| Age | Commit message (Collapse) | Author |
|---|
|
The newly implemented fwnode_mdbiobus_register turned out to be
problematic - in case the fwnode_/of_/acpi_mdio are built as
modules, a dependency cycle can be observed during the depmod phase of
modules_install, eg.:
depmod: ERROR: Cycle detected: fwnode_mdio -> of_mdio -> fwnode_mdio
depmod: ERROR: Found 2 modules in dependency cycles!
OR:
depmod: ERROR: Cycle detected: acpi_mdio -> fwnode_mdio -> acpi_mdio
depmod: ERROR: Found 2 modules in dependency cycles!
A possible solution could be to rework fwnode_mdiobus_register,
so that to merge the contents of acpi_mdiobus_register and
of_mdiobus_register. However feasible, such change would
be very intrusive and affect huge amount of the of_mdiobus_register
users.
Since there are currently 2 users of ACPI and MDIO
(xgmac_mdio and mvmdio), withdraw the fwnode_mdbiobus_register
and roll back to a simple 'if' condition in affected drivers.
Fixes: 62a6ef6a996f ("net: mdiobus: Introduce fwnode_mdbiobus_register()")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge misc fixes from Andrew Morton:
"24 patches, based on 4a09d388f2ab382f217a764e6a152b3f614246f6.
Subsystems affected by this patch series: mm (thp, vmalloc, hugetlb,
memory-failure, and pagealloc), nilfs2, kthread, MAINTAINERS, and
mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
mailmap: add Marek's other e-mail address and identity without diacritics
MAINTAINERS: fix Marek's identity again
mm/page_alloc: do bulk array bounds check after checking populated elements
mm/page_alloc: __alloc_pages_bulk(): do bounds check before accessing array
mm/hwpoison: do not lock page again when me_huge_page() successfully recovers
mm,hwpoison: return -EHWPOISON to denote that the page has already been poisoned
mm/memory-failure: use a mutex to avoid memory_failure() races
mm, futex: fix shared futex pgoff on shmem huge page
kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
kthread_worker: split code for canceling the delayed work timer
mm/vmalloc: unbreak kasan vmalloc support
KVM: s390: prepare for hugepage vmalloc
mm/vmalloc: add vmalloc_no_huge
nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
mm/thp: another PVMW_SYNC fix in page_vma_mapped_walk()
mm/thp: fix page_vma_mapped_walk() if THP mapped by ptes
mm: page_vma_mapped_walk(): get vma_address_end() earlier
mm: page_vma_mapped_walk(): use goto instead of while (1)
mm: page_vma_mapped_walk(): add a level of indentation
mm: page_vma_mapped_walk(): crossing page table boundary
...
|
|
The goal is to keep the mark during a bpf_redirect(), like it is done for
legacy encapsulation / decapsulation, when there is no x-netns.
This was initially done in commit 213dd74aee76 ("skbuff: Do not scrub skb
mark within the same name space").
When the call to skb_scrub_packet() was added in dev_forward_skb() (commit
8b27f27797ca ("skb: allow skb_scrub_packet() to be used by tunnels")), the
second argument (xnet) was set to true to force a call to skb_orphan(). At
this time, the mark was always cleanned up by skb_scrub_packet(), whatever
xnet value was.
This call to skb_orphan() was removed later in commit
9c4c325252c5 ("skbuff: preserve sock reference when scrubbing the skb.").
But this 'true' stayed here without any real reason.
Let's correctly set xnet in ____dev_forward_skb(), this function has access
to the previous interface and to the new interface.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag. It also writes back to that
structure which justifies _IOC_READ flag.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"Two regression fixes from the merge window: one in the auth code
affecting old clusters and one in the filesystem for proper
propagation of MDS request errors.
Also included a locking fix for async creates, marked for stable"
* tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client:
libceph: set global_id as soon as we get an auth ticket
libceph: don't pass result into ac->ops->handle_reply()
ceph: fix error handling in ceph_atomic_open and ceph_lookup
ceph: must hold snap_rwsem when filling inode for async create
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
|
|
|
|
Add a hid_hw_may_wakeup() function, which is the equivalent of
device_may_wakeup() for hid devices.
In most cases this just returns device_may_wakeup(hdev->dev.parent), but for
some ll-drivers this is not correct. E.g. usb_hid_driver instantiated hid
devices have their parent set to the usb-interface to which the usb_hid_driver
is bound, but the power/wakeup* sysfs attributes are part of the usb-device,
which is the usb-interface's parent.
For these special cases a new may_wakeup callback is added to
hid_ll_driver, so that ll-drivers can override the default behavior.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some controllers like qcom geni need the parent device to be used for
dma mapping, so add a dma_map_dev field and let drivers fill this to be
used as mapping device
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210625052213.32260-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If more than one futex is placed on a shmem huge page, it can happen
that waking the second wakes the first instead, and leaves the second
waiting: the key's shared.pgoff is wrong.
When 3.11 commit 13d60f4b6ab5 ("futex: Take hugepages into account when
generating futex_key"), the only shared huge pages came from hugetlbfs,
and the code added to deal with its exceptional page->index was put into
hugetlb source. Then that was missed when 4.8 added shmem huge pages.
page_to_pgoff() is what others use for this nowadays: except that, as
currently written, it gives the right answer on hugetlbfs head, but
nonsense on hugetlbfs tails. Fix that by calling hugetlbfs-specific
hugetlb_basepage_index() on PageHuge tails as well as on head.
Yes, it's unconventional to declare hugetlb_basepage_index() there in
pagemap.h, rather than in hugetlb.h; but I do not expect anything but
page_to_pgoff() ever to need it.
[akpm@linux-foundation.org: give hugetlb_basepage_index() prototype the correct scope]
Link: https://lkml.kernel.org/r/b17d946b-d09-326e-b42a-52884c36df32@google.com
Fixes: 800d8c63b2e9 ("shmem: add huge pages support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Zhang Yi <wetpzy@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: add vmalloc_no_huge and use it", v4.
Add vmalloc_no_huge() and export it, so modules can allocate memory with
small pages.
Use the newly added vmalloc_no_huge() in KVM on s390 to get around a
hardware limitation.
This patch (of 2):
Commit 121e6f3258fe3 ("mm/vmalloc: hugepage vmalloc mappings") added
support for hugepage vmalloc mappings, it also added the flag
VM_NO_HUGE_VMAP for __vmalloc_node_range to request the allocation to be
performed with 0-order non-huge pages.
This flag is not accessible when calling vmalloc, the only option is to
call directly __vmalloc_node_range, which is not exported.
This means that a module can't vmalloc memory with small pages.
Case in point: KVM on s390x needs to vmalloc a large area, and it needs
to be mapped with non-huge pages, because of a hardware limitation.
This patch adds the function vmalloc_no_huge, which works like vmalloc,
but it is guaranteed to always back the mapping using small pages. This
new function is exported, therefore it is usable by modules.
[akpm@linux-foundation.org: whitespace fixes, per Christoph]
Link: https://lkml.kernel.org/r/20210614132357.10202-1-imbrenda@linux.ibm.com
Link: https://lkml.kernel.org/r/20210614132357.10202-2-imbrenda@linux.ibm.com
Fixes: 121e6f3258fe3 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lockdep complains about lock inversion between ioc->lock and bfqd->lock:
bfqd -> ioc:
put_io_context+0x33/0x90 -> ioc->lock grabbed
blk_mq_free_request+0x51/0x140
blk_put_request+0xe/0x10
blk_attempt_req_merge+0x1d/0x30
elv_attempt_insert_merge+0x56/0xa0
blk_mq_sched_try_insert_merge+0x4b/0x60
bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed
blk_mq_sched_insert_requests+0xd6/0x2b0
blk_mq_flush_plug_list+0x154/0x280
blk_finish_plug+0x40/0x60
ext4_writepages+0x696/0x1320
do_writepages+0x1c/0x80
__filemap_fdatawrite_range+0xd7/0x120
sync_file_range+0xac/0xf0
ioc->bfqd:
bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed
put_io_context_active+0x78/0xb0 -> ioc->lock grabbed
exit_io_context+0x48/0x50
do_exit+0x7e9/0xdd0
do_group_exit+0x54/0xc0
To avoid this inversion we change blk_mq_sched_try_insert_merge() to not
free the merged request but rather leave that upto the caller similarly
to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure
to free all the merged requests after dropping bfqd->lock.
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a fallback mechanism to the in-kernel instruction emulator that
allows userspace the opportunity to process an instruction the emulator
was unable to. When the in-kernel instruction emulator fails to process
an instruction it will either inject a #UD into the guest or exit to
userspace with exit reason KVM_INTERNAL_ERROR. This is because it does
not know how to proceed in an appropriate manner. This feature lets
userspace get involved to see if it can figure out a better path
forward.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210510144834.658457-2-aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To remove code duplication, use the binary stats descriptors in the
implementation of the debugfs interface for statistics. This unifies
the definition of statistics for the binary and debugfs interfaces.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-8-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a VCPU ioctl to get a statistics file descriptor by which a read
functionality is provided for userspace to read out VCPU stats header,
descriptors and data.
Define VCPU statistics descriptors and header for all architectures.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-5-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a VM ioctl to get a statistics file descriptor by which a read
functionality is provided for userspace to read out VM stats header,
descriptors and data.
Define VM statistics descriptors and header for all architectures.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-4-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently the PLPMUTD probe will stop for a long period (interval * 30)
after it enters search complete state. If there's a pmtu change on the
route path, it takes a long time to be aware if the ICMP TooBig packet
is lost or filtered.
As it says in rfc8899#section-4.3:
"A DPLPMTUD method MUST NOT rely solely on this method."
(ICMP PTB message).
This patch is to enable the other method for search complete state:
"A PL can use the DPLPMTUD probing mechanism to periodically
generate probe packets of the size of the current PLPMTU."
With this patch, the probe will continue with the current pmtu every
'interval' until the PMTU_RAISE_TIMER 'timeout', which we implement
by adding raise_count to raise the probe size when it counts to 30
and removing the SCTP_PL_COMPLETE check for PMTU_RAISE_TIMER.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The key length used when offloading macsec to Ethernet or PHY drivers
was set to MACSEC_KEYID_LEN (16), which is an issue as:
- This was never meant to be the key length.
- The key length can be > 16.
Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length
accepted in uAPI) and secy->key_len to copy it.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Reported-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 61ca49a9105f ("libceph: don't set global_id until we get an
auth ticket") delayed the setting of global_id too much. It is set
only after all tickets are received, but in pre-nautilus clusters an
auth ticket and the service tickets are obtained in separate steps
(for a total of three MAuth replies). When the service tickets are
requested, global_id is used to build an authorizer; if global_id is
still 0 we never get them and fail to establish the session.
Moving the setting of global_id into protocol implementations. This
way global_id can be set exactly when an auth ticket is received, not
sooner nor later.
Fixes: 61ca49a9105f ("libceph: don't set global_id until we get an auth ticket")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
There is no result to pass in msgr2 case because authentication
failures are reported through auth_bad_method frame and in MAuth
case an error is returned immediately.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
The fallback case of fwnode_mdbiobus_register()
(relevant for !CONFIG_FWNODE_MDIO) was defined with wrong
argument name, causing a compilation error. Fix that.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.
Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.
Thus, this is following up on Eric's commit 3d368ab87cf6 ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE. This is also in line in how we retrieve socket cookie
via SO_COOKIE.
[1] https://kind.sigs.k8s.io/
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bdev_disk_changed can only operate on whole devices. Make that clear
by passing a gendisk instead of the struct block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move bdev_disk_changed to block/partitions/core.c, together with the
rest of the partition scanning code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210624123240.441814-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
XDP_REDIRECT works by a three-step process: the bpf_redirect() and
bpf_redirect_map() helpers will lookup the target of the redirect and store
it (along with some other metadata) in a per-CPU struct bpf_redirect_info.
Next, when the program returns the XDP_REDIRECT return code, the driver
will call xdp_do_redirect() which will use the information thus stored to
actually enqueue the frame into a bulk queue structure (that differs
slightly by map type, but shares the same principle). Finally, before
exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will
flush all the different bulk queues, thus completing the redirect.
Pointers to the map entries will be kept around for this whole sequence of
steps, protected by RCU. However, there is no top-level rcu_read_lock() in
the core code; instead drivers add their own rcu_read_lock() around the XDP
portions of the code, but somewhat inconsistently as Martin discovered[0].
However, things still work because everything happens inside a single NAPI
poll sequence, which means it's between a pair of calls to
local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could
document this intention by using rcu_dereference_check() with
rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and
lockdep to verify that everything is done correctly.
This patch does just that: we add an __rcu annotation to the map entry
pointers and remove the various comments explaining the NAPI poll assurance
strewn through devmap.c in favour of a longer explanation in filter.c. The
goal is to have one coherent documentation of the entire flow, and rely on
the RCU annotations as a "standard" way of communicating the flow in the
map code (which can additionally be understood by sparse and lockdep).
The RCU annotation replacements result in a fairly straight-forward
replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE()
becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the
proper constructs to cast the pointer back and forth between __rcu and
__kernel address space (for the benefit of sparse). The one complication is
that xskmap has a few constructions where double-pointers are passed back
and forth; these simply all gain __rcu annotations, and only the final
reference/dereference to the inner-most pointer gets changed.
With this, everything can be run through sparse without eliciting
complaints, and lockdep can verify correctness even without the use of
rcu_read_lock() in the drivers. Subsequent patches will clean these up from
the drivers.
[0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/
[1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
|
|
The xchg() and cmpxchg() functions are sometimes used to carry out RCU
updates. Unfortunately, this can result in sparse warnings for both
the old-value and new-value arguments, as well as for the return value.
The arguments can be dealt with using RCU_INITIALIZER():
old_p = xchg(&p, RCU_INITIALIZER(new_p));
But a sparse warning still remains due to assigning the __rcu pointer
returned from xchg to the (most likely) non-__rcu pointer old_p.
This commit therefore provides an unrcu_pointer() macro that strips
the __rcu. This macro can be used as follows:
old_p = unrcu_pointer(xchg(&p, RCU_INITIALIZER(new_p)));
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-2-toke@redhat.com
|
|
This commit defines the API for userspace and prepare the common
functionalities to support per VM/VCPU binary stats data readings.
The KVM stats now is only accessible by debugfs, which has some
shortcomings this change series are supposed to fix:
1. The current debugfs stats solution in KVM could be disabled
when kernel Lockdown mode is enabled, which is a potential
rick for production.
2. The current debugfs stats solution in KVM is organized as "one
stats per file", it is good for debugging, but not efficient
for production.
3. The stats read/clear in current debugfs solution in KVM are
protected by the global kvm_lock.
Besides that, there are some other benefits with this change:
1. All KVM VM/VCPU stats can be read out in a bulk by one copy
to userspace.
2. A schema is used to describe KVM statistics. From userspace's
perspective, the KVM statistics are self-describing.
3. With the fd-based solution, a separate telemetry would be able
to read KVM stats in a less privileged environment.
4. After the initial setup by reading in stats descriptors, a
telemetry only needs to read the stats data itself, no more
parsing or setup is needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com> #arm64
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-3-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generic KVM stats are those collected in architecture independent code
or those supported by all architectures; put all generic statistics in
a separate structure. This ensures that they are defined the same way
in the statistics API which is being added, removing duplication among
different architectures in the declaration of the descriptors.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-2-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Map them to KEY_MACRO# event codes.
These buttons are defined by HID as follows:
"The user defines the function of these buttons to control software applications or GUI objects."
This matches the semantics of the KEY_MACRO# input event codes that Linux supports.
Also add support for HID "Named Array" collections.
Also add hid-debug support for KEY_MACRO#.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add support for versions v1.2 and 1.3 of the SMC calling convention.
* for-next/smccc:
arm64: smccc: Support SMCCC v1.3 SVE register saving hint
arm64: smccc: Add support for SMCCCv1.2 extended input/output registers
|
|
PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
* for-next/perf: (36 commits)
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: perf: Simplify EVENT ATTR macro in perf_event.c
drivers/perf: Simplify EVENT ATTR macro in fsl_imx8_ddr_perf.c
drivers/perf: Simplify EVENT ATTR macro in xgene_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l3_pmu.c
drivers/perf: Simplify EVENT ATTR macro in qcom_l2_pmu.c
drivers/perf: Simplify EVENT ATTR macro in SMMU PMU driver
perf: Add EVENT_ATTR_ID to simplify event attributes
perf/smmuv3: Don't trample existing events with global filter
perf/hisi: Constify static attribute_group structs
perf: qcom: Remove redundant dev_err call in qcom_l3_cache_pmu_probe()
drivers/perf: hisi: Fix data source control
arm64: perf: Add more support on caps under sysfs
perf: qcom_l2_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
arm_pmu: move to use request_irq by IRQF_NO_AUTOEN flag
perf: arm_spe: use DEVICE_ATTR_RO macro
perf: xgene_pmu: use DEVICE_ATTR_RO macro
perf: qcom: use DEVICE_ATTR_RO macro
perf: arm_pmu: use DEVICE_ATTR_RO macro
...
|
|
Smatch static checker warns that "mdev" can be null:
sound/usb/media.c:287 snd_media_device_create()
warn: 'mdev' can also be NULL
If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.
The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.
sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o
select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
(MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.
#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.
Fix the problem requires two changes:
1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
the check unchanged to be consistent with drivers/media/Makefile.
2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
in mc-objs when CONFIG_USB is enabled.
Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Introducing new, complementary to SD_ASYM_CPUCAPACITY, sched_domain
topology flag, to distinguish between shed_domains where any CPU
capacity asymmetry is detected (SD_ASYM_CPUCAPACITY) and ones where
a full set of CPU capacities is visible to all domain members
(SD_ASYM_CPUCAPACITY_FULL).
With the distinction between full and partial CPU capacity asymmetry,
brought in by the newly introduced flag, the scope of the original
SD_ASYM_CPUCAPACITY flag gets shifted, still maintaining the existing
behaviour when one is detected on a given sched domain, allowing
misfit migrations within sched domains that do not observe full range
of CPU capacities but still do have members with different capacity
values. It loses though it's meaning when it comes to the lowest CPU
asymmetry sched_domain level per-cpu pointer, which is to be now
denoted by SD_ASYM_CPUCAPACITY_FULL flag.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210603140627.8409-2-beata.michalska@arm.com
|
|
The definitions for crypto_attr-related types and enums are not
needed by most Crypto API users. This patch moves them out of
crypto.h and into algapi.h/internal.h depending on the extent of
their use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-23
The following pull-request contains BPF updates for your *net* tree.
We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).
Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fbc4cb ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa6f70 ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.
The main changes are:
1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.
2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.
3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.
4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.
5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.
6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit d26b698dd3cd ("net/tls: add skeleton of MIB statistics")
introduced __TLS_DEC_STATS(), but it is not used and __SNMP_DEC_STATS() is
not defined also. Let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-net-next-2021-06-22
1) Various minor cleanups and fixes from net-next branch
2) Optimize mlx5 feature check on tx and
a fix to allow Vxlan with Ipsec offloads
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-06-23
1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
From Sabrina Dubroca
2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
for the PREEMPT_RT case. From Varad Gautam.
3) Remove a repeated declaration of xfrm_parse_spi.
From Shaokun Zhang.
4) IPv4 beet mode can't handle fragments, but IPv6 does.
commit 68dc022d04eb ("xfrm: BEET mode doesn't support
fragments for inner packets") handled IPv4 and IPv6
the same way. Relax the check for IPv6 because fragments
are possible here. From Xin Long.
5) Memory allocation failures are not reported for
XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
Fix this by moving both cases in front of the function.
6) Fix a missing initialization in the xfrm offload fallback
fail case for bonding devices. From Ayush Sawal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Skip non-SCTP packets in the new SCTP chunk support for nft_exthdr,
from Phil Sutter.
2) Simplify TCP option sanity check for TCP packets, also from Phil.
3) Add a new expression to store when the rule has been used last time.
4) Pass the hook state object to log function, from Florian Westphal.
5) Document the new sysctl knobs to tune the flowtable timeouts,
from Oz Shlomo.
6) Fix snprintf error check in the new nfnetlink_hook infrastructure,
from Dan Carpenter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As MISSED and DRAINING state are used to indicate a non-empty
qdisc, qdisc->empty is not longer needed, so remove it.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
flag set, but queue discipline by-pass does not work for lockless
qdisc because skb is always enqueued to qdisc even when the qdisc
is empty, see __dev_xmit_skb().
This patch calls sch_direct_xmit() to transmit the skb directly
to the driver for empty lockless qdisc, which aviod enqueuing
and dequeuing operation.
As qdisc->empty is not reliable to indicate a empty qdisc because
there is a time window between enqueuing and setting qdisc->empty.
So we use the MISSED state added in commit a90c57f2cedd ("net:
sched: fix packet stuck problem for lockless qdisc"), which
indicate there is lock contention, suggesting that it is better
not to do the qdisc bypass in order to avoid packet out of order
problem.
In order to make MISSED state reliable to indicate a empty qdisc,
we need to ensure that testing and clearing of MISSED state is
within the protection of qdisc->seqlock, only setting MISSED state
can be done without the protection of qdisc->seqlock. A MISSED
state testing is added without the protection of qdisc->seqlock to
aviod doing unnecessary spin_trylock() for contention case.
As the enqueuing is not within the protection of qdisc->seqlock,
there is still a potential data race as mentioned by Jakub [1]:
thread1 thread2 thread3
qdisc_run_begin() # true
qdisc_run_begin(q)
set(MISSED)
pfifo_fast_dequeue
clear(MISSED)
# recheck the queue
qdisc_run_end()
enqueue skb1
qdisc empty # true
qdisc_run_begin() # true
sch_direct_xmit() # skb2
qdisc_run_begin()
set(MISSED)
When above happens, skb1 enqueued by thread2 is transmited after
skb2 is transmited by thread3 because MISSED state setting and
enqueuing is not under the qdisc->seqlock. If qdisc bypass is
disabled, skb1 has better chance to be transmited quicker than
skb2.
This patch does not take care of the above data race, because we
view this as similar as below:
Even at the same time CPU1 and CPU2 write the skb to two socket
which both heading to the same qdisc, there is no guarantee that
which skb will hit the qdisc first, because there is a lot of
factor like interrupt/softirq/cache miss/scheduling afffecting
that.
There are below cases that need special handling:
1. When MISSED state is cleared before another round of dequeuing
in pfifo_fast_dequeue(), and __qdisc_run() might not be able to
dequeue all skb in one round and call __netif_schedule(), which
might result in a non-empty qdisc without MISSED set. In order
to avoid this, the MISSED state is set for lockless qdisc and
__netif_schedule() will be called at the end of qdisc_run_end.
2. The MISSED state also need to be set for lockless qdisc instead
of calling __netif_schedule() directly when requeuing a skb for
a similar reason.
3. For netdev queue stopped case, the MISSED case need clearing
while the netdev queue is stopped, otherwise there may be
unnecessary __netif_schedule() calling. So a new DRAINING state
is added to indicate this case, which also indicate a non-empty
qdisc.
4. As there is already netif_xmit_frozen_or_stopped() checking in
dequeue_skb() and sch_direct_xmit(), which are both within the
protection of qdisc->seqlock, but the same checking in
__dev_xmit_skb() is without the protection, which might cause
empty indication of a lockless qdisc to be not reliable. So
remove the checking in __dev_xmit_skb(), and the checking in
the protection of qdisc->seqlock seems enough to avoid the cpu
consumption problem for netdev queue stopped case.
1. https://lkml.org/lkml/2021/5/29/215
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qdisc->running seqcount operation is mainly used to do heuristic
locking on q->busylock for locked qdisc, see qdisc_is_running()
and __dev_xmit_skb().
So avoid doing seqcount operation for qdisc with TCQ_F_NOLOCK
flag.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add wiphy_info_once() helper that prints info message only once.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511211549.30571-1-digetx@gmail.com
|
|
This switches the airtime scheduler in mac80211 to use a virtual
time-based scheduler instead of the round-robin scheduler used before.
This has a couple of advantages:
- No need to sync up the round-robin scheduler in firmware/hardware with
the round-robin airtime scheduler.
- If several stations are eligible for transmission we can schedule both
of them; no need to hard-block the scheduling rotation until the head
of the queue has used up its quantum.
- The check of whether a station is eligible for transmission becomes
simpler (in ieee80211_txq_may_transmit()).
The drawback is that scheduling becomes slightly more expensive, as we
need to maintain an rbtree of TXQs sorted by virtual time. This means
that ieee80211_register_airtime() becomes O(logN) in the number of
currently scheduled TXQs because it can change the order of the
scheduled stations. We mitigate this overhead by only resorting when a
station changes position in the tree, and hopefully N rarely grows too
big (it's only TXQs currently backlogged, not all associated stations),
so it shouldn't be too big of an issue.
To prevent divisions in the fast path, we maintain both station sums and
pre-computed reciprocals of the sums. This turns the fast-path operation
into a multiplication, with divisions only happening as the number of
active stations change (to re-compute the current sum of all active
station weights). To prevent this re-computation of the reciprocal from
happening too frequently, we use a time-based notion of station
activity, instead of updating the weight every time a station gets
scheduled or de-scheduled. As queues can oscillate between empty and
occupied quite frequently, this can significantly cut down on the number
of re-computations. It also has the added benefit of making the station
airtime calculation independent on whether the queue happened to have
drained at the time an airtime value was accounted.
Co-developed-by: Yibo Zhao <yiboz@codeaurora.org>
Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210623134755.235545-1-toke@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into HEAD
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
|
|
We have mgd_prepare_tx(), but sometimes drivers may want/need
to take action when the exchange finishes, whether successfully
or not.
Add a notification to the driver on completion, i.e. call the
new method mgd_complete_tx().
To unify the two scenarios, and to add more information, make
both of them take a struct that has the duration (prepare only),
subtype (both) and success (complete only).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There may be cases where vendor-specific elements need to be
used over the air. Rather than have driver or firmware add
them and possibly cause problems that way, add them to the
iftype-data band capabilities. This way we can advertise to
userspace first, and use them in mac80211 next.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.e8c4f0347276.Iee5964682b3e9ec51fc1cd57a7c62383eaf6ddd7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This helper function checks if there are any usable channels on
any of the given bands with the given properties (as expressed
by disallowed channel flags).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.2b613addaa85.Idaf8b859089490537878a7de5c7453a873a3f638@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
