| Age | Commit message (Collapse) | Author |
|---|
|
These function are all called from assembler files, or from inline
assembler, so there is no immediate need for a prototype in a header,
but if -Wmissing-prototypes is enabled, the compiler warns about them:
arch/x86/xen/efi.c:130:13: error: no previous prototype for 'xen_efi_init' [-Werror=missing-prototypes]
arch/x86/platform/pvh/enlighten.c:120:13: error: no previous prototype for 'xen_prepare_pvh' [-Werror=missing-prototypes]
arch/x86/xen/enlighten_pv.c:1233:34: error: no previous prototype for 'xen_start_kernel' [-Werror=missing-prototypes]
arch/x86/xen/irq.c:22:14: error: no previous prototype for 'xen_force_evtchn_callback' [-Werror=missing-prototypes]
arch/x86/entry/common.c:302:24: error: no previous prototype for 'xen_pv_evtchn_do_upcall' [-Werror=missing-prototypes]
Declare all of them in an appropriate header file to avoid the warnings.
For consistency, also move the asm_cpu_bringup_and_idle() declaration
out of smp_pv.c.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230614073501.10101-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
To facilitate diskless iSCSI boot, the firmware can place a table of
configuration details in memory called the iBFT. The presence of this
table is not specified, nor is the precise location (and it's not in the
E820) so the kernel has to search for a magic marker to find it.
When running under Xen, Dom 0 does not have access to the entire host's
memory, only certain regions which are identity-mapped which means that
the pseudo-physical address in Dom0 == real host physical address.
Add the iBFT search bounds as a reserved region which causes it to be
identity-mapped in xen_set_identity_and_remap_chunk() which allows Dom0
access to the specific physical memory to correctly search for the iBFT
magic marker (and later access the full table).
This necessitates moving the call to reserve_ibft_region() somewhat
later so that it is called after e820__memory_setup() which is when the
Xen identity mapping adjustments are applied. The precise location of
the call is not too important so I've put it alongside dmi_setup() which
does similar scanning of memory for configuration tables.
Finally in the iBFT find code, instead of using isa_bus_to_virt() which
doesn't do the right thing under Xen, use early_memremap() like the
dmi_setup() code does.
The result of these changes is that it is possible to boot a diskless
Xen + Dom0 running off an iSCSI disk whereas previously it would fail to
find the iBFT and consequently, the iSCSI root disk.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Link: https://lore.kernel.org/r/20230605102840.1521549-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The xen_debug_interrupt() function is only called on x86, which has a
prototype in an architecture specific header, but the definition also
exists on others, where the lack of a prototype causes a W=1 warning:
drivers/xen/events/events_2l.c:264:13: error: no previous prototype for 'xen_debug_interrupt' [-Werror=missing-prototypes]
Move the prototype into a global header instead to avoid this warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230517124525.929201-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pick up initial support for the CXL 3.0 performance monitoring
definition. Small conflicts with the firmware update work as they both
placed their init code in the same location.
|
|
If building with -fdata-sections on riscv, LD_ORPHAN_WARN will warn
similar as below:
riscv64-linux-gnu-ld: warning: orphan section `.init.data.efi_loglevel'
from `./drivers/firmware/efi/libstub/printk.stub.o' being placed in
section `.init.data.efi_loglevel'
I believe this is caused by a a typo:
init.data.* should be .init.data.*
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Link: https://lore.kernel.org/r/20230523165502.2592-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pick up the sanitization work and the infrastructure for other
background commands for 6.5. Sanitization has a different completion
path than typical background commands so it was important to have both
thought out and implemented before either went upstream.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Drop the __weak attribute from a function prototype as it otherwise
leads to the function getting replaced by a dummy stub
- Fix the umask value setup of the frontend event as former is
different on two Intel cores
* tag 'perf_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL
perf/core: Drop __weak attribute from arch_perf_update_userpage() prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Add a ORC format hash to vmlinux and modules in order for other tools
which use it, to detect changes to it and adapt accordingly
* tag 'objtool_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Add ELF section with ORC version identifier
|
|
Request allocated from sched tags can't be issued via ->queue_rqs()
directly, since driver tag isn't allocated yet. This is the 1st misuse
of RQF_USE_SCHED for figuring out plug->has_elevator.
Request allocated from sched tags can't be ended by
blk_mq_end_request_batch() too, fix the 2nd RQF_USE_SCHED misuse
in blk_mq_add_to_batch().
Without this patch, NVMe uring cmd passthrough IO workload can run into
hang easily with real io scheduler.
Fixes: dd6216bb16e8 ("blk-mq: make sure elevator callbacks aren't called for passthrough request")
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAGS2=YrBjpLPOKa-gzcKuuOG60AGth5794PNCDwatdnnscB9ug@mail.gmail.com/
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230624130105.1443879-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that ->sendpage() has been removed, MSG_SENDPAGE_NOTLAST can be cleaned
up. Things were converted to use MSG_MORE instead, but the protocol
sendpage stubs still convert MSG_SENDPAGE_NOTLAST to MSG_MORE, which is now
unnecessary.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-17-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with
MSG_SPLICE_PAGES should be used instead. This allows multiple pages and
multipage folios to be passed through.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-06-21
mlx5 driver minor cleanup and fixes to net-next
* tag 'mlx5-updates-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type()
net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id()
net/mlx5: Remove redundant is_mdev_switchdev_mode() check from is_ib_rep_supported()
net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from is_ib_rep_supported()
net/mlx5e: E-Switch, Fix shared fdb error flow
net/mlx5e: Remove redundant comment
net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0
net/mlx5e: E-Switch, Use xarray for devcom paired device index
net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpf
net/mlx5e: Use vhca_id for device index in vport rx rules
net/mlx5: Lag, Remove duplicate code checking lag is supported
net/mlx5: Fix error code in mlx5_is_reset_now_capable()
net/mlx5: Fix reserved at offset in hca_cap register
net/mlx5: Fix SFs kernel documentation error
net/mlx5: Fix UAF in mlx5_eswitch_cleanup()
====================
Link: https://lore.kernel.org/r/20230623192907.39033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
Core WPAN changes:
- Support for active scans
- Support for answering BEACON_REQ
- Specific MLME handling for limited devices
WPAN driver changes:
- ca8210:
- Flag the devices as limited
- Remove stray gpiod_unexport() call
* tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
ieee802154: ca8210: Remove stray gpiod_unexport() call
ieee802154: ca8210: Flag the driver as being limited
net: ieee802154: Handle limited devices with only datagram support
mac802154: Handle received BEACON_REQ
ieee802154: Add support for allowing to answer BEACON_REQ
mac802154: Handle active scanning
ieee802154: Add support for user active scan requests
====================
Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make calls to extend_vma() and find_extend_vma() fail if the write lock
is required.
To avoid making this a flag-day event, this still allows the old
read-locking case for the trivial situations, and passes in a flag to
say "is it write-locked". That way write-lockers can say "yes, I'm
being careful", and legacy users will continue to work in all the common
cases until they have been fully converted to the new world order.
Co-Developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
.. and make x86 use it.
This basically extracts the existing x86 "find and expand faulting vma"
code, but extends it to also take the mmap lock for writing in case we
actually do need to expand the vma.
We've historically short-circuited that case, and have some rather ugly
special logic to serialize the stack segment expansion (since we only
hold the mmap lock for reading) that doesn't match the normal VM
locking.
That slight violation of locking worked well, right up until it didn't:
the maple tree code really does want proper locking even for simple
extension of an existing vma.
So extract the code for "look up the vma of the fault" from x86, fix it
up to do the necessary write locking, and make it available as a helper
function for other architectures that can use the common helper.
Note: I say "common helper", but it really only handles the normal
stack-grows-down case. Which is all architectures except for PA-RISC
and IA64. So some rare architectures can't use the helper, but if they
care they'll just need to open-code this logic.
It's also worth pointing out that this code really would like to have an
optimistic "mmap_upgrade_trylock()" to make it quicker to go from a
read-lock (for the common case) to taking the write lock (for having to
extend the vma) in the normal single-threaded situation where there is
no other locking activity.
But that _is_ all the very uncommon special case, so while it would be
nice to have such an operation, it probably doesn't matter in reality.
I did put in the skeleton code for such a possible future expansion,
even if it only acts as pseudo-documentation for what we're doing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge series from Biju Das <biju.das.jz@bp.renesas.com>:
This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.
The details of PMIC can be found here[1].
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.
|
|
All users have been converted to hugetlb_set_folio_subpool() so we can
safely remove this function.
Link: https://lkml.kernel.org/r/20230623054948.280627-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When memory.reclaim was introduced, it became the first case where
cgroup_reclaim() is true for the root cgroup. Johannes concluded [1] that
for most cases this is okay, except for one case. Historically, kswapd
would throttle reclaim on a node if a lot of pages marked for reclaim are
under writeback (aka the node is congested). This occurred by setting
LRUVEC_CONGESTED bit in lruvec->flags. The bit would be cleared when the
node is balanced.
Similarly, cgroup reclaim would set the same bit when an lruvec is
congested, and clear it on the way out of reclaim (to throttle local
reclaimers).
Before the introduction of memory.reclaim, the root memcg was the only
target of kswapd reclaim, and non-root memcgs were the only targets of
cgroup reclaim, so they would never interfere. Using the same bit for
both was fine. After memory.reclaim, it is possible for cgroup reclaim on
the root cgroup to clear the bit set by kswapd. This would result in
reclaim on the node to be unthrottled before the node is balanced.
Fix this by introducing separate bits for cgroup-level and node-level
congestion. kswapd can unthrottle an lruvec that is marked as congested
by cgroup reclaim (as the entire node should no longer be congested), but
not vice versa (to prevent premature unthrottling before the entire node
is balanced).
[1]https://lore.kernel.org/lkml/20230405200150.GA35884@cmpxchg.org/
Link: https://lkml.kernel.org/r/20230621023101.432780-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Closes: https://lore.kernel.org/lkml/20230405200150.GA35884@cmpxchg.org/
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now no one call [add|del]_page_to_lru_list(), let's drop unused page
interfaces.
Link:https://lkml.kernel.org/r/20230619110718.65679-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All users are now converted to use the folio_batch so we can get rid of
this data structure.
Link: https://lkml.kernel.org/r/20230621164557.3510324-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the last usage of pagevecs. There is a slight change here; we now
free the folio_batch as soon as it fills up instead of freeing the
folio_batch when we try to add a page to a full batch. This should have
no effect in practice.
Link: https://lkml.kernel.org/r/20230621164557.3510324-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This should always have been called folio_batch_count().
Link: https://lkml.kernel.org/r/20230621164557.3510324-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers have now been converted to call
check_move_unevictable_folios().
Link: https://lkml.kernel.org/r/20230621164557.3510324-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This wrapper for sg_set_page() lets drivers add folios to a scatterlist
more easily. We could, perhaps, do better by using a different page in
the folio if offset is larger than UINT_MAX, but let's hope we get a
better data structure than this before we need to care about such large
folios.
Link: https://lkml.kernel.org/r/20230621164557.3510324-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This performs the same role as __pagevec_release(), ie skipping the check
for batch length of 0.
Link: https://lkml.kernel.org/r/20230621164557.3510324-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
early_pfn_to_nid() is called frequently in init_reserved_page(), it
returns the node id of the PFN. These PFN are probably from the same
memory region, they have the same node id. It's not necessary to call
early_pfn_to_nid() for each PFN.
Pass nid to reserve_bootmem_region() and drop the call to
early_pfn_to_nid() in init_reserved_page(). Also, set nid on all reserved
pages before doing this, as some reserved memory regions may not be set
nid.
The most beneficial function is memmap_init_reserved_pages() if
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled.
The following data was tested on an x86 machine with 190GB of RAM.
before:
memmap_init_reserved_pages() 67ms
after:
memmap_init_reserved_pages() 20ms
Link: https://lkml.kernel.org/r/20230619023406.424298-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix IRQ initialization in gpiochip_irqchip_add_domain()
- add a missing return value check for platform_get_irq() in
gpio-sifive
- don't free irq_domains which GPIOLIB does not manage
* tag 'gpio-fixes-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix irq_domain resource tracking for gpiochip_irqchip_add_domain()
gpio: sifive: add missing check for platform_get_irq
gpiolib: Fix GPIO chip IRQ initialization restriction
|
|
Add support to notify the EPF device about the Bus Master Enable (BME)
event received by the EPC device from the Root complex.
Link: https://lore.kernel.org/r/20230602114756.36586-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add support to notify the EPF device about the linkdown event from the EPC
device.
Link: https://lore.kernel.org/r/20230602114756.36586-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Currently, the EPF probe function doesn't get the device ID argument needed
to correctly identify the device table ID of the EPF device.
When multiple entries are added to the "struct pci_epf_device_id" table,
the probe function needs to identify the correct one. This is achieved by
modifying the pci_epf_match_id() function to return the match ID pointer
and passing it to the driver's probe function.
pci_epf_device_match() function can return bool based on the return value
of pci_epf_match_id().
Link: https://lore.kernel.org/r/20230602114756.36586-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
pci_epf_type_add_cfs() is called only from pci_ep_cfs_add_type_group() in
drivers/pci/endpoint/pci-ep-cfs.c, so there is no need to export this
function. Move its code from pci-epf-core.c to pci-ep-cfs.c as a static
function.
Link: https://lore.kernel.org/r/20230415023542.77601-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
A member of struct mlx5_ifc_cmd_hca_cap_bits has been mistakenly
assigned the wrong reserved_at offset value. Correct it to align to the
right value, thus avoid future miscalculation.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
|
|
NT_PRFPREG note is named "CORE". Correct the comment accordingly.
Fixes: 00e19ceec80b ("ELF: Add ELF program property parsing support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/455b22b986de4d3bc6d9bfd522378e442943de5f.1687499411.git.baruch@tkos.co.il
|
|
Rename drm_sysfs_connector_status_event() to
drm_sysfs_connector_property_event(). Indeed, "status" is a bit
vague: it can easily be confused with the connected/disconnected
status of the connector. This function has nothing to do with
connected/disconnected: it merely sends a notification that a
connector's property has changed (e.g. HDCP, privacy screen, etc).
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Manasi Navare <navaremanasi@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620174231.260335-1-contact@emersion.fr
|
|
Only the stuff inside the brackets should be indented.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428100115.9802-1-contact@emersion.fr
|
|
The sm2 certificate requires a modified digest. Move the code
for the hashing from the signature verification path into the
code where we generate the digest.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add forward declaration for struct key_preparsed_payload so that
this header file is self-contained.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Split out the sign/verify functionality from the existing akcipher
interface. Most algorithms in akcipher either support encryption
and decryption, or signing and verify. Only one supports both.
As a signature algorithm may not support encryption at all, these
two should be spearated.
For now sig is simply a wrapper around akcipher as all algorithms
remain unchanged. This is a first step and allows users to start
allocating sig instead of akcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only user of akcipher does not use SG lists. Therefore forcing
users to use SG lists only results unnecessary overhead. Add a new
interface that supports arbitrary kernel pointers.
For the time being the copy will be performed unconditionally. But
this will go away once the underlying interface is updated.
Note also that only encryption and decryption is addressed by this
patch as sign/verify will go into a new interface (sig).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Purge crypto_type::init() as well.
The last user seems to be gone with commit d63007eb954e ("crypto:
ablkcipher - remove deprecated and unused ablkcipher support").
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull one more API update for UMP core.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Yet more preliminary work for the upcoming USB gadget support.
Now export the helpers to convert between legacy MIDI1 and UMP data
for handling the MIDI 1.0 USB interface. The header file is moved to
include/sound.
The API functions are slightly changed, so that they can be used
without the direct access to snd_ump object. The allocation is done
in ump.c itself as it's a simple kcalloc().
Link: https://lore.kernel.org/r/20230623075530.10976-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 6.5-rc1
Here are the USB-serial updates for 6.5-rc1, including:
- improved error handling for break signalling
- report to user space when a device does not support break signalling
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add LARA-R6 01B PIDs
USB: serial: report unsupported break signalling
USB: serial: cp210x: disable break signalling on CP2105 SCI
USB: serial: return errors from break handling
|
|
Only the imx-gpt timer driver makes use of enum imx_gpt_type that is
otherwise unused. Move its definition into the timer-imx-gpt driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230328100531.879485-3-u.kleine-koenig@pengutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-06-22
The first patch is by Carsten Schmidt, targets the kvaser_usb driver
and adds len8_dlc support.
Marcel Hellwig's patch for the xilinx_can driver adds support for CAN
transceivers via the PHY framework.
Frank Jungclaus contributes 6+2 patches for the esd_usb driver in
preparation for the upcoming CAN-USB/3 support.
The 2 patches by Miquel Raynal for the sja1000 driver work around
overruns stalls on the Renesas SoCs.
The next 3 patches are by me and fix the coding style in the
rx-offload helper and in the m_can and ti_hecc driver.
Vincent Mailhol contributes 3 patches to fix and update the
calculation of the length of CAN frames on the wire.
Oliver Hartkopp's patch moves the CAN_RAW_FILTER_MAX definition into
the correct header.
The remaining 14 patches are by Jimmy Assarsson, target the
kvaser_pciefd driver and bring various updates and improvements.
* tag 'linux-can-next-for-6.5-20230622' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (33 commits)
can: kvaser_pciefd: Use TX FIFO size read from CAN controller
can: kvaser_pciefd: Refactor code
can: kvaser_pciefd: Add len8_dlc support
can: kvaser_pciefd: Use FIELD_{GET,PREP} and GENMASK where appropriate
can: kvaser_pciefd: Sort register definitions
can: kvaser_pciefd: Change return type for kvaser_pciefd_{receive,transmit,set_tx}_irq()
can: kvaser_pciefd: Rename device ID defines
can: kvaser_pciefd: Sort includes in alphabetic order
can: kvaser_pciefd: Remove SPI flash parameter read functionality
can: uapi: move CAN_RAW_FILTER_MAX definition to raw.h
can: kvaser_pciefd: Define unsigned constants with type suffix 'U'
can: kvaser_pciefd: Set hardware timestamp on transmitted packets
can: kvaser_pciefd: Add function to set skb hwtstamps
can: kvaser_pciefd: Remove handler for unused KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK
can: kvaser_pciefd: Remove useless write to interrupt register
can: length: refactor frame lengths definition to add size in bits
can: length: fix bitstuffing count
can: length: fix description of the RRS field
can: m_can: fix coding style
can: ti_hecc: fix coding style
...
====================
Link: https://lore.kernel.org/r/20230622082658.571150-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
