| Age | Commit message (Collapse) | Author |
|---|
|
Merge the immutable branch genpd_dt into next, to allow the DT bindings to
be tested together with new pmdomain changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add power domains dt-bindings for MT8365.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230918093751.1188668-2-msp@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Dual-licence in order to make it possible for other non-GPL os'es
to re-implement the code. The use of EXPORT_SYMBOL_GPL() is intentionally
left untouched to prevent use of drm_gpuvm as a proxy for non-GPL drivers
to access GPL-only kernel symbols.
Much of the ideas and algorithms used in the drm_gpuvm code is already
present in one way or another in MIT-licensed code.
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: airlied@gmail.com
Cc: daniel@ffwll.ch
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010142725.8920-1-thomas.hellstrom@linux.intel.com
|
|
While adding a preferred console handling for serial_core for serial port
hardware based device addressing, Jiri suggested we constify name for
add_preferred_console(). The name gets copied anyways. This allows serial
core to add a preferred console using serial drv->dev_name without copying
it.
Note that constifying options causes changes all over the place because of
struct console for match().
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's check for valid console index values for preferred console to avoid
bogus console index numbers from kernel command line.
Let's also return an error for negative index numbers for the preferred
console. Unlike for device drivers, a negative index is not valid for the
preferred console.
Let's also constify idx while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vga console driver is fairly self-contained, and only used by
architectures that explicitly initialize the screen_info settings.
Chance every instance that picks the vga console by setting conswitchp
to call a function instead, and pass a reference to the screen_info
there.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Azzi <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.7.
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
# 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
# VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
# YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
# L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
# 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
# Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
# =2ien
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
|
|
Currently page_pool_alloc_frag() is not supported in 32-bit
arch with 64-bit DMA because of the overlap issue between
pp_frag_count and dma_addr_upper in 'struct page' for those
arches, which seems to be quite common, see [1], which means
driver may need to handle it when using fragment API.
It is assumed that the combination of the above arch with an
address space >16TB does not exist, as all those arches have
64b equivalent, it seems logical to use the 64b version for a
system with a large address space. It is also assumed that dma
address is page aligned when we are dma mapping a page aligned
buffer, see [2].
That means we're storing 12 bits of 0 at the lower end for a
dma address, we can reuse those bits for the above arches to
support 32b+12b, which is 16TB of memory.
If we make a wrong assumption, a warning is emitted so that
user can report to us.
1. https://lore.kernel.org/all/20211117075652.58299-1-linyunsheng@huawei.com/
2. https://lore.kernel.org/all/20230818145145.4b357c89@kernel.org/
Tested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Guillaume Tucker <guillaume.tucker@collabora.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Linux-MM <linux-mm@kvack.org>
Link: https://lore.kernel.org/r/20231013064827.61135-2-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix race when opening vhci device
- Avoid memcmp() out of bounds warning
- Correctly bounds check and pad HCI_MON_NEW_INDEX name
- Fix using memcmp when comparing keys
- Ignore error return for hci_devcd_register() in btrtl
- Always check if connection is alive before deleting
- Fix a refcnt underflow problem for hci_conn
* tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
Bluetooth: avoid memcmp() out of bounds warning
Bluetooth: hci_sock: fix slab oob read in create_monitor_event
Bluetooth: btrtl: Ignore error return for hci_devcd_register()
Bluetooth: hci_event: Fix coding style
Bluetooth: hci_event: Fix using memcmp when comparing keys
Bluetooth: Fix a refcnt underflow problem for hci_conn
Bluetooth: hci_sync: always check if connection is alive before deleting
Bluetooth: Reject connection with the device which has same BD_ADDR
Bluetooth: hci_event: Ignore NULL link key
Bluetooth: ISO: Fix invalid context error
Bluetooth: vhci: Fix race when opening vhci device
====================
Link: https://lore.kernel.org/r/20231014031336.1664558-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through the
"operating-points-v2" property which accepts the OPP table defining clock
frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS core is only scaling the clocks during devfreq scaling and
initialization. But for an optimum power saving, regulators should also be
scaled along with the clocks.
So let's use the OPP framework which supports scaling clocks, regulators,
and performance state using OPP table defined in devicetree. For
accomodating the OPP support, the existing APIs (ufshcd_scale_clks,
ufshcd_is_devfreq_scaling_required and ufshcd_devfreq_scale) are modified
to accept "freq" as an argument which in turn used by the OPP helpers.
The OPP support is added along with the old freq-table based clock scaling
so that the existing platforms work as expected.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A few networking drivers including bnx2x, bnxt, qede, and idpf call
tcp_gro_complete as part of offloading TCP GRO. The function is only
defined if CONFIG_INET is true, since its TCP specific and is meaningless
if the kernel lacks IP networking support.
The combination of trying to use the complex network drivers with
CONFIG_NET but not CONFIG_INET is rather unlikely in practice: most use
cases are going to need IP networking.
The tcp_gro_complete function just sets some data in the socket buffer for
use in processing the TCP packet in the event that the GRO was offloaded to
the device. If the kernel lacks TCP support, such setup will simply go
unused.
The bnx2x, bnxt, and qede drivers wrap their TCP offload support in
CONFIG_INET checks and skip handling on such kernels.
The idpf driver did not check CONFIG_INET and thus fails to link if the
kernel is configured with CONFIG_NET=y, CONFIG_IDPF=(m|y), and
CONFIG_INET=n.
While checking CONFIG_INET does allow the driver to bypass significantly
more instructions in the event that we know TCP networking isn't supported,
the configuration is unlikely to be used widely.
Rather than require driver authors to care about this, stub the
tcp_gro_complete function when CONFIG_INET=n. This allows drivers to be
left as-is. It does mean the idpf driver will perform slightly more work
than strictly necessary when CONFIG_INET=n, since it will still execute
some of the skb setup in idpf_rx_rsc. However, that work would be performed
in the case where CONFIG_INET=y anyways.
I did not change the existing drivers, since they appear to wrap a
significant portion of code when CONFIG_INET=n. There is little benefit in
trashing these drivers just to unwrap and remove the CONFIG_INET check.
Using a stub for tcp_gro_complete is still beneficial, as it means future
drivers no longer need to worry about this case of CONFIG_NET=y and
CONFIG_INET=n, which should reduce noise from buildbots that check such a
configuration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231013185502.1473541-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that bitmap_*_region() functions are implemented as thin wrappers
around others, it's worth to move them to the header, as it opens room
for compile-time optimizations.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Previously, a fixed abstract distance MEMTIER_DEFAULT_DAX_ADISTANCE is
used for slow memory type in kmem driver. This limits the usage of kmem
driver, for example, it cannot be used for HBM (high bandwidth memory).
So, we use the general abstract distance calculation mechanism in kmem
drivers to get more accurate abstract distance on systems with proper
support. The original MEMTIER_DEFAULT_DAX_ADISTANCE is used as fallback
only.
Now, multiple memory types may be managed by kmem. These memory types are
put into the "kmem_memory_types" list and protected by
kmem_memory_type_lock.
Link: https://lkml.kernel.org/r/20230926060628.265989-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A memory tiering abstract distance calculation algorithm based on ACPI
HMAT is implemented. The basic idea is as follows.
The performance attributes of system default DRAM nodes are recorded as
the base line. Whose abstract distance is MEMTIER_ADISTANCE_DRAM. Then,
the ratio of the abstract distance of a memory node (target) to
MEMTIER_ADISTANCE_DRAM is scaled based on the ratio of the performance
attributes of the node to that of the default DRAM nodes.
The functions to record the read/write latency/bandwidth of the default
DRAM nodes and calculate abstract distance according to read/write
latency/bandwidth ratio will be used by CXL CDAT (Coherent Device
Attribute Table) and other memory device drivers. So, they are put in
memory-tiers.c.
Link: https://lkml.kernel.org/r/20230926060628.265989-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory tiering: calculate abstract distance based on ACPI
HMAT", v4.
We have the explicit memory tiers framework to manage systems with
multiple types of memory, e.g., DRAM in DIMM slots and CXL memory devices.
Where, same kind of memory devices will be grouped into memory types,
then put into memory tiers. To describe the performance of a memory type,
abstract distance is defined. Which is in direct proportion to the memory
latency and inversely proportional to the memory bandwidth. To keep the
code as simple as possible, fixed abstract distance is used in dax/kmem to
describe slow memory such as Optane DCPMM.
To support more memory types, in this series, we added the abstract
distance calculation algorithm management mechanism, provided a algorithm
implementation based on ACPI HMAT, and used the general abstract distance
calculation interface in dax/kmem driver. So, dax/kmem can support HBM
(high bandwidth memory) in addition to the original Optane DCPMM.
This patch (of 4):
The abstract distance may be calculated by various drivers, such as ACPI
HMAT, CXL CDAT, etc. While it may be used by various code which hot-add
memory node, such as dax/kmem etc. To decouple the algorithm users and
the providers, the abstract distance calculation algorithms management
mechanism is implemented in this patch. It provides interface for the
providers to register the implementation, and interface for the users.
Multiple algorithm implementations can cooperate via calculating abstract
distance for different memory nodes. The preference of algorithm
implementations can be specified via priority (notifier_block.priority).
Link: https://lkml.kernel.org/r/20230926060628.265989-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230926060628.265989-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove special cased hugetlb handling code within the page cache by
changing the granularity of ->index to the base page size rather than the
huge page size. The motivation of this patch is to reduce complexity
within the filemap code while also increasing performance by removing
branches that are evaluated on every page cache lookup.
To support the change in index, new wrappers for hugetlb page cache
interactions are added. These wrappers perform the conversion to a linear
index which is now expected by the page cache for huge pages.
========================= PERFORMANCE ======================================
Perf was used to check the performance differences after the patch.
Overall the performance is similar to mainline with a very small larger
overhead that occurs in __filemap_add_folio() and
hugetlb_add_to_page_cache(). This is because of the larger overhead that
occurs in xa_load() and xa_store() as the xarray is now using more entries
to store hugetlb folios in the page cache.
Timing
aarch64
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt
real 1m49.568s
user 0m0.000s
sys 1m49.461s
6.5-rc3:
[root]# time fallocate -l 700GB test.txt
real 1m47.495s
user 0m0.000s
sys 1m47.370s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m47.024s
user 0m0.000s
sys 1m46.921s
6.5-rc3:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m44.551s
user 0m0.000s
sys 1m44.438s
x86
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt
real 0m22.383s
user 0m0.000s
sys 0m22.255s
6.5-rc3:
[opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt
real 0m22.735s
user 0m0.038s
sys 0m22.567s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt
real 0m25.786s
user 0m0.001s
sys 0m25.589s
6.5-rc3:
[root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt
real 0m33.454s
user 0m0.001s
sys 0m33.193s
aarch64:
workload - fallocate a 700GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--95.04%--__pi_clear_page
|
|--3.57%--clear_huge_page
| |
| |--2.63%--rcu_all_qs
| |
| --0.91%--__cond_resched
|
--0.67%--__cond_resched
0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache
0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio
6.5-rc3
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--94.91%--__pi_clear_page
|
|--4.11%--clear_huge_page
| |
| |--3.00%--rcu_all_qs
| |
| --1.10%--__cond_resched
|
--0.59%--__cond_resched
0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio
x86
workload - fallocate a 100GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
hugetlbfs_fallocate
|
--99.57%--clear_huge_page
|
--98.47%--clear_page_erms
|
--0.53%--asm_sysvec_apic_timer_interrupt
0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store
6.5-rc3
2MB Page Size:
--99.93%--__x64_sys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
--99.38%--clear_huge_page
|
|--98.40%--clear_page_erms
|
--0.59%--__cond_resched
0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio
========================= TESTING ======================================
This patch passes libhugetlbfs tests and LTP hugetlb tests
********** TEST SUMMARY
* 2M
* 32-bit 64-bit
* Total testcases: 110 113
* Skipped: 0 0
* PASS: 107 113
* FAIL: 0 0
* Killed by signal: 3 0
* Bad configuration: 0 0
* Expected FAIL: 0 0
* Unexpected PASS: 0 0
* Test not present: 0 0
* Strange test result: 0 0
**********
Done executing testcases.
LTP Version: 20220527-178-g2761a81c4
page migration was also tested using Mike Kravetz's test program.[8]
[dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug]
Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain
Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: add fork-exec support for prctl", v4.
A process can enable KSM with the prctl system call. When the process is
forked the KSM flag is inherited by the child process. However if the
process is executing an exec system call directly after the fork, the KSM
setting is cleared. This patch series addresses this problem.
1) Change the mask in coredump.h for execing a new process
2) Add a new test case in ksm_functional_tests
This patch (of 2):
Today we have two ways to enable KSM:
1) madvise system call
This allows to enable KSM for a memory region for a long time.
2) prctl system call
This is a recent addition to enable KSM for the complete process.
In addition when a process is forked, the KSM setting is inherited.
This change only affects the second case.
One of the use cases for (2) was to support the ability to enable
KSM for cgroups. This allows systemd to enable KSM for the seed
process. By enabling it in the seed process all child processes inherit
the setting.
This works correctly when the process is forked. However it doesn't
support fork/exec workflow.
From the previous cover letter:
....
Use case 3:
With the madvise call sharing opportunities are only enabled for the
current process: it is a workload-local decision. A considerable number
of sharing opportunities may exist across multiple workloads or jobs
(if they are part of the same security domain). Only a higler level
entity like a job scheduler or container can know for certain if its
running one or more instances of a job. That job scheduler however
doesn't have the necessary internal workload knowledge to make targeted
madvise calls.
....
In addition it can also be a bit surprising that fork keeps the KSM
setting and fork/exec does not.
Link: https://lkml.kernel.org/r/20230922211141.320789-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230922211141.320789-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Fixes: d7597f59d1d3 ("mm: add new api to enable ksm per process")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Carl Klemm <carl@uvos.xyz>
Tested-by: Carl Klemm <carl@uvos.xyz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The cpupid (or access time) is stored in the head page for THP, so it is
safely to make should_numa_migrate_memory() and numa_hint_fault_latency()
to take a folio. This is in preparation for large folio numa balancing.
Link: https://lkml.kernel.org/r/20230921074417.24004-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for large folio numa balancing, make mpol_misplaced() to
take a folio, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: convert numa balancing functions to use a folio", v2.
do_numa_pages() only handles non-compound pages, and only PMD-mapped THPs
are handled in do_huge_pmd_numa_page(). But a large, PTE-mapped folio
will be supported so let's convert more numa balancing functions to
use/take a folio in preparation for that, no functional change intended
for now.
This patch (of 6):
The new vm_normal_folio_pmd() wrapper is similar to vm_normal_folio(),
which allow them to completely replace the struct page variables with
struct folio variables.
Link: https://lkml.kernel.org/r/20230921074417.24004-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230921074417.24004-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
TCP pingpong threshold is 1 by default. But some applications, like SQL DB
may prefer a higher pingpong threshold to activate delayed acks in quick
ack mode for better performance.
The pingpong threshold and related code were changed to 3 in the year
2019 in:
commit 4a41f453bedf ("tcp: change pingpong threshold to 3")
And reverted to 1 in the year 2022 in:
commit 4d8f24eeedc5 ("Revert "tcp: change pingpong threshold to 3"")
There is no single value that fits all applications.
Add net.ipv4.tcp_pingpong_thresh sysctl tunable, so it can be tuned for
optimal performance based on the application needs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/1697056244-21888-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
uvesafb_exec() is a static function defined and called only in
drivers/video/fbdev/uvesafb.c, remove the prototype from
include/video/uvesafb.h.
Fixes the warning:
./include/video/uvesafb.h:112:12: warning: 'uvesafb_exec' declared 'static' but never defined [-Wunused-function]
when including '<video/uvesafb.h>' in an external program.
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.7:
- correct meson_sm_* API retval handling
- Use device_get_match_data() in meson SM
* tag 'amlogic-drivers-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson: Use device_get_match_data()
drivers: meson: sm: correct meson_sm_* API retval handling
Link: https://lore.kernel.org/r/00ef6ab3-59c1-484a-9d70-50f16e4cc584@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.7-rc1
Contains a typofix and a new mechanism to help fix an issue that can
seemingly hang the system during early resume.
* tag 'tegra-for-6.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Add suspend hook and reset BPMP IPC early on resume
firmware: tegra: Fix a typo
Link: https://lore.kernel.org/r/20231013153723.1729109-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.7
The main addition is the initial support for the notifications and
memory transaction descriptor changes added in FF-A v1.1 specification.
The notification mechanism enables a requester/sender endpoint to notify
a service provider/receiver endpoint about an event with non-blocking
semantics. A notification is akin to the doorbell between two endpoints
in a communication protocol that is based upon the doorbell/mailbox
mechanism.
The framework is responsible for the delivery of the notification from
the ender to the receiver without blocking the sender. The receiver
endpoint relies on the OS scheduler for allocation of CPU cycles to
handle a notification.
OS is referred as the receiver’s scheduler in the context of notifications.
The framework is responsible for informing the receiver’s scheduler that
the receiver must be run since it has a pending notification.
The series also includes support for the new format of memory transaction
descriptors introduced in v1.1 specification.
Apart from the main additions, it includes minor fixes to re-enable FF-A
drivers usage of 32bit mode of messaging and kernel warning due to the
missing assignment of IDR allocation ID to the FFA device. It also adds
emitting 'modalias' to the base attribute of FF-A devices.
* tag 'ffa-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Upgrade the driver version to v1.1
firmware: arm_ffa: Update memory descriptor to support v1.1 format
firmware: arm_ffa: Switch to using ffa_mem_desc_offset() accessor
KVM: arm64: FFA: Remove access of endpoint memory access descriptor array
firmware: arm_ffa: Simplify the computation of transmit and fragment length
firmware: arm_ffa: Add notification handling mechanism
firmware: arm_ffa: Add interface to send a notification to a given partition
firmware: arm_ffa: Add interfaces to request notification callbacks
firmware: arm_ffa: Add schedule receiver callback mechanism
firmware: arm_ffa: Initial support for scheduler receiver interrupt
firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_SET interface
firmware: arm_ffa: Implement the FFA_RUN interface
firmware: arm_ffa: Implement the notification bind and unbind interface
firmware: arm_ffa: Implement notification bitmap create and destroy interfaces
firmware: arm_ffa: Update the FF-A command list with v1.1 additions
firmware: arm_ffa: Emit modalias for FF-A devices
firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging
firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device
Link: https://lore.kernel.org/r/20231010124354.1620064-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.7-1
* Merge "Drop runtime PM support for Baytrail and Lynxpoint pinctrl" (Raag)
* Small improvements here and there in the Intel pin control drivers (Raag)
* Switch to RAII for locking in the Intel core and Cherry View drivers
* Enable non-ACPI enumeration in the Intel Denverton driver
* Use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() in a couple of drivers
* Introduce array_size.h and use in in the Intel pin control drivers
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace kernel.h by what is actually being used
- drop runtime PM support
- fix debounce disable case
broxton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
cherryview:
- reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
- Convert to platform remove callback returning void
- Simplify code with cleanup helpers
- Avoid duplicated I/O
- Replace kernel.h by what is actually being used
denverton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
- Enable platform device in the absence of ACPI enumeration
intel:
- fetch community only when we need it
- refine intel_config_set_pull() function
- Replace kernel.h by what is actually being used
- Simplify code with cleanup helpers
lynxpoint:
- Replace kernel.h by what is actually being used
- drop runtime PM support
merrifield:
- Replace kernel.h by what is actually being used
moorefield:
- Replace kernel.h by what is actually being used
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.
Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We need the char/misc fixes in here as well, to build on for other
changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding functions that USB hub code can use to inform the
Type-C class about connected USB devices.
Once taken into use, it will allow the Type-C port drivers
to power off components that are not needed, for example if
USB2 device is enumerated, everything that is only relevant
for USB3 (retimers, etc.), can be powered off.
This will also create a symlink "typec" for the USB devices
pointing to the USB Type-C partner device.
Suggested-by: Benson Leung <bleung@chromium.org>
Tested-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231011105825.320062-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add an initial user for the newly added tcf_set_drop_reason() helper to set the
drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify().
Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic
fallback indicator to mark drop locations. Where needed, such locations can be
converted to more specific codes, for example, when hitting the reclassification
limit, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only
express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason.
Victor kicked-off an initial proposal to make this more flexible by disambiguating
verdict from return code by moving the verdict into struct tcf_result and
letting tcf_classify() return a negative error. If hit, then two new drop
reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR
as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual
error codes would have required to attach to tcf_classify via kprobe/kretprobe
to more deeply debug skb and the returned error.
In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more
extensible, it can be addressed in a more straight forward way, that is: Instead
of placing the verdict into struct tcf_result, we can just put the drop reason
in there, which does not require changes throughout various classful schedulers
given the existing verdict logic can stay as is.
Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason
to disambiguate between an error or an intentional drop. New drop reason error
codes can be added successively to the tc code base.
For internal error locations which have not yet been annotated with a
SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and
SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a
SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones
if it is found that they would be useful for troubleshooting.
While drop reasons have infrastructure for subsystem specific error codes which
are currently used by mac80211 and ovs, Jakub mentioned that it is preferred
for tc to use the enum skb_drop_reason core codes given it is a better fit and
currently the tooling support is better, too.
With regards to the latter:
[...] I think Alastair (bpftrace) is working on auto-prettifying enums when
bpftrace outputs maps. So we can do something like:
$ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }'
Attaching 1 probe...
^C
@[SKB_DROP_REASON_TC_INGRESS]: 2
@[SKB_CONSUMED]: 34
^^^^^^^^^^^^ names!!
Auto-magically. [...]
Add a small helper tcf_set_drop_reason() which can be used to set the drop reason
into the tcf_result.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Other tracepoints use "cq.id=" rather than "cq_id=". Let's make it
more reliable to grep for the CQ restracker ID.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I'd like to convert nfsd4_encode_fattr() to rotate through the
attrmask using for_each_bit() instead of explicitly testing the
bitmask for each bit value. This means I need the bit numbers, as
defined in the specs, instead of our internal bitmask constants.
As a clean up, use the new spec-derived values to define the WORD#
bitmask constants.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor the encoder for FATTR4_CHANGE into a helper. In a
subsequent patch, this helper will be called from a bitmask loop.
The code is restructured a bit to use the modern xdr_stream flow,
and the encoded cinfo value is made const so that callers of the
encoders can be passed a const cinfo.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce rpc_status netlink support for NFSD in order to dump pending
RPC requests debugging information from userspace.
Closes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=366
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Generate stubs and uAPI for nfsd netlink protocol. For the moment,
the new protocol has one operation: rpc_status.
The generated header and source files are created by running:
tools/net/ynl/ynl-regen.sh
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This removes the need to store and update back-links in the list.
It also remove the need for the _bh version of spin_lock().
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
sp_lock is now only used to protect sp_all_threads. This isn't needed
as sp_all_threads is only manipulated through svc_set_num_threads(),
which is already serialized. Read-acccess only requires rcu_read_lock().
So no more locking is needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Using an atomic_t avoids the need to take a spinlock (which can soon be
removed).
Choosing a thread to kill needs to be careful as we cannot set the "die
now" bit atomically with the test on the count. Instead we temporarily
increase the count.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lwq avoids using back pointers in lists, and uses less locking.
This introduces a new spinlock, but the other one will be removed in a
future patch.
For svc_clean_up_xprts(), we now dequeue the entire queue, walk it to
remove and process the xprts that need cleaning up, then re-enqueue the
remaining queue.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently if several items of work become available in quick succession,
that number of threads (if available) will be woken. By the time some
of them wake up another thread that was already cache-warm might have
come along and completed the work. Anecdotal evidence suggests as many
as 15% of wakes find nothing to do once they get to the point of
looking.
This patch changes svc_pool_wake_idle_thread() to wake the first thread
on the queue but NOT remove it. Subsequent calls will wake the same
thread. Once that thread starts it will dequeue itself and after
dequeueing some work to do, it will wake the next thread if there is more
work ready. This results in a more orderly increase in the number of
busy threads.
As a bonus, this allows us to reduce locking around the idle queue.
svc_pool_wake_idle_thread() no longer needs to take a lock (beyond
rcu_read_lock()) as it doesn't manipulate the queue, it just looks at
the first item.
The thread itself can avoid locking by using the new
llist_del_first_this() interface. This will safely remove the thread
itself if it is the head. If it isn't the head, it will do nothing.
If multiple threads call this concurrently only one will succeed. The
others will do nothing, so no corruption can result.
If a thread wakes up and finds that it cannot dequeue itself that means
either
- that it wasn't woken because it was the head of the queue. Maybe the
freezer woke it. In that case it can go back to sleep (after trying
to freeze of course).
- some other thread found there was nothing to do very recently, and
placed itself on the head of the queue in front of this thread.
It must check again after placing itself there, so it can be deemed to
be responsible for any pending work, and this thread can go back to
sleep until woken.
No code ever tests for busy threads any more. Only each thread itself
cares if it is busy. So svc_thread_busy() is no longer needed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
lwq is a FIFO single-linked queue that only requires a spinlock
for dequeueing, which happens in process context. Enqueueing is atomic
with no spinlock and can happen in any context.
This is particularly useful when work items are queued from BH or IRQ
context, and when they are handled one at a time by dedicated threads.
Avoiding any locking when enqueueing means there is no need to disable
BH or interrupts, which is generally best avoided (particularly when
there are any RT tasks on the machine).
This solution is superior to using "list_head" links because we need
half as many pointers in the data structures, and because list_head
lists would need locking to add items to the queue.
This solution is superior to a bespoke solution as all locking and
container_of casting is integrated, so the interface is simple.
Despite the similar name, this solution meets a distinctly different
need to kfifo. kfifo provides a fixed sized circular buffer to which
data can be added at one end and removed at the other, and does not
provide any locking. lwq does not have any size limit and works with
data structures (objects?) rather than data (bytes).
A unit test for basic functionality, which runs at boot time, is included.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Gow <davidgow@google.com>
Cc: linux-kernel@vger.kernel.org
Message-Id: <20230911111333.4d1a872330e924a00acb905b@linux-foundation.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
llist_del_first_this() deletes a specific entry from an llist, providing
it is at the head of the list. Multiple threads can call this
concurrently providing they each offer a different entry.
This can be uses for a set of worker threads which are on the llist when
they are idle. The head can always be woken, and when it is woken it
can remove itself, and possibly wake the next if there is an excess of
work to do.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With an llist we don't need to take a lock to add a thread to the list,
though we still need a lock to remove it. That will go in the next
patch.
Unlike double-linked lists, a thread cannot reliably remove itself from
the list. Only the first thread can be removed, and that can change
asynchronously. So some care is needed.
We already check if there is pending work to do, so we are unlikely to
add ourselves to the idle list and then want to remove ourselves again.
If we DO find something needs to be done after adding ourselves to the
list, we simply wake up the first thread on the list. If that was us,
we successfully removed ourselves and can continue. If it was some
other thread, they will do the work that needs to be done. We can
safely sleep until woken.
We also remove the test on freezing() from rqst_should_sleep(). Instead
we set TASK_FREEZABLE before scheduling. This makes is safe to
schedule() when a freeze is pending. As we now loop waiting to be
removed from the idle queue, this is a cleaner way to handle freezing.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With list.h lists, it is easy to test if a node is on a list, providing
it was initialised and that it is removed with list_del_init().
This patch provides similar functionality for llist.h lists.
init_llist_node()
marks a node as being not-on-any-list be setting the ->next pointer to
the node itself.
llist_on_list()
tests if the node is on any list.
llist_del_first_init()
remove the first element from a llist, and marks it as being off-list.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
