1f0
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
Link: https://lkml.kernel.org/r/20241113042544.19095-1-qun-wei.lin@mediatek.com
Signed-off-by: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrew Yang <andrew.yang@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ethtool ntuple filters with FLOW_RSS were originally defined as adding
the base queue ID (ring_cookie) to the value from the indirection table,
so that the same table could distribute over more than one set of queues
when used by different filters.
However, some drivers / hardware ignore the ring_cookie, and simply use
the indirection table entries as queue IDs directly. Thus, for drivers
which have not opted in by setting ethtool_ops.cap_rss_rxnfc_adds to
declare that they support the original (addition) semantics, reject in
ethtool_set_rxnfc any filter which combines FLOW_RSS and a nonzero ring.
(For a ring_cookie of zero, both behaviours are equivalent.)
Set the cap bit in sfc, as it is known to support this feature.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/cc3da0844083b0e301a33092a6299e4042b65221.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mdio45_ethtool_gset_npage() function isn't called, so let's remove
it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20241112105430.438491-2-alistair@alistair23.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mdio45_ethtool_gset() is never called, so let's remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20241112105430.438491-1-alistair@alistair23.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an accessor for eee_broken_modes, so that drivers
don't have to deal with phylib internals.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/0f8ee279-d40d-4489-a3b0-d993472d744a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eee_broken_modes has a eee_cap1 register layout currently. This doen't
allow to flag e.g. 2.5Gbps or 5Gbps BaseT EEE as broken. To overcome
this limitation switch eee_broken_modes to a linkmode bitmap.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dfe0c9ff-84b0-4328-86d7-e917ebc084a1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add non-devres version of clk_hw_register_fixed_factor(), with parent
targeted using its index.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-3-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add #defines for Mobileye clock controller:
- EyeQ5 core 0 thru 3 clocks. Internally:
EQ5C_PLL_CPU: already exposed
└── EQ5C_CPU_OCC: unexposed, no reason to do so
├── EQ5C_CPU_CORE0: new!
├── EQ5C_CPU_CORE1: new!
├── EQ5C_CPU_CORE2: new!
└── EQ5C_CPU_CORE3: new!
- EyeQ5 peripheral clocks. Internally:
EQ5C_PLL_PER: already exposed
├── EQ5C_PER_OCC: new!
│ ├── EQ5C_PER_SPI: new!
│ ├── EQ5C_PER_I2C: new!
│ ├── EQ5C_PER_GPIO: new!
│ └── EQ5C_PER_UART: new!
├── EQ5C_PER_EMMC: new!
└── EQ5C_PER_OCC_PCI: new!
- EyeQ6H central OLB. Internally:
EQ6HC_CENTRAL_PLL_CPU: new!
└── EQ6HC_CENTRAL_CPU_OCC: new!
- EyeQ6H west OLB. Internally:
EQ6HC_WEST_PLL_PER: new!
└── EQ6HC_WEST_PER_OCC: new!
└── EQ6HC_WEST_PER_UART: new!
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-2-84cfefb3f485@bootlin.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add dt bindings and documentation for the Marvell PXA1908 clock
controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20241104-pxa1908-lkml-v13-4-e050609b8d6c@skole.hr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
controllers
Add device tree bindings for syscon clock and reset controllers (IMGSYS,
MFGCFG, VDECSYS and VENCSYS).
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241106111402.200940-2-y.oudjana@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as
documented in mgmt-api (BlueZ tree):
Send HCI command and wait for event Command
===========================================
Command Code: 0x005B
Controller Index: <controller id>
Command Parameters: Opcode (2 Octets)
Event (1 Octet)
Timeout (1 Octet)
Parameter Length (2 Octets)
Parameter (variable)
Return Parameters: Response (1-variable Octets)
This command may be used to send a HCI command and wait for an
(optional) event.
The HCI command is specified by the Opcode, any arbitrary is supported
including vendor commands, but contrary to the like of
Raw/User channel it is run as an HCI command send by the kernel
since it uses its command synchronization thus it is possible to wait
for a specific event as a response.
Setting event to 0x00 will cause the command to wait for either
HCI Command Status or HCI Command Complete.
Timeout is specified in seconds, setting it to 0 will cause the
default timeout to be used.
Possible errors: Failed
Invalid Parameters
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Zephyr(1) has been using the same bus defines as Linux so tools likes of
btmon, etc, are able to decode the bus used by the driver to transport
HCI packets.
Link: https://github.com/zephyrproject-rtos/zephyr/pull/80808
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).
In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds quirks for broken extended create connection,
and write auth payload timeout.
Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kvm_vm_create_worker_thread() is meant to be used for kthreads that
can consume significant amounts of CPU time on behalf of a VM or in
response to how the VM behaves (for example how it accesses its memory).
Therefore it wants to charge the CPU time consumed by that work to
the VM's container.
However, because of these threads, cgroups which have kvm instances
inside never complete freezing. This can be trivially reproduced:
root@test ~# mkdir /sys/fs/cgroup/test
root@test ~# echo $$ > /sys/fs/cgroup/test/cgroup.procs
root@test ~# qemu-system-x86_64 -nographic -enable-kvm
and in another terminal:
root@test ~# echo 1 > /sys/fs/cgroup/test/cgroup.freeze
root@test ~# cat /sys/fs/cgroup/test/cgroup.events
populated 1
frozen 0
The cgroup freezing happens in the signal delivery path but
kvm_nx_huge_page_recovery_worker, while joining non-root cgroups, never
calls into the signal delivery path and thus never gets frozen. Because
the cgroup freezer determines whether a given cgroup is frozen by
comparing the number of frozen threads to the total number of threads
in the cgroup, the cgroup never becomes frozen and users waiting for
the state transition may hang indefinitely.
Since the worker kthread is tied to a user process, it's better if
it behaves similarly to user tasks as much as possible, including
being able to send SIGSTOP and SIGCONT. In fact, vhost_task is all
that kvm_vm_create_worker_thread() wanted to be and more: not only it
inherits the userspace process's cgroups, it has other niceties like
being parented properly in the process tree. Use it instead of the
homegrown alternative.
Incidentally, the new code is also better behaved when you flip recovery
back and forth to disabled and back to enabled. If your recovery period
is 1 minute, it will run the next recovery after 1 minute independent
of how many times you flipped the parameter.
(Commit message based on emails from Tejun).
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Luca Boccassi <bluca@debian.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Luca Boccassi <bluca@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Quite calm week. No new regression under investigation.
Current release - regressions:
- eth: revert "igb: Disable threaded IRQ for igb_msix_other"
Current release - new code bugs:
- bluetooth: btintel: direct exception event to bluetooth stack
Previous releases - regressions:
- core: fix data-races around sk->sk_forward_alloc
- netlink: terminate outstanding dump on socket close
- mptcp: error out earlier on disconnect
- vsock: fix accept_queue memory leak
- phylink: ensure PHY momentary link-fails are handled
- eth: mlx5:
- fix null-ptr-deref in add rule err flow
- lock FTE when checking if active
- eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol
Previous releases - always broken:
- sched: fix u32's systematic failure to free IDR entries for hnodes.
- sctp: fix possible UAF in sctp_v6_available()
- eth: bonding: add ns target multicast address to slave device
- eth: mlx5: fix msix vectors to respect platform limit
- eth: icssg-prueth: fix 1 PPS sync"
* tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: sched: u32: Add test case for systematic hnode IDR leaks
selftests: bonding: add ns multicast group testing
bonding: add ns target multicast address to slave device
net: ti: icssg-prueth: Fix 1 PPS sync
stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines
net: Make copy_safe_from_sockptr() match documentation
net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol
ipmr: Fix access to mfc_cache_list without lock held
samples: pktgen: correct dev to DEV
net: phylink: ensure PHY momentary link-fails are handled
mptcp: pm: use _rcu variant under rcu_read_lock
mptcp: hold pm lock when deleting entry
mptcp: update local address flags when setting it
net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.
MAINTAINERS: Re-add cancelled Renesas driver sections
Revert "igb: Disable threaded IRQ for igb_msix_other"
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
virtio/vsock: Improve MSG_ZEROCOPY error handling
vsock: Fix sk_error_queue memory leak
...
|
|
Turns out that we have some const pointers being passed to
to_usb_device_driver() but were not catching this. Change the macro to
properly propagate the const-ness of the pointer so that we will notice
when we try to write to memory that we shouldn't be writing to.
This requires fixing up the usb_driver_applicable() function as well,
because it can handle a const * to struct usb_driver.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111342-lagoon-reapprove-5e49@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Turns out that we have some const pointers being passed to
to_usb_driver() but were not catching this. Change the macro to
properly propagate the const-ness of the pointer so that we will notice
when we try to write to memory that we shouldn't be writing to.
This requires fixing up the usb_match_dynamic_id() function as well,
because it can handle a const * to struct usb_driver.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111339-shaky-goldsmith-b233@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an ioctl that updates all DMA mappings to reflect the current process,
Change the mm and transfer locked memory accounting from old to current mm.
This will be used for live update, allowing an old process to hand the
iommufd device descriptor to a new process. The new process calls the
ioctl.
IOMMU_IOAS_CHANGE_PROCESS only supports DMA mappings created with
IOMMU_IOAS_MAP_FILE, because the kernel metadata for such mappings does
not depend on the userland VA of the pages (which is different in the new
process).
IOMMU_IOAS_CHANGE_PROCESS fails if other types of mappings are present.
This is a revised version of code originally provided by Jason.
Link: https://patch.msgid.link/r/1731527497-16091-4-git-send-email-steven.sistare@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are a number of places where we accidentally pass in a constant
structure to later cast it off to a dynamic one, and then attempt to
grab a lock on it, which is not a good idea. To help resolve this, move
the dynamic id lock out of the dynamic id structure for the driver and
into one single lock for all USB dynamic ids. As this lock should never
have any real contention (it's only every accessed when a device is
added or removed, which is always serialized) there should not be any
difference except for some memory savings.
Note, this just converts the existing use of the dynamic id lock to the
new static lock, there is one place that is accessing the dynamic id
list without grabbing the lock, that will be fixed up in a follow-on
change.
Cc: Johan Hovold <johan@kernel.org>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111322-kindly-finalist-d247@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the ability to retrieve security mount options. Keep them separate
from filesystem specific mount options so it's easy to tell them apart.
Also allow to retrieve them separate from other mount options as most of
the time users won't be interested in security specific mount options.
Link: https://lore.kernel.org/r/20241114-radtour-ofenrohr-ff34b567b40a@brauner
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:
This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.
|
|
Usage of the telem sysfs file allows for partial reads at an offset.
The current callback method returns the buffer starting from offset 0
only.
Include the requested offset in the callback and update the necessary
address calculations with the offset.
Note: offset addition is moved from the caller to the local usage. For
non-callback usage this is unchanged behavior.
Fixes: e92affc74cd8 ("platform/x86/intel/vsec: Add PMT read callbacks")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20241114130358.2467787-2-michael.j.ruhl@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
* for-next/pkey-signal:
: Bring arm64 pkey signal delivery in line with the x86 behaviour
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests
selftests/mm: Enable pkey_sighandler_tests on arm64
selftests/mm: Use generic pkey register manipulation
arm64: signal: Remove unused macro
arm64: signal: Remove unnecessary check when saving POE state
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
# Conflicts:
# arch/arm64/kernel/signal.c
|
|
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.13
1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.
|
|
Move the timeout/expire/flag members from nft_trans_one_elem struct into
a dybamically allocated structure, only needed when timeout update was
requested.
This halves size of nft_trans_one_elem struct and allows to compact up to
124 elements in one transaction container rather than 62.
This halves memory requirements for a large flush or insert transaction,
where ->update remains NULL.
Care has to be taken to release the extra data in all spots, including
abort path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #1
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
|
|
Add helpers to release the individual elements contained in the
trans_elem container structure.
No functional change intended.
Followup patch will add 'nelems' member and will turn 'priv' into
a flexible array.
These helpers can then loop over all elements.
Care needs to be taken to handle a mix of new elements and existing
elements that are being updated (e.g. timeout refresh).
Before this patch, NEWSETELEM transaction with update is released
early so nft_trans_set_elem_destroy() won't get called, so we need
to skip elements marked as update.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The is_mgtime test checks whether the FS_MGTIME flag is set in the
fstype. To get there from the inode though, we have to dereference 3
pointers.
Add a new IOP_MGTIME flag, and have inode_init_always() set that flag
when the fstype flag is set. Then, make is_mgtime test for IOP_MGTIME
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241113-mgtime-v1-1-84e256980e11@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
Fixup some minor formatting and whitespace in the sdw.h header file.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241112125646.590240-2-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are quite a few things used in the sdw.h header that it relies on
the consumer to include. If something is used directly in the header it
should be included by the header. Update the includes to cover the
missing items, or add forward declarations for things that are only used
as pointers. Whilst making the change also alphabetise the list of
includes.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20241112125646.590240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port. The chip id read from hardware is
same as KSZ9477, so software driver needs to create a new chip id and
group allowable functions under its chip data structure to
differentiate the product.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/20241109015705.82685-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31dd ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f9a4623b-b94c-466c-8733-62057c6d9a17@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce APIs to handle the execution of device parts admin commands.
These APIs cover functionalities such as mode setting, object creation
and destruction, and operations like parts get/set and metadata
retrieval.
These APIs will be utilized in upcoming patches within this series.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241113115200.209269-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Extend the admin command by incorporating a result size field.
This allows higher layers to determine the actual result size from the
backend when this information is not included in the result_sg.
The additional information introduced here will be used in subsequent
patches of this series.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241113115200.209269-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Introduce device parts access commands via the admin queue.
These commands and their structure adhere to the Virtio 1.4
specification.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20241113115200.209269-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
|
|
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890f2 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd37 ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
LIFO ordering for batched completions is a bit unexpected and also
defeats some merging optimizations in e.g. the XFS buffered write
code. Now that we can easily add the request to the tail of the list
do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
