summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-11-04netfilter: netns ebtables: part 1Alexey Dobriyan
* propagate netns from userspace, register table in passed netns * remporarily register every ebt_table in init_net P. S.: one needs to add ".netns_ok = 1" to igmp_protocol to test with ebtables(8) in netns. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-11-04netfilter: xt_NFLOG: don't call nf_log_packet in NFLOG module.Eric Leblond
This patch modifies xt_NFLOG to suppress the call to nf_log_packet() function. The call of this wrapper in xt_NFLOG was causing NFLOG to use the first initialized module. Thus, if ipt_ULOG is loaded before nfnetlink_log all NFLOG rules are treated as plain LOG rules. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-11-04libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply itTejun Heo
libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: John Clark <clarkjc@runbox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03bonding, net: Move last_rx update into bonding recv logicJay Vosburgh
The only user of the net_device->last_rx field is bonding. This patch adds a conditional update of last_rx to the bonding special logic in skb_bond_should_drop, causing last_rx to only be updated when the ARP monitor is running. This frees network device drivers from the necessity of updating last_rx, which can have cache line thrash issues. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03IPVS: Remove supports_ipv6 scheduler flagJulius Volz
Remove the 'supports_ipv6' scheduler flag since all schedulers now support IPv6. Signed-off-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03PCI: annotate return value of pci_ioremap_bar with __iomemHarvey Harrison
Was missing from the initial patch. Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03Merge branch 'io-mappings-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'io-mappings-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: io mapping: clean up #ifdefs io mapping: improve documentation i915: use io-mapping interfaces instead of a variety of mapping kludges resources: add io-mapping functions to dynamically map large device apertures x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps
2008-11-03Merge branch 'drm-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: i915: Add GEM ioctl to get available aperture size. drm/radeon: fixup further bus mastering confusion. build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n
2008-11-03rcu: increase RCU stall-check timeoutsPaul E. McKenney
Impact: increase timeout of debug check feature Increase RCU stall period timeouts to reduce the likelyhood of false positives. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03io mapping: clean up #ifdefsKeith Packard
Impact: cleanup clean up ifdefs: change #ifdef CONFIG_X86_32/64 to CONFIG_HAVE_ATOMIC_IOMAP. flip around the #ifdef sections to clean up the structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03Merge branch 'master' of ↵Ben Dooks
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c-moves2
2008-11-03ftrace: fix hardirq header for non ftrace archsSteven Rostedt
Impact: build fix for non-ftrace architectures Not all archs implement ftrace, and therefore do not have an asm/ftrace.h. This patch corrects the problem. The ftrace_nmi_enter/exit now must be defined for all archs that implement dynamic ftrace. Currently, only x86 does. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03Merge branches 'tracing/ftrace', 'tracing/markers', 'tracing/mmiotrace', ↵Ingo Molnar
'tracing/nmisafe', 'tracing/tracepoints' and 'tracing/urgent' into tracing/core
2008-11-03tracepoint: introduce *_noupdate APIs.Lai Jiangshan
Impact: add new tracepoint APIs to allow the batched registration of probes new APIs separate tracepoint_probe_register(), tracepoint_probe_unregister() into 2 steps. The first step of them is just update tracepoint_entry, not connect or disconnect. this patch introduces tracepoint_probe_update_all() for update all. these APIs are very useful for registering lots of probes but just updating once. Another very important thing is that *_noupdate APIs do not require module_mutex. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03Merge commit 'v2.6.28-rc3' into tracing/ftraceIngo Molnar
2008-11-03i915: Add GEM ioctl to get available aperture size.Eric Anholt
This will let userland know when to submit its batchbuffers, before they get too big to fit in the aperture. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) af_unix: netns: fix problem of return value IRDA: remove double inclusion of module.h udp: multicast packets need to check namespace net: add documentation for skb recycling key: fix setkey(8) policy set breakage bpa10x: free sk_buff with kfree_skb xfrm: do not leak ESRCH to user space net: Really remove all of LOOPBACK_TSO code. netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys net: delete excess kernel-doc notation pppoe: Fix socket leak. gianfar: Don't reset TBI<->SerDes link if it's already up gianfar: Fix race in TBI/SerDes configuration at91_ether: request/free GPIO for PHY interrupt amd8111e: fix dma_free_coherent context atl1: fix vlan tag regression SMC91x: delete unused local variable "lp" myri10ge: fix stop/go mmio ordering bonding: fix panic when taking bond interface down before removing module ...
2008-11-02linux/string.h: fix comment typoJeff Garzik
s/user/used/ Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01Merge branch 'cris_move' of git://www.jni.nu/crisLinus Torvalds
* 'cris_move' of git://www.jni.nu/cris: [CRIS] Move header files from include to arch/cris/include. [CRISv32] Remove warning in io.h
2008-10-31mac80211: fix two kernel-doc warningsJohannes Berg
One parameter wasn't described and one I forgot to update when renaming it; also update TBDs in sta_info. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove struct regdom hintingJohannes Berg
The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: make regdom passing semantics simplerJohannes Berg
The regdom struct is given to the core, so it might as well free it in error conditions. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: Re-enable aggregationSujith
Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflictsJohn W. Linville
There is quite a lot of overlap in definitions between these headers... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: use individual buffers for printing ssid valuesJohn W. Linville
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: remove NETWORK_EMPTY_ESSID flagJohn W. Linville
It is unnecessary and of questionable value. Also remove is_empty_ssid, as it is also unnecessary. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: don't publish __regulatory_hintJohannes Berg
This function requires an internal lock to be held, so it cannot be published to other modules in the kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: fix a few typos in mac80211 kernel docBob Copeland
Correct a handful of errors found while reading the mac80211 book. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Add nl80211 commands to get and set o11s mesh networking parameterscolin@cozybit.com
The two new commands are NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum, NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration parameters. Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h. nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages and ask the driver to get or set the configuration. This is done via two new function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops. Signed-off-by: Colin McCabe <colin@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove rate_control_clearJohannes Berg
"Clearing" the rate control algorithm is pointless, none of the algorithms actually uses this operation and it's not even invoked properly for all channel switching. Also, there's no need to since rate control algorithms work per station. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211/drivers: rewrite the rate control APIJohannes Berg
So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: rewrite HT handlingJohannes Berg
The HT handling has the following deficiencies, which I've (partially) fixed: * it always uses the AP info even if there is no AP, hence has no chance of working as an AP * it pretends to be HW config, but really is per-BSS * channel sanity checking is left to the drivers * it generally lets the driver control too much HT enabling is still wrong with this patch if you have more than one virtual STA mode interface, but that never happens currently. Once WDS, IBSS or AP/VLAN gets HT capabilities, it will also be wrong, see the comment in ieee80211_enable_ht(). Additionally, this fixes a number of bugs: * mac80211: ieee80211_set_disassoc doesn't notify the driver any more since the refactoring * iwl-agn-rs: always uses the HT capabilities from the wrong stuff mac80211 gives it rather than the actual peer STA * ath9k: a number of bugs resulting from the broken HT API I'm not entirely happy with putting the HT capabilities into struct ieee80211_sta as restricted to our own HT TX capabilities, but I see no cleaner solution for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: move bss_conf into vifJohannes Berg
Move bss_conf into the vif struct so that drivers can access it during ->tx without having to store it in the private data or similar. No driver updates because this is only for when they want to start using it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: make retry limits part of hw configJohannes Berg
Instead of having a separate callback, use the HW config callback with a new flag to change retry limits. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31nl80211: export HT capabilitiesJohannes Berg
This exports the local HT capabilities in nl80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: introduce hw config change flagsJohannes Berg
This makes mac80211 notify the driver which configuration actually changed, e.g. channel etc. No driver changes, this is just plumbing, driver authors are expected to act on this if they want to. Also remove the HW CONFIG debug printk, it's incorrect, often we configure something else. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: kill hw.conf.antenna_sel_{rx,tx}Johannes Berg
Never actually used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31802.11: clean up/fix HT supportJohannes Berg
This patch cleans up a number of things: * the unusable definition of the HT capabilities/HT information information elements * variable names that are hard to understand * mac80211: move ieee80211_handle_ht to ht.c and remove the unused enable_ht parameter * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht * mac80211: fix bug with casting the result of ieee80211_bss_get_ie to an information element _contents_ rather than the whole element, add size checking (another out-of-bounds access bug fixed!) * mac80211: remove some unused return values in favour of BUG_ON checking * a few minor other things Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: fix short slot handlingJohannes Berg
This patch makes mac80211 handle short slot requests from the AP properly. Also warn about uses of IEEE80211_CONF_SHORT_SLOT_TIME and optimise out the code since it cannot ever be hit anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove max_antenna_gain configJohannes Berg
The antenna gain isn't exactly configurable, despite the belief of some unnamed individual who thinks that the EEPROM might influence it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove wiphy_to_hwJohannes Berg
This isn't used by anyone, if we ever need it we can add it back, until then it's useless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Merge commit 'v2.6.28-rc2' into topic/asocTakashi Iwai
2008-10-31uwb: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: David Vrabel <david.vrabel@csr.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-31Merge branch 'topic/fix/asoc' into topic/asocTakashi Iwai
2008-10-31ftrace: nmi safe code clean upsSteven Rostedt
Impact: cleanup This patch cleans up the NMI safe code for dynamic ftrace as suggested by Andrew Morton. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31resources: add io-mapping functions to dynamically map large device aperturesKeith Packard
Impact: add new generic io_map_*() APIs Graphics devices have large PCI apertures which would consume a significant fraction of a 32-bit address space if mapped during driver initialization. Using ioremap at runtime is impractical as it is too slow. This new set of interfaces uses atomic mappings on 32-bit processors and a large static mapping on 64-bit processors to provide reasonable 32-bit performance and optimal 64-bit performance. The current implementation sits atop the io_map_atomic fixmap-based mechanism for 32-bit processors. This includes some editorial suggestions from Randy Dunlap for Documentation/io-mapping.txt Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmapsKeith Packard
Impact: introduce new APIs, separate kmap code from CONFIG_HIGHMEM This takes the code used for CONFIG_HIGHMEM memory mappings except that it's designed for dynamic IO resource mapping. These fixmaps are available even with CONFIG_HIGHMEM turned off. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31kexec/i386: allocate page table pages dynamicallyHuang Ying
Impact: save .text size when kexec is built in but not loaded This patch adds an architecture specific struct kimage_arch into struct kimage. The pointers to page table pages used by kexec are added to struct kimage_arch. The page tables pages are dynamically allocated in machine_kexec_prepare instead of statically from BSS segment. This will save up to 20k memory when kexec image is not loaded. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31misc: replace NIPQUAD()Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 01:08:49 +0000