| Age | Commit message (Collapse) | Author |
|---|
|
* kvm-arm64/nv-pmu:
: Support for vEL2 PMU controls
:
: Align the vEL2 PMU support with the current state of non-nested KVM,
: including:
:
: - Trap routing, with the annoying complication of EL2 traps that apply
: in Host EL0
:
: - PMU emulation, using the correct configuration bits depending on
: whether a counter falls in the hypervisor or guest range of PMCs
:
: - Perf event swizzling across nested boundaries, as the event filtering
: needs to be remapped to cope with vEL2
KVM: arm64: nv: Reprogram PMU events affected by nested transition
KVM: arm64: nv: Apply EL2 event filtering when in hyp context
KVM: arm64: nv: Honor MDCR_EL2.HLP
KVM: arm64: nv: Honor MDCR_EL2.HPME
KVM: arm64: Add helpers to determine if PMC counts at a given EL
KVM: arm64: nv: Adjust range of accessible PMCs according to HPMN
KVM: arm64: Rename kvm_pmu_valid_counter_mask()
KVM: arm64: nv: Advertise support for FEAT_HPMN0
KVM: arm64: nv: Describe trap behaviour of MDCR_EL2.HPMN
KVM: arm64: nv: Honor MDCR_EL2.{TPM, TPMCR} in Host EL0
KVM: arm64: nv: Reinject traps that take effect in Host EL0
KVM: arm64: nv: Rename BEHAVE_FORWARD_ANY
KVM: arm64: nv: Allow coarse-grained trap combos to use complex traps
KVM: arm64: Describe RES0/RES1 bits of MDCR_EL2
arm64: sysreg: Add new definitions for ID_AA64DFR0_EL1
arm64: sysreg: Migrate MDCR_EL2 definition to table
arm64: sysreg: Describe ID_AA64DFR2_EL1 fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The generic parts of the RPC layer need to know the widths (in
XDR_UNIT increments) of the XDR data types defined for each
protocol.
As a first step, add dictionaries to keep track of the symbolic and
actual maximum XDR width of XDR types.
This makes it straightforward to look up the width of a type by its
name. The built-in dictionaries are pre-loaded with the widths of
the built-in XDR types as defined in RFC 4506.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
There are quite a number of places that use patterns
such as
if (attr)
val = nla_get_u16(attr);
else
val = DEFAULT;
Add nla_get_u16_default() and friends like that to
not have to type this out all the time.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241108114145.acd2aadb03ac.I3df6aac71d38a5baa1c0a03d0c7e82d4395c030e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The QCOM_SCM_SVC_MP service provides QCOM_SCM_MP_CP_SMMU_APERTURE_ID,
which is used to trigger the mapping of register banks into the SMMU
context for per-processes page tables to function (in case this isn't
statically setup by firmware).
This is necessary on e.g. QCS6490 Rb3Gen2, in order to avoid "CP | AHB
bus error"-errors from the GPU.
Introduce a function to allow the msm driver to invoke this call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-1-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the VWC of a namespace does not exist, the BLK_FEAT_WRITE_CACHE
flag should not be set when registering the block device, regardless
of whether the controller supports VWC.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Implements reporting the I/O Command Set Independent Identify Namespace
command.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the information is stubbed. Supporting these commands is a
requirement for supporting rotational media.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Most of the returned information is just stubbed data. The target must
support these in order to report rotational media. Since this driver
doesn't know any better, each namespace is its own endurance group with
the engid value matching the nsid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This log is required for nvme 2.1.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This is required for nvme 2.1 for targets that support multiple command
sets. We support NVM and ZNS, so are required to support this
identification.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch implements the reservation feature, including:
1. reservation register(register, unregister and replace).
2. reservation acquire(acquire, preempt, preempt and abort).
3. reservation release(release and clear).
4. reservation report.
5. set feature and get feature of reservation notify mask.
6. get log page of reservation event.
Not supported:
1. persistent reservation through power loss.
Test cases:
Use nvme-cli and fio to test all implemented sub features:
1. use nvme resv-register to register host a registrant or
unregister or replace a new key.
2. use nvme resv-acquire to set host to the holder, and use fio
to send read and write io in all reservation type. And also
test preempt and "preempt and abort".
3. use nvme resv-report to show all registrants and reservation
status.
4. use nvme resv-release to release all registrants.
5. use nvme get-log to get events generated by the preceding
operations.
In addition, make reservation configurable, one can set ns to
support reservation before enable ns. The default of resv_enable
is false.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The intent here was clearly to use the gfp variable flags instead of
hardcoding GFP_KERNEL. All the callers pass GFP_KERNEL as the gfp
flags so this doesn't affect runtime.
Fixes: b3231d353a51 ("kunit: add a convenience allocation wrapper for SKBs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This is used when radeonsi export small texture's modifier
to user with eglExportDMABUFImageQueryMESA().
mesa changes is available here:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31658
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29d0 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139ab ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
When bpf_spin_lock was introduced originally, there was deliberation on
whether to use an array of lock IDs, but since bpf_spin_lock is limited
to holding a single lock at any given time, we've been using a single ID
to identify the held lock.
In preparation for introducing spin locks that can be taken multiple
times, introduce support for acquiring multiple lock IDs. For this
purpose, reuse the acquired_refs array and store both lock and pointer
references. We tag the entry with REF_TYPE_PTR or REF_TYPE_LOCK to
disambiguate and find the relevant entry. The ptr field is used to track
the map_ptr or btf (for bpf_obj_new allocations) to ensure locks can be
matched with protected fields within the same "allocation", i.e.
bpf_obj_new object or map value.
The struct active_lock is changed to an int as the state is part of the
acquired_refs array, and we only need active_lock as a cheap way of
detecting lock presence.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
|
|
Make bio_is_zone_append globally available, because file systems need
to use to check for a zone append bio in their end_io handlers to deal
with the block layer emulation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241104062647.91160-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This implements [cmp]xchgXX() macros using Zacas and Zabha extensions
and finally uses those newly introduced macros to add support for
qspinlocks: note that this implementation of qspinlocks satisfies the
forward progress guarantee.
It also uses Ziccrse to provide the qspinlock implementation.
Thanks to Guo and Leonardo for their work!
* b4-shazam-merge: (1314 commits)
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
Link: https://lore.kernel.org/r/20241103145153.105097-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In order to produce a generic kernel, a user can select
CONFIG_COMBO_SPINLOCKS which will fallback at runtime to the ticket
spinlock implementation if Zabha or Ziccrse are not present.
Note that we can't use alternatives here because the discovery of
extensions is done too late and we need to start with the qspinlock
implementation because the ticket spinlock implementation would pollute
the spinlock value, so let's use static keys.
This is largely based on Guo's work and Leonardo reviews at [1].
Link: https://lore.kernel.org/linux-riscv/20231225125847.2778638-1-guoren@kernel.org/ [1]
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20241103145153.105097-14-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add a separate ticket-lock.h to include multiple spinlock versions and
select one at compile time or runtime.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/CAK8P3a2rnz9mQqhN6-e0CGUUv9rntRELFdxt_weiD7FxH7fkfQ@mail.gmail.com/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20241103145153.105097-11-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The arch_spinlock_t of qspinlock has contained the atomic_t val, which
satisfies the ticket-lock requirement. Thus, unify the arch_spinlock_t
into qspinlock_types.h. This is the preparation for the next combo
spinlock.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-riscv/CAK8P3a2rnz9mQqhN6-e0CGUUv9rntRELFdxt_weiD7FxH7fkfQ@mail.gmail.com/
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20241103145153.105097-10-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.13
This pull request contains the interconnect changes for the 6.13-rc1 merge
window. It contains new drivers and clean-ups with the following highlights:
Core changes:
- Remove a useless kfree_const() usage
- Switch back to struct platform_driver::remove()
- Use of_property_present() for non-boolean properties
Driver changes:
- New driver for QCS615 platforms
- New driver for SAR2130P platforms
- New driver for QCS8300 platforms
- Probe defer incase of missing QoS clock dependency in rpmh driver
- Rename qos_clks_required flag to qos_requires_clocks in rpmh driver
- Constify pointers to qcom_icc_node in msm8937 driver
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Use of_property_present() for non-boolean properties
dt-bindings: interconnect: qcom-bwmon: Document QCS8300 bwmon compatibles
interconnect: qcom: add QCS8300 interconnect provider driver
interconnect: Switch back to struct platform_driver::remove()
interconnect: qcom: add support for SAR2130P
dt-bindings: interconnect: qcom: document SAR2130P NoC
interconnect: qcom: add QCS615 interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in QCS615 SoC
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in QCS8300 SoC
interconnect: Remove a useless kfree_const() usage
interconnect: qcom: msm8937: constify pointer to qcom_icc_node
interconnect: qcom: icc-rpmh: rename qos_clks_required flag
interconnect: qcom: icc-rpmh: probe defer incase of missing QoS clock dependency
|
|
|
|
Add a new unprivileged ioctl that will let the command
'btrfs subvolume sync' work without the (privileged) SEARCH_TREE ioctl.
There are several modes of operation, where the most common ones are to
wait on a specific subvolume or all currently queued for cleaning. This
is utilized e.g. in backup applications that delete subvolumes and wait
until they're cleaned to check for remaining space.
The other modes are for flexibility, e.g. for monitoring or
checkpoints in the queue of deleted subvolumes, again without the need
to use SEARCH_TREE.
Notes:
- waiting is interruptible, the timeout is set to 1 second and is not
configurable
- repeated calls to the ioctl see a different state, so this is
inherently racy when using e.g. the count or peek next/last
Use cases:
- a subvolume A was deleted, wait for cleaning (WAIT_FOR_ONE)
- a bunch of subvolumes were deleted, wait for all (WAIT_FOR_QUEUED or
PEEK_LAST + WAIT_FOR_ONE)
- count how many are queued (not blocking), for monitoring purposes
- report progress (PEEK_NEXT), may miss some if cleaning is quick
- own waiting in user space (PEEK_LAST until it's 0)
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the taks that submitted a request is dying, a task work for that
request might get run by a kernel thread or even worse by a half
dismantled task. We can't just cancel the task work without running the
callback as the cmd might need to do some clean up, so pass a flag
instead. If set, it's not safe to access any task resources and the
callback is expected to cancel the cmd ASAP.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The names for the members of struct btrfs_fs_info related to the extent
map shrinker are a bit too long, so rename them to be shorter by replacing
the "extent_map_" prefix with the "em_" prefix.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that the extent map shrinker can only be run by a single task (as a
work queue item) there is no need to keep the progress of the shrinker
protected by a spinlock and passing the progress to trace events as
parameters. So remove the lock and simplify the arguments for the trace
events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_try_tree_write_lock() has been unused since commit
50b21d7a066f ("btrfs: submit a writeback bio per extent_buffer").
Remove it as we don't need it anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we track qgroup extent records in a xarray we don't need to have
a "bytenr" field in struct btrfs_qgroup_extent_record, since we can get
it from the index of the record in the xarray.
So remove the field and grab the bytenr from either the index key or any
other place where it's available (delayed refs). This reduces the size of
struct btrfs_qgroup_extent_record from 40 bytes down to 32 bytes, meaning
that we now can store 128 instances of this structure instead of 102 per
4K page.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce FORCE_CON flag to printk. The new flag will make it possible to
create a context where printk messages will never be suppressed.
This mechanism will be used in the next patch to create a force_con
context on sysrq handling, removing an existing workaround on the
loglevel global variable. The workaround existed to make sure that sysrq
header messages were sent to all consoles, but this doesn't work with
deferred messages because the loglevel might be restored to its original
value before a console flushes the messages.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241105-printk-loud-con-v2-1-bd3ecdf7b0e4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
|
|
On x86_64, with allmodconfig, struct uprobe_task is 72 bytes long, with a
hole and some padding.
/* size: 72, cachelines: 2, members: 7 */
/* sum members: 64, holes: 1, sum holes: 4 */
/* padding: 4 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 4 */
/* last cacheline: 8 bytes */
Reorder the structure to fill the hole and avoid the padding.
This way, the whole structure fits in a single cacheline and some memory is
saved when it is allocated.
/* size: 64, cachelines: 1, members: 7 */
/* forced alignments: 1 */
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/a9f541d0cedf421f765c77a1fb93d6a979778a88.1730495562.git.christophe.jaillet@wanadoo.fr
|
|
When PREEMPT_RT=y, spin locks are mapped to rt_mutex types, so using
spinlock_check() + __raw_spin_lock_init() to initialize spin locks is
incorrect, and would cause build errors.
Introduce __spin_lock_init() to initialize a spin lock with lockdep
rquired information for PREEMPT_RT builds, and use it in the Rust
helper.
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Closes: https://lore.kernel.org/oe-kbuild-all/202409251238.vetlgXE9-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241107163223.2092690-2-ezulian@redhat.com
|
|
Add a light version of override/revert_creds(), this should only be
used when the credentials in question will outlive the critical
section and the critical section doesn't change the ->usage of the
credentials.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
- Pass iocb to ctx->end_write() instead of file + pos
- Get rid of ctx->user_file, which is redundant most of the time
- Instead pass iocb to backing_file_splice_read and
backing_file_splice_write
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
This tracepoint gives visibility on how often the flushing of memcg stats
occurs and contains info on whether it was forced, skipped, and the value
of stats updated. It can help with understanding how readers are affected
by having to perform the flush, and the effectiveness of the flush by
inspecting the number of stats updated. Paired with the recently added
tracepoints for tracing rstat updates, it can also help show correlation
where stats exceed thresholds frequently.
Link: https://lkml.kernel.org/r/20241029021106.25587-3-inwardvessel@gmail.com
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last user of put_pages_list() converted away from it in 6.10 commit
06c375053cef ("iommu/vt-d: add wrapper functions for page allocations"):
delete put_pages_list().
Link: https://lkml.kernel.org/r/d9985d6a-293e-176b-e63d-82fdfd28c139@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement a new lightweight guard page feature, that is regions of
userland virtual memory that, when accessed, cause a fatal signal to
arise.
Currently users must establish PROT_NONE ranges to achieve this.
However this is very costly memory-wise - we need a VMA for each and every
one of these regions AND they become unmergeable with surrounding VMAs.
In addition repeated mmap() calls require repeated kernel context switches
and contention of the mmap lock to install these ranges, potentially also
having to unmap memory if installed over existing ranges.
The lightweight guard approach eliminates the VMA cost altogether - rather
than establishing a PROT_NONE VMA, it operates at the level of page table
entries - establishing PTE markers such that accesses to them cause a
fault followed by a SIGSGEV signal being raised.
This is achieved through the PTE marker mechanism, which we have already
extended to provide PTE_MARKER_GUARD, which we installed via the generic
page walking logic which we have extended for this purpose.
These guard ranges are established with MADV_GUARD_INSTALL. If the range
in which they are installed contain any existing mappings, they will be
zapped, i.e. free the range and unmap memory (thus mimicking the
behaviour of MADV_DONTNEED in this respect).
Any existing guard entries will be left untouched. There is therefore no
nesting of guarded pages.
Guarded ranges are NOT cleared by MADV_DONTNEED nor MADV_FREE (in both
instances the memory range may be reused at which point a user would
expect guards to still be in place), but they are cleared via
MADV_GUARD_REMOVE, process teardown or unmapping of memory ranges.
The guard property can be removed from ranges via MADV_GUARD_REMOVE. The
ranges over which this is applied, should they contain non-guard entries,
will be untouched, with only guard entries being cleared.
We permit this operation on anonymous memory only, and only VMAs which are
non-special, non-huge and not mlock()'d (if we permitted this we'd have to
drop locked pages which would be rather counterintuitive).
Racing page faults can cause repeated attempts to install guard pages that
are interrupted, result in a zap, and this process can end up being
repeated. If this happens more than would be expected in normal
operation, we rescind locks and retry the whole thing, which avoids lock
contention in this scenario.
Link: https://lkml.kernel.org/r/6aafb5821bf209f277dfae0787abb2ef87a37542.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new PTE marker that results in any access causing the accessing
process to segfault.
This is preferable to PTE_MARKER_POISONED, which results in the same
handling as hardware poisoned memory, and is thus undesirable for cases
where we simply wish to 'soft' poison a range.
This is in preparation for implementing the ability to specify guard pages
at the page table level, i.e. ranges that, when accessed, should cause
process termination.
Additionally, rename zap_drop_file_uffd_wp() to zap_drop_markers() - the
function checks the ZAP_FLAG_DROP_MARKER flag so naming it for this single
purpose was simply incorrect.
We then reuse the same logic to determine whether a zap should clear a
guard entry - this should only be performed on teardown and never on
MADV_DONTNEED or MADV_FREE.
We additionally add a WARN_ON_ONCE() in hugetlb logic should a guard
marker be encountered there, as we explicitly do not support this
operation and this should not occur.
Link: https://lkml.kernel.org/r/f47f3d5acca2dcf9bbf655b6d33f3dc713e4a4a0.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabkba@suse.cz>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "implement lightweight guard pages", v4.
Userland library functions such as allocators and threading
implementations often require regions of memory to act as 'guard pages' -
mappings which, when accessed, result in a fatal signal being sent to the
accessing process.
The current means by which these are implemented is via a PROT_NONE mmap()
mapping, which provides the required semantics however incur an overhead
of a VMA for each such region.
With a great many processes and threads, this can rapidly add up and incur
a significant memory penalty. It also has the added problem of preventing
merges that might otherwise be permitted.
This series takes a different approach - an idea suggested by Vlastimil
Babka (and before him David Hildenbrand and Jann Horn - perhaps more - the
provenance becomes a little tricky to ascertain after this - please
forgive any omissions!) - rather than locating the guard pages at the VMA
layer, instead placing them in page tables mapping the required ranges.
Early testing of the prototype version of this code suggests a 5 times
speed up in memory mapping invocations (in conjunction with use of
process_madvise()) and a 13% reduction in VMAs on an entirely idle android
system and unoptimised code.
We expect with optimisation and a loaded system with a larger number of
guard pages this could significantly increase, but in any case these
numbers are encouraging.
This way, rather than having separate VMAs specifying which parts of a
range are guard pages, instead we have a VMA spanning the entire range of
memory a user is permitted to access and including ranges which are to be
'guarded'.
After mapping this, a user can specify which parts of the range should
result in a fatal signal when accessed.
By restricting the ability to specify guard pages to memory mapped by
existing VMAs, we can rely on the mappings being torn down when the
mappings are ultimately unmapped and everything works simply as if the
memory were not faulted in, from the point of view of the containing VMAs.
This mechanism in effect poisons memory ranges similar to hardware memory
poisoning, only it is an entirely software-controlled form of poisoning.
The mechanism is implemented via madvise() behaviour - MADV_GUARD_INSTALL
which installs page table-level guard page markers - and MADV_GUARD_REMOVE
- which clears them.
Guard markers can be installed across multiple VMAs and any existing
mappings will be cleared, that is zapped, before installing the guard page
markers in the page tables.
There is no concept of 'nested' guard markers, multiple attempts to
install guard markers in a range will, after the first attempt, have no
effect.
Importantly, removing guard markers over a range that contains both guard
markers and ordinary backed memory has no effect on anything but the guard
markers (including leaving huge pages un-split), so a user can safely
remove guard markers over a range of memory leaving the rest intact.
The actual mechanism by which the page table entries are specified makes
use of existing logic - PTE markers, which are used for the userfaultfd
UFFDIO_POISON mechanism.
Unfortunately PTE_MARKER_POISONED is not suited for the guard page
mechanism as it results in VM_FAULT_HWPOISON semantics in the fault
handler, so we add our own specific PTE_MARKER_GUARD and adapt existing
logic to handle it.
We also extend the generic page walk mechanism to allow for installation
of PTEs (carefully restricted to memory management logic only to prevent
unwanted abuse).
We ensure that zapping performed by MADV_DONTNEED and MADV_FREE do not
remove guard markers, nor does forking (except when VM_WIPEONFORK is
specified for a VMA which implies a total removal of memory
characteristics).
It's important to note that the guard page implementation is emphatically
NOT a security feature, so a user can remove the markers if they wish. We
simply implement it in such a way as to provide the least surprising
behaviour.
An extensive set of self-tests are provided which ensure behaviour is as
expected and additionally self-documents expected behaviour of guard
ranges.
This patch (of 5):
The existing generic pagewalk logic permits the walking of page tables,
invoking callbacks at individual page table levels via user-provided
mm_walk_ops callbacks.
This is useful for traversing existing page table entries, but precludes
the ability to establish new ones.
Existing mechanism for performing a walk which also installs page table
entries if necessary are heavily duplicated throughout the kernel, each
with semantic differences from one another and largely unavailable for use
elsewhere.
Rather than add yet another implementation, we extend the generic pagewalk
logic to enable the installation of page table entries by adding a new
install_pte() callback in mm_walk_ops. If this is specified, then upon
encountering a missing page table entry, we allocate and install a new one
and continue the traversal.
If a THP huge page is encountered at either the PMD or PUD level we split
it only if there are ops->pte_entry() (or ops->pmd_entry at PUD level),
otherwise if there is only an ops->install_pte(), we avoid the unnecessary
split.
We do not support hugetlb at this stage.
If this function returns an error, or an allocation fails during the
operation, we abort the operation altogether. It is up to the caller to
deal appropriately with partially populated page table ranges.
If install_pte() is defined, the semantics of pte_entry() change - this
callback is then only invoked if the entry already exists. This is a
useful property, as it allows a caller to handle existing PTEs while
installing new ones where necessary in the specified range.
If install_pte() is not defined, then there is no functional difference to
this patch, so all existing logic will work precisely as it did before.
As we only permit the installation of PTEs where a mapping does not
already exist there is no need for TLB management, however we do invoke
update_mmu_cache() for architectures which require manual maintenance of
mappings for other CPUs.
We explicitly do not allow the existing page walk API to expose this
feature as it is dangerous and intended for internal mm use only.
Therefore we provide a new walk_page_range_mm() function exposed only to
mm/internal.h.
We take the opportunity to additionally clean up the page walker logic to
be a little easier to follow.
Link: https://lkml.kernel.org/r/cover.1730123433.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/51b432ebef013e3fdf9f92101533435de1bffadf.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vlastimil Babka <vbabkba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This helps profile the sizes of folios being swapped in. Currently,
only mTHP swap-out is being counted.
The new interface can be found at:
/sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats
swpin
For example,
cat /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpin
12809
cat /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpin
4763
[v-songbaohua@oppo.com: add a blank line in doc]
Link: https://lkml.kernel.org/r/20241030233423.80759-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20241026082423.26298-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Added a new MTHP_STAT_ZSWPOUT entry to the sysfs transparent_hugepage
stats so that successful large folio zswap stores can be accounted under
the per-order sysfs "zswpout" stats:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout
Other non-zswap swap device swap-out events will be counted under
the existing sysfs "swpout" stats:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/swpout
Also, added documentation for the newly added sysfs per-order hugepage
"zswpout" stats. The documentation clarifies that only non-zswap swapouts
will be accounted in the existing "swpout" stats.
Link: https://lkml.kernel.org/r/20241001053222.6944-8-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For zswap_store() to support large folios, we need to be able to do a
batch update of zswap_stored_pages upon successful store of all pages in
the folio. For this, we need to add folio_nr_pages(), which returns a
long, to zswap_stored_pages.
Link: https://lkml.kernel.org/r/20241001053222.6944-6-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: zswap swap-out of large folios", v10.
This patch series enables zswap_store() to accept and store large folios.
The most significant contribution in this series is from the earlier RFC
submitted by Ryan Roberts [1]. Ryan's original RFC has been migrated to
mm-unstable as of 9-30-2024 in patch 6 of this series, and adapted based
on code review comments received for the current patch-series.
[1]: [RFC PATCH v1] mm: zswap: Store large folios without splitting
https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u
The first few patches do the prep work for supporting large folios in
zswap_store. Patch 6 provides the main functionality to swap-out large
folios in zswap. Patch 7 adds sysfs per-order hugepages "zswpout"
counters that get incremented upon successful zswap_store of large folios,
and also updates the documentation for this:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout
This patch series is a prerequisite for zswap compress batching of large
folio swap-out and decompress batching of swap-ins based on
swapin_readahead(), using Intel IAA hardware acceleration, which we would
like to submit in subsequent patch-series, with performance improvement
data.
Thanks to Ying Huang for pre-posting review feedback and suggestions!
Thanks also to Nhat, Yosry, Johannes, Barry, Chengming, Usama, Ying and
Matthew for their helpful feedback, code/data reviews and suggestions!
Co-development signoff request:
===============================
I would like to thank Ryan Roberts for his original RFC [1] and request
his co-developer signoff on patch 6 in this series. Thanks Ryan!
System setup for testing:
=========================
Testing of this patch series was done with mm-unstable as of 9-27-2024,
commit de2fbaa6d9c3576ec7133ed02a370ec9376bf000 (without this patch-series)
and mm-unstable 9-30-2024 commit c121617e3606be6575cdacfdb63cc8d67b46a568
(with this patch-series). Data was gathered on an Intel Sapphire Rapids
server, dual-socket 56 cores per socket, 4 IAA devices per socket, 503 GiB
RAM and 525G SSD disk partition swap. Core frequency was fixed at 2500MHz.
The vm-scalability "usemem" test was run in a cgroup whose memory.high
was fixed at 150G. The is no swap limit set for the cgroup. 30 usemem
processes were run, each allocating and writing 10G of memory, and sleeping
for 10 sec before exiting:
usemem --init-time -w -O -s 10 -n 30 10g
Other kernel configuration parameters:
zswap compressors : zstd, deflate-iaa
zswap allocator : zsmalloc
vm.page-cluster : 2
In the experiments where "deflate-iaa" is used as the zswap compressor,
IAA "compression verification" is enabled by default
(cat /sys/bus/dsa/drivers/crypto/verify_compress). Hence each IAA
compression will be decompressed internally by the "iaa_crypto" driver, the
crc-s returned by the hardware will be compared and errors reported in case
of mismatches. Thus "deflate-iaa" helps ensure better data integrity as
compared to the software compressors, and the experimental data listed
below is with verify_compress set to "1".
Metrics reporting methodology:
==============================
Total and average throughput are derived from the individual 30 processes'
throughputs reported by usemem. elapsed/sys times are measured with perf.
All percentage changes are "new" vs. "old"; hence a positive value
denotes an increase in the metric, whether it is throughput or latency,
and a negative value denotes a reduction in the metric. Positive throughput
change percentages and negative latency change percentages denote improvements.
The vm stats and sysfs hugepages stats included with the performance data
provide details on the swapout activity to zswap/swap device.
Testing labels used in data summaries:
======================================
The data refers to these test configurations and the before/after
comparisons that they do:
before-case1:
-------------
mm-unstable 9-27-2024, CONFIG_THP_SWAP=N (compares zswap 4K vs. zswap 64K)
In this scenario, CONFIG_THP_SWAP=N results in 64K/2M folios to be split
into 4K folios that get processed by zswap.
before-case2:
-------------
mm-unstable 9-27-2024, CONFIG_THP_SWAP=Y (compares SSD swap large folios vs. zswap large folios)
In this scenario, CONFIG_THP_SWAP=Y results in zswap rejecting large
folios, which will then be stored by the SSD swap device.
after:
------
v10 of this patch-series, CONFIG_THP_SWAP=Y
The "after" is CONFIG_THP_SWAP=Y and v10 of this patch-series, that results
in 64K/2M folios to not be split, and to be processed by zswap_store.
Regression Testing:
===================
I ran vm-scalability usemem without large folios, i.e., only 4K folios with
mm-unstable and this patch-series. The main goal was to make sure that
there is no functional or performance regression wrt the earlier zswap
behavior for 4K folios, now that 4K folios will be processed by the new
zswap_store() code.
The data indicates there is no significant regression.
-------------------------------------------------------------------------------
4K folios:
==========
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 4,793,363 4,880,978 4,853,074 1% -1%
Average throughput (KB/s) 159,778 162,699 161,769 1% -1%
elapsed time (sec) 130.14 123.17 126.29 -3% 3%
sys time (sec) 3,135.53 2,985.64 3,083.18 -2% 3%
memcg_high 446,826 444,626 452,930
memcg_swap_fail 0 0 0
zswpout 48,932,107 48,931,971 48,931,820
zswpin 383 386 397
pswpout 0 0 0
pswpin 0 0 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 0 0 0
pgmajfault 3,063 3,077 3,479
swap_ra 93 94 96
swap_ra_hit 47 47 50
ZSWPOUT-64kB n/a n/a 0
SWPOUT-64kB 0 0 0
-------------------------------------------------------------------------------
Performance Testing:
====================
We list the data for 64K folios with before/after data per-compressor,
followed by the same for 2M pmd-mappable folios.
-------------------------------------------------------------------------------
64K folios: zstd:
=================
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,222,213 1,076,611 6,159,776 18% 472%
Average throughput (KB/s) 174,073 35,887 205,325 18% 472%
elapsed time (sec) 120.50 347.16 108.33 -10% -69%
sys time (sec) 2,930.33 248.16 2,549.65 -13% 927%
memcg_high 416,773 552,200 465,874
memcg_swap_fail 3,192,906 1,293 1,012
zswpout 48,931,583 20,903 48,931,218
zswpin 384 363 410
pswpout 0 40,778,448 0
pswpin 0 16 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 3,192,906 1,293 1,012
pgmajfault 3,452 3,072 3,061
swap_ra 90 87 107
swap_ra_hit 42 43 57
ZSWPOUT-64kB n/a n/a 3,057,173
SWPOUT-64kB 0 2,548,653 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
64K folios: deflate-iaa:
========================
zswap compressor deflate-iaa deflate-iaa deflate-iaa deflate-iaa v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,652,608 1,089,180 7,189,778 27% 560%
Average throughput (KB/s) 188,420 36,306 239,659 27% 560%
elapsed time (sec) 102.90 343.35 87.05 -15% -75%
sys time (sec) 2,246.86 213.53 1,864.16 -17% 773%
memcg_high 576,104 502,907 642,083
memcg_swap_fail 4,016,117 1,407 1,478
zswpout 61,163,423 22,444 57,798,716
zswpin 401 368 454
pswpout 0 40,862,080 0
pswpin 0 20 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 4,016,117 1,407 1,478
pgmajfault 3,063 3,153 3,122
swap_ra 96 93 156
swap_ra_hit 46 45 83
ZSWPOUT-64kB n/a n/a 3,611,032
SWPOUT-64kB 0 2,553,880 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
2M folios: zstd:
================
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,895,500 1,109,694 6,484,224 10% 484%
Average throughput (KB/s) 196,516 36,989 216,140 10% 484%
elapsed time (sec) 108.77 334.28 106.33 -2% -68%
sys time (sec) 2,657.14 94.88 2,376.13 -11% 2404%
memcg_high 64,200 66,316 56,898
memcg_swap_fail 101,182 70 27
zswpout 48,931,499 36,507 48,890,640
zswpin 380 379 377
pswpout 0 40,166,400 0
pswpin 0 0 0
thp_swpout 0 78,450 0
thp_swpout_fallback 101,182 70 27
2MB-mthp_swpout_fallback 0 0 27
pgmajfault 3,067 3,417 3,311
swap_ra 91 90 854
swap_ra_hit 45 45 810
ZSWPOUT-2MB n/a n/a 95,459
SWPOUT-2MB 0 78,450 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
2M folios: deflate-iaa:
=======================
zswap compressor deflate-iaa deflate-iaa deflate-iaa deflate-iaa v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 6,286,587 1,126,785 7,073,464 13% 528%
Average throughput (KB/s) 209,552 37,559 235,782 13% 528%
elapsed time (sec) 96.19 333.03 85.79 -11% -74%
sys time (sec) 2,141.44 99.96 1,826.67 -15% 1727%
memcg_high 99,253 64,666 79,718
memcg_swap_fail 129,074 53 165
zswpout 61,312,794 28,321 56,045,120
zswpin 383 406 403
pswpout 0 40,048,128 0
pswpin 0 0 0
thp_swpout 0 78,219 0
thp_swpout_fallback 129,074 53 165
2MB-mthp_swpout_fallback 0 0 165
pgmajfault 3,430 3,077 31,468
swap_ra 91 103 84,373
swap_ra_hit 47 46 84,317
ZSWPOUT-2MB n/a n/a 109,229
SWPOUT-2MB 0 78,219 0
-------------------------------------------------------------------------------
And finally, this is a comparison of deflate-iaa vs. zstd with v10 of this
patch-series:
---------------------------------------------
zswap_store large folios v10
Impr w/ deflate-iaa vs. zstd
64K folios 2M folios
---------------------------------------------
Throughput (KB/s) 17% 9%
elapsed time (sec) -20% -19%
sys time (sec) -27% -23%
---------------------------------------------
Conclusions based on the performance results:
=============================================
v10 wrt before-case1:
---------------------
We see significant improvements in throughput, elapsed and sys time for
zstd and deflate-iaa, when comparing before-case1 (THP_SWAP=N) vs. after
(THP_SWAP=Y) with zswap_store large folios.
v10 wrt before-case2:
---------------------
We see even more significant improvements in throughput and elapsed time
for zstd and deflate-iaa, when comparing before-case2 (large-folio-SSD)
vs. after (large-folio-zswap). The sys time increases with
large-folio-zswap as expected, due to the CPU compression time
vs. asynchronous disk write times, as pointed out by Ying and Yosry.
In before-case2, when zswap does not store large folios, only allocations
and cgroup charging due to 4K folio zswap stores count towards the cgroup
memory limit. However, in the after scenario, with the introduction of
zswap_store() of large folios, there is an added component of the zswap
compressed pool usage from large folio stores from potentially all 30
processes, that gets counted towards the memory limit. As a result, we see
higher swapout activity in the "after" data.
Summary:
========
The v10 data presented above shows that zswap_store of large folios
demonstrates good throughput/performance improvements compared to
conventional SSD swap of large folios with a sufficiently large 525G SSD
swap device. Hence, it seems reasonable for zswap_store to support large
folios, so that further performance improvements can be implemented.
In the experimental setup used in this patchset, we have enabled IAA
compress verification to ensure additional hardware data integrity CRC
checks not currently done by the software compressors. We see good
throughput/latency improvements with deflate-iaa vs. zstd with zswap_store
of large folios.
Some of the ideas for further reducing latency that have shown promise in
our experiments, are:
1) IAA compress/decompress batching.
2) Distributing compress jobs across all IAA devices on the socket.
The tests run for this patchset are using only 1 IAA device per core, that
avails of 2 compress engines on the device. In our experiments with IAA
batching, we distribute compress jobs from all cores to the 8 compress
engines available per socket. We further compress the pages in each folio
in parallel in the accelerator. As a result, we improve compress latency
and reclaim throughput.
In decompress batching, we use swapin_readahead to generate a prefetch
batch of 4K folios that we decompress in parallel in IAA.
------------------------------------------------------------------------------
IAA compress/decompress batching
Further improvements wrt v10 zswap_store Sequential
subpage store using "deflate-iaa":
"deflate-iaa" Batching "deflate-iaa-canned" [2] Batching
Additional Impr Additional Impr
64K folios 2M folios 64K folios 2M folios
------------------------------------------------------------------------------
Throughput (KB/s) 19% 43% 26% 55%
elapsed time (sec) -5% -14% -10% -21%
sys time (sec) 4% -7% -4% -18%
------------------------------------------------------------------------------
With zswap IAA compress/decompress batching, we are able to demonstrate
significant performance improvements and memory savings in server
scalability experiments in highly contended system scenarios under
significant memory pressure; as compared to software compressors. We hope
to submit this work in subsequent patch series. The current patch-series is
a prequisite for these future submissions.
[1] https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u
[2] https://patchwork.kernel.org/project/linux-crypto/cover/cover.1710969449.git.andre.glover@linux.intel.com/
This patch (of 6):
This resolves an issue with obj_cgroup_get() not being defined if
CONFIG_MEMCG is not defined.
Before this patch, we would see build errors if obj_cgroup_get() is called
from code that is agnostic of CONFIG_MEMCG.
The zswap_store() changes for large folios in subsequent commits will
require the use of obj_cgroup_get() in zswap code that falls into this
category.
Link: https://lkml.kernel.org/r/20241001053222.6944-1-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241001053222.6944-2-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pick up e7ac4daeed91 ("mm: count zeromap read and set for swapout and
swapin") in order to move
mm: define obj_cgroup_get() if CONFIG_MEMCG is not defined
mm: zswap: modify zswap_compress() to accept a page instead of a folio
mm: zswap: rename zswap_pool_get() to zswap_pool_tryget()
mm: zswap: modify zswap_stored_pages to be atomic_long_t
mm: zswap: support large folios in zswap_store()
mm: swap: count successful large folio zswap stores in hugepage zswpout stats
mm: zswap: zswap_store_page() will initialize entry after adding to xarray.
mm: add per-order mTHP swpin counters
from mm-unstable into mm-stable.
|
