summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-11-30habanalabs: add support for cs with timestampOfir Bitton
add support for user to request a timestamp upon cs completion. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: indicate to user that a cs is goneOfir Bitton
We want to indicate to the user that a certain command submission is finished long time ago and it is no longer in database. This means no further information regarding this cs can be obtained. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fetch pll frequency from firmwareAlon Mizrahi
Once firmware security is enabled, driver must fetch pll frequencies through the firmware message interface instead of reading the registers directly. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: add 'needs reset' state in driverOfir Bitton
The new state indicates that device should be reset in order to re-gain funcionality. This unique state can occur if reset_on_lockup is disabled and an actual lockup has occurred. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fix cs counters structurefarah kassabri
Fix cs counters structure in uapi to be one flat structure instead of two instances of the same other structure. use atomic read/increment for context counters so we could use one structure for both aggregated and context counters. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective supportOfir Bitton
Implement sync stream collective for GAUDI. Need to allocate additional resources for that and add ctx_fini() to clean up those resources. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs/gaudi: Set DMA5 QMAN internalOfir Bitton
DMA5 QMAN is designated to be used for reduction process, hence it will be no longer configured as external queue. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective infrastructureOfir Bitton
Define new API for collective wait support and modify sync stream common flow. In addition add kernel CB allocation support for internal queues. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: use enum for CB allocation optionsTal Cohen
In the future there will be situations where queues can accept either kernel allocated CBs or user allocated CBs, depending on different states. Therefore, instead of using a boolean variable of kernel/user allocated CB, we need to use a bitmask to indicate that, which will allow to combine the two options. Add a flag to the uapi so the user will be able to indicate whether the CB was allocated by kernel or by user. Of course the driver validates that. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30mtd: nand: ecc-bch: Stop using raw NAND structuresMiquel Raynal
This code is meant to be reused by the SPI-NAND core. Now that the driver has been cleaned and reorganized, use a generic ECC engine object to store the driver's data instead of accessing members of the nand_chip structure. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-9-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Update the prototypes to be more genericMiquel Raynal
These functions must be usable by the main NAND core, so their names must be technology-agnostic as well as the parameters. Hence, we pass a generic nand_device instead of a raw nand_chip structure. As it seems that changing the raw NAND functions to always pass a generic NAND device is a lost of time, we prefer to create dedicated raw NAND wrappers that will be useful in the near future to do the translation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-8-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Drop mtd_nand_has_bch()Miquel Raynal
Like for any other compilation option, use the IS_ENABLED() macro instead of hardcoding it. By droping this helper we can get rid of the BCH header in nandsim.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-7-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Return only valid error codesMiquel Raynal
When a function is not available, returning -ENOTSUPP makes much more sense than returning -1. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-6-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Stop exporting the private structureMiquel Raynal
The NAND BCH control structure has nothing to do outside of this driver, all users of the nand_bch_init/free() functions just save it to chip->ecc.priv so do it in this driver directly and return a regular error code instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-5-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Move BCH code to the generic NAND layerMiquel Raynal
BCH ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-3-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc: Add an I/O request tweaking mechanismMiquel Raynal
Currently, BCH and Hamming engine are sharing the same tweaking/restoring I/O mechanism: they need the I/O request to fully cover the main/OOB area. Let's make this code generic as sharing the code between two drivers is already a win. Maybe other ECC engine drivers will need it too. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-2-miquel.raynal@bootlin.com
2020-11-30Merge 5.10-rc6 into char-misc-nextGreg Kroah-Hartman
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-30Merge 5.10-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-29Merge remote-tracking branch 'arm64/for-next/iommu/io-pgtable-domain-attr' ↵Rob Clark
into msm-next-staging Pull in new iommu domain attr. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported by syzbot. 2) Remove spurious reports on nf_tables when lockdep gets disabled, from Florian Westphal. 3) Fix memleak in the error path of error path of ip_vs_control_net_init(), from Wang Hai. 4) Fix missing control data in flow dissector, otherwise IP address matching in hardware offload infra does not work. 5) Fix hardware offload match on prefix IP address when userspace does not send a bitwise expression to represent the prefix. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nftables_offload: build mask based from the matching bytes netfilter: nftables_offload: set address type in control dissector ipvs: fix possible memory leak in ip_vs_control_net_init netfilter: nf_tables: avoid false-postive lockdep splat netfilter: ipset: prevent uninit-value in hash_ip6_add ==================== Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2020-11-28 1) Do not reference the skb for xsk's generic TX side since when looped back into RX it might crash in generic XDP, from Björn Töpel. 2) Fix umem cleanup on a partially set up xsk socket when being destroyed, from Magnus Karlsson. 3) Fix an incorrect netdev reference count when failing xsk_bind() operation, from Marek Majtyka. 4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(), from Zhen Lei. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add MAINTAINERS entry for BPF LSM bpftool: Fix error return value in build_btf_type_table net, xsk: Avoid taking multiple skbuff references xsk: Fix incorrect netdev reference count xsk: Fix umem cleanup bug at socket destruct MAINTAINERS: Update XDP and AF_XDP entries ==================== Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28ALSA: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201127192312.2861127-1-trix@redhat.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-28bus: mhi: core: Indexed MHI controller nameLoic Poulain
Today the MHI controller name is simply cloned from the underlying bus device (its parent), that gives the following device structure for e.g. a MHI/PCI controller: devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:02:00.0 devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:02:00.0/0000:02:00.0_IPCR ... That's quite misleading/confusing and can cause device registering issues because of duplicate dev name (e.g. if a PCI device register two different MHI instances). This patch changes MHI core to create indexed mhi controller names (mhi0, mhi1...) in the same way as other busses (i2c0, usb0...). The previous example becomes: devices/pci0000:00/0000:00:01.2/0000:02:00.0/mhi0 devices/pci0000:00/0000:00:01.2/0000:02:00.0/mhi0/mhi0_IPCR ... v2: move index field at the end of mhi_controller struct (before bool) to avoid breaking well packed alignment. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge tag 'asm-generic-fixes-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic. This is a single bugfix for a bug that Stefan Agner found on 32-bit Arm, but that exists on several other architectures" * tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
2020-11-27Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'net-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc6, including fixes from the WiFi driver, and CAN subtrees. Current release - regressions: - gro_cells: reduce number of synchronize_net() calls - ch_ktls: release a lock before jumping to an error path Current release - always broken: - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header Previous release - regressions: - net/tls: fix missing received data after fast remote close - vsock/virtio: discard packets only when socket is really closed - sock: set sk_err to ee_errno on dequeue from errq - cxgb4: fix the panic caused by non smac rewrite Previous release - always broken: - tcp: fix corner cases around setting ECN with BPF selection of congestion control - tcp: fix race condition when creating child sockets from syncookies on loopback interface - usbnet: ipheth: fix connectivity with iOS 14 - tun: honor IOCB_NOWAIT flag - net/packet: fix packet receive on L3 devices without visible hard header - devlink: Make sure devlink instance and port are in same net namespace - net: openvswitch: fix TTL decrement action netlink message format - bonding: wait for sysfs kobject destruction before freeing struct slave - net: stmmac: fix upstream patch applied to the wrong context - bnxt_en: fix return value and unwind in probe error paths Misc: - devlink: add extra layer of categorization to the reload stats uAPI before it's released" * tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) sock: set sk_err to ee_errno on dequeue from errq mptcp: fix NULL ptr dereference on bad MPJ net: openvswitch: fix TTL decrement action netlink message format can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0 can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given can: gs_usb: fix endianess problem with candleLight firmware ch_ktls: lock is not freed net/tls: Protect from calling tls_dev_del for TLS RX twice devlink: Make sure devlink instance and port are in same net namespace devlink: Hold rtnl lock while reading netdev attributes ptp: clockmatrix: bug fix for idtcm_strverscmp enetc: Let the hardware auto-advance the taprio base-time of 0 gro_cells: reduce number of synchronize_net() calls net: stmmac: fix incorrect merge of patch upstream ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init Documentation: netdev-FAQ: suggest how to post co-dependent series ibmvnic: enhance resetting status check during module exit ...
2020-11-27net/sched: sch_frag: add generic packet fragment support.wenxu
Currently kernel tc subsystem can do conntrack in cat_ct. But when several fragment packets go through the act_ct, function tcf_ct_handle_fragments will defrag the packets to a big one. But the last action will redirect mirred to a device which maybe lead the reassembly big packet over the mtu of target device. This patch add support for a xmit hook to mirred, that gets executed before xmiting the packet. Then, when act_ct gets loaded, it configs that hook. The frag xmit hook maybe reused by other modules. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Cong Wang <cong.wang@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/sched: act_mirred: refactor the handle of xmitwenxu
This one is prepare for the next patch. Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: add CHACHA20-POLY1305 specific behaviorVadim Fedorenko
RFC 7905 defines special behavior for ChaCha-Poly TLS sessions. The differences are in the calculation of nonce and the absence of explicit IV. This behavior is like TLSv1.3 partly. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: add CHACHA20-POLY1305 specific defines and structuresVadim Fedorenko
To provide support for ChaCha-Poly cipher we need to define specific constants and structures. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net/tls: make inline helpers protocol-awareVadim Fedorenko
Inline functions defined in tls.h have a lot of AES-specific constants. Remove these constants and change argument to struct tls_prot_info to have an access to cipher type in later patches Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27net: openvswitch: fix TTL decrement action netlink message formatEelco Chaudron
Currently, the openvswitch module is not accepting the correctly formated netlink message for the TTL decrement action. For both setting and getting the dec_ttl action, the actions should be nested in the OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi. When the original patch was sent, it was tested with a private OVS userspace implementation. This implementation was unfortunately not upstreamed and reviewed, hence an erroneous version of this patch was sent out. Leaving the patch as-is would cause problems as the kernel module could interpret additional attributes as actions and vice-versa, due to the actions not being encapsulated/nested within the actual attribute, but being concatinated after it. Fixes: 744676e77720 ("openvswitch: add TTL decrement action") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27ALSA: compress: allow pause and resume during drainingGyeongtaek Lee
With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel. If pause, resume are allowed during draining, user experience can be enhanced. To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining(). Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-27Merge tag 'writeback_for_v5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull writeback fix from Jan Kara: "A fix of possible missing string termination in writeback tracepoints" * tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: trace: fix potenial dangerous pointer
2020-11-27ASoC: SOF: ops: add parse_platform_ext_manifest() opFred Oh
Add parse_platform_ext_manifest() op to parse platform-specific config data in the extended manifest. Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-27Merge branch 'for-5.10' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.11
2020-11-27RDMA/restrack: Support all QP typesLeon Romanovsky
The latest changes in restrack name handling allowed to simplify the QP creation code to support all types of QPs. For example XRC QP are presented with rdmatool. $ ibv_xsrq_pingpong & $ rdma res show qp link ibp0s9/1 lqpn 0 type SMI state RTS sq-psn 0 comm [ib_core] link ibp0s9/1 lqpn 1 type GSI state RTS sq-psn 0 comm [ib_core] link ibp0s9/1 lqpn 7 type UD state RTS sq-psn 0 comm [mlx5_ib] link ibp0s9/1 lqpn 42 type XRC_TGT state INIT sq-psn 0 path-mig-state MIGRATED comm [ib_uverbs] link ibp0s9/1 lqpn 43 type XRC_INI state INIT sq-psn 0 path-mig-state MIGRATED pdn 197 pid 419 comm ibv_xsrq_pingpong Link: https://lore.kernel.org/r/20201117070148.1974114-4-leon@kernel.org Reviewed-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-27RDMA/core: Allow drivers to disable restrack DBLeon Romanovsky
Driver QP types are special case with no IBTA restrictions. For example, EFA implemented creation of this QP type as regular one, while mlx5 separated create to two step: create and modify. That separation causes to the situation where DC QP (mlx5) is always added to the same xarray index zero. This change allows to drivers like mlx5 simply disable restrack DB tracking, but it doesn't disable kref on the memory. Fixes: 52e0a118a203 ("RDMA/restrack: Track driver QP types in resource tracker") Link: https://lore.kernel.org/r/20201117070148.1974114-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-27nvmem: core: Add support for keepout regionsEvan Green
Introduce support into the nvmem core for arrays of register ranges that should not result in actual device access. For these regions a constant byte (repeated) is returned instead on read, and writes are quietly ignored and returned as successful. This is useful for instance if certain efuse regions are protected from access by Linux because they contain secret info to another part of the system (like an integrated modem). Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201127102837.19366-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-27HID: hidraw: Add additional hidraw input/output report ioctls.Dean Camera
Currently the hidraw module can only read and write feature HID reports on demand, via dedicated ioctls. Input reports are read from the device through the read() interface, while output reports are written through the write interface(). This is insufficient; it is desirable in many situations to be able to read and write input and output reports through the control interface to cover additional scenarios: - Reading an input report by its report ID, to get initial state - Writing an input report, to set initial input state in the device - Reading an output report by its report ID, to obtain current state - Writing an output report by its report ID, out of band This patch adds these missing ioctl requests to read and write the remaining HID report types. Note that not all HID backends will neccesarily support this (e.g. while the USB link layer supports setting Input reports, others may not). Also included are documentation and example updates. The current hidraw documentation states that feature reports read from the device does *not* include the report ID, however this is not the case and the returned report will have its report ID prepended by conforming HID devices, as the report data sent from the device over the control endpoint must be indentical in format to those sent over the regular transport. Signed-off-by: Dean Camera <dean@fourwalledcubicle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-27HID: Increase HID maximum report size to 16KBDean Camera
Currently the maximum HID report size which can be buffered by the kernel is 8KB. This is sufficient for the vast majority of HID devices on the market, as most HID reports are fairly small. However, some unusual devices such as the Elgate Stream Deck exist which use a report size slightly over 8KB for the image data that is sent to the device. Reports these large cannot be buffered by the regular HID subsystem currently, thus the only way to use such device is to bypass the HID subsystem entirely. This increases the maximum HID report size to 16KB, which should cover all sanely designed HID devices. Signed-off-by: Dean Camera <dean@fourwalledcubicle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-27mfd: si476x-core.h: Fix "regulator" spelling in commentMichael Klein
"regualtor" -> "regulator" Signed-off-by: Michael Klein <michael@fossekall.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-27Merge tag 'omap-for-v5.10/fixes-rc5-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27netfilter: nftables_offload: build mask based from the matching bytesPablo Neira Ayuso
Userspace might match on prefix bytes of header fields if they are on the byte boundary, this requires that the mask is adjusted accordingly. Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not allowed for this type of selector. The bitwise expression might be optimized out by userspace, hence the kernel needs to infer the prefix from the number of payload bytes to match on. This patch adds nft_payload_offload_mask() to calculate the bitmask to match on the prefix. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-27netfilter: nftables_offload: set address type in control dissectorPablo Neira Ayuso
This patch adds nft_flow_rule_set_addr_type() to set the address type from the nft_payload expression accordingly. If the address type is not set in the control dissector then a rule that matches either on source or destination IP address does not work. After this patch, nft hardware offload generates the flow dissector configuration as tc-flower does to match on an IP address. This patch has been also tested functionally to make sure packets are filtered out by the NIC. This is also getting the code aligned with the existing netfilter flow offload infrastructure which is also setting the control dissector. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-11-27Merge branch 'linus' into sched/core, to resolve semantic conflictIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-27xfrm: redact SA secret with lockdown confidentialityAntony Antony
redact XFRM SA secret in the netlink response to xfrm_get_sa() or dumpall sa. Enable lockdown, confidentiality mode, at boot or at run time. e.g. when enabled: cat /sys/kernel/security/lockdown none integrity [confidentiality] ip xfrm state src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x00000002 reqid 2 mode tunnel replay-window 0 aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96 note: the aead secret is redacted. Redacting secret is also a FIPS 140-2 requirement. v1->v2 - add size checks before memset calls v2->v3 - replace spaces with tabs for consistency v3->v4 - use kernel lockdown instead of a /proc setting v4->v5 - remove kconfig option Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-11-26net/mlx5: Treat host PF vport as other (non eswitch manager) vportParav Pandit
When eswitch manager is running on ECPF, host PF should be treated as non eswitch manager port, similar to other VF vports. Fail to do so, results in firmware treating PF's vport as ECPF vport for eswitch ACL tables. Non zero check to figure out if a given vport is other vport or not is not sufficient becase PF vport number = 0 on ECPF. Hence, create esw acl tables with an attribute of other vport. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-26net/mlx5: Rename peer_pf to host_pfParav Pandit
To match the hardware spec, rename peer_pf to host_pf. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-14 01:35:13 +0000