summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: introduce and use genl_family_attrbuf()Johannes Berg
This helper function allows family implementations to access their family's attrbuf. This gets rid of the attrbuf usage in families, and also adds locking validation, since it's not valid to use the attrbuf with parallel_ops or outside of the dumpit callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27skbedit: allow the user to specify bitmask for markAntonio Quartulli
The user may want to use only some bits of the skb mark in his skbedit rules because the remaining part might be used by something else. Introduce the "mask" parameter to the skbedit actor in order to implement such functionality. When the mask is specified, only those bits selected by the latter are altered really changed by the actor, while the rest is left untouched. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27Merge tag 'xfs-fixes-for-linus-4.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "This update contains fixes for most of the outstanding regressions introduced with the 4.9-rc1 XFS merge. There is also a fix for an iomap bug, too. This is a quite a bit larger than I'd prefer for a -rc3, but most of the change comes from cleaning up the new reflink copy on write code; it's much simpler and easier to understand now. These changes fixed several bugs in the new code, and it wasn't clear that there was an easier/simpler way to fix them. The rest of the fixes are the usual size you'd expect at this stage. I've left the commits to soak in linux-next for a some extra time because of the size before asking you to pull, no new problems with them have been reported so I think it's all OK. Summary: - iomap page offset masking fix for page faults - add IOMAP_REPORT to distinguish between read and fiemap map requests - cleanups to new shared data extent code - fix mount active status on failed log recovery - fix broken dquots in a buffer calculation - fix locking order issues and merge xfs_reflink_remap_range and xfs_file_share_range - rework unmapping of CoW extents and remove now unused functions - clean state when CoW is done" * tag 'xfs-fixes-for-linus-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (25 commits) xfs: clear cowblocks tag when cow fork is emptied xfs: fix up inode cowblocks tracking tracepoints fs: Do to trim high file position bits in iomap_page_mkwrite_actor xfs: remove xfs_bunmapi_cow xfs: optimize xfs_reflink_end_cow xfs: optimize xfs_reflink_cancel_cow_blocks xfs: refactor xfs_bunmapi_cow xfs: optimize writes to reflink files xfs: don't bother looking at the refcount tree for reads xfs: handle "raw" delayed extents xfs_reflink_trim_around_shared xfs: add xfs_trim_extent iomap: add IOMAP_REPORT xfs: merge xfs_reflink_remap_range and xfs_file_share_range xfs: remove xfs_file_wait_for_io xfs: move inode locking from xfs_reflink_remap_range to xfs_file_share_range xfs: fix the same_inode check in xfs_file_share_range xfs: remove the same fs check from xfs_file_share_range libxfs: v3 inodes are only valid on crc-enabled filesystems libxfs: clean up _calc_dquots_per_chunk xfs: unset MS_ACTIVE if mount fails ...
2016-10-27netfilter: conntrack: avoid excess memory allocationFlorian Westphal
This is now a fixed-size extension, so we don't need to pass a variable alloc size. This (harmless) error results in allocating 32 instead of the needed 16 bytes for this extension as the size gets passed twice. Fixes: 23014011ba420 ("netfilter: conntrack: support a fixed size of 128 distinct labels") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-27netfilter: nf_tables: fix type mismatch with error return from ↵John W. Linville
nft_parse_u32_check Commit 36b701fae12ac ("netfilter: nf_tables: validate maximum value of u32 netlink attributes") introduced nft_parse_u32_check with a return value of "unsigned int", yet on error it returns "-ERANGE". This patch corrects the mismatch by changing the return value to "int", which happens to match the actual users of nft_parse_u32_check already. Found by Coverity, CID 1373930. Note that commit 21a9e0f1568ea ("netfilter: nft_exthdr: fix error handling in nft_exthdr_init()) attempted to address the issue, but did not address the return type of nft_parse_u32_check. Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Laura Garcia Liebana <nevola@gmail.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 36b701fae12ac ("netfilter: nf_tables: validate maximum value...") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-27mm: remove per-zone hashtable of bitlock waitqueuesLinus Torvalds
The per-zone waitqueues exist because of a scalability issue with the page waitqueues on some NUMA machines, but it turns out that they hurt normal loads, and now with the vmalloced stacks they also end up breaking gfs2 that uses a bit_wait on a stack object: wait_on_bit(&gh->gh_iflags, HIF_WAIT, TASK_UNINTERRUPTIBLE) where 'gh' can be a reference to the local variable 'mount_gh' on the stack of fill_super(). The reason the per-zone hash table breaks for this case is that there is no "zone" for virtual allocations, and trying to look up the physical page to get at it will fail (with a BUG_ON()). It turns out that I actually complained to the mm people about the per-zone hash table for another reason just a month ago: the zone lookup also hurts the regular use of "unlock_page()" a lot, because the zone lookup ends up forcing several unnecessary cache misses and generates horrible code. As part of that earlier discussion, we had a much better solution for the NUMA scalability issue - by just making the page lock have a separate contention bit, the waitqueue doesn't even have to be looked at for the normal case. Peter Zijlstra already has a patch for that, but let's see if anybody even notices. In the meantime, let's fix the actual gfs2 breakage by simplifying the bitlock waitqueues and removing the per-zone issue. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27netfilter: nf_tables: fix *leak* when expr clone failLiping Zhang
When nft_expr_clone failed, a series of problems will happen: 1. module refcnt will leak, we call __module_get at the beginning but we forget to put it back if ops->clone returns fail 2. memory will be leaked, if clone fail, we just return NULL and forget to free the alloced element 3. set->nelems will become incorrect when set->size is specified. If clone fail, we should decrease the set->nelems Now this patch fixes these problems. And fortunately, clone fail will only happen on counter expression when memory is exhausted. Fixes: 086f332167d6 ("netfilter: nf_tables: add clone interface to expression operations") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-27tty: vgacon+sisusb, move scrolldelta to a common helperJiri Slaby
The code is mirrorred in scrolldelta implementations of both vgacon and sisusb. Let's move the code to a separate helper where we will perform a common cleanup and further changes. While we are moving the code, make it linear and save one indentation level. This is done by returning from the "!lines" then-branch immediatelly. This allows flushing the else-branch 1 level to the left, obviously. Few more new lines and comments were added too. And do not forget to export the helper function given sisusb can be built as module. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: <linux-fbdev@vger.kernel.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27tty: vt, cleanup and document con_scrollJiri Slaby
Scrolling helpers scrup and scrdown both accept 'top' and 'bottom' as unsigned int. Number of lines 'nr' is accepted as int, but all callers pass down unsigned too. So change the type of 'nr' to unsigned too. Now, promote unsigned int from the helpers up to the con_scroll hook which actually accepted all those as signed int. Next, the 'dir' parameter can have only two values and we define constants for that: SM_UP and SM_DOWN. Switch them to enum and do proper type checking on 'dir' too. Finally, document the behaviour of the hook. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: <linux-fbdev@vger.kernel.org> Cc: <linux-usb@vger.kernel.org> Cc: <linux-parisc@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27cfg80211: Add support to update connection parametersvamsi krishna
Add functionality to update the connection parameters when in connected state, so that driver/firmware uses the updated parameters for subsequent roaming. This is for drivers that support internal BSS selection and roaming. The new command does not change the current association state, i.e., it can be used to update IE contents for future (re)associations without causing an immediate disassociation or reassociation with the current BSS. This commit implements the required functionality for updating IEs for (Re)Association Request frame only. Other parameters can be added in future when required. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: configure multicast to unicast for AP interfacesMichael Braun
Add the ability to configure if an AP (and associated VLANs) will do multicast-to-unicast conversion for ARP, IPv4 and IPv6 frames (possibly within 802.1Q). If enabled, such frames are to be sent to each station separately, with the DA replaced by their own MAC address rather than the group address. Note that this may break certain expectations of the receiver, such as the ability to drop unicast IP packets received within multicast L2 frames, or the ability to not send ICMP destination unreachable messages for packets received in L2 multicast (which is required, but the receiver can't tell the difference if this new option is enabled.) This also doesn't implement the 802.11 DMS (directed multicast service). Signed-off-by: Michael Braun <michael-dev@fami-braun.de> [fix disabling, add better documentation & commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add KEK/nonces for FILS association framesJouni Malinen
The new nl80211 attributes can be used to provide KEK and nonces to allow the driver to encrypt and decrypt FILS (Re)Association Request/Response frames in station mode. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add Fast Initial Link Setup (FILS) auth algsJouni Malinen
This defines authentication algorithms for FILS (IEEE 802.11ai). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Define IEEE P802.11ai (FILS) information elementsJouni Malinen
Define the Element IDs and Element ID Extensions from IEEE P802.11ai/D11.0. In addition, add a new cfg80211_find_ext_ie() wrapper to make it easier to find information elements that used the Element ID Extension field. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add feature flag for Fast Initial Link Setup (FILS) as STAJouni Malinen
This defines a feature flag that drivers can use to indicate that they support FILS authentication/association (IEEE 802.11ai) when using user space SME (NL80211_CMD_AUTHENTICATE) in station mode. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Rename SAE_DATA to more generic AUTH_DATAJouni Malinen
This adds defines and nl80211 extensions to allow FILS Authentication to be implemented similarly to SAE. FILS does not need the special rules for the Authentication transaction number and Status code fields, but it does need to add non-IE fields. The previously used NL80211_ATTR_SAE_DATA can be reused for this to avoid having to duplicate that implementation. Rename that attribute to more generic NL80211_ATTR_AUTH_DATA (with backwards compatibility define for NL80211_SAE_DATA). Also document the special rules related to the Authentication transaction number and Status code fiels. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27firmware: ti_sci: Add support for reboot core serviceNishanth Menon
Since system controller now has control over SoC power management, it needs to be explicitly requested to reboot the SoC. Add support for it. In some systems however, SoC needs to toggle a GPIO or send event to an external entity (like a PMIC) for a system reboot to take place. To facilitate that, we allow for a DT property to determine if the reboot handler will be registered and further, the service is also made available to other drivers (such as PMIC driver) to sequence the additional operation and trigger the SoC reboot as the last step. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2016-10-27firmware: ti_sci: Add support for Clock controlNishanth Menon
Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used in Texas Instrument's System on Chip (SoC) such as those in keystone family K2G SoC to communicate between various compute processors with a central system controller entity. TI-SCI message protocol provides support for management of various hardware entities within the SoC. Add support driver to allow communication with system controller entity within the SoC using the mailbox client. In general, we expect to function at a device level of abstraction, however, for proper operation of hardware blocks, many clocks directly supplying the hardware block needs to be queried or configured. Introduce support for the set of SCI message protocol support that provide us with this capability. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2016-10-27firmware: ti_sci: Add support for Device controlNishanth Menon
Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used in Texas Instrument's System on Chip (SoC) such as those in keystone family K2G SoC to communicate between various compute processors with a central system controller entity. TI-SCI message protocol provides support for management of various hardware entitites within the SoC. Add support driver to allow communication with system controller entity within the SoC using the mailbox client. We introduce the fundamental device management capability support to the driver protocol as part of this change. [d-gerlach@ti.com: Contributed device reset handling] Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2016-10-27firmware: Add basic support for TI System Control Interface (TI-SCI) protocolNishanth Menon
Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used in Texas Instrument's System on Chip (SoC) such as those in keystone family K2G SoC to communicate between various compute processors with a central system controller entity. TI-SCI message protocol provides support for management of various hardware entities within the SoC. Add support driver to allow communication with system controller entity within the SoC using the mailbox client. We introduce the basic registration and query capability for the driver protocol as part of this change. Subsequent patches add in functionality specific to the TI-SCI features. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2016-10-27cfg80211: validate beacon int as part of iface combinationsJohannes Berg
Remove the pointless checking against interface combinations in the initial basic beacon interval validation, that currently isn't taking into account radar detection or channels properly. Instead, just validate the basic range there, and then delay real checking to the interface combination validation that drivers must do. This means that drivers wanting to use the beacon_int_min_gcd will now have to pass the new_beacon_int when validating the AP/mesh start. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: add generic helper to check interface is runningArend Van Spriel
Add a helper using wdev to check if interface is running. This deals with both non-netdev and netdev interfaces. In struct wireless_dev replace 'p2p_started' and 'nan_started' by 'is_running' as those are mutually exclusive anyway, and unify all the code to use wdev_running(). Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-26udp: fix IP_CHECKSUM handlingEric Dumazet
First bug was added in commit ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sam Kumar <samanthakumar@google.com> Cc: Willem de Bruijn <willemb@google.com> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26doc: update docbook annotations for socket and skbStephen Hemminger
The skbuff and sock structure both had missing parameter annotation values. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: phy: broadcom: Add support for BCM54612EXo Wang
This PHY has internal delays enabled after reset. This clears the internal delay enables unless the interface specifically requests them. Signed-off-by: Xo Wang <xow@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: phy: broadcom: Update Auxiliary Control Register macrosXo Wang
Add the RXD-to-RXC skew (delay) time bit in the Miscellaneous Control shadow register and a mask for the shadow selector field. Remove a re-definition of MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL. Signed-off-by: Xo Wang <xow@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26drm: mark drm_of_component_match_add dummy inlineArnd Bergmann
The newly added drm_of_component_match_add helper is defined as 'static' in a header when CONFIG_OF is disabled, causing a warning each time the header is included: In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0: include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function] This marks it 'inline' like the other such helpers in this file. Fixes: 97ac0e47aed5 ("drm: convert DT component matching to component_match_add_release()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161026085759.3875472-1-arnd@arndb.de
2016-10-26drm: Don't force all planes to be added to the state due to zposVille Syrjälä
We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lyude <cpaul@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26mac80211: fix some sphinx warningsJani Nikula
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-26x86/io: add interface to reserve io memtype for a resource range. (v1.1)Dave Airlie
A recent change to the mm code in: 87744ab3832b mm: fix cache mode tracking in vm_insert_mixed() started enforcing checking the memory type against the registered list for amixed pfn insertion mappings. It happens that the drm drivers for a number of gpus relied on this being broken. Currently the driver only inserted VRAM mappings into the tracking table when they came from the kernel, and userspace mappings never landed in the table. This led to a regression where all the mapping end up as UC instead of WC now. I've considered a number of solutions but since this needs to be fixed in fixes and not next, and some of the solutions were going to introduce overhead that hadn't been there before I didn't consider them viable at this stage. These mainly concerned hooking into the TTM io reserve APIs, but these API have a bunch of fast paths I didn't want to unwind to add this to. The solution I've decided on is to add a new API like the arch_phys_wc APIs (these would have worked but wc_del didn't take a range), and use them from the drivers to add a WC compatible mapping to the table for all VRAM on those GPUs. This means we can then create userspace mapping that won't get degraded to UC. v1.1: use CONFIG_X86_PAT + add some comments in io.h Cc: Toshi Kani <toshi.kani@hp.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: x86@kernel.org Cc: mcgrof@suse.com Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-10-26video: add header file for Mobile High-Definition Link (MHL) interfaceAndrzej Hajda
This header adds definitions specific to MHL protocol. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-2-git-send-email-a.hajda@samsung.com
2016-10-25ASoC: Drop SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME flagSylwester Nawrocki
Since commit 194c7dea00c68c1b1f8ff26304fa937a006f66dd "ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config" custom DMA channels can be also specified in chan_names[] field of struct snd_dmaengine_pcm_config. This patch removes chan_name field of struct snd_dmaengine_dai_dma_data as it is now unused. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-25drm/ttm: make eviction decision a driver callback v2Christian König
This way the driver can decide if it is valuable to evict a BO or not. The current implementation is added as default to all existing drivers. v2: fix some typos found during internal testing Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/ttm: fix coding style in ttm_bo_driver.hChristian König
A few 80chars issues and spaces at wrong places. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amdgpu:new ids flag for preemptMonk Liu
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amdgpu: add info ioctl query for vce clock info (v3)Alex Deucher
This is needed to set up the vce clock table in userspace for proper VCE DPM. v2: fix copy paste typo in comment v3: track number of valid states Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amd/amdgpu: unify memory query info interfaceJunwei Zhang
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amdgpu: add AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS flag v3Christian König
Add a flag noting that a BO must be created using linear VRAM and set this flag on all in kernel users where appropriate. Hopefully I haven't missed anything. v2: add it in a few more places, fix CPU mapping. v3: rename to VRAM_CONTIGUOUS, fix typo in CS code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amd/amdgpu: add info about vram and gtt max allocation sizeJunwei Zhang
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25drm/amd/amdgpu: add info about vram and gtt total sizeJunwei Zhang
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-25platform/chrome: Introduce a new function to check EC features.Vincent Palatin
Use the EC_CMD_GET_FEATURES message to check the supported features for each MCU. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> [tomeu: adapted to changes in mainline] Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> [enric: remove references to USB PD feature and do it more generic] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> For the MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-25iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.Enric Balletbo i Serra
Add the core functions to be able to support the sensors attached behind the ChromeOS Embedded Controller and used by other IIO cros-ec sensor drivers. The cros_ec_sensor_core driver matches with current driver in ChromeOS 4.4 tree, so it includes all the fixes at the moment. The support for this driver was made by Gwendal Grignou. The original patch and all the fixes has been squashed and rebased on top of mainline. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> [eballetbo: split, squash and rebase on top of mainline the patches found in ChromeOS tree] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-25drm: convert DT component matching to component_match_add_release()Russell King
Convert DT component matching to use component_match_add_release(). Acked-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
2016-10-25ASoC: rt5514: Add the DMIC initial delay to wait it ready.Oder Chiou
Due to the DMIC that needs time to initial after the MCLK is provided, the field of delay time is implemented by the platform data. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-25dma-buf: Rename struct fence to dma_fenceChris Wilson
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25locking/mutex: Kill arch specific codePeter Zijlstra
Its all generic atomic_long_t stuff now. Tested-by: Jason Low <jason.low2@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25locking/mutex: Rework mutex::ownerPeter Zijlstra
The current mutex implementation has an atomic lock word and a non-atomic owner field. This disparity leads to a number of issues with the current mutex code as it means that we can have a locked mutex without an explicit owner (because the owner field has not been set, or already cleared). This leads to a number of weird corner cases, esp. between the optimistic spinning and debug code. Where the optimistic spinning code needs the owner field updated inside the lock region, the debug code is more relaxed because the whole lock is serialized by the wait_lock. Also, the spinning code itself has a few corner cases where we need to deal with a held lock without an owner field. Furthermore, it becomes even more of a problem when trying to fix starvation cases in the current code. We end up stacking special case on special case. To solve this rework the basic mutex implementation to be a single atomic word that contains the owner and uses the low bits for extra state. This matches how PI futexes and rt_mutex already work. By having the owner an integral part of the lock state a lot of the problems dissapear and we get a better option to deal with starvation cases, direct owner handoff. Changing the basic mutex does however invalidate all the arch specific mutex code; this patch leaves that unused in-place, a later patch will remove that. Tested-by: Jason Low <jason.low2@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25sched/core: Explain sleep/wakeup in a better wayPeter Zijlstra
There were a few questions wrt. how sleep-wakeup works. Try and explain it more. Requested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-17 02:35:16 +0000