| Age | Commit message (Collapse) | Author |
|---|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
|
|
Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.
Link: https://lore.kernel.org/r/a2ab630d2a634547db9b581faa9d65da2edb9d05.1639554831.git.leonro@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When iterating a list, a particular request may need to be moved for
special handling. Provide a helper function to achieve that so drivers
don't need to reimplement rqlist manipulation.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220105170518.3181469-4-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While iterating a list, a particular request may need to be removed for
special handling. Provide an iterator that can safely handle that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220105170518.3181469-3-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the request list macros to the header file that defines that struct
they operate on.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220105170518.3181469-2-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Several drivers used same function to initialize query MAD,
so move that function to global header file.
Link: https://lore.kernel.org/r/af6f35c590ff5ef56d0137351b8b295af0f7c13c.1641369858.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
'for-next/stacktrace', 'for-next/xor-neon', 'for-next/kasan', 'for-next/armv8_7-fp', 'for-next/atomics', 'for-next/bti', 'for-next/sve', 'for-next/kselftest' and 'for-next/kcsan', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (32 commits)
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: perf: Support new DT compatibles
arm64: perf: Simplify registration boilerplate
arm64: perf: Support Denver and Carmel PMUs
drivers/perf: hisi: Add driver for HiSilicon PCIe PMU
docs: perf: Add description for HiSilicon PCIe PMU driver
dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings
drivers: perf: Add LLC-TAD perf counter support
perf/smmuv3: Synthesize IIDR from CoreSight ID registers
perf/smmuv3: Add devicetree support
dt-bindings: Add Arm SMMUv3 PMCG binding
perf/arm-cmn: Add debugfs topology info
perf/arm-cmn: Add CI-700 Support
dt-bindings: perf: arm-cmn: Add CI-700
perf/arm-cmn: Support new IP features
perf/arm-cmn: Demarcate CMN-600 specifics
perf/arm-cmn: Move group validation data off-stack
perf/arm-cmn: Optimise DTC counter accesses
...
* for-next/misc:
: Miscellaneous patches
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64/fp: Add comments documenting the usage of state restore functions
arm64: mm: Use asid feature macro for cheanup
arm64: mm: Rename asid2idx() to ctxid2asid()
arm64: kexec: reduce calls to page_address()
arm64: extable: remove unused ex_handler_t definition
arm64: entry: Use SDEI event constants
arm64: Simplify checking for populated DT
arm64/kvm: Fix bitrotted comment for SVE handling in handle_exit.c
* for-next/cache-ops-dzp:
: Avoid DC instructions when DCZID_EL0.DZP == 1
arm64: mte: DC {GVA,GZVA} shouldn't be used when DCZID_EL0.DZP == 1
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
* for-next/stacktrace:
: Unify the arm64 unwind code
arm64: Make some stacktrace functions private
arm64: Make dump_backtrace() use arch_stack_walk()
arm64: Make profile_pc() use arch_stack_walk()
arm64: Make return_address() use arch_stack_walk()
arm64: Make __get_wchan() use arch_stack_walk()
arm64: Make perf_callchain_kernel() use arch_stack_walk()
arm64: Mark __switch_to() as __sched
arm64: Add comment for stack_info::kr_cur
arch: Make ARCH_STACKWALK independent of STACKTRACE
* for-next/xor-neon:
: Use SHA3 instructions to speed up XOR
arm64/xor: use EOR3 instructions when available
* for-next/kasan:
: Log potential KASAN shadow aliases
arm64: mm: log potential KASAN shadow alias
arm64: mm: use die_kernel_fault() in do_mem_abort()
* for-next/armv8_7-fp:
: Add HWCAPS for ARMv8.7 FEAT_AFP amd FEAT_RPRES
arm64: cpufeature: add HWCAP for FEAT_RPRES
arm64: add ID_AA64ISAR2_EL1 sys register
arm64: cpufeature: add HWCAP for FEAT_AFP
* for-next/atomics:
: arm64 atomics clean-ups and codegen improvements
arm64: atomics: lse: define RETURN ops in terms of FETCH ops
arm64: atomics: lse: improve constraints for simple ops
arm64: atomics: lse: define ANDs in terms of ANDNOTs
arm64: atomics lse: define SUBs in terms of ADDs
arm64: atomics: format whitespace consistently
* for-next/bti:
: BTI clean-ups
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: Use BTI C directly and unconditionally
arm64: Unconditionally override SYM_FUNC macros
arm64: Add macro version of the BTI instruction
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
* for-next/sve:
: SVE code clean-ups and refactoring in prepararation of Scalable Matrix Extensions
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
* for-next/kselftest:
: arm64 kselftest additions
kselftest/arm64: Add pidbench for floating point syscall cases
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
* for-next/kcsan:
: Enable KCSAN for arm64
arm64: Enable KCSAN
|
|
<linux/device.h>
The <linux/usb/ch9.h> header is used over 1,400 times in a typical distro
build, but few of its users actually need the full <linux/device.h> header.
--------------------------------------------------------------------
| Combined, preprocessed C code size of header, without line markers,
| with comments stripped:
-------------------------
before: | #include <linux/usb/ch9.h> | LOC: 7,078 | headers: 172
after: | #include <linux/usb/ch9.h> | LOC: 812 | headers: 38
Remove it and add it to the places that need it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-01-05
this is a pull request of 15 patches for net-next/master.
The first patch is by me and removed an unused variable from the
usb_8dev driver.
Andy Shevchenko contributes a patch for the mcp251x driver, which
removes an unneeded assignment.
Jimmy Assarsson's patch for the kvaser_usb makes use of units.h in the
assignment of frequencies.
Lad Prabhakar provides 2 patches, converting the ti_hecc and the
sja1000 driver to make use of platform_get_irq().
The 10 remaining patches are by Vincent Mailhol. First the etas_es58x
driver populates the net_device::dev_port. The next 5 patches cleanup
the handling of CAN error and CAN RTR messages of all drivers. The
remaining 4 patches enhance the CAN controller mode flag handling and
export it via netlink to user space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a 7 byte hole after dst->setup and a 4 byte hole after
dst->default_proto. Combining them, we have a single hole of just 3
bytes on 64 bit machines.
Before:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
bool setup; /* 56 1 */
/* XXX 7 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
const struct dsa_device_ops * tag_ops; /* 64 8 */
enum dsa_tag_protocol default_proto; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 80 8 */
struct list_head rtable; /* 88 16 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
After:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
const struct dsa_device_ops * tag_ops; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
enum dsa_tag_protocol default_proto; /* 64 4 */
bool setup; /* 68 1 */
/* XXX 3 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 72 8 */
struct list_head rtable; /* 80 16 */
unsigned int lags_len; /* 96 4 */
unsigned int last_switch; /* 100 4 */
/* size: 104, cachelines: 2, members: 13 */
/* sum members: 101, holes: 1, sum holes: 3 */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dst->ports is accessed most notably by dsa_master_find_slave(), which is
invoked in the RX path.
dst->lags is accessed by dsa_lag_dev(), which is invoked in the RX path
of tag_dsa.c.
dst->tag_ops, dst->default_proto and dst->pd don't need to be in the
first cache line, so they are moved out by this change.
Before:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct raw_notifier_head nh; /* 16 8 */
unsigned int index; /* 24 4 */
struct kref refcount; /* 28 4 */
bool setup; /* 32 1 */
/* XXX 7 bytes hole, try to pack */
const struct dsa_device_ops * tag_ops; /* 40 8 */
enum dsa_tag_protocol default_proto; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct list_head ports; /* 64 16 */
struct list_head rtable; /* 80 16 */
struct net_device * * lags; /* 96 8 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
After:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
bool setup; /* 56 1 */
/* XXX 7 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
const struct dsa_device_ops * tag_ops; /* 64 8 */
enum dsa_tag_protocol default_proto; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 80 8 */
struct list_head rtable; /* 88 16 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, num_ports is declared as size_t, which is defined as
__kernel_ulong_t, therefore it occupies 8 bytes of memory.
Even switches with port numbers in the range of tens are exotic, so
there is no need for this amount of storage.
Additionally, because the max_num_bridges member right above it is also
4 bytes, it means the compiler needs to add padding between the last 2
fields. By reducing the size, we don't need that padding and can reduce
the struct size.
Before:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 136 8 */
/* size: 144, cachelines: 3, members: 27 */
/* sum members: 132, holes: 2, sum holes: 8 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
After:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
unsigned int num_ports; /* 132 4 */
/* size: 136, cachelines: 3, members: 27 */
/* sum members: 128, holes: 1, sum holes: 4 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct dsa_switch has 9 boolean properties, many of which are in fact
set by drivers for custom behavior (vlan_filtering_is_global,
needs_standalone_vlan_filtering, etc etc). The binary layout of the
structure could be improved. For example, the "bool setup" at the
beginning introduces a gratuitous 7 byte hole in the first cache line.
The change merges all boolean properties into bitfields of an u32, and
places that u32 in the first cache line of the structure, since many
bools are accessed from the data path (untag_bridge_pvid, vlan_filtering,
vlan_filtering_is_global).
We place this u32 after the existing ds->index, which is also 4 bytes in
size. As a positive side effect, ds->tagger_data now fits into the first
cache line too, because 4 bytes are saved.
Before:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
bool setup; /* 0 1 */
/* XXX 7 bytes hole, try to pack */
struct device * dev; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
unsigned int index; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
struct notifier_block nb; /* 32 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
void * tagger_data; /* 64 8 */
struct dsa_chip_data * cd; /* 72 8 */
const struct dsa_switch_ops * ops; /* 80 8 */
u32 phys_mii_mask; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 96 8 */
unsigned int ageing_time_min; /* 104 4 */
unsigned int ageing_time_max; /* 108 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 112 8 */
struct devlink * devlink; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int num_tx_queues; /* 128 4 */
bool vlan_filtering_is_global; /* 132 1 */
bool needs_standalone_vlan_filtering; /* 133 1 */
bool configure_vlan_while_not_filtering; /* 134 1 */
bool untag_bridge_pvid; /* 135 1 */
bool assisted_learning_on_cpu_port; /* 136 1 */
bool vlan_filtering; /* 137 1 */
bool pcs_poll; /* 138 1 */
bool mtu_enforcement_ingress; /* 139 1 */
unsigned int num_lag_ids; /* 140 4 */
unsigned int max_num_bridges; /* 144 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 152 8 */
/* size: 160, cachelines: 3, members: 27 */
/* sum members: 141, holes: 4, sum holes: 19 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 32 bytes */
};
After:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 136 8 */
/* size: 144, cachelines: 3, members: 27 */
/* sum members: 132, holes: 2, sum holes: 8 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both dsa_port :: type and dsa_port :: index introduce a 4 octet hole
after them, so we can group them together and the holes would be
eliminated, turning 16 octets of storage into just 8. This makes the
cpu_dp pointer fit in the first cache line, which is good, because
dsa_slave_to_master(), called by dsa_enqueue_skb(), uses it.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
u8 vlan_filtering:1; /* 79: 0 1 */
u8 learning:1; /* 79: 1 1 */
u8 lag_tx_enabled:1; /* 79: 2 1 */
u8 devlink_port_setup:1; /* 79: 3 1 */
u8 setup:1; /* 79: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct phylink * pl; /* 392 8 */
struct phylink_config pl_config; /* 400 40 */
struct net_device * lag_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * hsr_dev; /* 448 8 */
struct list_head list; /* 456 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 472 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 480 8 */
struct mutex addr_lists_lock; /* 488 32 */
/* --- cacheline 8 boundary (512 bytes) was 8 bytes ago --- */
struct list_head fdbs; /* 520 16 */
struct list_head mdbs; /* 536 16 */
/* size: 552, cachelines: 9, members: 30 */
/* sum members: 539, holes: 3, sum holes: 12 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 40 bytes */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
struct dsa_switch * ds; /* 32 8 */
unsigned int index; /* 40 4 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 44 4 */
const char * name; /* 48 8 */
struct dsa_port * cpu_dp; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u8 mac[6]; /* 64 6 */
u8 stp_state; /* 70 1 */
u8 vlan_filtering:1; /* 71: 0 1 */
u8 learning:1; /* 71: 1 1 */
u8 lag_tx_enabled:1; /* 71: 2 1 */
u8 devlink_port_setup:1; /* 71: 3 1 */
u8 setup:1; /* 71: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 72 8 */
unsigned int ageing_time; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 88 8 */
struct devlink_port devlink_port; /* 96 288 */
/* --- cacheline 6 boundary (384 bytes) --- */
struct phylink * pl; /* 384 8 */
struct phylink_config pl_config; /* 392 40 */
struct net_device * lag_dev; /* 432 8 */
struct net_device * hsr_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct list_head list; /* 448 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 464 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 472 8 */
struct mutex addr_lists_lock; /* 480 32 */
/* --- cacheline 8 boundary (512 bytes) --- */
struct list_head fdbs; /* 512 16 */
struct list_head mdbs; /* 528 16 */
/* size: 544, cachelines: 9, members: 30 */
/* sum members: 539, holes: 1, sum holes: 4 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 32 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct dsa_port has 5 bool members which create quite a number of 7 byte
holes in the structure layout. By merging them all into bitfields of an
u8, and placing that u8 in the 1-byte hole after dp->mac and dp->stp_state,
we can reduce the structure size from 576 bytes to 552 bytes on arm64.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
/* XXX 1 byte hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
/* XXX 2 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
u8 vlan_filtering:1; /* 79: 0 1 */
u8 learning:1; /* 79: 1 1 */
u8 lag_tx_enabled:1; /* 79: 2 1 */
u8 devlink_port_setup:1; /* 79: 3 1 */
u8 setup:1; /* 79: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct phylink * pl; /* 392 8 */
struct phylink_config pl_config; /* 400 40 */
struct net_device * lag_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * hsr_dev; /* 448 8 */
struct list_head list; /* 456 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 472 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 480 8 */
struct mutex addr_lists_lock; /* 488 32 */
/* --- cacheline 8 boundary (512 bytes) was 8 bytes ago --- */
struct list_head fdbs; /* 520 16 */
struct list_head mdbs; /* 536 16 */
/* size: 552, cachelines: 9, members: 30 */
/* sum members: 539, holes: 3, sum holes: 12 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MAC address of a port is 6 octets in size, and this creates a 2
octet hole after it. There are some other u8 members of struct dsa_port
that we can put in that hole. One such member is the stp_state.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
/* XXX 2 bytes hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
u8 stp_state; /* 94 1 */
/* XXX 1 byte hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
/* XXX 1 byte hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
/* XXX 2 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.17
Not much going on framework release this time, but a big update for
drivers especially the Intel and SOF ones.
- Refinements and cleanups around the delay() APIs.
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code.
- Support for pin switches in simple-card derived cards.
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx.
|
|
Pull 5.17 materials.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a couple of helpers and definitions to extract the clause 45 regad
and devad fields from the regnum passed into MDIO drivers.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the CAN netlink interface provides no easy ways to check
the capabilities of a given controller. The only method from the
command line is to try each CAN_CTRLMODE_* individually to check
whether the netlink interface returns an -EOPNOTSUPP error or not
(alternatively, one may find it easier to directly check the source
code of the driver instead...)
This patch introduces a method for the user to check both the
supported and the static capabilities. The proposed method introduces
a new IFLA nest: IFLA_CAN_CTRLMODE_EXT which extends the current
IFLA_CAN_CTRLMODE. This is done to guaranty a full forward and
backward compatibility between the kernel and the user land
applications.
The IFLA_CAN_CTRLMODE_EXT nest contains one single entry:
IFLA_CAN_CTRLMODE_SUPPORTED. Because this entry is only used in one
direction: kernel to userland, no new struct nla_policy are
introduced.
Below table explains how IFLA_CAN_CTRLMODE_SUPPORTED (hereafter:
"supported") and can_ctrlmode::flags (hereafter: "flags") allow us to
identify both the supported and the static capabilities, when masked
with any of the CAN_CTRLMODE_* bit flags:
supported & flags & Controller capabilities
CAN_CTRLMODE_* CAN_CTRLMODE_*
-----------------------------------------------------------------------
false false Feature not supported (always disabled)
false true Static feature (always enabled)
true false Feature supported but disabled
true true Feature supported and enabled
Link: https://lore.kernel.org/all/20211213160226.56219-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Save eight bytes of holes on x86-64 architectures by reordering the
members of struct can_priv.
Before:
| $ pahole -C can_priv drivers/net/can/dev/dev.o
| struct can_priv {
| struct net_device * dev; /* 0 8 */
| struct can_device_stats can_stats; /* 8 24 */
| const struct can_bittiming_const * bittiming_const; /* 32 8 */
| const struct can_bittiming_const * data_bittiming_const; /* 40 8 */
| struct can_bittiming bittiming; /* 48 32 */
| /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
| struct can_bittiming data_bittiming; /* 80 32 */
| const struct can_tdc_const * tdc_const; /* 112 8 */
| struct can_tdc tdc; /* 120 12 */
| /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
| unsigned int bitrate_const_cnt; /* 132 4 */
| const u32 * bitrate_const; /* 136 8 */
| const u32 * data_bitrate_const; /* 144 8 */
| unsigned int data_bitrate_const_cnt; /* 152 4 */
| u32 bitrate_max; /* 156 4 */
| struct can_clock clock; /* 160 4 */
| unsigned int termination_const_cnt; /* 164 4 */
| const u16 * termination_const; /* 168 8 */
| u16 termination; /* 176 2 */
|
| /* XXX 6 bytes hole, try to pack */
|
| struct gpio_desc * termination_gpio; /* 184 8 */
| /* --- cacheline 3 boundary (192 bytes) --- */
| u16 termination_gpio_ohms[2]; /* 192 4 */
| enum can_state state; /* 196 4 */
| u32 ctrlmode; /* 200 4 */
| u32 ctrlmode_supported; /* 204 4 */
| int restart_ms; /* 208 4 */
|
| /* XXX 4 bytes hole, try to pack */
|
| struct delayed_work restart_work; /* 216 88 */
|
| /* XXX last struct has 4 bytes of padding */
|
| /* --- cacheline 4 boundary (256 bytes) was 48 bytes ago --- */
| int (*do_set_bittiming)(struct net_device *); /* 304 8 */
| int (*do_set_data_bittiming)(struct net_device *); /* 312 8 */
| /* --- cacheline 5 boundary (320 bytes) --- */
| int (*do_set_mode)(struct net_device *, enum can_mode); /* 320 8 */
| int (*do_set_termination)(struct net_device *, u16); /* 328 8 */
| int (*do_get_state)(const struct net_device *, enum can_state *); /* 336 8 */
| int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 344 8 */
| unsigned int echo_skb_max; /* 352 4 */
|
| /* XXX 4 bytes hole, try to pack */
|
| struct sk_buff * * echo_skb; /* 360 8 */
|
| /* size: 368, cachelines: 6, members: 32 */
| /* sum members: 354, holes: 3, sum holes: 14 */
| /* paddings: 1, sum paddings: 4 */
| /* last cacheline: 48 bytes */
| };
After:
| $ pahole -C can_priv drivers/net/can/dev/dev.o
| struct can_priv {
| struct net_device * dev; /* 0 8 */
| struct can_device_stats can_stats; /* 8 24 */
| const struct can_bittiming_const * bittiming_const; /* 32 8 */
| const struct can_bittiming_const * data_bittiming_const; /* 40 8 */
| struct can_bittiming bittiming; /* 48 32 */
| /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
| struct can_bittiming data_bittiming; /* 80 32 */
| const struct can_tdc_const * tdc_const; /* 112 8 */
| struct can_tdc tdc; /* 120 12 */
| /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
| unsigned int bitrate_const_cnt; /* 132 4 */
| const u32 * bitrate_const; /* 136 8 */
| const u32 * data_bitrate_const; /* 144 8 */
| unsigned int data_bitrate_const_cnt; /* 152 4 */
| u32 bitrate_max; /* 156 4 */
| struct can_clock clock; /* 160 4 */
| unsigned int termination_const_cnt; /* 164 4 */
| const u16 * termination_const; /* 168 8 */
| u16 termination; /* 176 2 */
|
| /* XXX 6 bytes hole, try to pack */
|
| struct gpio_desc * termination_gpio; /* 184 8 */
| /* --- cacheline 3 boundary (192 bytes) --- */
| u16 termination_gpio_ohms[2]; /* 192 4 */
| unsigned int echo_skb_max; /* 196 4 */
| struct sk_buff * * echo_skb; /* 200 8 */
| enum can_state state; /* 208 4 */
| u32 ctrlmode; /* 212 4 */
| u32 ctrlmode_supported; /* 216 4 */
| int restart_ms; /* 220 4 */
| struct delayed_work restart_work; /* 224 88 */
|
| /* XXX last struct has 4 bytes of padding */
|
| /* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */
| int (*do_set_bittiming)(struct net_device *); /* 312 8 */
| /* --- cacheline 5 boundary (320 bytes) --- */
| int (*do_set_data_bittiming)(struct net_device *); /* 320 8 */
| int (*do_set_mode)(struct net_device *, enum can_mode); /* 328 8 */
| int (*do_set_termination)(struct net_device *, u16); /* 336 8 */
| int (*do_get_state)(const struct net_device *, enum can_state *); /* 344 8 */
| int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 352 8 */
|
| /* size: 360, cachelines: 6, members: 32 */
| /* sum members: 354, holes: 1, sum holes: 6 */
| /* paddings: 1, sum paddings: 4 */
| /* last cacheline: 40 bytes */
| };
Link: https://lore.kernel.org/all/20211213160226.56219-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Previous patch removed can_priv::ctrlmode_static to replace it with
can_get_static_ctrlmode().
A condition sine qua non for this to work is that the controller
static modes should never be set in can_priv::ctrlmode_supported
(c.f. the comment on can_priv::ctrlmode_supported which states that it
is for "options that can be *modified* by netlink"). Also, this
condition is already correctly fulfilled by all existing drivers
which rely on the ctrlmode_static feature.
Nonetheless, we added an extra safeguard in can_set_static_ctrlmode()
to return an error value and to warn the developer who would be
adventurous enough to set to static a given feature that is already
set to supported.
The drivers which rely on the static controller mode are then updated
to check the return value of can_set_static_ctrlmode().
Link: https://lore.kernel.org/all/20211213160226.56219-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The statically enabled features of a CAN controller can be retrieved
using below formula:
| u32 ctrlmode_static = priv->ctrlmode & ~priv->ctrlmode_supported;
As such, there is no need to store this information. This patch remove
the field ctrlmode_static of struct can_priv and provides, in
replacement, the inline function can_get_static_ctrlmode() which
returns the same value.
Link: https://lore.kernel.org/all/20211213160226.56219-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
As such, net_device_stats::tx_bytes should not be increased when
sending RTR frames.
The function can_get_echo_skb() already returns the correct length,
even for RTR frames (c.f. [1]). However, for historical reasons, the
drivers do not use can_get_echo_skb()'s return value and instead, most
of them store a temporary length (or dlc) in some local structure or
array. Using the return value of can_get_echo_skb() solves the
issue. After doing this, such length/dlc fields become unused and so
this patch does the adequate cleaning when needed.
This patch fixes all the CAN drivers.
Finally, can_get_echo_skb() is decorated with the __must_check
attribute in order to force future drivers to correctly use its return
value (else the compiler would emit a warning).
[1] commit ed3320cec279 ("can: dev: __can_get_echo_skb():
fix real payload length return value for RTR frames")
Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
[mkl: add conversion for grcan]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Unused now, so remove and drop any references to them.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Remove the remaining bits for the 'new' ata message handling.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Callers are already protected by ata_dev_print_info(), so no need
to have an additional configuration parameter here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Convert the sole caller to ata_dev_dbg() and remove the definition.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
All callsites have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The WARN level was always enabled, so drop ata_msg_warn().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Unused.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The one caller have been converted to dynamic debugging.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Unused.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Use standard pr_{debug,info,notice,warn,err} macros instead of the
hand-crafted printk helpers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add tracepoints for ATA error handling.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add tracepoints for the HSM state machine and drop DPRINTK calls
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Change the driver where WQ interrupt is requested only when wq is being
enabled. This new scheme set things up so that request_threaded_irq() is
only called when a kernel wq type is being enabled. This also sets up for
future interrupt request where different interrupt handler such as wq
occupancy interrupt can be setup instead of the wq completion interrupt.
Not calling request_irq() until the WQ actually needs an irq also prevents
wasting of CPU irq vectors on x86 systems, which is a limited resource.
idxd_flush_pending_descs() is moved to device.c since descriptor flushing
is now part of wq disable rather than shutdown().
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942149487.2412839.6691222855803875848.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The modepage argument is unused. Remove it.
Link: https://lore.kernel.org/r/20210929091744.706003-3-damien.lemoal@wdc.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PCC OpRegion provides a mechanism to communicate with the platform
directly from the AML. PCCT provides the list of PCC channel available
in the platform, a subset or all of them can be used in PCC Opregion.
This patch registers the PCC OpRegion handler before ACPI tables are
loaded. This relies on the special context data passed to identify and
set up the PCC channel before the OpRegion handler is executed for the
first time.
Typical PCC Opregion declaration looks like this:
OperationRegion (PFRM, PCC, 2, 0x74)
Field (PFRM, ByteAcc, NoLock, Preserve)
{
SIGN, 32,
FLGS, 32,
LEN, 32,
CMD, 32,
DATA, 800
}
It contains four named double words followed by 100 bytes of buffer
names DATA.
ASL can fill out the buffer something like:
/* Create global or local buffer */
Name (BUFF, Buffer (0x0C){})
/* Create double word fields over the buffer */
CreateDWordField (BUFF, 0x0, WD0)
CreateDWordField (BUFF, 0x04, WD1)
CreateDWordField (BUFF, 0x08, WD2)
/* Fill the named fields */
WD0 = 0x50434300
SIGN = BUFF
WD0 = 1
FLGS = BUFF
WD0 = 0x10
LEN = BUFF
/* Fill the payload in the DATA buffer */
WD0 = 0
WD1 = 0x08
WD2 = 0
DATA = BUFF
/* Write to CMD field to trigger handler */
WD0 = 0x4404
CMD = BUFF
This buffer is received by acpi_pcc_opregion_space_handler. This
handler will fetch the complete buffer via internal_pcc_buffer.
The setup handler will receive the special PCC context data which will
contain the PCC channel index which used to set up the channel. The
buffer pointer and length is saved in region context which is then used
in the handler.
(kernel test robot: Build failure with CONFIG_ACPI_DEBUGGER)
Link: https://lore.kernel.org/r/202201041539.feAV0l27-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Reimplement try_to_release_page() as a wrapper around
filemap_release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Reimplement read_cache_page() as a wrapper around read_cache_folio().
Saves over 400 bytes of text from do_read_cache_folio() which more
than makes up for the extra 100 bytes of text added to the various
wrapper functions.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Using the folio here avoids checking whether it's a tail page.
This patch mostly just enables some of the following patches.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
This function is now unused, so delete it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Reimplement __delete_from_page_cache() as a wrapper around
__filemap_remove_folio() and delete_from_page_cache() as a wrapper
around filemap_remove_folio(). Remove the EXPORT_SYMBOL as
delete_from_page_cache() was not used by any in-tree modules.
Convert page_cache_free_page() into filemap_free_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Pass the folio instead of a page. The page was already implicitly a
folio as it accessed page->mapping directly. Add the order of the folio
to the tracepoint, as this is important information. Also drop printing
the address of the struct page as the pfn provides better information
than the struct page address.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Replace unaccount_page_cache_page() with filemap_unaccount_folio().
The bug handling path could be a bit more robust (eg taking into account
the mapcounts of tail pages), but it's really never supposed to happen.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Convert all three callers of put_and_wait_on_page_locked() to
folio_put_wait_locked(). This shrinks the kernel overall by 19 bytes.
filemap_update_page() shrinks by 19 bytes while __migration_entry_wait()
is unchanged. folio_put_wait_locked() is 14 bytes smaller than
put_and_wait_on_page_locked(), but pmd_migration_entry_wait() grows by
14 bytes. It removes the assumption from pmd_migration_entry_wait()
that pages cannot be larger than a PMD (which is true today, but
may be interesting to explore in the future).
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Add a predicate to determine if the folio might be mapped by a PMD entry.
If CONFIG_TRANSPARENT_HUGEPAGE is disabled, we know it can't be, even
if it's large enough.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
