summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-05-27mac80211: Add new AMPDU factor macro for HE peer capsTamizh Chelvam
Add IEEE80211_HE_VHT_MAX_AMPDU_FACTOR and IEEE80211_HE_HT_MAX_AMPDU_FACTOR as per spec to use for peer max ampdu factor. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1588611900-21185-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27ieee80211: S1G definesThomas Pedersen
These are found in IEEE-802.11ah-2016. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-5-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: support scan frequencies in KHzThomas Pedersen
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: add KHz frequency offset for most wifi commandsThomas Pedersen
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add KHz variants of frame RX APIThomas Pedersen
Drivers may wish to report the RX frequency in units of KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with cfg80211_rx_mgmt() so exisiting drivers which can't report KHz anyway don't need to change. Add a similar wrapper for cfg80211_report_obss_beacon() so the frequency units stay somewhat consistent. This doesn't actually change the nl80211 API yet. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com [fix mac80211 calling the non-khz version of obss beacon report, drop trace point name changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27nl80211: simplify peer specific TID configurationSergey Matyukevich
Current rule for applying TID configuration for specific peer looks overly complicated. No need to reject new TID configuration when override flag is specified. Another call with the same TID configuration, but without override flag, allows to apply new configuration anyway. Use the same approach as for the 'all peers' case: if override flag is specified, then reset existing TID configuration and immediately apply a new one. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: add support for TID specific AMSDU configurationSergey Matyukevich
This patch adds support to control per TID MSDU aggregation using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-4-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27cfg80211: fix mask type in cfg80211_tid_cfg structureSergey Matyukevich
TIDs mask type is u64 in wiphy settings and nl80211 processing, see: - wiphy TIDs mask sizes in tid_config_support structure - prepare driver command in parse_tid_conf Use the same type for TIDs mask in cfg80211_tid_cfg. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-27mfd: Add support for PMIC MT6360Gene Chen
Add MFD driver for mt6360 pmic chip include Battery Charger/ USB_PD/Flash, LED/RGB and LED/LDO/Buck Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26clk: sprd: add dt-bindings include for mipi_csi_xx clocksChunyan Zhang
mipi_csi_xx clocks are used by camera sensors. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200527053638.31439-4-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26net: ethtool: Allow PHY cable test TDR data to configuredAndrew Lunn
Allow the user to configure where on the cable the TDR data should be retrieved, in terms of first and last sample, and the step between samples. Also add the ability to ask for TDR data for just one pair. If this configuration is not provided, it defaults to 1-150m at 1m intervals for all pairs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v3: Move the TDR configuration into a structure Add a range check on step Use NL_SET_ERR_MSG_ATTR() when appropriate Move TDR configuration into a nest Document attributes in the request Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: ethtool: Add helpers for cable test TDR dataAndrew Lunn
Add helpers for returning raw TDR helpers in netlink messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: ethtool: Add generic parts of cable test TDRAndrew Lunn
Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: ethtool: Add attributes for cable test TDR dataAndrew Lunn
Some Ethernet PHYs can return the raw time domain reflectromatry data. Add the attributes to allow this data to be requested and returned via netlink ethtool. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2: m -> cm Report what the PHY actually used for start/stop/step. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27nvme: add Metadata Capabilities enumerationsIsrael Rukshin
The enumerations will be used to expose the namespace metadata format by the target. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27block: always define struct blk_integrity in genhd.hMax Gurtovoy
This will reduce the amount of ifdefs inside the source code for various drivers and also will reduce the amount of stub functions that were created for the !CONFIG_BLK_DEV_INTEGRITY case. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-27nvme: replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-05-26net: check untrusted gso_size at kernel entryWillem de Bruijn
Syzkaller again found a path to a kernel crash through bad gso input: a packet with gso size exceeding len. These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment. But they may affect gso size calculations earlier in the path. Now that we have thlen as of commit 9274124f023b ("net: stricter validation of untrusted gso packets"), check gso_size at entry too. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26clk: at91: allow setting all PMC clock parents via DTMichał Mirosław
We need to have clocks accessible via phandle to select them as peripheral clock parent using assigned-clock-parents in DT. Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting PCKx parent via DTMichał Mirosław
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock IDTaniya Das
The gcc_sec_ctrl_clk_src clock is required to be controlled by the secure controller driver. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1589709861-27580-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26dt-bindings: documentation: add clock bindings information for AgilexDinh Nguyen
Document the Agilex clock bindings, and add the clock header file. The clock header is an enumeration of all the different clocks on the Agilex platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200512181647.5071-4-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26dt-bindings: clk: intel: Add bindings document & header file for CGURahul Tanwar
Clock generation unit(CGU) is a clock controller IP of Intel's Lightning Mountain(LGM) SoC. Add DT bindings include file and document for CGU clock controller driver of LGM. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lkml.kernel.org/r/8dce2be13195aab20c6b11fca6af0fffe22d5241.1587102634.git.rahul.tanwar@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26ipv4: nexthop version of fib_info_nh_uses_devDavid Ahern
Similar to the last path, need to fix fib_info_nh_uses_dev for external nexthops to avoid referencing multiple nh_grp structs. Move the device check in fib_info_nh_uses_dev to a helper and create a nexthop version that is called if the fib_info uses an external nexthop. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26ipv4: Refactor nhc evaluation in fib_table_lookupDavid Ahern
FIB lookups can return an entry that references an external nexthop. While walking the nexthop struct we do not want to make multiple calls into the nexthop code which can result in 2 different structs getting accessed - one returning the number of paths the rest of the loop seeing a different nh_grp struct. If the nexthop group shrunk, the result is an attempt to access a fib_nh_common that does not exist for the new nh_grp struct but did for the old one. To fix that move the device evaluation code to a helper that can be used for inline fib_nh path as well as external nexthops. Update the existing check for fi->nh in fib_table_lookup to call a new helper, nexthop_get_nhc_lookup, which walks the external nexthop with a single rcu dereference. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26nexthop: Expand nexthop_is_multipath in a few placesDavid Ahern
I got too fancy consolidating checks on multipath type. The result is that path lookups can access 2 different nh_grp structs as exposed by Nik's torture tests. Expand nexthop_is_multipath within nexthop.h to avoid multiple, nh_grp dereferences and make decisions based on the consistent struct. Only 2 places left using nexthop_is_multipath are within IPv6, both only check that the nexthop is a multipath for a branching decision which are acceptable. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26nexthops: don't modify published nexthop groupsNikolay Aleksandrov
We must avoid modifying published nexthop groups while they might be in use, otherwise we might see NULL ptr dereferences. In order to do that we allocate 2 nexthoup group structures upon nexthop creation and swap between them when we have to delete an entry. The reason is that we can't fail nexthop group removal, so we can't handle allocation failure thus we move the extra allocation on creation where we can safely fail and return ENOMEM. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26net: mdiobus: add clause 45 mdiobus accessorsRussell King
There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26cls_flower: Support filtering on multiple MPLS Label Stack EntriesGuillaume Nault
With struct flow_dissector_key_mpls now recording the first FLOW_DIS_MPLS_MAX labels, we can extend Flower to filter on any of these LSEs independently. In order to avoid creating new netlink attributes for every possible depth, let's define a new TCA_FLOWER_KEY_MPLS_OPTS nested attribute that contains the list of LSEs to match. Each LSE is represented by another attribute, TCA_FLOWER_KEY_MPLS_OPTS_LSE, which then contains the attributes representing the depth and the MPLS fields to match at this depth (label, TTL, etc.). For each MPLS field, the mask is always set to all-ones, as this is what the original API did. We could allow user configurable masks in the future if there is demand for more flexibility. The new API also allows to only specify an LSE depth. In that case, Flower only verifies that the MPLS label stack depth is greater or equal to the provided depth (that is, an LSE exists at this depth). Filters that only match on one (or more) fields of the first LSE are dumped using the old netlink attributes, to avoid confusing user space programs that don't understand the new API. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26flow_dissector: Parse multiple MPLS Label Stack EntriesGuillaume Nault
The current MPLS dissector only parses the first MPLS Label Stack Entry (second LSE can be parsed too, but only to set a key_id). This patch adds the possibility to parse several LSEs by making __skb_flow_dissect_mpls() return FLOW_DISSECT_RET_PROTO_AGAIN as long as the Bottom Of Stack bit hasn't been seen, up to a maximum of FLOW_DIS_MPLS_MAX entries. FLOW_DIS_MPLS_MAX is arbitrarily set to 7. This should be enough for many practical purposes, without wasting too much space. To record the parsed values, flow_dissector_key_mpls is modified to store an array of stack entries, instead of just the values of the first one. A bit field, "used_lses", is also added to keep track of the LSEs that have been set. The objective is to avoid defining a new FLOW_DISSECTOR_KEY_MPLS_XX for each level of the MPLS stack. TC flower is adapted for the new struct flow_dissector_key_mpls layout. Matching on several MPLS Label Stack Entries will be added in the next patch. The NFP and MLX5 drivers are also adapted: nfp_flower_compile_mac() and mlx5's parse_tunnel() now verify that the rule only uses the first LSE and fail if it doesn't. Finally, the behaviour of the FLOW_DISSECTOR_KEY_MPLS_ENTROPY key is slightly modified. Instead of recording the first Entropy Label, it now records the last one. This shouldn't have any consequences since there doesn't seem to have any user of FLOW_DISSECTOR_KEY_MPLS_ENTROPY in the tree. We'd probably better do a hash of all parsed MPLS labels instead (excluding reserved labels) anyway. That'd give better entropy and would probably also simplify the code. But that's not the purpose of this patch, so I'm keeping that as a future possible improvement. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26qed: Add EDPM mode type for user-fw compatibilityYuval Basson
In older FW versions the completion flag was treated as the ack flag in edpm messages. Expose the FW option of setting which mode the QP is in by adding a flag to the qedr <-> qed API. Flag is added for backward compatibility with libqedr. This flag will be set by qedr after determining whether the libqedr is using the updated version. Fixes: f10939403352 ("qed: Add support for QP verbs") Signed-off-by: Yuval Basson <yuval.bason@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27software node: implement software_node_unregister()Greg Kroah-Hartman
Sometimes it is better to unregister individual nodes instead of trying to do them all at once with software_node_unregister_nodes(), so create software_node_unregister() so that you can unregister them one at a time. This is especially important when creating nodes in a hierarchy, with parent -> children representations. Children always need to be removed before a parent is, as the swnode logic assumes this is going to be the case. Fix up the lib/test_printf.c fwnode_pointer() test which to use this new function as it had the problem of tearing things down in the backwards order. Fixes: f1ce39df508d ("lib/test_printf: Add tests for %pfw printk modifier") Cc: stable <stable@vger.kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Petr Mladek <pmladek@suse.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200524153041.2361-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-26rcu: Provide rcu_irq_exit_check_preempt()Thomas Gleixner
Provide a debug check which can be invoked from exception return to kernel mode before an attempt is made to schedule. Warn if RCU is not ready for this. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20200521202117.089709607@linutronix.de
2020-05-26rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()Paul E. McKenney
There will likely be exception handlers that can sleep, which rules out the usual approach of invoking rcu_nmi_enter() on entry and also rcu_nmi_exit() on all exit paths. However, the alternative approach of just not calling anything can prevent RCU from coaxing quiescent states from nohz_full CPUs that are looping in the kernel: RCU must instead IPI them explicitly. It would be better to enable the scheduler tick on such CPUs to interact with RCU in a lighter-weight manner, and this enabling is one of the things that rcu_nmi_enter() currently does. What is needed is something that helps RCU coax quiescent states while not preventing subsequent sleeps. This commit therefore splits out the nohz_full scheduler-tick enabling from the rest of the rcu_nmi_enter() logic into a new function named rcu_irq_enter_check_tick(). [ tglx: Renamed the function and made it a nop when context tracking is off ] [ mingo: Fixed a CONFIG_NO_HZ_FULL assumption, harmonized and fixed all the comment blocks and cleaned up rcu_nmi_enter()/exit() definitions. ] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200521202116.996113173@linutronix.de
2020-05-26Merge tag 'thunderbolt-for-v5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.8 merge window This adds support for Intel Tiger Lake Thunderbolt controller using firmware based connection manager. In addition the driver can now be built on non-x86 architectures as well. Then there are a couple of commits that make the driver work across kexec, replace a zero length array with flexible one, and revert one change that is not needed anymore because of NVMem subsystem improvements. * tag 'thunderbolt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add trivial .shutdown thunderbolt: Update Kconfig to allow building on other architectures. thunderbolt: Replace zero-length array with flexible-array thunderbolt: Add support for Intel Tiger Lake Revert "thunderbolt: Prevent crash if non-active NVMem file is read"
2020-05-26mfd: stmfx: Disable IRQ in suspend to avoid spurious interruptAmelie Delaunay
When STMFX supply is stopped, spurious interrupt can occur. To avoid that, disable the interrupt in suspend before disabling the regulator and re-enable it at the end of resume. Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26mfd: Constify properties in mfd_cellTomas Winkler
Constify 'struct property_entry *properties' in mfd_cell. It is always passed around as a pointer const struct. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', ↵Lee Jones
'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged
2020-05-26iio: adc: mp2629: Add support for mp2629 ADC driverSaravanan Sekar
Add support for 8-bit resolution ADC readings for input power supply and battery charging measurement. Provides voltage, current readings to mp2629 power supply driver. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26mfd: mp2629: Add support for mps battery chargerSaravanan Sekar
mp2629 is a highly-integrated switching-mode battery charge management device for single-cell Li-ion or Li-polymer battery. Add MFD core enables chip access for ADC driver for battery readings, and a power supply battery-charger driver Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-26Merge tag 'usb-ci-v5.8-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Some improvments for ci_hdrc_usb2.c - Support imx7d USB charger - Add software sg support for UDC - Enable user trigger role switch * tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: Enable user-space triggered role-switching usb: chipidea: udc: add software sg list support usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp usb: chipidea: pull down dp for possible charger detection operation usb: chipidea: introduce imx7d USB charger detection usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use usb: chipidea: usb2: remove unneeded semicolon usb: chipidea: allow disabling glue drivers if EMBEDDED usb: chipidea: usb2: absorb zevio glue driver usb: chipidea: usb2: make clock optional usb: chipidea: usb2: fix formatting usb: chipidea: usb2: constify zynq_pdata usb: chipidea: core: show the real pointer value for register usb: chipidea: core: refine the description for this driver usb: chipidea: udc: fix the kernel doc for udc.h
2020-05-26mtd: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200507190033.GA15215@embeddedor
2020-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Set VLAN tag in tcp reset/icmp unreachable packets to reject connections in the bridge family, from Michael Braun. 2) Incorrect subcounter flag update in ipset, from Phil Sutter. 3) Possible buffer overflow in the pptp conntrack helper, based on patch from Dan Carpenter. 4) Restore userspace conntrack helper hook logic that broke after hook consolidation rework. 5) Unbreak userspace conntrack helper registration via nfnetlink_cthelper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25Merge tag 'mac80211-for-net-2020-05-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few changes: * fix a debugfs vs. wiphy rename crash * fix an invalid HE spec definition * fix a mesh timer crash ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mailmap: change email for Ricardo RibaldaRicardo Ribalda Delgado
Modify emails to ribalda@kernel.org and unify my surname in all the files. Signed-off-by: Ricardo Ribalda <ribalda@kernel.org> Link: https://lore.kernel.org/r/20200430135224.362700-1-ricardo@ribalda.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-25net/tls: fix race condition causing kernel panicVinay Kumar Yadav
tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently. // tls_sw_recvmsg() if (atomic_read(&ctx->decrypt_pending)) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); else reinit_completion(&ctx->async_wait.completion); //tls_decrypt_done() pending = atomic_dec_return(&ctx->decrypt_pending); if (!pending && READ_ONCE(ctx->async_notify)) complete(&ctx->async_wait.completion); Consider the scenario tls_decrypt_done() is about to run complete() if (!pending && READ_ONCE(ctx->async_notify)) and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(), then tls_decrypt_done() runs complete(). This sequence of execution results in wrong completion. Consequently, for next decrypt request, it will not wait for completion, eventually on connection close, crypto resources freed, there is no way to handle pending decrypt response. This race condition can be avoided by having atomic_read() mutually exclusive with atomic_dec_return(),complete().Intoduced spin lock to ensure the mutual exclution. Addressed similar problem in tx direction. v1->v2: - More readable commit message. - Corrected the lock to fix new race scenario. - Removed barrier which is not needed now. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'hisi-drivers-for-5.8' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/drivers ARM64: hisi: SoC driver updates for 5.8 - Generate consistent behaviour for logic_pio by defining and using generic _inX() and _outX() in asm-generic/io.h which have per-arch overrideable barriers. * tag 'hisi-drivers-for-5.8' of git://github.com/hisilicon/linux-hisi: logic_pio: Use _inX() and _outX() logic_pio: Improve macro argument name io: Provide _inX() and _outX()
2020-05-26Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.8 Highlights: - new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW (S905D), Hardkernel ODROID-C4 (SM1) - audio: support for GX-family SoCs - audio: internal DAC support - use the new USB control driver for GXL and GXM * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits) arm64: dts: meson-g12b-gtking-pro: add initial device-tree dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro arm64: dts: meson-g12b-gtking: add initial device-tree dt-bindings: arm: amlogic: add support for the Beelink GT-King arm64: dts: meson: convert ugoos-am6 to common w400 dtsi arm64: dts: meson: add ethernet interrupt to wetek dtsi arm64: dts: meson: add support for the Smartlabs SML-5442TW dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW dt-bindings: add vendor prefix for Smartlabs LLC arm64: dts: meson: g12: add internal DAC glue arm64: dts: meson: g12: add internal DAC arm64: dts: meson: libretech-pc: add internal DAC support arm64: dts: meson: libretech-ac: add internal DAC support arm64: dts: meson: libretech-cc: add internal DAC support arm64: dts: meson: p230-q200: add internal DAC support arm64: dts: meson: gxl: add acodec support arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4 dt-bindings: arm: amlogic: add odroid-c4 bindings arm64: dts: meson-sm1: add cpu thermal nodes arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi ... Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'imx-soc-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.8: - Add soc device support for Vybrid/VF platform. - Move the i.MX soc device registration code from mach-imx to drivers/soc/imx for possible future consolidation with i.MX8 code. - A small fixup to make pcm970_sja1000_platform_data static. * tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static ARM: vf610: report soc info via soc device Link: https://lore.kernel.org/r/20200523032516.11016-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-12 10:57:05 +0000