| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "mm: memcg: page counters optimizations", v3.
This patchset contains 3 independent small optimizations of page counters.
This patch (of 3):
Memory protection (min/low) requires a constant tracking of protected
memory usage. propagate_protected_usage() is called on each page counters
update and does a number of operations even in cases when the actual
memory protection functionality is not supported (e.g. hugetlb cgroups or
memcg swap counters).
It's obviously inefficient and leads to a waste of CPU cycles. It can be
addressed by calling propagate_protected_usage() only for the counters
which do support memory guarantees. As of now it's only memcg->memory -
the unified memory memcg counter.
Link: https://lkml.kernel.org/r/20240726203110.1577216-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Given that stack_not_used() is not performance critical function
uninline it.
Link: https://lkml.kernel.org/r/20240730150158.832783-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240724203322.2765486-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As part of the dynamic kernel stack project, we need to know the amount of
data that can be saved by reducing the default kernel stack size [1].
Provide a kernel stack usage histogram to aid in optimizing kernel stack
sizes and minimizing memory waste in large-scale environments. The
histogram divides stack usage into power-of-two buckets and reports the
results in /proc/vmstat. This information is especially valuable in
environments with millions of machines, where even small optimizations can
have a significant impact.
The histogram data is presented in /proc/vmstat with entries like
"kstack_1k", "kstack_2k", and so on, indicating the number of threads that
exited with stack usage falling within each respective bucket.
Example outputs:
Intel:
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
ARM with 64K page_size:
$ grep kstack /proc/vmstat
kstack_1k 1
kstack_2k 340
kstack_4k 25212
kstack_8k 1659
kstack_16k 0
kstack_32k 0
kstack_64k 0
Note: once the dynamic kernel stack is implemented it will depend on the
implementation the usability of this feature: On hardware that supports
faults on kernel stacks, we will have other metrics that show the total
number of pages allocated for stacks. On hardware where faults are not
supported, we will most likely have some optimization where only some
threads are extended, and for those, these metrics will still be very
useful.
[1] https://lwn.net/Articles/974367
Link: https://lkml.kernel.org/r/20240730150158.832783-3-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240724203322.2765486-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If memory tiering mode is on and a folio is not in the top tier memory,
folio's cpupid field is repurposed to store page access time. Instead of
an open coded check, use a function to encapsulate the check.
Link: https://lkml.kernel.org/r/20240724130115.793641-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is no user of mem_cgroup_from_obj(), remove it.
Link: https://lkml.kernel.org/r/20240718091821.44740-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move shmem_huge_global_enabled() into shmem_allowable_huge_orders(), so
that shmem_allowable_huge_orders() can also help to find the allowable
huge orders for tmpfs. Moreover the shmem_huge_global_enabled() can
become static. While we are at it, passing the vma instead of mm for
shmem_huge_global_enabled() makes code cleaner.
No functional changes.
Link: https://lkml.kernel.org/r/8e825146bb29ee1a1c7bd64d2968ff3e19be7815.1721626645.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
shmem_is_huge() is now used to check if the top-level huge page is
enabled, thus rename it to reflect its usage.
Link: https://lkml.kernel.org/r/da53296e0ab6359aa083561d9dc01e4223d60fbe.1721626645.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Besides the obvious (and desired) difference between krealloc() and
kvrealloc(), there is some inconsistency in their function signatures and
behavior:
- krealloc() frees the memory when the requested size is zero, whereas
kvrealloc() simply returns a pointer to the existing allocation.
- krealloc() behaves like kmalloc() if a NULL pointer is passed, whereas
kvrealloc() does not accept a NULL pointer at all and, if passed,
would fault instead.
- krealloc() is self-contained, whereas kvrealloc() relies on the caller
to provide the size of the previous allocation.
Inconsistent behavior throughout allocation APIs is error prone, hence
make kvrealloc() behave like krealloc(), which seems superior in all
mentioned aspects.
Besides that, implementing kvrealloc() by making use of krealloc() and
vrealloc() provides oppertunities to grow (and shrink) allocations more
efficiently. For instance, vrealloc() can be optimized to allocate and
map additional pages to grow the allocation or unmap and free unused pages
to shrink the allocation.
[dakr@kernel.org: document concurrency restrictions]
Link: https://lkml.kernel.org/r/20240725125442.4957-1-dakr@kernel.org
[dakr@kernel.org: disable KASAN when switching to vmalloc]
Link: https://lkml.kernel.org/r/20240730185049.6244-2-dakr@kernel.org
[dakr@kernel.org: properly document __GFP_ZERO behavior]
Link: https://lkml.kernel.org/r/20240730185049.6244-5-dakr@kernel.org
Link: https://lkml.kernel.org/r/20240722163111.4766-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Align kvrealloc() with krealloc()", v2.
Besides the obvious (and desired) difference between krealloc() and
kvrealloc(), there is some inconsistency in their function signatures and
behavior:
- krealloc() frees the memory when the requested size is zero, whereas
kvrealloc() simply returns a pointer to the existing allocation.
- krealloc() behaves like kmalloc() if a NULL pointer is passed, whereas
kvrealloc() does not accept a NULL pointer at all and, if passed, would fault
instead.
- krealloc() is self-contained, whereas kvrealloc() relies on the caller to
provide the size of the previous allocation.
Inconsistent behavior throughout allocation APIs is error prone, hence
make kvrealloc() behave like krealloc(), which seems superior in all
mentioned aspects.
In order to be able to get rid of kvrealloc()'s oldsize parameter,
introduce vrealloc() and make use of it in kvrealloc().
Making use of vrealloc() in kvrealloc() also provides oppertunities to
grow (and shrink) allocations more efficiently. For instance, vrealloc()
can be optimized to allocate and map additional pages to grow the
allocation or unmap and free unused pages to shrink the allocation.
Besides the above, those functions are required by Rust's allocator abstractons
[1] (rework based on this series in [2]). With `Vec` or `KVec` respectively,
potentially growing (and shrinking) data structures are rather common.
[1] https://lore.kernel.org/lkml/20240704170738.3621-1-dakr@redhat.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/dakr/linux.git/log/?h=rust/mm
This patch (of 2):
Implement vrealloc() analogous to krealloc().
Currently, krealloc() requires the caller to pass the size of the previous
memory allocation, which, instead, should be self-contained.
We attempt to fix this in a subsequent patch which, in order to do so,
requires vrealloc().
Besides that, we need realloc() functions for kernel allocators in Rust
too. With `Vec` or `KVec` respectively, potentially growing (and
shrinking) data structures are rather common.
[dakr@kernel.org: fix missing nommu implementation]
Link: https://lkml.kernel.org/r/20240725141227.13954-1-dakr@kernel.org
[dakr@kernel.org: document concurrency restrictions]
Link: https://lkml.kernel.org/r/20240725125442.4957-1-dakr@kernel.org
[dakr@kernel.org: consider spare memory for __GFP_ZERO]
Link: https://lkml.kernel.org/r/20240730185049.6244-3-dakr@kernel.org
[dakr@kernel.org: properly document __GFP_ZERO behavior]
Link: https://lkml.kernel.org/r/20240730185049.6244-4-dakr@kernel.org
Link: https://lkml.kernel.org/r/20240722163111.4766-1-dakr@kernel.org
Link: https://lkml.kernel.org/r/20240722163111.4766-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat currently shows the number of node_reclaim() failures when
vm.zone_reclaim_mode is set appropriately. It would be convenient to have
the number of successes right next to zone_reclaim_failed (similar to
compaction and migration).
While just a trivially addition to the vmstat file. It was helpful during
benchmarking to not have to probe node_reclaim() to observe the
success/failure ratio.
Link: https://lkml.kernel.org/r/20240722171316.7517-1-mcassell411@gmail.com
Signed-off-by: Matthew Cassell <mcassell411@gmail.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
|
|
Various functions are only used within the sunrpc module, and several
are only use in the one file. So clean up:
These are marked static, and any EXPORT is removed.
svc_rcpb_setup()
svc_rqst_alloc()
svc_rqst_free() - also moved before first use
svc_rpcbind_set_version()
svc_drop() - also moved to svc.c
These are now not EXPORTed, but are not static.
svc_authenticate()
svc_sock_update_bufs()
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
nlmsvc_timeout always has the same value as (nlm_timeout * HZ), so use
that in the one place that nlmsvc_timeout is used.
In truth it *might* not always be the same as nlmsvc_timeout is only set
when lockd is started while nlm_timeout can be set at anytime via
sysctl. I think this difference it not helpful so removing it is good.
Also remove the test for nlm_timout being 0. This is not possible -
unless a module parameter is used to set the minimum timeout to 0, and
if that happens then it probably should be honoured.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
__nfs_revalidate_inode may return ETIMEDOUT.
print symbol of ETIMEDOUT in nfs trace:
before:
cat-5191 [005] 119.331127: nfs_revalidate_inode_exit: error=-110 (0x6e)
after:
cat-1738 [004] 44.365509: nfs_revalidate_inode_exit: error=-110 (TIMEDOUT)
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Right now, PCI endpoint subsystem doesn't assign PCI domain number for the
PCI endpoint controllers. But this domain number could be useful to the EPC
drivers to uniquely identify each controller based on the hardware instance
when there are multiple ones present in an SoC (even multiple RC/EP).
So let's make use of the existing pci_bus_find_domain_nr() API to allocate
domain numbers based on either devicetree (linux,pci-domain) property or
dynamic domain number allocation scheme.
It should be noted that the domain number allocated by this API will be
based on both RC and EP controllers in a SoC. If the 'linux,pci-domain' DT
property is present, then the domain number represents the actual hardware
instance of the PCI endpoint controller. If not, then the domain number
will be allocated based on the PCI EP/RC controller probe order.
If the architecture doesn't support CONFIG_PCI_DOMAINS_GENERIC (rare), then
currently a warning is thrown to indicate that the architecture specific
implementation is needed.
Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-5-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:
bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0]
Keys: 2
BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
Key type: Authenticated key from P-256 (0x03)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 6ed96089bd9765be2f2c971b0b95f624
LE Address: D7:2A:DE:1E:73:A2 (Static)
Key type: Unauthenticated key from P-256 (0x02)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0]
Load Long Term Keys (0x0013)
Status: Invalid Parameters (0x0d)
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Correct spelling in nl802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-2-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Correct spelling in mac802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-1-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This patch introduces CONFIG_CPUSETS_V1 and guard cpuset-v1 code under
CONFIG_CPUSETS_V1. The default value of CONFIG_CPUSETS_V1 is N, so that
user who adopted v2 don't have 'pay' for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Useful to preallocate dma fence array and then arm in path of reclaim or
a dma fence.
v2:
- s/arm/init (Christian)
- Drop !array warn (Christian)
v3:
- Fix kernel doc typos (dim)
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-2-matthew.brost@intel.com
|
|
Previous patch made ICMP rate limits per netns, it makes sense
to allow each netns to change the associated sysctl.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Host wide ICMP ratelimiter should be per netns, to provide better isolation.
Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
The gpmc_onenand_init() have been removed since
commit 2514830b8b8c ("ARM: OMAP2+: Remove gpmc-onenand"), and now
it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240826035823.4043171-1-cuigaosheng1@huawei.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Introduce a device-managed variant of register_framebuffer() which
automatically unregisters the framebuffer on device destruction.
This can simplify the error handling and resource management in drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
pKVM relies on hypercalls to expose services such as memory sharing to
protected guests. Tentatively allocate a block of 58 hypercalls (i.e.
fill the remaining space in the first 64 function IDs) for pKVM usage,
as future extensions such as pvIOMMU support, range-based memory sharing
and validation of assigned devices will require additional services.
Suggested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86a5h5yg5y.wl-maz@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Hook up pKVM's MMIO_GUARD hypercall so that ioremap() and friends will
register the target physical address as MMIO with the hypervisor,
allowing guest exits to that page to be emulated by the host with full
syndrome information.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we detect the presence of pKVM's SHARE and UNSHARE hypercalls, then
register a backend implementation of the mem_encrypt API so that things
like DMA buffers can be shared appropriately with the host.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-5-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement a pKVM protected guest driver to probe the presence of pKVM
and determine the memory protection granule using the HYP_MEMINFO
hypercall.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is only one called of alloc_page_buffers and it doesn't require
__GFP_NOFAIL so drop this allocation mode.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/r/20240829130640.1397970-1-mhocko@kernel.org
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver was removed after kernel 6.2 rendering the header file
unused.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZpTbGHb6EX2Oe7ok@monster.localdomain
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
`pm800_irq`, `pm805_irq` and `pm805_irq_chip` are not modified and can
be declared as const to move their data to a read-only section.
In order to keep the const modifier for the regmap_irq_chip structures,
the pointer used to reference them must be converted to const as well.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-8-0c8785b1331d@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ibs-for-mfd-merged
|
|
Currently, the show_inode_state() macro only prints
part of the state of inode->i_state. Let’s improve it
to display more of its state.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Link: https://lore.kernel.org/r/20240828081359.62429-1-sunjunchao2870@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that we use the wait var event mechanism make i_state a u32 and free
up 4 bytes. This means we currently have two 4 byte holes in struct
inode which we can pack.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-6-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Port the __I_NEW mechanism to use the new var event mechanism.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-4-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
so that we can use the first bits to derive unique addresses from
i_state.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-2-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The i_state member is an unsigned long so that it can be used with the
wait bit infrastructure which expects unsigned long. This wastes 4 bytes
which we're unlikely to ever use. Switch to using the var event wait
mechanism using the address of the bit. Thanks to Linus for the address
idea.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-1-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The underscore variants are for uapi whereas the non-underscore variants
are for in-kernel consumers.
Link: https://lore.kernel.org/r/20240822-anwerben-nutzung-1cd6c82a565f@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
