| Age | Commit message (Collapse) | Author |
|---|
|
Back-merge from for-linus just to make the further development easier.
|
|
No longer used
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No longer used
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No longer used
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No longer needed
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No longer needed
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst
is not returned on the first FIB lookup. Instead, the dst on the
skb is switched at the beginning of the IPv6 output processing to
send the packet to the VRF driver on xmit.
Link scope addresses (linklocal and multicast) need special handling:
specifically the oif the flow struct can not be changed because we
want the lookup tied to the enslaved interface. ie., the source address
and the returned route MUST point to the interface scope passed in.
Convert the existing vrf_get_rt6_dst to handle only link scope addresses.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow an L3 master device to act as the loopback for that L3 domain.
For IPv4 the device can also have the address 127.0.0.1.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the infrastructure to the output path to pass an skb
to an l3mdev device if it has a hook registered. This is the Tx parallel
to l3mdev_ip{6}_rcv in the receive path and is the basis for removing
the existing hook that returns the vrf dst on the fib lookup.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add l3mdev hook to set FLOWI_FLAG_SKIP_NH_OIF flag and update oif/iif
in flow struct if its oif or iif points to a device enslaved to an L3
Master device. Only 1 needs to be converted to match the l3mdev FIB
rule. This moves the flow adjustment for l3mdev to a single point
catching all lookups. It is redundant for existing hooks (those are
removed in later patches) but is needed for missed lookups such as
PMTU updates.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These functions are used by other code misc-next tree.
This reverts commit 30d1de08c87ddde6f73936c3350e7e153988fe02.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add attach/detach callbacks to interface API.
This is crucial for implementing seamless reset flow which releases the
hardware and it's resources upon detach while keeping software
structures and state (e.g netdev) then reset and reallocate the hardware
needed resources upon attach.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the code and makes it look modular and symmetric.
Split sriov enable/disable to two levels: device level and pci level.
When user enable/disable sriov (via sriov_configure driver callback) we
will enable/disable both device and pci sriov.
When driver load/unload we will enable/disable (on demand) only device
sriov while keeping the PCI sriov enabled for next driver load.
On internal/pci error, VFs will be kept enabled on PCI and the reset
is done only in device level.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The action will release the metadata created by the tunnel device
(decap), or set the metadata with the specified values for encap
operation.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0' (after metadata is released):
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action tunnel_key release \
action mirred egress redirect dev vnet0
The action tunnel_key, will be introduced in the next patch in this
series.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract __ip_tun_set_dst() and __ipv6_tun_set_dst() out of
ip_tun_rx_dst() and ipv6_tun_rx_dst(), to be used without supplying an
skb.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add utility functions to convert a 32 bits key into a 64 bits tunnel and
vice versa.
These functions will be used instead of cloning code in GRE and VXLAN,
and in tc act_iptunnel which will be introduced in a following patch in
this patchset.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull fscrypto fixes fromTed Ts'o:
"Fix some brown-paper-bag bugs for fscrypto, including one one which
allows a malicious user to set an encryption policy on an empty
directory which they do not own"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fscrypto: require write access to mount to set encryption policy
fscrypto: only allow setting encryption policy on directories
fscrypto: add authorization check for setting encryption policy
|
|
This adds a helper function to the IIO trigger framework:
iio_trigger_using_own(): for an IIO device, this tells
whether the device is using itself as a trigger.
This is true if the indio device:
(A) supplies a trigger and
(B) has assigned its own buffer poll function to use this
trigger.
This helper function is good when constructing triggered,
buffered drivers that can either use its own hardware *OR*
an external trigger such as a HRTimer or even the trigger from
a totally different sensor.
Under such circumstances it is important to know for example
if the timestamp from the same trigger hardware should be used
when populating the buffer: if iio_trigger_using_own() is true,
we can use this timestamp, else we need to pick a unique
timestamp directly in the trigger handler.
For this to work of course IIO devices registering hardware
triggers must follow the convention to set the parent device
properly, as as well as setting the parent of the IIO device
itself.
When a new poll function is attached, we check if the parent
device of the IIO of the poll function is the same as the
parent device of the trigger and in that case we conclude that
the hardware is using itself as trigger.
Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The only use for this is for solving a hardware design problem in
usb of Rockchip RK3288.
Signed-off-by: Randy Li <ayaka@soulik.info>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
EXTCON_PROP_USB_SS (SuperSpeed)[1] is necessary to distinguish
between USB/USB2 and USB3 connections on USB Type-C cables.
[1] https://en.wikipedia.org/wiki/USB#Overview
Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.
[1] https://en.wikipedia.org/wiki/Wireless_power_transfer
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.
[1] https://en.wikipedia.org/wiki/Head-mounted_display
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.
The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().
The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
synchronize the information between extcon provider driver
and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.
For example,
case 1, change the state of external connector and synchronized the data.
extcon_set_state_sync(edev, EXTCON_USB, 1);
case 2, change both the state and property of external connector
and synchronized the data.
extcon_set_state(edev, EXTCON_USB, 1);
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
extcon_sync(edev, EXTCON_USB);
case 3, change the property of external connector and synchronized the data.
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
extcon_sync(edev, EXTCON_USB);
case 4, change the property of external connector and synchronized the data.
extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
pattern
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()
But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.
Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.
- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]
Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value prop_val)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB : USB connector
- EXTCON_TYPE_CHG : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector
Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
|
|
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.
Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This commit introduces the clocks found in the Allwinner A33 CCU.
Since this SoC is very similar to the A23, and we share a significant share
of the DTSI, the clock IDs that are going to be used will also be shared
with the A23, hence the name of the various header files.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem. This was handled correctly by f2fs but not by ext4. Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This work adds BPF_CALL_<n>() macros and converts all the eBPF helper functions
to use them, in a similar fashion like we do with SYSCALL_DEFINE<n>() macros
that are used today. Motivation for this is to hide all the register handling
and all necessary casts from the user, so that it is done automatically in the
background when adding a BPF_CALL_<n>() call.
This makes current helpers easier to review, eases to write future helpers,
avoids getting the casting mess wrong, and allows for extending all helpers at
once (f.e. build time checks, etc). It also helps detecting more easily in
code reviews that unused registers are not instrumented in the code by accident,
breaking compatibility with existing programs.
BPF_CALL_<n>() internals are quite similar to SYSCALL_DEFINE<n>() ones with some
fundamental differences, for example, for generating the actual helper function
that carries all u64 regs, we need to fill unused regs, so that we always end up
with 5 u64 regs as an argument.
I reviewed several 0-5 generated BPF_CALL_<n>() variants of the .i results and
they look all as expected. No sparse issue spotted. We let this also sit for a
few days with Fengguang's kbuild test robot, and there were no issues seen. On
s390, it barked on the "uses dynamic stack allocation" notice, which is an old
one from bpf_perf_event_output{,_tp}() reappearing here due to the conversion
to the call wrapper, just telling that the perf raw record/frag sits on stack
(gcc with s390's -mwarn-dynamicstack), but that's all. Did various runtime tests
and they were fine as well. All eBPF helpers are now converted to use these
macros, getting rid of a good chunk of all the raw castings.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add BPF_SIZEOF() and BPF_FIELD_SIZEOF() macros to improve the code a bit
which otherwise often result in overly long bytes_to_bpf_size(sizeof())
and bytes_to_bpf_size(FIELD_SIZEOF()) lines. So place them into a macro
helper instead. Moreover, we currently have a BUILD_BUG_ON(BPF_FIELD_SIZEOF())
check in convert_bpf_extensions(), but we should rather make that generic
as well and add a BUILD_BUG_ON() test in all BPF_SIZEOF()/BPF_FIELD_SIZEOF()
users to detect any rewriter size issues at compile time. Note, there are
currently none, but we want to assert that it stays this way.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Rewrite data and ack handling
This patch set constitutes the main portion of the AF_RXRPC rewrite. It
consists of five fix/helper patches:
(1) Fix ASSERTCMP's and ASSERTIFCMP's handling of signed values.
(2) Update some protocol definitions slightly.
(3) Use of an hlist for RCU purposes.
(4) Removal of per-call sk_buff accounting (not really needed when skbs
aren't being queued on the main queue).
(5) Addition of a tracepoint to log incoming packets in the data_ready
callback and to log the end of the data_ready callback.
And then there are two patches that form the main part:
(6) Preallocation of resources for incoming calls so that in patch (7) the
data_ready handler can be made to fully instantiate an incoming call
and make it live. This extends through into AFS so that AFS can
preallocate its own incoming call resources.
The preallocation size is capped at the listen() backlog setting - and
that is capped at a sysctl limit which can be set between 4 and 32.
The preallocation is (re)charged either by accepting/rejecting pending
calls or, in the case of AFS, manually. If insufficient preallocation
resources exist, a BUSY packet will be transmitted.
The advantage of using this preallocation is that once a call is set
up in the data_ready handler, DATA packets can be queued on it
immediately rather than the DATA packets being queued for a background
work item to do all the allocation and then try and sort out the DATA
packets whilst other DATA packets may still be coming in and going
either to the background thread or the new call.
(7) Rewrite the handling of DATA, ACK and ABORT packets.
In the receive phase, DATA packets are now held in per-call circular
buffers with deduplication, out of sequence detection and suchlike
being done in data_ready. Since there is only one producer and only
once consumer, no locks need be used on the receive queue.
Received ACK and ABORT packets are now parsed and discarded in
data_ready to recycle resources as fast as possible.
sk_buffs are no longer pulled, trimmed or cloned, but rather the
offset and size of the content is tracked. This particularly affects
jumbo DATA packets which need insertion into the receive buffer in
multiple places. Annotations are kept to track which bit is which.
Packets are no longer queued on the socket receive queue; rather,
calls are queued. Dummy packets to convey events therefore no longer
need to be invented and metadata packets can be discarded as soon as
parsed rather then being pushed onto the socket receive queue to
indicate terminal events.
The preallocation facility added in (6) is now used to set up incoming
calls with very little locking required and no calls to the allocator
in data_ready.
Decryption and verification is now handled in recvmsg() rather than in
a background thread. This allows for the future possibility of
decrypting directly into the user buffer.
With this patch, the code is a lot simpler and most of the mass of
call event and state wangling code in call_event.c is gone.
With this, the majority of the AF_RXRPC rewrite is complete. However,
there are still things to be done, including:
(*) Limit the number of active service calls to prevent an attacker from
filling up a server's memory.
(*) Limit the number of calls on the rebuff-with-BUSY queue.
(*) Transmit delayed/deferred ACKs from recvmsg() if possible, rather than
punting to the background thread. Ideally, the background thread
shouldn't run at all, but data_ready can't call kernel_sendmsg() and
we can't rely on recvmsg() attending to the call in a timely fashion.
(*) Prevent the call at the front of the socket queue from hogging
recvmsg()'s attention if there's a sufficiently continuous supply of
data.
(*) Distribute ICMP errors by connection rather than by call. Possibly
parse the ICMP packet to try and pin down the exact connection and
call.
(*) Encrypt/decrypt directly between user buffers and socket buffers where
possible.
(*) IPv6.
(*) Service ID upgrade. This is a facility whereby a special flag bit is
set in the DATA packet header when making a call that tells the server
that it is allowed to change the service ID to an upgraded one and
reply with an equivalent call from the upgraded service.
This is used, for example, to override certain AFS calls so that IPv6
addresses can be returned.
(*) Allow userspace to preallocate call user IDs for incoming calls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACPICA commit 3c8c04c2e8a371018b3a29f5cfe27a241caea48d
Version 20160831
Link: https://github.com/acpica/acpica/commit/3c8c04c2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
for table loading
ACPICA commit 0e24fb67cde08d7df7671d7d7b183490dc79707e
The MLC (Module Level Code) is an ACPICA terminology describing the AML
code out of any control method, its support is an indication of the
interpreter behavior during the table loading.
The original implementation of MLC in ACPICA had several issues:
1. Out of any control method, besides of the object creating opcodes, only
the code blocks wrapped by "If/Else/While" opcodes were supported.
2. The supported MLC code blocks were executed after loading the table
rather than being executed right in place.
============================================================
The demo of this order issue is as follows:
Name (OBJ1, 1)
If (CND1 == 1)
{
Name (OBJ2, 2)
}
Name (OBJ3, 3)
The original MLC support created OBJ2 after OBJ3's creation.
============================================================
Other than these limitations, MLC support in ACPICA looks correct. And
supporting this should be easy/natural for ACPICA, but enabling of this was
blocked by some ACPICA internal and OSPM specific initialization order
issues we've fixed recently. The wrong support started from the following
false bug fixing commit:
Commit: 7f0c826a437157d2b19662977e9cf3b472cf24a6
Subject: ACPICA: Add support for module-level executable AML code
Commit: 9a884ab64a4d092b4c3bf24fd9a30f7fbd4591e7
Subject: ACPICA: Add additional module-level code support
...
We can confirm Windows interpreter behavior via reverse engineering means.
It can be proven that not only If/Else/While wrapped code blocks, all
opcodes can be executed at the module level, including operation region
accesses. And it can be proven that the MLC should be executed right in
place, not in such a deferred way executed after loading the table.
And the above facts indeed reflect the spec words around ACPI definition
block tables (DSDT/SSDT/...), the entire table and the Scope object is
defined by the AML specification in BNF style as:
AMLCode := def_block_header term_list
def_scope := scope_op pkg_length name_string term_list
The bodies of the scope opening terms (AMLCode/Scope) are all term_list,
thus the table loading should be no difference than the control method
evaluations as the body of the Method is also defined by the AML
specification as term_list:
def_method := method_op pkg_length name_string method_flags term_list
The only difference is: after evaluating control method, created named
objects may be freed due to no reference, while named objects created by
the table loading should only be freed after unloading the table.
So this patch follows the spec and the de-facto standard behavior, enables
the new grammar (term_list) for the table loading.
By doing so, beyond the fixes to the above issues, we can see additional
differences comparing to the old grammar based table loading:
1. Originally, beyond the scope opening terms (AMLCode/Scope),
If/Else/While wrapped code blocks under the scope creating terms
(Device/power_resource/Processor/thermal_zone) are also supported as
deferred MLC, which violates the spec defined grammar where object_list
is enforced. With MLC support improved as non-deferred, the interpreter
parses such scope creating terms as term_list rather object_list like the
scope opening terms.
After probing the Windows behavior and proving that it also parses these
terms as term_list, we submitted an ECR (Engineering Change Request) to
the ASWG (ACPI Specification Working Group) to clarify this. The ECR is
titled as "ASL Grammar Clarification for Executable AML Opcodes" and has
been accepted by the ASWG. The new grammar will appear in ACPI
specification 6.2.
2. Originally, Buffer/Package/operation_region/create_XXXField/bank_field
arguments are evaluated in a deferred way after loading the table. With
MLC support improved, they are also parsed right in place during the
table loading.
This is also Windows compliant and the only difference is the removal
of the debugging messages implemented before acpi_ds_execute_arguments(),
see Link # [1] for the details. A previous commit should have ensured
that acpi_check_address_range() won't regress.
Note that enabling this feature may cause regressions due to long term
Linux ACPI support on top of the wrong grammar. So this patch also prepares
a global option to be used to roll back to the old grammar during the
period between a regression is reported and the regression is
root-cause-fixed. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117671 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1]
Link: https://github.com/acpica/acpica/issues/122
Link: https://bugs.acpica.org/show_bug.cgi?id=963
Link: https://github.com/acpica/acpica/commit/0e24fb67
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Ehsan <dashesy@gmail.com>
Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
installation/uninstallation
ACPICA commit ed6a5fbc694f3a27d93014391aa9a6f6fe490461
This patch adds 2 new table events to indicate table
installation/uninstallation.
Currently, as ACPICA never uninstalls tables, this patch thus only adds
table handler invocation for the table installation event. Lv Zheng.
The 2 events are to be used to fix a sysfs table handling issue related to
LoadTable opcode (see Link # [1] below). The actual sysfs fixing code is
not included, the sysfs fixes will be sent as separate patches.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1]
Link: https://github.com/acpica/acpica/commit/ed6a5fbc
Reported-by: Jason Voelz <jason.voelz@intel.com>
Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit fcc129d04f865161f308d3b8743496cc3f4d233e
There are wrong table event macros, this patch cleans them up.
Link: https://bugs.acpica.org/show_bug.cgi?id=1321
Link: https://github.com/acpica/acpica/commit/fcc129d0
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
... in all cases, including the failing access_ok()
Note that some architectures using asm-generic/uaccess.h have
__copy_from_user() not zeroing the tail on failure halfway
through. This variant works either way.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is no such significant differences in pll2550x PLL type
to justify a separate registration function. This patch adapts
exynos5440 driver to use the common function and removes
samsung_clk_register_pll2550x().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The purpose of the efi_runtime_lock is to prevent concurrent calls into
the firmware. There is no need to use spinlocks here, as long as we ensure
that runtime service invocations from an atomic context (i.e., EFI pstore)
cannot block.
So use a semaphore instead, and use down_trylock() in the nonblocking case.
We don't use a mutex here because the mutex_trylock() function must not
be called from interrupt context, whereas the down_trylock() can.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
All efivars operations are protected by a spinlock which prevents
interruptions and preemption. This is too restricted, we just need a
lock preventing concurrency.
The idea is to use a semaphore of count 1 and to have two ways of
locking, depending on the context:
- In interrupt context, we call down_trylock(), if it fails we return
an error
- In normal context, we call down_interruptible()
We don't use a mutex here because the mutex_trylock() function must not
be called from interrupt context, whereas the down_trylock() can.
Signed-off-by: Sylvain Chouleur <sylvain.chouleur@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
This patch replaces the spinlock in the efivars struct with a single lock
for the whole vars.c file. The goal of this lock is to protect concurrent
calls to efi variable services, registering and unregistering. This allows
us to register new efivars operations without having in-progress call.
Signed-off-by: Sylvain Chouleur <sylvain.chouleur@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sylvain Chouleur <sylvain.chouleur@gmail.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Now that efi.memmap is available all of the time there's no need to
allocate and build a separate copy of the EFI memory map.
Furthermore, efi.memmap contains boot services regions but only those
regions that have been reserved via efi_mem_reserve(). Using
efi.memmap allows us to pass boot services across kexec reboot so that
the ESRT and BGRT drivers will now work.
Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Today, it is not possible for drivers to reserve EFI boot services for
access after efi_free_boot_services() has been called on x86. For
ARM/arm64 it can be done simply by calling memblock_reserve().
Having this ability for all three architectures is desirable for a
couple of reasons,
1) It saves drivers copying data out of those regions
2) kexec reboot can now make use of things like ESRT
Instead of using the standard memblock_reserve() which is insufficient
to reserve the region on x86 (see efi_reserve_boot_services()), a new
API is introduced in this patch; efi_mem_reserve().
efi.memmap now always represents which EFI memory regions are
available. On x86 the EFI boot services regions that have not been
reserved via efi_mem_reserve() will be removed from efi.memmap during
efi_free_boot_services().
This has implications for kexec, since it is not possible for a newly
kexec'd kernel to access the same boot services regions that the
initial boot kernel had access to unless they are reserved by every
kexec kernel in the chain.
Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
While efi_memmap_init_{early,late}() exist for architecture code to
install memory maps from firmware data and for the virtual memory
regions respectively, drivers don't care which stage of the boot we're
at and just want to swap the existing memmap for a modified one.
efi_memmap_install() abstracts the details of how the new memory map
should be mapped and the existing one unmapped.
Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Also move the functions from the EFI fake mem driver since future
patches will require access to the memmap insertion code even if
CONFIG_EFI_FAKE_MEM isn't enabled.
This will be useful when we need to build custom EFI memory maps to
allow drivers to mark regions as reserved.
Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Drivers need a way to access the EFI memory map at runtime. ARM and
arm64 currently provide this by remapping the EFI memory map into the
vmalloc space before setting up the EFI virtual mappings.
x86 does not provide this functionality which has resulted in the code
in efi_mem_desc_lookup() where it will manually map individual EFI
memmap entries if the memmap has already been torn down on x86,
/*
* If a driver calls this after efi_free_boot_services,
* ->map will be NULL, and the target may also not be mapped.
* So just always get our own virtual map on the CPU.
*
*/
md = early_memremap(p, sizeof (*md));
There isn't a good reason for not providing a permanent EFI memory map
for runtime queries, especially since the EFI regions are not mapped
into the standard kernel page tables.
Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump]
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm]
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
